Can recommend a radio for this phone? It was originally for Rogers, unlocked, rooted, and I'm using blackstar jelly bean.
At first i used the SGH-T989D TLMC4 radio, only worked well downtown Mississauga.
Right now I'm using the Blaze 4G UVMB1, radio, works a lot better but I live on the edge of coverage so it's spotty at best when I am at home.
So if you have an experience, please give me a recommendation.
This is my exact set up man, good to see someone on this site on the same boat. I've noticed that the T98 works better on 4.2 for some reason. I get really poor reception in my room (switches from mobilicity to CND roaming allot). But on 4.2 I was able to make calls and send text more reliably. Try "kid blaze" though it doesn't show any signal bars but it connects pretty well
boyboy1222222222222222 said:
This is my exact set up man, good to see someone on this site on the same boat. I've noticed that the T98 works better on 4.2 for some reason. I get really poor reception in my room (switches from mobilicity to CND roaming allot). But on 4.2 I was able to make calls and send text more reliably. Try "kid blaze" though it doesn't show any signal bars but it connects pretty well
Click to expand...
Click to collapse
Well blackstar jelly bean works really well so I'm hesitant to change. I disabled roaming by making it connect only on the 1700mhz frequency, I don't see it disconnect to much.
Err what's "kid blaze"? I assume its the KID based ICS radio on this page?
http://forum.xda-developers.com/showthread.php?t=1679722
I tried flashing to it but under "baseband version" it says "unknown" and there's no signal whatsoever. I reverted back to my backup with the Blaze 4G radio. It's strange I tried using the t-mobile note modems and they don't work but Samsung s2 and s1 modems work.
chickenla said:
Well blackstar jelly bean works really well so I'm hesitant to change. I disabled roaming by making it connect only on the 1700mhz frequency, I don't see it disconnect to much.
Err what's "kid blaze"? I assume its the KID based ICS radio on this page?
http://forum.xda-developers.com/showthread.php?t=1679722
I tried flashing to it but under "baseband version" it says "unknown" and there's no signal whatsoever. I reverted back to my backup with the Blaze 4G radio. It's strange I tried using the t-mobile note modems and they don't work but Samsung s2 and s1 modems work.
Click to expand...
Click to collapse
thats the thing with this modem, it wont show any info but it connects somehow, once it says "mobilicity" in your notification pulldown, you should be connected. i tested it for a couple weeks and it worked pretty well,this is the convo i had about it http://forum.xda-developers.com/showthread.php?p=42369927#post42369927
side note: i remember reading somewhere that you had you input a code in the dialer like "#266#" and it would give a menu option to select the 1700 band. when you changed the band to only 1700 did it reduce the roaming a lot? when i check my signal stats in setting, it says im roaming like 50% of the time
boyboy1222222222222222 said:
thats the thing with this modem, it wont show any info but it connects somehow, once it says "mobilicity" in your notification pulldown, you should be connected. i tested it for a couple weeks and it worked pretty well,this is the convo i had about it http://forum.xda-developers.com/showthread.php?p=42369927#post42369927
side note: i remember reading somewhere that you had you input a code in the dialer like "#266#" and it would give a menu option to select the 1700 band. when you changed the band to only 1700 did it reduce the roaming a lot? when i check my signal stats in setting, it says im roaming like 50% of the time
Click to expand...
Click to collapse
I input *#2263# to select wcdma 1700 only. Disables roaming completely. I don't disconnect that often.
I guess I'll stick with the Blaze 4G UVMB1 modem then, it works and shows my signal strength. I got it from here:
http://forum.xda-developers.com/showthread.php?t=1895400
If I decide to switch back to default in order to receive enable roaming, how do I go about doing so?
boyboy1222222222222222 said:
If I decide to switch back to default in order to receive enable roaming, how do I go about doing so?
Click to expand...
Click to collapse
Just switch back to automatic.
I just ported my number to Wind. Reception is a ton better than Mobilicity. So glad to leave them, they were dirt cheap but you get what you pay for. I even get 200$ for addon credits.... kick ass
Related
Strating a new topic to figure out which radio works better on T-Mobile for AT&T JB update.
Before JB update, like several other people on this forum, I have been using i717 on T-Mobile network . 4G has been working fine with GT-N7005-IMM76D-DXLJ2 Rom and UVLG3modemfori717_gt-n7005amss radio.
1. UVLG3 modem with GT7005 amss gives no signal.
2. UVLG3 modem with JB amss gives no signal.
3. Stock radio and amss in JB update only connects to Edge. (unless you are in area where T-Mobile has 3g on 1900?)
4. Blaze ICS modem connects to 4g but signal bars are not shown in status bar.
For the best modem so far, check the below post...
http://forum.xda-developers.com/showthread.php?p=41052527
If anybody else tried any other combinations, please post your experience in this thread.
Thanks.
same here plus i try it with Telus modems too not signal (signal comes and gone)
I made my own combo for WIND in Canada (confirmed to work on T-Mobile with much higher speeds). It's really slow (about 1 Mbps down and 50 kbps up) but at least it works (good voice/signal strength and somewhat usable data)
It's the SGH-T989D (Telus Galaxy S II X) latest modem (TLMC4) and AMSS from the old Blaze modem posted around this forum. Just flash it with CWM.
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
Steps:
1. Flash in CWM
2. On reboot, do a network scan
3. Open dialer, dial *#2263# and select WCDMA Prefs -> WCDMA 1700
4. Do network scan again, WIND (or whatever your AWS provider is) should appear. Select it and it should register.
5. You can multi task back to the service mode and go back and select "[1] Automatic" to use all bands again.
No responsibility if it bricks your phone, it works on my SGH-i717R without issues
OT: I also tried SGH-T989D_TLMC4_radio.zip and it works on Bell/Telus/Rogers without any mods. However, trying any T989 combos never really worked (some did, but data kept dropping).
windroidHD said:
Strating a new topic to figure out which radio works better on T-Mobile for AT&T JB update.
Before JB update, like several other people on this forum, I have been using i717 on T-Mobile network . 4G has been working fine with GT-N7005-IMM76D-DXLJ2 Rom and UVLG3modemfori717_gt-n7005amss radio.
1. UVLG3 modem with GT7005 amss gives no signal.
2. UVLG3 modem with JB amss gives no signal.
3. Stock radio and amss in JB update only connects to Edge. (unless you are in area where T-Mobile has 4g on 1900?)
4. Blaze ICS mpdem connects to 4g but signal bars are not shown in status bar.
If anybody else tried any other combinations, please post your experience in this thread.
Thanks.
Sent from here.
Click to expand...
Click to collapse
This is an important thread for this forum. I'm in the same situation, utilizing the AT&T rom on an AT&T device, and trying to use it on T-Mobile.
My experience has been strange. I am using the stock firmware radio with the AT&T JB update, and I seem to connect to 4G randomly on T-Mobile, switching between UMTS:3 and HSPAP15. I am usually on Edge more often than "4G". I don't have LTE in my area, and "3G" on 1900 doesn't work on my Wife's Iphone.
I tried the UVLG3 Modem for i717, and got no signal at all.
I haven't tried the Blaze modem. What I want to know, is what is the experience with Blaze when you look at system status? UMTS:3? HSPAP?
I am on stock modem in JB rom right now, shows UMTS3 in status.
Nothing strange about that, it is in UMTS when data is idle, anything else is when data is active.
You only get 3G on T-Mobile if its a "re-farmed" 1900 MHz region, where they moved 3G from AWS to 1900 MHz. If you go outside your zone you will only have 2G.
zivan56 said:
Nothing strange about that, it is in UMTS when data is idle, anything else is when data is active.
You only get 3G on T-Mobile if its a "re-farmed" 1900 MHz region, where they moved 3G from AWS to 1900 MHz. If you go outside your zone you will only have 2G.
Click to expand...
Click to collapse
What is HSPAP:15 considered? HSPA 15Mbps? Is that at 1700MHz or 1900Mhz?
crazeco said:
What is HSPAP:15 considered? HSPA 15Mbps? Is that at 1700MHz or 1900Mhz?
Click to expand...
Click to collapse
You would have to go to field test mode to find out, Android does not have such details. Dial *#0011# and find at the very top "RRC: .. BandX," where X is a number. Is it 4 (AWS) or 2 (1900Mhz)?
There may be an item (radio dependant) called DC_HSPA to indicate whether its dual cell HSPA(+). Post a screenshot and I can check it for you.
zivan56 said:
I made my own combo for WIND in Canada. It's really slow (about 1 Mbps down and 50 kbps up) but at least it works (good voice/signal strength and somewhat usable data)
It's the Blaze 4G latest modem (T769-UVMB1) and AMSS from the old Blaze modem posted around this forum. Just flash it with CWM.
http://www.speedyshare.com/YTNEb/T769-UVMB1-amss-from-blaze.zip
Steps:
1. Flash in CWM
2. On reboot, do a network scan
3. Open dialer, dial *#2263# and select WCDMA Prefs -> WCDMA 1700
4. Do network scan again, WIND (or whatever your AWS provider is) should appear. Select it and it should register.
5. You can multi task back to the service mode and go back and select
No responsibility if it bricks your phone, it works on my SGH-i717R without issues
OT: I also tried SGH-T989D_TLMC4_radio.zip and it works on Bell/Telus/Rogers without any mods. However, trying any T989 combos never really worked (some did, but data kept dropping).
Click to expand...
Click to collapse
With the T989D_TLMC4_radio i got the most sickiest DL ever on CM 10.1 but cant make calls only data and text did you think can modify to work on TMO.
BTW right now o using Telus TELL4 modem and work amazing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Mervingio said:
With the T989D_TLMC4_radio i got the most sickiest DL ever on CM 10.1 but cant make calls only data and text did you think can modify to work on TMO.
BTW right now o using Telus TELL4 modem and work amazing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, can you try this. I've tested it a bit on WIND and data/voice works...the data is slighly more stable/faster (still around 1.5 Mbps/50 Kbps for me)
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
IT works for me on WIND, so it should work on T-Mobile. Same steps as in my previous post above to get it to see AWS carriers. If your T-Mobile service is 1900 MHz, it may just work without any of those steps.
Btw, for some reason it only sees WIND (the modem is non WIND specific) and no other AWS carriers (i.e Mobilicity) when set to WCDMA 1700. No idea why.
I
zivan56 said:
Hmm, can you try this. I've tested it a bit on WIND and data/voice works...the data is slighly more stable/faster (still around 1.5 Mbps/50 Kbps for me)
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
IT works for me on WIND, so it should work on T-Mobile. Same steps as in my previous post above to get it to see AWS carriers. If your T-Mobile service is 1900 MHz, it may just work without any of those steps.
Btw, for some reason it only sees WIND (the modem is non WIND specific) and no other AWS carriers (i.e Mobilicity) when set to WCDMA 1700. No idea why.
Click to expand...
Click to collapse
Tried it, signal strength went from 2 bars with stock modem to 4 bars, status shows UMTS3 when idle and switches to HSPAP:15 briefly.
Speed test
outside the house 7000kbps/1000kbps
Inside the house 1650kbps/66kbps
*#0011# shows rrc band 4, previously it was band 2.
*#2263# doesn't shows any item with * infront, previously automatic had * infront of it.
Tried setting wcdma to 1700 and saw the same performance, rrc band4 and switching between umts3 and hspap:15.
Havn't tested call quality but this has been the best modem so far.
Thanks for sharing.
zivan56 said:
Hmm, can you try this. I've tested it a bit on WIND and data/voice works...the data is slighly more stable/faster (still around 1.5 Mbps/50 Kbps for me)
http://speedy.sh/uyHBp/SGH-T989D-TLMC4-amss-from-blaze.zip
IT works for me on WIND, so it should work on T-Mobile. Same steps as in my previous post above to get it to see AWS carriers. If your T-Mobile service is 1900 MHz, it may just work without any of those steps.
Btw, for some reason it only sees WIND (the modem is non WIND specific) and no other AWS carriers (i.e Mobilicity) when set to WCDMA 1700. No idea why.
Click to expand...
Click to collapse
not sure why but with this ROM (jelly bean) i can lock DC-HSPA8+ and damn it go fast!!!!
this pics are with your modem i will test later today when i go to the mall now works perfect!
Thanks for the help
zivan56 said:
You would have to go to field test mode to find out, Android does not have such details. Dial *#0011# and find at the very top "RRC: .. BandX," where X is a number. Is it 4 (AWS) or 2 (1900Mhz)?
There may be an item (radio dependant) called DC_HSPA to indicate whether its dual cell HSPA(+). Post a screenshot and I can check it for you.
Click to expand...
Click to collapse
I'm now using the Blaze radios posted by Zivan in the link above. I'm getting Band 4 CPCH and FCPH and DCH. Averaging around 3-6Mbps down and 300Kbps up.
crazeco said:
I'm now using the Blaze radios posted by Zivan in the link above. I'm getting Band 4 CPCH and FCPH and DCH. Averaging around 3-6Mbps down and 300Kbps up.
Click to expand...
Click to collapse
Great!!
Mervingio said:
Great!!
Click to expand...
Click to collapse
To be honest, I'm getting better T-Mobile 4g reception with that modified Blaze radio on JB than I did on ICS with UVLG3. Not going to complain!
Anybody managed to get LTE with a JB rom yet?
Question ?.........I picked wcdma 1700 and I'm getting crazy good speeds ....9down 2up..sometimes better What is safe cpu temps? Cause I think it may be heating up
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Wow, good to hear folks...I'm getting rather terrible speeds on WIND. But the phone works, I did a bunch of calling/texting/data usage and its been stable for over a day.
Well I had to reflash for some reason it was picking up excellent speeds then poof gone .. tried changing back to 1900... nothing .. so I reflashed and just picked automatic
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
First time posting on here so please don't tear me a new ass if I'm doing something wrong lol.
I just got a Galaxy Note I (SGH-I717) on AT&T.
Initially I was having problems with reception and 4G and not getting LTE at all. I finally got LTE working my setting up the PTA APN and by dialing *#2263# and selecting a different preferred band (I chose "LTE ALL" in the LTE sub-menu and saved it). I put the SIM back in, powered the phone back up and LTE was working. However my signal bars haven't gone past one bar while on LTE. I get data, and can even send and receive MMS/SMS, but cannot send/receive calls.
Someone please tell me if I did something wrong or am leaving out any vital info.
Sent from my big, slow SAMSUNG-SGH-I717 using xda app-developers app
beefjelly said:
First time posting on here so please don't tear me a new ass if I'm doing something wrong lol.
I just got a Galaxy Note I (SGH-I717) on AT&T.
Initially I was having problems with reception and 4G and not getting LTE at all. I finally got LTE working my setting up the PTA APN and by dialing *#2263# and selecting a different preferred band (I chose "LTE ALL" in the LTE sub-menu and saved it). I put the SIM back in, powered the phone back up and LTE was working. However my signal bars haven't gone past one bar while on LTE. I get data, and can even send and receive MMS/SMS, but cannot send/receive calls.
Someone please tell me if I did something wrong or am leaving out any vital info.
Click to expand...
Click to collapse
Perhaps the radio should be updated. The latest official ATT radio is UCMD3.
Check if you have it under settings/about/phone status/baseband. It works on all builds but is the newest radio which improves signal sometimes.
scariola said:
Perhaps the radio should be updated. The latest official ATT radio is UCMB3.
Check if you have it under settings/about/phone status/baseband. It works on all builds but is the newest radio which improves signal sometimes.
Click to expand...
Click to collapse
I attached a screen shot of my baseband. Does this look correct?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
beefjelly said:
I attached a screen shot of my baseband. Does this look correct?
Click to expand...
Click to collapse
That is infact the newest radio. Unfortunately I'm rockin this phone on T-Mobile, maybe some other people could chime in on ATT.
Apn settings sometimes make a difference. So check this thread on that here... http://forum.xda-developers.com/showthread.php?p=26821716
scariola said:
That is infact the newest radio. Unfortunately I'm rockin this phone on T-Mobile, maybe some other people could chime in on ATT.
Apn settings sometimes make a difference. So check this thread on that here... http://forum.xda-developers.com/showthread.php?p=26821716
Click to expand...
Click to collapse
I'm pretty positive that my APN settings are correct (I'll post them in a minute), I think it is probably the band preference I selected in the *#2263# menu. I do know for a fact that the SGH-I717 runs on the lowest LTE band.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Here are the APN settings I'm using at the moment.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
beefjelly said:
Here are the APN settings I'm using at the moment.
Click to expand...
Click to collapse
Those appear to be as follows in the link I posted. The only difference i saw was BEARER: LTE (default is unspecified) play with this one.. that was different in the post.
Other then that, I know ATT and Tmobile only use LTE Band 4 in the USA anyways.
So LTE ALL under the service menu wouldnt help. Was your coverage always that bad?
Please someone with ATT help this poor soul out. I'm at wits end. Usually this would be something to bug your service provider about. Myabe they can refresh something on your account, or give you a newer SIM card at your local store.
scariola said:
Those appear to be as follows in the link I posted. The only difference i saw was BEARER: LTE (default is unspecified) play with this one.. that was different in the post.
Other then that, I know ATT and Tmobile only use LTE Band 4 in the USA anyways.
So LTE ALL under the service menu wouldnt help. Was your coverage always that bad?
Please someone with ATT help this poor soul out. I'm at wits end. Usually this would be something to bug your service provider about. Myabe they can refresh something on your account, or give you a newer SIM card at your local store.
Click to expand...
Click to collapse
Yes, unfortunately service has always been this bad. I have called AT&T several times/been to the AT&T store and talked to a representative and they have done the following:
- Checked/rechecked my IMEI number (it always matches)
- Checked and rechecked my SIM number (before AND after I received a new SIM card
- Unregistered/Re-registered my phone with the towers
- Called a tech out to the tower to make sure nothing is going on the them (I know its not, my buddies all have LTE running fine on their devices)
Thank you so much, scariola. You've been a helped all you can.
RESOLVED
I believe I have fixed the problem.
I dialed *#2263# to get to the Band Selection screen. I already had selected "LTE ALL" under the LTE Preference menu. I unselected it, chose Back and then End (both under the softkey menu). I then re-dialed *#2263# to get back into the Band Selection menu except this time I selected "Automatic" and chose End in the softkey menu. Re-inserted SIM, and rebooted.
No I get signal 3-5 bars, 4G and 4G LTE where strong signal is available.
I thought LTE was only data and could not be used for calls.
Agoattamer said:
I thought LTE was only data and could not be used for calls.
Click to expand...
Click to collapse
Right. The data is the 3g/4g connection and the symbol next to the bars is the data speed. The bars is the strength of the gsm/phone signal.
It actually sounds like the OP was involved in a tower maintenance scenario and probably didn't matter what he did.
You can do the same settings changing from the mobile data settings menu.
You can't do the same settings from the mobile data settings menu. There you can only mess with data bands. You can turn LTE off or on on my Canadian ROM but you can't use it as the only band. And I didn't think you could even change this on ATT ROMs/radios at all. I believe he used LTE as the one and only bands for phone and data which caused his issue. I have achieved this same result by messing with those band setting found by *#2263#.
However the ability to send/receive texts but no calls does not make sense. That could have been tower issues since they both use the same phone band.
Agoattamer said:
You can't do the same settings from the mobile data settings menu. There you can only mess with data bands. You can turn LTE off or on on my Canadian ROM but you can't use it as the only band. And I didn't think you could even change this on ATT ROMs/radios at all.
Click to expand...
Click to collapse
Er, what?
Is that a JB thing because I know it wasn't present on the ATT ICS ROM. Also where is the LTE setting??
The default is "fastest available". If you choose the high speed setting, it will connect to whatever is best.
I assumed JB stock because the OP said he just got the phone.
Agoattamer said:
Is that a JB thing because I know it wasn't present on the ATT ICS ROM. Also where is the LTE setting??
Click to expand...
Click to collapse
It's on the canadian version of JB in the settings/mobile network. Missing from att JB though.
You can however force LTE only through the service menu. Att and tmobile use band 4. Not sure about anyone else.
You must dial *#2263# into dialer and select LTE and choose the band your provider supports. That will force LTE only. Dial the same thing into dialer and select automatic* to go back to jumping through LTE/WCDMA/GSM.
I understand it is on the Canadian version as I am using it. The Canadian version also includes LTE. I know how this all works. I have a Rogers note. But my question was to ranger on where he pulled that screenshot from. I always had an LTE option both on ICS and JB. And it was my understanding that ATT left this feature out on all versions and their modem was locked.
Sent from my SGH-I717R using xda premium
You can't force LTE if its not available. Its best to leave it at auto and let the modem do Its job of connecting to the best signal.
rangercaptain said:
Right. The data is the 3g/4g connection and the symbol next to the bars is the data speed. The bars is the strength of the gsm/phone signal.
It actually sounds like the OP was involved in a tower maintenance scenario and probably didn't matter what he did.
You can do the same settings changing from the mobile data settings menu.
Click to expand...
Click to collapse
It may have been, but soon after I *thought* I had fixed the problem, the same issue restarted. I believe it was an issue with the phone hardware itself, maybe the antenna. I don't know. I sold the phone and got an S3.
No problems with the S3 :good:
I used to have that problem until i changed the MNC to 260
After almost a year of inputting various *# and #* codes, I finally got my i717 to work on T-Mobile LTE (southside of greater Chicagoland).
This is on stock ATT JB rom and modem. On a good day I will get over 20Mbps down and 8-10Mbps up. epc.tmobile apn worked best at first, but after about a day or so, fast.tmobile apn setting did about the same. Service mode is set to Automatic and the setting in Device Info *#*#4636#*#* was set to LTE/GSM/WCDMA.
I thought all was fine until I would leave an LTE area and go into a normally (for me) 4g area
What is happening now is that I lose my LTE and go straight into EDGE. It is almost like my regular 4g is gone in areas where it used to be pretty good
Before LTE working, I was getting pretty good 4g (between 4-9Mbps down and about 1 up). This was using the same stock ATT JB rom, but with T-Mobile Blaze modem. Very seldom, like almost never, would I see EDGE. To get this I would have to go into service mode *#2263# and select WCDMA as my band preference.
If I try to use the Blaze modem, I cannot get the phone to stay in the LTE/GSM/WCDMA setting.
In a nutshell, why am I going to EDGE instead of 4g when I leave LTE?
If it matters, I am on the 5G / 100 minute $30 prepaid plan
TIA
Pretty common problem with the JB modem. You pull LTE or you pull E. For me, the best modem is UCMB4. It's an ICS modem, though, so I'm not sure how it'll work on jellybean. But you may give it a try. I pull the best speeds -- by far -- with it, and I pull consistent LTE. With the different ported modems I would have calls not go through sometimes -- weird -- and just "okay" speeds. With the ucmb4 I get solid all-around service.
I've gone from TMobile LTE to regular 4g on my mostly stock Note in Chicago. No AWS mod, no code messin, no nothin.
ATT modems will only work with tmobile refarmed 1900mhz areas. Your blaze modem is set to 1700mhz frequency band instead of 1900mhz. Thats why it works better.
Tmobile has a lot of dead areas on regular 4g with the LTE capable modem. But that's the tradeoff. Lte and refarmed 1900mhz band or just regular old 4g hspa.
no phone on Tmo 4g LTE in STL
Hey guys,
I've recently run into a problem with my unlocked i717 on TMO. It runs Android 4.1.2 (AT&T update flashed to the phone) but every since TMO rolled out their LTE in my area I get 4G LTE signals (1 or 2 bars mostly, but at times 3-4 bars) and I can send texts and data, but it cancels both incoming and outgoing phone calls.? What can I do to correct this? TMO's solution is to buy the N2 or wait til Nov for the N3. Any ideas?
Thanks...
Pete
amateursarto said:
Hey guys,
I've recently run into a problem with my unlocked i717 on TMO. It runs Android 4.1.2 (AT&T update flashed to the phone) but every since TMO rolled out their LTE in my area I get 4G LTE signals (1 or 2 bars mostly, but at times 3-4 bars) and I can send texts and data, but it cancels both incoming and outgoing phone calls.? What can I do to correct this? TMO's solution is to buy the N2 or wait til Nov for the N3. Any ideas?
Thanks...
Pete
Click to expand...
Click to collapse
Make sure your using the UCMD3 modem for JB. Then type *#2263# into dialer and try to set to automatic*.
Someone had this similiar problem the other day.
scariola said:
Make sure your using the UCMD3 modem for JB. Then type *#2263# into dialer and try to set to automatic*.
Someone had this similiar problem the other day.
Click to expand...
Click to collapse
Thanks, scariola.
I give it a go.
Pete
Anthony820 said:
Pretty common problem with the JB modem. You pull LTE or you pull E. For me, the best modem is UCMB4. It's an ICS modem, though, so I'm not sure how it'll work on jellybean. But you may give it a try. I pull the best speeds -- by far -- with it, and I pull consistent LTE. With the different ported modems I would have calls not go through sometimes -- weird -- and just "okay" speeds. With the ucmb4 I get solid all-around service.
Click to expand...
Click to collapse
Thanks for all the comments. Glad to hear it is common problem and not just me going nuts.
I still like my i717, but seem to spend more and more time screwing around with it to get it to work right. Good excuse to get a Note 3 I guess
Hi everyone,
I'm new to the Note, but definitely not new to Android or XDA.
I've got the phone "unlocked" via the radio trick here: http://str8pt.blogspot.com/2013/06/unlock-simfree-method-for-galaxy-note.html
I've rooted it, and have tried a few different ROMs with different radios.
The Blaze radio (and others) I mention are from here: http://forum.xda-developers.com/showthread.php?t=1679722
I am in Melbourne, FL in case location makes any difference.
Here's what I am seeing:
CyanogenMOD 10.1.3 - using Blaze ICS radio I am getting only EDGE speeds. Using "Official TMO ICS Radio" (I'm guessing it's the one from the TMO Note?) , I get NO connectivity.
Stock 4.1.2 - using Blaze ICS radio I am getting 4G, however the signal meter is totally empty as if there's just enough signal to register connectivity but not enough to register a single bar. Download speeds are abysmal in comparison to other TMO phones I've used here - I am seeing downloads at around 1.5MB - other phones are 6, 7, even 8 MB.
My question are as follows:
Using CyanogenMod, should I be using the i717 version? Or the TMO Note version? Is there anything I can do with ANY particular radio to get better than EDGE?
Using the Stock ROM (or a variant), is there are a way to get the signal cluster to function properly? Any way to get better download speeds?
I read that the TMO 4.0.4 stock ROM image can be installed via ODIN and apparently it works correctly (if I am reading correctly) - would the TMO 4.1.2 stock ROM image be installed via ODIN and work as well? (If I can even find a full download of it?)
Should I expect to have to re-flash the radio each time with each ROM? From what I've seen, if I don't, I lose any ability to get 4G until I flash it again. I'd be stuck on EDGE.
Thanks so much guys! I've searched and read till my eyes are crossing and not finding the answers I need. I hope that with the experience that can be found in this forum maybe I can get where I need to be!
Thanks again!
JWhipple said:
Hi everyone,
I'm new to the Note, but definitely not new to Android or XDA.
I've got the phone "unlocked" via the radio trick here: http://str8pt.blogspot.com/2013/06/unlock-simfree-method-for-galaxy-note.html
I've rooted it, and have tried a few different ROMs with different radios.
The Blaze radio (and others) I mention are from here: http://forum.xda-developers.com/showthread.php?t=1679722
I am in Melbourne, FL in case location makes any difference.
Here's what I am seeing:
CyanogenMOD 10.1.3 - using Blaze ICS radio I am getting only EDGE speeds. Using "Official TMO ICS Radio" (I'm guessing it's the one from the TMO Note?) , I get NO connectivity.
Stock 4.1.2 - using Blaze ICS radio I am getting 4G, however the signal meter is totally empty as if there's just enough signal to register connectivity but not enough to register a single bar. Download speeds are abysmal in comparison to other TMO phones I've used here - I am seeing downloads at around 1.5MB - other phones are 6, 7, even 8 MB.
My question are as follows:
Using CyanogenMod, should I be using the i717 version? Or the TMO Note version? Is there anything I can do with ANY particular radio to get better than EDGE?
Using the Stock ROM (or a variant), is there are a way to get the signal cluster to function properly? Any way to get better download speeds?
I read that the TMO 4.0.4 stock ROM image can be installed via ODIN and apparently it works correctly (if I am reading correctly) - would the TMO 4.1.2 stock ROM image be installed via ODIN and work as well? (If I can even find a full download of it?)
Should I expect to have to re-flash the radio each time with each ROM? From what I've seen, if I don't, I lose any ability to get 4G until I flash it again. I'd be stuck on EDGE.
Thanks so much guys! I've searched and read till my eyes are crossing and not finding the answers I need. I hope that with the experience that can be found in this forum maybe I can get where I need to be!
Thanks again!
Click to expand...
Click to collapse
I recently obtained an I717 too, unlocked it, and got it functioning with my tmobile prepaid plan. I'm still on gingerbread rom and using KID radio with decent success. just 4G , using WCDMA band 1700 (*#2263#). I get consistent decent speeds but not LTE.
The hands down best modem to use is UCMB4 - Google it. But it can cause problems with some jelly bean ROMs.
If you want jb more than anything, play with modems. If you want speed AND stability, go jellybean sandwich or black star X with the aforementioned modem.
If you want WiFi calling download skeleton key.
Ucmb4 with any of those three and the proper APN will get you LTE as fast as it's offered in your area
Anthony820 said:
The hands down best modem to use is UCMB4 - Google it. But it can cause problems with some jelly bean ROMs.
If you want jb more than anything, play with modems. If you want speed AND stability, go jellybean sandwich or black star X with the aforementioned modem.
If you want WiFi calling download skeleton key.
Ucmb4 with any of those three and the proper APN will get you LTE as fast as it's offered in your area
Click to expand...
Click to collapse
Hi Anthony820,
I'm currently running your Skeleton Key ROM - not bad at all! But definitely want to try to get CyanogenMod or PACman JB running.
I'll give the UCMB4 radio a shot this evening !
When I had service with TMO (via Straight Talk) I had the best luck with UVLG3.
jman315 said:
When I had service with TMO (via Straight Talk) I had the best luck with UVLG3.
Click to expand...
Click to collapse
Using which ROM?
I've got CM 10.1.3 for i717 installed right now, going through and testing each and will post results.
JWhipple said:
Using which ROM?
Click to expand...
Click to collapse
At the time I was running CM 10.1 nightlies.
Uvlg3, if I recall, will get you good down speed, but mediocre up. Otherwise, it's a solid choice and may be more cooperative with jb builds.
Sent from my SM-N900T using xda app-developers app
Anthony820 said:
Uvlg3, if I recall, will get you good down speed, but mediocre up. Otherwise, it's a solid choice and may be more cooperative with jb builds.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Looks like you're right - here's just 4 radios that I just tested:
UCMB4 - EDGE only
UVLG3 - 3G/DC(WTF??)/H+ 6.01Mbps up/1.07 Mbps down
UVLE1 - Phone freezes, locks on black screen, had to pull battery
ICSBLAZE - 3G/DC/H+ Network communication issues message when running speedtest.
By the way, what the heck is "DC" on the network indicator where 3G or H/H+ normally is? I've never seen that before!
JWhipple said:
Looks like you're right - here's just 4 radios that I just tested:
UCMB4 - EDGE only
UVLG3 - 3G/DC(WTF??)/H+ 6.01Mbps up/1.07 Mbps down
UVLE1 - Phone freezes, locks on black screen, had to pull battery
ICSBLAZE - 3G/DC/H+ Network communication issues message when running speedtest.
By the way, what the heck is "DC" on the network indicator where 3G or H/H+ normally is? I've never seen that before!
Click to expand...
Click to collapse
I believe It stands for dual channel.
By the way, just checked and CM's WiFi tethering is working as well - nice!
Not sure what I did differently this time but this evening the signal indicator is showing real signal strength, equivalent to what I was seeing on another phone on CM.
JWhipple said:
By the way, just checked and CM's WiFi tethering is working as well - nice!
Not sure what I did differently this time but this evening the signal indicator is showing real signal strength, equivalent to what I was seeing on another phone on CM.
Click to expand...
Click to collapse
Good to hear. I believe not seeing any signal strength is a known issue specifically with the Blaze modem.
Make sure you're changing your APN from epc.* to fast.t-mobile.com
Sent from my SM-N900T using xda app-developers app
Anthony820 said:
Make sure you're changing your APN from epc.* to fast.t-mobile.com
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I'm guessing that would get me LTE if it's available in my area?
I just switched over to it and only got EDGE...
JWhipple said:
I'm guessing that would get me LTE if it's available in my area?
I just switched over to it and only got EDGE...
Click to expand...
Click to collapse
If you're on a modem that'll work with LTE, yep. Otherwise HSPA or Edge.
Make sure, I forget and my Note no longer has service, that the top option is set under Network Type or whatever it is. Network Mode? I don't know, you'll figure it out. The thing that lets you pick between GSM, WCDMA etc..etc..
Anthony820 said:
If you're on a modem that'll work with LTE, yep. Otherwise HSPA or Edge.
Make sure, I forget and my Note no longer has service, that the top option is set under Network Type or whatever it is. Network Mode? I don't know, you'll figure it out. The thing that lets you pick between GSM, WCDMA etc..etc..
Click to expand...
Click to collapse
Ok, I got it figured out. I am on the FAST APN and set to WCDMA/LTE . I'm on 3G/H+ here in the house now - will see how it goes when I head out tomorrow.
Either way, I think it's time to make a backup - it's running marvelously and doing everything I would expect it to!
NOTE: Newest PAC ROM (4.3) running smoothly with UVLG3 modem on T-Mobile without issue
[EDIT]
Scratch that - it worked great until I did the first reboot - then it wouldn't boot up again, even with a battery pull.
JWhipple said:
Ok, I got it figured out. I am on the FAST APN and set to WCDMA/LTE . I'm on 3G/H+ here in the house now - will see how it goes when I head out tomorrow.
Either way, I think it's time to make a backup - it's running marvelously and doing everything I would expect it to!
Click to expand...
Click to collapse
I went ahead and flashed UCMB4 and was showing 4g lte after reboot. my phone info setting says WCDMA preferred (it shows no LTE option at all ) and the *#2263# menu setting says "automatic". on the fast.t-mobile.com apn
I use UCMD3 and get LTE almost everywhere. Hellybean is a pretty good ROM, try it out!
I have a HTC REZOUND Verizon running liquid ROM my 3g never works and I never have LTE. Well the phone shows 3g but nothing works when its on 3g. Can some one help me please and thank you:good:
What do you have set up under Settings, More... Mobile Networks, Preferred Network Type? Should be LTE.
mjones73 said:
What do you have set up under Settings, More... Mobile Networks, Preferred Network Type? Should be LTE.
Click to expand...
Click to collapse
I set it to LTE/CDMA/EVDO. but still the same no working 3g or late. And idk if this has anything to do with it but when I got the phone they told me that the radio was flashed to work better on at&t so idk if that affects my Verizon network
NICER401 said:
I set it to LTE/CDMA/EVDO. but still the same no working 3g or late. And idk if this has anything to do with it but when I got the phone they told me that the radio was flashed to work better on at&t so idk if that affects my Verizon network
Click to expand...
Click to collapse
Not sure what they meant by that, there's no AT&T specific radio. You may want to wipe the phone clean and start over on it.
http://forum.xda-developers.com/showthread.php?t=2509770
Meaning the nv files were overwritten so att sims would pick up hspda or higher... hangouts me and i can get you on verizons radios properly [email protected]
I had an issue a year or two back and it turned out to be the battery door that went south. replaced the door and was back in business. may or may not be your problem but just an idea.