Hi,
I tried installed ROM of CM9 from FXP116 version and I found the error message below when i installed the ROM from recovery mode. Any idea of this?
Installing update...
assert failed: getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
E:Error in /sdcard/FXP116-update-cm-9.0.0-RC0-nozomi-UNOFFICIAL-signed.zip
(Status 7)
Installtion aborted
No files found.
Could anybody please suggest how to fix this? Now I couldn't boot in normal mode either.
Thanks.
Isnt it the case that there are no working roms atm?
You've broken your own system now so you need to reflash .73.
How to re-flash from the recovery mode now?
I have flashed with the recovery image and now struck in the recovery mode. Thanks.
ED1: I managed to resolve this already. Thanks
Hello guys,
i have a problem while updating my phone.
Phone: Gooapple V5-3G
I get this brand new phone and im a noob in this case.
I download the new rom and follow the instruction on rom.gooapple.com.
If i started updating from sd card. first it starts and then i get a error code status 7.
-- Install /sdcard ...
Installing update...
assert failed: getprop("ro.product.device") == "N94" || getprop("ro.build.product") == ''N94''
E: Error in /tmp/sideload/package.zip (Status 7)
Update.zip is not correct
Installation abortet.
I try many different roms it is everytime the same thing...
My device is allready rooted and everything should be fine. What is the problem?
Sorry for my english, im from germany.
Thank you.
Hey, guys. I'm one of the unfortunate lads that isn't able to unlock his bootloader. So I thought I'd give MIUI a try (2.8.10) since it claims to be able to flash on to lockedBL through CWM. So the problem is this, once the phone is rooted and in android 4.0.4 (for the right kernel) I go to CWM and follow the steps which should allow me to flash the rom (wiping cache, data, system etc.). However, the problem is this error right here,
"asset failed: getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i"
E: error in /sdcard/miuiandroid_LT26i-2.8.10.zip (status 7)
Installation aborted
No matter what I try, nothing gets rid of this error code. No one else is having this issue are they? I'm sick fed up of stock 4.0 on Sony, not optimised enough. Need a custom rom, especially since my bootloader is locked.
Thanks in advance for the help.
Can you install another cwm or it's the only recovery available for locked BL???
The problem is that the update script is made for another cwm.
Sent from my LT26i using Tapatalk 2
keewanchoapsss said:
Hey, guys. I'm one of the unfortunate lads that isn't able to unlock his bootloader. So I thought I'd give MIUI a try (2.8.10) since it claims to be able to flash on to lockedBL through CWM. So the problem is this, once the phone is rooted and in android 4.0.4 (for the right kernel) I go to CWM and follow the steps which should allow me to flash the rom (wiping cache, data, system etc.). However, the problem is this error right here,
"asset failed: getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i"
E: error in /sdcard/miuiandroid_LT26i-2.8.10.zip (status 7)
Installation aborted
No matter what I try, nothing gets rid of this error code. No one else is having this issue are they? I'm sick fed up of stock 4.0 on Sony, not optimised enough. Need a custom rom, especially since my bootloader is locked.
Thanks in advance for the help.
Click to expand...
Click to collapse
you can try 2 things:
1. in the CWM, choose mount -> format /system (careful) and then try flashing the rom or
2. open the zip file using 7zip, navigate to \META-INF\com\google\android\ folder edit "updater-script". remove assert(getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i" . You must use notepad++ for this
Sent from a neXus
I already tried your first suggestion and it failed on me horribly ha! So I guess I must have to try stage two thanks <3
edit: Right so I did your second suggestion and i had a different outcome, just simply says 'Installation aborted'. Any more ideas. I cant find another 'Locked Booloader' recovery.
Sent from my LT26i using xda premium
keewanchoapsss said:
I already tried your first suggestion and it failed on me horribly ha! So I guess I must have to try stage two thanks <3
edit: Right so I did your second suggestion and i had a different outcome, just simply says 'Installation aborted'. Any more ideas. I cant find another 'Locked Booloader' recovery.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I replaced update-script from older version of miui and it work for me ...
I had the same problem today after unsuccessfully trying to install CM 9.0.
Luckily I had the SSpeed Kernel and KA ROM on the internal storage, so after doing a wipe and cleanup dalvik, I was able to flash the Kernel and then the ROM
keewanchoapsss said:
Hey, guys. I'm one of the unfortunate lads that isn't able to unlock his bootloader. So I thought I'd give MIUI a try (2.8.10) since it claims to be able to flash on to lockedBL through CWM. So the problem is this, once the phone is rooted and in android 4.0.4 (for the right kernel) I go to CWM and follow the steps which should allow me to flash the rom (wiping cache, data, system etc.). However, the problem is this error right here,
"asset failed: getprop("ro.product.device") == "LT26i" | | getprop("ro.build.product") == "LT26i"
E: error in /sdcard/miuiandroid_LT26i-2.8.10.zip (status 7)
Installation aborted
No matter what I try, nothing gets rid of this error code. No one else is having this issue are they? I'm sick fed up of stock 4.0 on Sony, not optimised enough. Need a custom rom, especially since my bootloader is locked.
Thanks in advance for the help.
Click to expand...
Click to collapse
this happen to me too.i m not able to flash any version of CM9 rom now.i m running on unlock bootloader.anny idea?
o
Older CWM compatible?
gm007 said:
Can you install another cwm or it's the only recovery available for locked BL???
The problem is that the update script is made for another cwm.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Which CWM version should work? How can you tell? I have 5.0.2.0, which is the latest for N1, but I can't flash MIUI.us_passion_v4.1_2.11.23_Eng_Deo_ZipA_Signed_0xD34D
I get a Status 7 abort error
Status 7 problem not solved!
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
the kernel version that i've is 3.0.8-FXP-g9426a6e
Pkeshin said:
I have a Sony Xperia LT22i (nypon). I had the stock version of jb by sony i.e., 6.2.A.1.100.
I have been trying to flash FXP233-cm-10 for xpeira p on my phone but the process has not been successfull.
the cwm recovery kernel alongwith the ROM is 6.0.2.8
I also have a cwm recovery kernel version 6.0.3.2
I successfully pushed the files into the sdcard but the installation from zip failed due to status 7.
The error shown is:
assert failed: getprop("ro.product.device") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.build.product") == "LT22i" || getprop("ro.product.device") == "LT22a" || getprop("ro.build.product") == "LT22a" || getprop("ro.product.device") == "nypon" || getprop("ro.build.product") == "nypon"
E:Error in /sdcard/update.zip
(Status 7)
Installtion aborted
I tried editing the updater-script & then running the installation but then the log shows:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
My current status of phone is:
Recovery= CWM v6.0.2.8
Wiped dalvik cache
Wiped system("I did that accidentally")
Factory reset also
I also have the zip file FXP228-cm-10 for xperia p
both of them use the same cwm version
when i tried installing it, it showed the same error as above
Please help
the kernel version that i've is 3.0.8-FXP-g9426a6e
Click to expand...
Click to collapse
I'm curious, put a copy of the updater script on here please. . .
Nathan.7118391 said:
I'm curious, put a copy of the updater script on here please. . .
Click to expand...
Click to collapse
Actually i successfully completed the process bydoing the following:
i flashed the jb stock rom for xperia p again...
unlocked the bootloader again,
then copied the rom.zip & gapps.zip to sdcard,
flashed cwm v6.0.2.8 (provided with the rom),
flashed the zip files
& voila! everything worked fine....
though i still don't understand why it didn't install first 'coz, i followed the procedure to edit the 'updater-script' to the word....but nothing happened
guess i managed to get lucky a bit!
by now i've successfully flashed & tried the following roms:
FXP233 (cm10) ["THE BEST ON THE LIST"]
Pac man rom(based on cm10.1, pa, aokp) ["Buggy, can't install purchased apps, problems in installing apps on sdcard, bluetooth doesn't work, but overall customization, performance is pretty good, though i would've been glad if the devs had included some sort of inbuilt battery saver mode, like the battery stamina in stock jb roms for 2012(some models) & 2013 xperia series)
Revolution v33.4 (lagged a lot on my phone, hope someone else had a better time using this one)
Good for you! You have to be careful when dealing with scripts, its very easy to insert a space or forget to close quotes and it doesn't work. Format could have been amend instead of edify but that's provably not likely.
Sent from my LG-P769 using xda-developer's app. Hit thanks' cause it makes me feel good.
status 7 error
I m updating from MIUI version 4.2.23 to version 4.3.4 ota updat.
The error Msg says
Verifying current system.
Assert failed. apply patch check and bla bla bla... n then
error in sd card location and then
Status 7
Kindly help...
Hi,
I am using hTC Amaze 4g status: S-NO
I unlock my bootloader from your toolkit and I install recovery then I took backup and then I wipe all the thing and did a factory reset. And trying to change my rom but unfortunately I am getting this error:
Status 7 installation aborted
1st Rom Error:
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /internal_sdcard/OTA_RUBY_ICS_35_S_Videotron_CA_2.14.1530.6-1.46.1530.1_R2_release_2630972v8tnj4gaksgm0w5.zip
(Status 7)
Installation aborted
2nd Rom Error:
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel"
E:Error in /internal_sdcard/pa_marvel-2.54-beta1-08NOV2012-164651.zip
(Status 7)
Installation aborted
3rd Rom Error:
assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
E:Error in /internal_sdcard/RasSaber_grouper_ota_2013-05-27.zip
(Status 7)
Installation aborted
I am not able to install any rom. I installed this ViperA.1.6.9_2.zip but this rom is not working properly camera & sound both are not working in this rom.
after this I tried to change my recovery first I installed TWRP 2.3.3.0 then I installed 4EXT but getting same issue in both.
I took backup of my hTC Amaze 4g orignal rom but unfortunately I lost my backup in wiping and factory reseting now I don't have my orignal rom which I backup in my phone.
I really need help me. Its urgent my phone is off.
kumaillakhani said:
Hi,
I am using hTC Amaze 4g status: S-NO
I unlock my bootloader from your toolkit and I install recovery then I took backup and then I wipe all the thing and did a factory reset. And trying to change my rom but unfortunately I am getting this error:
Status 7 installation aborted
1st Rom Error:
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /internal_sdcard/OTA_RUBY_ICS_35_S_Videotron_CA_2.14.1530.6-1.46.1530.1_R2_release_2630972v8tnj4gaksgm0w5.zip
(Status 7)
Installation aborted
2nd Rom Error:
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel"
E:Error in /internal_sdcard/pa_marvel-2.54-beta1-08NOV2012-164651.zip
(Status 7)
Installation aborted
3rd Rom Error:
assert failed: getprop("ro.product.device") == "grouper" || getprop("ro.build.product") == "grouper"
E:Error in /internal_sdcard/RasSaber_grouper_ota_2013-05-27.zip
(Status 7)
Installation aborted
I am not able to install any rom. I installed this ViperA.1.6.9_2.zip but this rom is not working properly camera & sound both are not working in this rom.
after this I tried to change my recovery first I installed TWRP 2.3.3.0 then I installed 4EXT but getting same issue in both.
I took backup of my hTC Amaze 4g orignal rom but unfortunately I lost my backup in wiping and factory reseting now I don't have my orignal rom which I backup in my phone.
I really need help me. Its urgent my phone is off.
Click to expand...
Click to collapse
Do you people even read before doing this stuff. In every guide it tells you that you need to run an ics ruu before running roms and to do that you need to s-off. If your phone is the international version, no you cant change your rom unless you are s off.
Sent from my Amaze 4G using xda app-developers app
Well one of the main problems Is that the "roms" you are trying to flash in recovery, are all ruu's! Lol^^^
Read my guides, they are stickied in the general section... learn a little more nout what's going on then try again
Sent from my SCH-I535 using xda app-developers app
It constantly throws an error of
Installing: /sdcard/o/download/pa_i605-3.99-RC2-30131021.zip
Finding update package
Opening update package
Installing update
assertfailed: getprop("ro.product.device.) == "t0ltevzw | |
getprop("ro.build.product") == "t0ltevzw
E: Error in /sdcard/o/download/pa_i605-3.99-RC2-30131021.zip
(Status 7)
Installation Aborted.
I feel I should note, I havn't been able to update PA in almost 2 months because it constantly throws an error.
Wipe. Do a fresh install.
Sent from my SCH-I605 using Tapatalk 2
I did a number of times, even wiped the system one. Always get that error.
have you tried RE downloading? how about saving to the External SD card first? (or internal?) what about updating to newest recovery?
heres a thread dedicated to fix STATUS 7 error. http://forum.xda-developers.com/showthread.php?t=2302599