Related
Hi everybody, I tried flashing cm7 for the first time on my SGS2 last night- Everything went smooth and it booted right up but for the life of me data is just simply not working correctly. I tried the edited APN's given in the second post but to no avail. Also I have tried re-flashing several times and still have the same issue. The H+ icon appears and then quickly flips between that and 3G and whenever I attempt to use the connection it fails or drops (Simply opening the browser for instance) I just re-flashed UnNamed and everything appears to be working fine again so I have ruled out the service provider in my area (at&t of course) Anyone have any ideas?
Out of curiosity has anyone else had this problem? I haven't seen any such thing in the CM7 thread under development. I would find it quite odd if i were the only one having such a problem.
If no one has a clue this topic should just be closed and I suppose I will wait for the next release of CM for the SGS2.
I'm having a problem that has me stumped.
YouTube
Earlier in the week, I noticed that I was unable to stream YouTube videos over mobile data. I could launch YouTube and it would bring up the top videos. I could search and it would get me results. I could not however get anything to actually play, when I choose a video it will just sit at the loading screen, and my bars will turn grey. I will not get a mobile data connection back until I back out of Youtube. I confirmed this issue with several different videos while in different parts of the state, so it isn't limited to a certain video or tower.
Google Talk
If I am at the main screen that shows who is online/offline, usually this will display properly. However as soon as I pick a name and go to send a message, my bars will turn grey and I will lose my data connection. It will not come back until I back out of Talk. Sometimes after this happens I can reopen talk and it will sit at the main screen for a while, get mobile data back, and display who is online and who is not. Most of the time, Talk will not work again until I force close it.
Edit: Talk will not disconnect until I actually send a message. The message makes it through most of the time, but then I lose mobile data. This results in Talk saying "Lost connection to Server. Messages will be sent when online."
I am on CM7 Nightly 20 with the stock CM7 kernel since the day Nightly 20 was released. Just to be safe, I did a full wipe in Fastboot erasing the following partitions before re-flashing: userdata, cache, webtop, system, boot.
I am unsure when this problem started. I know that YouTube worked last weeks, but when I think back, I can't remember the last time Google Talk worked while I was on mobile data. Note though, that while on Wifi everything works just fine.
I'm at wit's end here. I'm going to wipe the phone again and install stable Ba2tF and just Google Apps, and see what happens (after I flashed Nightly 20 earlier today I had the Market start spam reinstalling my apps before testing Google Talk - though I did get to test it and have it lose data after just a few apps were installed).
I'm on 30P for the radio, AT&T, Western Massachusetts, any help would be greatly appreciated!!!
I was going to post the same exact problem. The problem only appears over cellular. Over WiFi, everything works fine. Also, I just reflashed stock and it works. So it would seem to be a problem with CM7 and/or AT&T.
I'm going to get a good logcat of what's going on after I narrow it down a bit more... my current log is 1MB, which as about 2 minutes of info. I'm going to try to narrow it down to just the few seconds from when I hit "send" to when I get disconnected.
Hopefully at that point someone smarter than I can figure out what's going on.
DK
DeathKoil said:
I'm going to get a good logcat of what's going on after I narrow it down a bit more... my current log is 1MB, which as about 2 minutes of info. I'm going to try to narrow it down to just the few seconds from when I hit "send" to when I get disconnected.
Hopefully at that point someone smarter than I can figure out what's going on.
DK
Click to expand...
Click to collapse
Just thought I'd chime in and give some feedback. Tested this out on Weekly #2 both with wi-fi and regular data and everything was working as it should. I've been through a few different versions of CM7 and have not run into this.
Have you been using the same gtalk .zip each time? Maybe try re-downloading it along with your fresh install? Also, have you re-flashed your radio?
And here is a logcat capture. I force closed Talk, started the capture, launched talk, connected, pressed on my roommate's name, and lost my connection. The part that says "<SNIP>" is where my email address was.
I'm going to upload it here, then start to go over it myself.
DK
ghost_og said:
Have you been using the same gtalk .zip each time? Maybe try re-downloading it along with your fresh install? Also, have you re-flashed your radio?
Click to expand...
Click to collapse
Yeah, the GAPPS package ROM Manager lists as newest is still 20110828, which is also listed as newest on the Cyanogen Wiki. I never re-downloaded it, I've always used the same .zip everytime I've needed it... which is since Pre-Beta1.
I didn't flash my radio up to 36P when it came out since some people reported issues with it, and 30P had been working fine for me since June/July.
I am going to try to re-flash Google Apps now, this time without using the new version of talk that supports the front facing camera... since I never used the functionality anyway. I will report back in a few minutes.
DK
I tried reflashing both AT&T radios and both versions of Talk (w/ and w/o video chat).
For me, I get disconnected as soon as I open Talk. Happens every time. I froze Talk and I was disconnected when I got a Gmail notification. Maybe it was a coincidence but either way I was disconnected so the problem isn't limited to Talk. Maybe it's a problem with the Google Services Framework.
Here is what I think is a better logcat of what happens. This time, I setup CM7 to have long press back kill the currently active process, so that I could kill Talk right away.
I started the logcat from killing Talk and hitting the home button while it was restarted. I sent one message that said "Son" to my roommate, and lost my data connection. I then waited 20-30 seconds, killed Talk, it restarted, I got data back, I sent another message to my roommate that said "disconnect", and I lost my data again.
NOTE: This is with the Talk from the newest GAPPS (fresh download with ROM Manager), but not the one with the camera support (camera crap was cluttering the logcat anyway).
Anyone who is smarter than I able to see what's going on here?
DK
Same problem with CM7 Beta so I'm guessing there's some problem between CM7 and AT&T. I'm on AT&T in NYC.
I have a list of ROMs this does NOT happen on. I went back and restored to several points trying to figure out exactly where the problem started, and while I didn't find that, I do have a list that it does and does not happen to.
Talk Works on:
Prebeta2
Prebeta3
Prebeta4
Stopgap
Ba2tF
Weekly1
Nightly8 (likely it works on Nightlies 1-8, I just never made a backup after that and went right to 20 so I dont know exactly where the issue started with nightlies)
Talk does NOT work in:
Weekly3
Nightly20
So at some point between Nightly9 and Nightly20 (which includes the commits for Weekly3), something happened with Talk that is causing it to drop your data connection when you send message or refresh the friend list.
If any Dev happen to stumble upon this thread, I did take a logcat dump and linked it above as a txt file called "betterlog.txt" which clearly shows two disconnects while using Talk without having a lot of other "noise" in the logs from other things happening on the phone.
DK
Same problem, only I have this in Ba2tF. Odd thing is, I was running Ba2tf for some time, then all of a sudden this issue just appeared. I couldn't get it to clear, even after wiping data, caches, re-flashing etc...
Looks like this is nothing new. Check out CyanogenMod issue 3557.
---------- Post added at 02:52 AM ---------- Previous post was at 02:38 AM ----------
Same problem in Ba2tF. I was running Ba2tF for several weeks, then this problem just popped up. Couldn't get it to clear.
Looks like an old CyanogenMod issue. Issue #3557.
I don't know if it's AT&T that changed or CM7 but the problem's gone since I started using weekly #4.
I have read thru a few threads, but they all vary so I am not sure if this is the same issue so i apologize in advance if there is a thread with an answer somewhere...I certainly hope it is not a hardware issue!!...ugh..
I recently flashed Nottach's ROM to my Atrix 4G (excellent ROM!) and was in the process of loading apps and "fine tuning" it to my style and preference when I noticed that my WiFi, Bluetooh and Data are no longer working. I didnt install anything other than a couple of apps that I have been using (GoLauncher, ADW Locker, etc.) so I am not sure why everything stopped working.
I can still make and receive calls and text messages, but I am unable to connect to WiFi ( it sees WiFi signals but it doesnt get past "Obatining IP Address"). Bluetooh enables and disables right away. And I dont see any activity from the Data icon.
I have tried reflashing the ROM, Factory Reset, Wiping Partition/Dalvik, Resetting Permissions, etc. but none of these seem to have an effect on the issue.
I have seen other posts in various forums where some one mentions similar issues and they talk about flashing the antenna via RSD to get it to work, but links to the antenna ROM all seem to be broken.
Any help in getting this resolved would be GREATLY appreciated!
FYI - My phone is Unlocked and I believe it is still Rooted.
Thanks!
Well.. after playing around with reinstalling the ROM I set the Kernal back to Stock AT&T and everything appears to be working again.
So I think the fact that I was using the Faux 1.3Ghz kernal may have caused the issue, which is odd since everything was working fine for about a day before the problem started happening.
Oh well.. i will play around with different kernals to see if there may be a compatability issue some where.
Hopefully this info helps others.
The short of it is, my Wifi crapped out for reasons beyond my experiences thus far.
The long of it. I flashed epinter's 07/25/2012 Nightly and everything seemed to be working nicely, Wifi especially. Then today, out running errands and dropped my Atrix in my Car Dock and attempted to turn on Bluetooth for the first time since flashing, and the device froze then restarted. Once back up, I tried turning Wifi back on, and the device froze again and restarted. Thinking maybe the radio driver went south, I grabbed epinter's 07/27/2012 build (epinter-cm10-20120727_1846-UNOFFICIAL-olympus.zip), and still no luck. Back into Recovery, Wiping everything and also factory resetting then flashing twice over again, boot up, still no wifi, and if it manages to seemingly fire up, the device hangs and restarts.
Within the last 2 hours (Been at this for about 12 hours now.) I grabbed Jokersax's build (Beta 0.1.0), wiped/reset/flash twice as I have before. Now as I take a breath I noticed that the Wifi Icon came up in the Notification bar, but when I go into Settings and Scan, I see none of the Networks around me. I looked under Advanced and noticed that my MAC Address is 'Unavailable' nor am I showing an IP address, even though Wifi is saying 'On'. Verified on my Router, my Phone is not connected to it.
Odd Side note, installed aLogcat just to see if I could catch any errors, and it is not giving me anything, that is, I am not seeing any logs through the app. Most likely an unrelated issue, but still a tad annoying.
Everything else seems in order, including Mobile Data (Able to access Web Pages, Market/Play Store, receive email, etc.). Just Wifi pretty much 'Lights are on, but no one is Home.'. Any suggestions on next steps?
We discussed this issue over in some other threads and conclusion is that it's a hardware malfunction Ur broadcom chip is burned,many people (including me) had that problem.
Sent from my MB860 using xda app-developers app
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
try making a clean install and you'll se that you won't have that problem!
Stark5 said:
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
Click to expand...
Click to collapse
I can't search the threads right now as i am typing from my phone-search is limited to 20-30 posts... But keywords for ur search should be : "atrix wifi error" or "wifi and bluetooth error on atrix" Several forums have this kinda threads,not just xda unfortunately ... seems like it's very often malfunction on this lovely phone. I couldn't repair my previous atrix so i bought another one.
Sent from my MB860 using xda app-developers app
imarmand said:
try making a clean install and you'll se that you won't have that problem!
Click to expand...
Click to collapse
We're talking fastboot wipe kind of clean install? Going to give that a go as a last attempt, will post results here.
Glimmer of hope tonight, was discussing the problem with a friend, went to turn on WiFi and it actually scanned and connected for about 2 minutes before crapping out. This tells me there maybe life to the chip still. Now to get fastboot to connect and try a wipe and see what happens.
Sent from Xoom running cm10
Any news on this front? I am one of the afflicted as well.
I'm having a similar issue. though my BT works just fine, no delays, no errors, no intermittance.
Wifi, I can scan for networks just fine. i click on mine to connect. it shows connecting, noting that when it says connecting the signal shows 1 bar as compared to the full set of wifi bars when scanning, i am also right next to the AP. is tries connceting for about 20 seconds or so. then goes back to saying "saved" under the SSID, other networks showing "disabled" when this happens. i originally noticed this after flashing epinters cm10. i tried flashing 37p, 36p and 30p radios with no difference.
EDIT: also want to note that i HAVE disabled the "avoid poor connections" option. and have tried setting static IP.
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
johnmartin1981 said:
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
Click to expand...
Click to collapse
Mine works occasionally so I don't think the radio is dead. The rom just acts like it's not there most of the time and doesn't give a mac address. Sometimes it works though after a reboot. Would flashing a different radio help? My baseband version says N_01.77.37P
I had an IP and a MAC, but no wifi internet.
Using mobile data, I downloaded Set DNS and then enabled wifi, works fine.
Now it's working but mobile data is going very very slow, it took 5min to download Set DNS.
I have a skyrocket but the "no wifi" issue is probably the same - your not getting DNS
I'm going back to CM9 for now.
+1 wifi matter under CM10
Try rebooting the router.
Experienced same issue (unable to connect, showing full bars, dropping to 1 bar when connecting and never being able to complete a connection) rebooting my router has fixed the issue. I'm not technical but it might have to do with the DNS release for addresses .. in any case unplugging my router for a bit and restarting it fixed the issue for me.
I know this has been discussed before, but after hours of searching last night on google, i have come to a standstill.
Has the wifi constant disconnect / reconnect been addressed.
Cheers.
re
looks like i will have to post my own reply.
I have reset the phone, and now it holds my wifi connections and does not disconnect.
Id suggest that if you have the same wifi disconnect and reconnect issues.. try a factory reset.
It connects fine, it just doesn't receive any data. I have tried flashing the stock modules. That didn't seem to help, I"ll keep trying hopefully when an decent AOSP rom appears i'll flash that and it'll correct the problem
Thanks
ManOfMyth said:
It connects fine, it just doesn't receive any data. I have tried flashing the stock modules. That didn't seem to help, I"ll keep trying hopefully when an decent AOSP rom appears i'll flash that and it'll correct the problem
Thanks
Click to expand...
Click to collapse
Is this with all wifi or just at your house, may be your equipment, does another phone have trouble connecting?
re
i just noticed last night something interesting, but not sure if it means anything to anybody else.
I have installed the chrome browser and have been using that for the last few days.
I connected to my home wifi and cruised around the web for an hour with no issues.
I decided to try the stock android browser and it would not load, like the wifi signal was gone.
i went back to my chrome browser and there was no issue loading new web pages.
I went back to my stock browser and reset it back to defaults and bamm it was working like the chrome browser with no hiccups.
Not saying this is a fix.. but it worked for me!
re
RLGL said:
Is this with all wifi or just at your house, may be your equipment, does another phone have trouble connecting?
Click to expand...
Click to collapse
i was having trouble at work and at home.
Tried every wifi/wpa setting/channel/encryption/speed etc.
i have 5 other wifi devices that have no issues.
But after resetting my phone and then running chrome / clearing , resetting my stock browser .. all is good in data land.
edit.. just tested out my work wifi with the stock browser for about 10 min.. not one issue.
I have had success forgetting the Wi-Fi network that is causing issue and then reconnecting.
Sent from my HTC6435LVW using xda app-developers app
^^ i too face the same problem