TMOUS Firmware Packages
These are the currently publicly available firmware images for the T-Mobile HTC One (M7) from both officially released RUUs & OTAs. I have made them available here to help make the return to stock (for whatever reason) just a little easier. All of these packages can be obtained through other means such as the official OTA and official released RUUs. These packages are intended for s-off users & users of custom roms that cannot currently except over the air updates.
DISCLAIMER
Flashing hardware dependent and core software like firmware packages is inherently risky. You should know the risks before modifying these software imgs on your device. You will have no recourse should something go wrong during the flashing process. An error during the upgrade process may make the device non-functional or "bricked." I am not responsible for anything that happens to your device. USE AT YOU OWN RISK
Click to expand...
Click to collapse
Click to expand...
Click to collapse
*Importan Notice*
These firmware packages contain boot.img and are intended to be flashed while running a stock 4.19.531.xx ROM or before flashing a 4.19.531.xx ROM. Any other ROM may fail to boot after flashing. These packages also include the stock recovery.img, which has a two step process to enter. First, boot into bootloader and select recovery. Then, at the black screen with the red triangle, press power+UP to enter the essentially useless stock recovery. If you want use a custom recovery, like TWRP, you will need to fastboot flash it again after flashing firmware.
These firmware.zips are unsigned, so S-Off is required to flash these packages.
IF YOU ARE S-ON LEAVE NOW! This thread is intended for S-Off users that need to return to stock. It is not a general update/upgrade thread. Do not attempt to flash while S-On! Thanks for Understanding.
Click to expand...
Click to collapse
Official Firmware Package
OTA 4.19.531.10 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Download:
tmo_fw_4.19.531.10
Click to expand...
Click to collapse
Whats included:
boot.img
Hboot
radio.img (4A.24.3263.09_10.38r.1157.04L)
rcdata.img
recovery.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
tp_HMX852XD.img
tz.img
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Custom Firmware Package
CUSTOM 4.19.531.10 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Download:
Custom_tmo_fw_4.19.531.10
Click to expand...
Click to collapse
Whats included:
Hboot
radio.img (4A.24.3263.09_10.38r.1157.04L)
ramdisk.img
rcdata.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
tp_HMX852XD.img
tz.img
Click to expand...
Click to collapse
Click to expand...
Click to collapse
How to flash:
Rename downloaded zip to firmware.zip
Copy firmware.zip to your fastboot.exe location (example c:/AndroidSDK/platform-tools/)
Open cmd prompt from within your fastboot directory or cd to it
Boot device into fastboot mode (power+volume DWN, select fastboot)
Connect device to PC
Enter the following cmd and wait for device to reboot into RUU mode:
Code:
fastboot oem rebootRUU
Enter the following cmd and wait for process to complete (note the on screen progress bar will not fill completely, refer to cmd prompt's output for flash details):
Code:
fastboot flash zip firmware.zip
If process fails after updating Hboot with the following error:
FAIL (remote 90 hboot pre-update! please flush image again immediately)
Click to expand...
Click to collapse
simply re enter the above flash cmd to finish the update process
If output indicates a successful flash, enter cmd:
Code:
fastboot reboot
Outdated Firmware Packages
OTA 3.24.531.3 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Download:
tmo_fw_3.24.531.3
Whats included:
adsp
boot.img
Hboot
radio.img (4A.21.3263.03_10.38m.1157.04L)
rcdata.img
recovery.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
tp_SYN3202.img
tz.img
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
EXPANDED 3.24.531.3 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Download:
Expanded_tmo_fw_3.24.531.3
Whats included:
adsp.img
boot.img
cir.img
Hboot
pg2fs_spcustom.img
radio.img (4A.21.3263.03_10.38m.1157.04L)
ramdisk.img
rcdata.img
recovery.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
tp_SYN3202.img
tz.img
Click to expand...
Click to collapse
**IMPORTANT: This is an expanded firmware packege containing all firmware imgs from the 3.24.531.3 RUU. I have left out the dzdata.imgs as they will wipe your internal storage. If you choose to flash the RUU you will not only wipe your internal storage, but will also flash the entire system.img as well, which may be more than you need.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
OFFICIAL 1.27.531.11 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Download:
tmo_fw_1.27.531.11
Whats included:
adsp.img
boot.img
Hboot
radio (4A.17.3250.20_10.40.1150.94L)
rcdata
recovery
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
tz.img
Click to expand...
Click to collapse
**This is the firmware package ripped directly from the OTA and signed by HTC.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
EXPANDED 1.27.531.11 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Download:
tmo_fw_1.27.531.11_expanded
Whats included:
adsp.img
boot.img
Hboot
pg2fs_spcustom.img
radio.img (4A.17.3250.20_10.40.1150.94L)
ramdisk.img
rcdata.img
recovery.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
splash1.nb0
tp_SYN3202.img
tz.img
Click to expand...
Click to collapse
**IMPORTANT: This is an expanded firmware packege containing all firmware imgs from the 1.27.531.11 RUU. I have left out the dzdata.imgs as they will wipe your internal storage. If you choose to flash the RUU you will not only wipe your internal storage, but will also flash the entire system.img as well, which may be more than you need.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Custom 1.27.531.8 - T-Mobile USA
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Whats included:
boot.img
Hboot
radio (4A.14.3250.15_10.34.1150.02L)
rcdata
recovery
Click to expand...
Click to collapse
Download:
tmo_fw_1.27.531.8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Expanded Custom 1.27.531.8 - T-Mobile
modelid: PN0713000
cidnum: T-MOB010
Click to expand...
Click to collapse
Whats included:
adsp.img **from AT&T (Cingular) 1.26 RUU
boot.img
Hboot
radio (4A.14.3250.15_10.34.1150.02L)
rcdata
recovery
Click to expand...
Click to collapse
Download:
tmo_fw_1.27.531.8_expanded
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Link works now thanks. So I'm assuming since the download is 38MB we need to be on .7 then flash this firmware?
Sent from my HTC One using xda premium
blackerwater said:
Link works now thanks. So I'm assuming since the download is 38MB we need to be on .7 then flash this firmware?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
This is simply firmware, it has no included system software whatsoever, which is why it's only 38MB. Typically the firmware zip will be anywhere from 50-100MB, however, unneeded firmware images are not included AND we could still use the missing adsp.img. If your S-off you can flash firmware regardless of what software you're running, but you may need to reflash your ROM's boot.img if it fails to boot after flashing firmware, as these packages contain the stock boot image.
Awesome Thank you!
Sent from my HTC One using xda premium
Hello,
Can you tell me the radio version of this. I am interested in flashing it but not if i already have it on my phone.
Thanks,
Rsotbiemrptson
Rsotbiemrptson said:
Hello,
Can you tell me the radio version of this. I am interested in flashing it but not if i already have it on my phone.
Thanks,
Rsotbiemrptson
Click to expand...
Click to collapse
These are the stock firmware imgs from the 1.27.531.8 OTA update. As such it includes radio version 4A.14.3250.15_10.34.1150.02L.
Thanks so much for posting this!
Been looking to get something like this for a while. Always felt there was something missing besides stock roms and stock nandroids to get us back if we upgraded firmware down the road and wanted something to get us back to 4.1.2 and 1.27.531.x Rom.
Can you describe what wcnss and adsp do and anyway we can go about getting them to make your package complete, minus a T-Mobile ruu?
Sent from my HTC One using Tapatalk 2
gustav30 said:
Thanks so much for posting this!
Been looking to get something like this for a while. Always felt there was something missing besides stock roms and stock nandroids to get us back if we upgraded firmware down the road and wanted something to get us back to 4.1.2 and 1.27.531.x Rom.
Can you describe what wcnss and adsp do and anyway we can go about getting them to make your package complete, minus a T-Mobile ruu?
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
wcnss = wifi/wlan firmware (no longer used)
adsp = not 100% sure, I believe it communicates Hboot and kernel allowing system to load
The reason adsp is important is that sometimes when switching to newer roms, they will not boot without the newer adsp.img and matching Hboot. In our case, at least for now, the adsp.img from the AT&T firmware package is likely fine. The only reason I have not included it in this firmware package is because I'm trying to use only stock T-Mobile resources on the off chance there is a minor change. As I said, in this case I believe its fine to use but that was my thought process.
As far as acquiring the needed imgs, the best way is, of course, ripping them from an OTA update. An RUU would work as well but would need to be decrypted first (fairly easy) and on top of that, I don't see the one being leaked for t-mobile. The next OTA should contain a full firmware package assuming it's the Android 4.2 update. The only other way is to DD the the different partitions. The problem with that is we need a complete partition table and I have not seen one.
Can I use this to get a warranty?
xedualMCx said:
Can I use this to get a warranty?
Click to expand...
Click to collapse
No, not in and of itself. To return a phone for warranty you would need to return to a completely stock state.
To do that (since we don't have RUU):
flash the stock, untouched, odexed rom found in the developer forum (not the one with CIQ removed)
flash the custom firmware zip found in this thread (only needed if you have previously changed firmware such as radio or recovery)
finally, using Revone, lock your bootloader. I don't mean relock as it will then display the "relocked" flag in Hboot. I mean use the lock option.
Optional: set S-on
Its up to you whether you then want to set S-on again or not. I personally have returned phones S-off without issue, by that's up to you.
Behold_this said:
wcnss = wifi/wlan firmware
Click to expand...
Click to collapse
Thanks again.
Would you anticipate any wifi related issues with not having wcnss.img?
Behold_this said:
No, not in and of itself. To return a phone for warranty you would need to return to a completely stock state.
To do that (since we don't have RUU):
flash the stock, untouched, odexed rom found in the developer forum (not the one with CIQ removed)
flash the custom firmware zip found in this thread (only needed if you have previously changed firmware such as radio)
finally, using Revone, lock your bootloader. I don't mean relock as it will then display the "relocked" flag in Hboot. I mean use the lock option.
Optional: set S-on
Its up to you whether you then want to set S-on again or not. I personally have returned phones S-off without issue, by that's up to you.
Click to expand...
Click to collapse
Thanks a lot!
gustav30 said:
Thanks again.
Would you anticipate any wifi related issues with not having wcnss.img?
Click to expand...
Click to collapse
Posted in stock Rom thread (thought it was in this one, but wasn't lol):
Behold_this said:
...Also, since wcnss.img hasn't been updated yet, the fact that the img is missing from the firmware.zip is not a big deal. You will still have the original img in place...
Click to expand...
Click to collapse
if I will restore this nandroid http://forum.xda-developers.com/showpost.php?p=40745177&postcount=55 and then flash your firmware?
xedualMCx said:
if I will restore this nandroid http://forum.xda-developers.com/showpost.php?p=40745177&postcount=55 and then flash your firmware?
Click to expand...
Click to collapse
I don't know anything about that poster and he doesn't say the full version number. Is it 1.27.531.7? Is it 1.27.531.8? I dunno. I don't vouch for things I can't verify myself.
Behold_this said:
I don't know anything about that poster and he doesn't say the full version number. Is it 1.27.531.7? Is it 1.27.531.8? I dunno. I don't vouch for things I can't verify myself.
Click to expand...
Click to collapse
i think it's 1.27.531.7
Thanks Behold, nice to see you over here.
Team-Noctural.com/androidtechy.com/droidnow.com
mugetsu666 said:
Thanks Behold, nice to see you over here.
Team-Noctural.com/androidtechy.com/droidnow.com
Click to expand...
Click to collapse
Thanks for the warm welcome.
Behold_this said:
Posted in stock Rom thread (thought it was in this one, but wasn't lol):
Click to expand...
Click to collapse
Hypothetical only because I like to think of scenarios this firmware would come in hand
Say I had decided to upgrade to the latest 2.24 international firmware and run some 2.24 international based Rom, lets say ARHD 12 for sake of argument, but decided for whatever reason I had to get back to T-mobile stock.
Do you seen any complications of returning to stock by restoring my 1.27.531.x nandroid and this firmware? Would the missing adsp.img and wcnss.img come into play at that point?
I'm just trying to think of worst case scenarios and to have all my ducks in a row so if something bad did happen I'm fully prepared and not someone who starts a bunch of "help me" threads. Also this is great for learning. (Thought I learned a lot with my old Sensation but the One feels like a whole new ballgame.)
Related
Hi.
I hear that S-OFF was enabled with DNA, I distribute it.
this eng hboot is HBOOT-8064 group.
http://www.androidfilehost.com/?fid=9390288116658475065
The support models are as follows.
EVM : E806400
DROID DNA (MONARUDO) : PL83200
HTC J butterfly (DELUXE_J) : PL99100
DELUXE_R : PL99200
INFOBAR A02 (IMPRESSIN_J) : PM65100
BUTTERFLY X920e (DELUXE_U) : PL99300
DELUXE_UL : PL99400
M7_UL : PN07100
M7_U : PN07110
M7_WLS : PN07200
M7_WLV : PN07300
Butterfly X920d (DELUXE_UB1) : PL99100
Click to expand...
Click to collapse
S-OFF is MANDATORY
http://twitter.com/fnoji/status/292263541875019776
-------------------------------------------------------------------------------------------------------------
ENG hboot flash guide (MONARUDO)
http://forum.xda-developers.com/showpost.php?p=38180376&postcount=6
thx Argumentation!
fnoji111 said:
Hi.
I hear that S-OFF was enabled with DNA, I distribute it.
this eng hboot is HBOOT-8064 group.
http://www.androidfilehost.com/?fid=9390288116658475065
The support models are as follows.
S-OFF is MANDATORY
http://twitter.com/fnoji/status/292263541875019776
Click to expand...
Click to collapse
Sorry if I overlooked something, but how do you flash this? I tried "fastboot flash bootloader (file name)" but it said REMOTE : NOT ALLOWED.
Argumentation said:
Sorry if I overlooked something, but how do you flash this? I tried "fastboot flash bootloader (file name)" but it said REMOTE : NOT ALLOWED.
Click to expand...
Click to collapse
it would be while in system
su
dd if=/pathtonewhboot of=/dev/block/yourhbootpartition
Be very careful with the ENG Hboot. If you're just flashing ROM's and Kernels, you don't need it. ENG Hboot's make it easier to break things...
What exactly is this?
Sent from my HTC6435LVW using Tapatalk 2
Zarboz said:
it would be while in system
su
dd if=/pathtonewhboot of=/dev/block/yourhbootpartition
Click to expand...
Click to collapse
I ended up flashing it a bit differently, I made a PL83IMG.zip and did
Code:
fastboot oem rebootRUU
then
Code:
fastboot flash zip PL83IMG.zip
and it worked beautifully :good::laugh:
Lykarsis said:
What exactly is this?
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
2nd
Lykarsis said:
What exactly is this?
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
It's a development hboot with more features and commands.
Lykarsis said:
What exactly is this?
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
It unlocks all the fastboot commands, shows more system info and hardware info, and lets you flash even more stuff then just being unlocked and S-OFF. :good:
Zarboz said:
it would be while in system
su
dd if=/pathtonewhboot of=/dev/block
yourhbootpartition
Click to expand...
Click to collapse
What's the DNA hboot partition?
Sent from my HTC6435LVW using Tapatalk HD
idkwhothatis123 said:
What's the DNA hboot partition?
Sent from my HTC6435LVW using Tapatalk HD
Click to expand...
Click to collapse
If you can't find it, you can try my method. :good:
Delete Please!
Droid DNA
Argumentation said:
If you can't find it, you can try my method. :good:
Click to expand...
Click to collapse
Worked perfectly for me, the bar got stuck 3/4 but the terminal had it finished, just issued a fastboot reboot.
Now..for the radio...fastboot flash radio <radio.img>?
Edit: nvm got the radio done too, for those wondering like I was, I was correct its fastboot flash radio radio.img. My first HTC device so I'm still learning.
can this be flashed the same way we used to do with the TBolt? by placing the appropriate file name on the root of the SDcard and it will automatically load when booted into hboot... it looks like PL83IMG.zip is the proper name... and where can I get the radios from the OTA update or do I just pull it from the OTA PKG?
two_cents said:
can this be flashed the same way we used to do with the TBolt? by placing the appropriate file name on the root of the SDcard and it will automatically load when booted into hboot... it looks like PL83IMG.zip is the proper name... and where can I get the radios from the OTA update or do I just pull it from the OTA PKG?
Click to expand...
Click to collapse
Since we have no SD card, HBOOT doesn't look for the PL83IMG file, and yes, just pull the radios from the OTA and fastboot flash them and you should be good.
two_cents said:
can this be flashed the same way we used to do with the TBolt? by placing the appropriate file name on the root of the SDcard and it will automatically load when booted into hboot... it looks like PL83IMG.zip is the proper name... and where can I get the radios from the OTA update or do I just pull it from the OTA PKG?
Click to expand...
Click to collapse
Since the DNA does not have an SDCard, it does not search for a PL83IMG.zip to the best of my knowledge. The updated firmware can be found in the firmware.zip in the OTAPkg.zip: http://www.androidfilehost.com/?fid=9390288116658474558
im confused on how to extract the radio.img.. after i unzip the ota i cant extract the files from the firmware.zip it keeps giving me an invalid error... do we need this hboot just to flash a radio?
Argumentation said:
I ended up flashing it a bit differently, I made a PL83IMG.zip and did
Code:
fastboot oem rebootRUU
then
Code:
fastboot flash zip PL83IMG.zip
and it worked beautifully :good::laugh:
Click to expand...
Click to collapse
Thanks for this example. I used it to flash the radio from 2.04 update. :good:
pio_masaki said:
Worked perfectly for me, the bar got stuck 3/4 but the terminal had it finished, just issued a fastboot reboot.
Now..for the radio...fastboot flash radio <radio.img>?
Edit: nvm got the radio done too, for those wondering like I was, I was correct its fastboot flash radio radio.img. My first HTC device so I'm still learning.
Click to expand...
Click to collapse
I get:
FAILED (remote: not allowed)
orangechoochoo said:
I get:
FAILED (remote: not allowed)
Click to expand...
Click to collapse
You have to flash the ENG HBOOT first to unlock all the commands. :good:
Sent from my HTC6435LVW using xda app-developers app
This thread can provide the nandroid backup for the latest update from HTC for Asia_WWE
The CID's on which this backup will work are HTC__044, HTC__038
NOTE: This is NOT ROOTED
Flash it using TWRP
Flash the kernel from fastboot which is inside the Nandroid Backup as boot.emmc.win
If u want to update ur Hboot from 1.40 flash the firmware.zip from the fastboot using the following commands
If u are already on hboot 1.72 DONT FLASH THIS IT DOESNT MAKE ANY SENSE to flash something u already have
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip(2 times)
Links
Nandroid Backup
Firmware
STOCK RECOVERY
[email protected] said:
This thread can provide the nandroid backup for the latest update from HTC for Asia_WWE
The CID's on which this backup will work are HTC__044, HTC__038
NOTE: This is NOT ROOTED
Flash it using TWRP
Flash the kernel from fastboot which is inside the Nandroid Backup as boot.emmc.win
If u want to update ur Hboot flash the firmware.zip from the fastboot using the following commands
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip(2 times)
Links
Nandroid Backup
Firmware
Click to expand...
Click to collapse
I just want to know is this update from HTC have any Indian language other than Hindi?? Pls confirm.
sankhauaa said:
I just want to know is this update from HTC have any Indian language other than Hindi?? Pls confirm.
Click to expand...
Click to collapse
There is no any lang....
[email protected] said:
This thread can provide the nandroid backup for the latest update from HTC for Asia_WWE
The CID's on which this backup will work are HTC__044, HTC__038
NOTE: This is NOT ROOTED
Flash it using TWRP
Flash the kernel from fastboot which is inside the Nandroid Backup as boot.emmc.win
If u want to update ur Hboot flash the firmware.zip from the fastboot using the following commands
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip(2 times)
Links
Nandroid Backup
Firmware
Click to expand...
Click to collapse
My cid number is 11111111 supercid..could i install it?
Hun__kan said:
My cid number is 11111111 supercid..could i install it?
Click to expand...
Click to collapse
Yes you can dude.......
firmware file
firmware file is curopt its not opening in winzip saysing error: central directory not found.
shivangshukla said:
firmware file is curopt its not opening in winzip saysing error: central directory not found.
Click to expand...
Click to collapse
NOTE Since ur hboot is already 1.72 u dont have to flash the firmware.zip
[email protected] said:
NOTE Since ur hboot is already 1.72 u dont have to flash the firmware.zip
Click to expand...
Click to collapse
Okay anybody knows where i can find my right nandroid backup (Europe) for my device,
and a little description??
[email protected] said:
This thread can provide the nandroid backup for the latest update from HTC for Asia_WWE
The CID's on which this backup will work are HTC__044, HTC__038
....
Nandroid Backup
Firmware
Click to expand...
Click to collapse
Hi,
do you have the recovery for this ROM too? Actually I am planning to sell of my HOX+ and one more thing - if I flash this and then install recovery and relock the bootloader, it will get official updates - right?
Addicted2xda said:
Hi,
do you have the recovery for this ROM too? Actually I am planning to sell of my HOX+ and one more thing - if I flash this and then install recovery and relock the bootloader, it will get official updates - right?
Click to expand...
Click to collapse
Yeah bro....
Updates must be okay.....:good::good:
[email protected] said:
Yeah bro....
Updates must be okay.....:good::good:
Click to expand...
Click to collapse
Can you please share the recovery image too pls ?
Addicted2xda said:
Can you please share the recovery image too pls ?
Click to expand...
Click to collapse
Link added to OP bro.........and here u go
Hi, My dad's got the One X+, and i dont know what he's done, but its got no radio whatsoever, and its my job to pick up the pieces. He's got the indian version, so im figuring the nandroid you've made will work. Does the nandroid include Radio, baseband etc? If not, can you point me the direction of an RUU, as most of the ones ive found have broken links, and download stops halfway.
sid3091 said:
Hi, My dad's got the One X+, and i dont know what he's done, but its got no radio whatsoever, and its my job to pick up the pieces. He's got the indian version, so im figuring the nandroid you've made will work. Does the nandroid include Radio, baseband etc? If not, can you point me the direction of an RUU, as most of the ones ive found have broken links, and download stops halfway.
Click to expand...
Click to collapse
No the nandroid backup does not contain the radio and baseband but u can flash it separately from fastboot...
what is ur hboot version........?????????
[email protected] said:
No the nandroid backup does not contain the radio and baseband but u can flash it separately from fastboot...
what is ur hboot version........?????????
Click to expand...
Click to collapse
Hi, its got HBOOT- 1.30.0000, S-ON
sid3091 said:
Hi, its got HBOOT- 1.30.0000, S-ON
Click to expand...
Click to collapse
this RUU will work....
[email protected] said:
this RUU will work....
Click to expand...
Click to collapse
Thanks for your reply, but ive tried downloading this RUU many times and it just halts midway. Ive tried downloading it from two seprate internet connections as well. :crying:
sid3091 said:
Thanks for your reply, but ive tried downloading this RUU many times and it just halts midway. Ive tried downloading it from two seprate internet connections as well. :crying:
Click to expand...
Click to collapse
Sorry then u can request anyone to share it........
Have you tried it from Whiskey's thread?
Sent from my LG-E988 using XDA Premium 4 mobile app
I CANNOT FLASH IT ON TWRP Please help me out!! i need to gain back my warranty as the phone is acting up weird and get it repaired.
HTC One AT&T RUU 3.17.502.3 - Decrypted RUU zip:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3-decrypted.zip
Firmware only: firmware_3.17.502.3.zip
This is the 'rom.zip' that is normally packaged in the RUU.exe. It can be flashed with s-off only, since it's unsigned. Mainly for those that want system image, radio, firmware, etc. for ???
CID: CWS__001
To flash (s-off only):
Code:
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip [I]rom.zip[/I]
Replace rom.zip with the actual zip file name.
cschmitt said:
HTC One AT&T RUU 3.17.502.3 - Decrypted RUU zip:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3-decrypted.zip
This is the 'rom.zip' that is normally packaged in the RUU.exe. It can be flashed with s-off only, since it's unsigned. Mainly for those that want system image, radio, firmware, etc. for ???
CID: CWS__001
To flash (s-off only):
Code:
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip [I]rom.zip[/I]
Replace rom.zip with the actual zip file name.
Click to expand...
Click to collapse
Thank you for sharing. Is the full RUU.exe file available to download as well? If so, are you able to share the location or does the general public have to wait?
tarund said:
Thank you for sharing. Is the full RUU.exe file available to download as well? If so, are you able to share the location or does the general public have to wait?
Click to expand...
Click to collapse
The RUU.exe is on HTC's website, someone posted a link to it in the 4.3 thread over in the general section.
cschmitt said:
The RUU.exe is on HTC's website, someone posted a link to it in the 4.3 thread over in the general section.
Click to expand...
Click to collapse
here is RUU.exe link http://dl3.htc.com/application/RUU_...13_10.38j.1157.04_release_334235_signed_2.exe
cschmitt said:
HTC One AT&T RUU 3.17.502.3 - Decrypted RUU zip:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3-decrypted.zip
This is the 'rom.zip' that is normally packaged in the RUU.exe. It can be flashed with s-off only, since it's unsigned. Mainly for those that want system image, radio, firmware, etc. for ???
CID: CWS__001
To flash (s-off only):
Code:
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip [I]rom.zip[/I]
Replace rom.zip with the actual zip file name.
Click to expand...
Click to collapse
It's taking for ever to download the decrypted zip. Is it anyway you can remove the largest file and allow me to download so I can make a firmware package. Don't really need the system img.
godfirst said:
It's taking for ever to download the decrypted zip. Is it anyway you can remove the largest file and allow me to download so I can make a firmware package. Don't really need the system img.
Click to expand...
Click to collapse
Added firmware only link in the OP.
cschmitt said:
Added firmware only link in the OP.
Click to expand...
Click to collapse
It was taking me forever to try and get the ruu I have decrypted between my mac and pc, lol. I noticed to that ATT has a different listed radio compared to the RUU downloaded from HTC.
godfirst said:
It was taking me forever to try and get the ruu I have decrypted between my mac and pc, lol. I noticed to that ATT has a different listed radio compared to the RUU downloaded from HTC.
Click to expand...
Click to collapse
I noticed that too, OTA radio is a more recent version.
cschmitt said:
I noticed that too, OTA radio is a more recent version.
Click to expand...
Click to collapse
Alright this is what I've done, I've flashed old touch drivers and then used the 1.26.502.15 rom to flash in recovery. My phone is downloading the 4.3 ota now. How can I copy the ota from my phone?
Edit: Done!
This is the easiest way to return to stock correct?
darkstarinc said:
This is the easiest way to return to stock correct?
Click to expand...
Click to collapse
Depends if your s-on or s-off and what it is your trying to do?
godfirst said:
Depends if your s-on or s-off and what it is your trying to do?
Click to expand...
Click to collapse
I have s-off. My goal is to get to stock 4.3, but have root. Just no custom rom.
darkstarinc said:
I have s-off. My goal is to get to stock 4.3, but have root. Just no custom rom.
Click to expand...
Click to collapse
You have one or two options. You can go to my thread and flash the firmware package and then the new radio, then flash a stock 4.3 rom in the ATT thread. Or you can go to this thread http://forum.xda-developers.com/showthread.php?t=2474782 download the 1.26.502.15 rom and flash, take the ota, reboot and flash your custom recovery and if it's twrp allow it to root and done. Also if you could do fastboot getvar all in boot loader so we could know what firmware, etc. your on would be helpful.
I'm on mobile atm and won't be near a computer for a while, can someone tell me what radio version is included? Is it the 4T radio from the prior AT&T leak?
Sent from my HTC One using Tapatalk 4
icephreaq said:
I'm on mobile atm and won't be near a computer for a while, can someone tell me what radio version is included? Is it the 4T radio from the prior AT&T leak?
Click to expand...
Click to collapse
The RUU contains radio: 4A.19.3263.13_10.38j.1157.04
The OTA contains radio: 4T.20.3218.13_10.12.1718.01L
I was able to flash the ruu.zip file and return to stock without issues. Currently rooted and using CID CWS__01 -- All after I flashed the ruu, and entered the bootloader, it reported my CID as 1111111 (this was before I changed it).
I've done a ton with firmware zips but haven't flashed an RUU yet. Will an RUU zip clear storage as well? Kind of want to play around with the stock experience for a couple days before ViperOne 4.3 makes an appearance.
Sent from my HTC One using Tapatalk 4
icephreaq said:
I've done a ton with firmware zips but haven't flashed an RUU yet. Will an RUU zip clear storage as well? Kind of want to play around with the stock experience for a couple days before ViperOne 4.3 makes an appearance.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Yes, ruu wipes storage.
Sent from my HTC One using Tapatalk 4
godfirst said:
Yes, ruu wipes storage.
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Thanks, I'll be sure to make backups before I begin. I'm s-off with supercid and currently running a custom 3.22 firmware by sneakyghost. Anything I need to be aware of aside from the storage wipe before I leap?
Sent from my HTC One using Tapatalk 4
icephreaq said:
Thanks, I'll be sure to make backups before I begin. I'm s-off with supercid and currently running a custom 3.22 firmware by sneakyghost. Anything I need to be aware of aside from the storage wipe before I leap?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
No that's about it. I was actually on the 3.22 firmware and was able to revert to stock older rom and take the ota.
Sent from my HTC One using Tapatalk 4
Here's the Rom.zip I pulled from the AT&T 4.18.502.7 RUU
Encrypted version is Removed until i find another source (file was damaged, sorry for any inconvenience )
This will work if your s-off and your modelid: PN0712000 and CID: CWS__001
or you can EDIT the Android-info.txt to match your MID and CID
Decrypted version is here >> http://www.androidfilehost.com/?fid=23329332407580500
Huge thanks to @nkk71 for decrypting the files
And another Big thanks to @AndroidFileHost for the source RUU
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_decrypted.ROM.zip
Instructions for flashing
If your s-on be sure the bootloader is locked
fastboot oem lock
Copy your downloaded file to your fastboot / adb folder
Rename the file Rom.zip
open a command prompt in the same folder (shift + right click - command prompt here )
adb reboot-bootloader
fastboot commands:
fastboot oem rebootRUU
wait for the Silver HTC logo
fastboot flash zip Rom.zip
the first time you issue a command to flash firmware/ruu in fastboot it only prepares the flash. You have to issue the exact command again:
fastboot flash zip Rom.zip
most times the green status bar does not reach the 100% mark. So when the output in the command window is complete, you can reboot:
fastboot reboot
I find these files much easier to use than the RUU.exe and these can be flashed with a MAC or Linux ....Have Fun !!
:good: :good:
clsA said:
Here's the Rom.zip I pulled from the AT&T 4.18.502.7 RUU
This will work if your s-on and your modelid: PN0712000 and CID: CWS__001
Encrypted version is here >> http://www.androidfilehost.com/?fid=23329332407580207
This will work if you s-off and your modelid: PN0712000 and CID: CWS__001
or you can EDIT the Android-info.txt to match your MID and CID
Decrypted version is here >> http://www.androidfilehost.com/?fid=23329332407580500
Huge thanks to @nkk71 for decrypting the files
And another Big thanks to @AndroidFileHost for the source RUU
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_decrypted.ROM.zip
Instructions for flashing
Copy your downloaded file to your fastboot / adb folder
Rename the file Rom.zip
open a command prompt in the same folder (shift + right click - command prompt here )
adb reboot-bootloader
fastboot commands:
fastboot oem rebootRUU
wait for the Silver HTC logo
fastboot flash zip Rom.zip
the first time you issue a command to flash firmware/ruu in fastboot it only prepares the flash. You have to issue the exact command again:
fastboot flash zip Rom.zip
most times the green status bar does not reach the 100% mark. So when the output in the command window is complete, you can reboot:
fastboot reboot
I find these files much easier to use than the RUU.exe and these can be flashed with a MAC or Linux ....Have Fun !!
Click to expand...
Click to collapse
thanks again, much appreciated! I will give it a few more minutes but I work at 6am!
a little help please
I just put my One back to stock. S-on, relocked, tamper gone, etc When I try to update using the above method i get
C:\Android>fastboot flash zip Rom.zip
sending 'zip' (1519630 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.002s
any ideas? thank you!
gsxrfl1k6 said:
I just put my One back to stock. S-on, relocked, tamper gone, etc When I try to update using the above method i get
C:\Android>fastboot flash zip Rom.zip
sending 'zip' (1519630 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.002s
any ideas? thank you!
Click to expand...
Click to collapse
I just tested it and had the same problem ...I'll update when I get the new file uploaded
clsA said:
I just tested it and had the same problem ...I'll update when I get the new file uploaded
Click to expand...
Click to collapse
I'm also having the same issue. Have you been able to figure out what is wrong?
TaDoey said:
I'm also having the same issue. Have you been able to figure out what is wrong?
Click to expand...
Click to collapse
Well near as I can tell the RUU did not originate from HTC, someone was able to create it and sign it same as HTC would. But the files behave differently than the "Real" HTC RUU. The only solution I found was to use the True HTC RUU from 3.xx.502.x and OTA to 4.xx.502.x to 5.xx.502.x. It requires s-off to flash the OTA's so it's not the perfect solution for everyone.
HEllo, friend now i feel very dissapointed thus i was not able to update my phone is a htc one M7 7120 from AT$T running this useless firmware 1.26.502.12, im in Colombia myabe thats why the AT&T system update is not working and i tried to run that RUU 3.X.502... but it still giving me the ERROR 158, any idea how can i update this phone? Thank man hope u can answer me.
Sli2cooL said:
HEllo, friend now i feel very dissapointed thus i was not able to update my phone is a htc one M7 7120 from AT$T running this useless firmware 1.26.502.12, im in Colombia myabe thats why the AT&T system update is not working and i tried to run that RUU 3.X.502... but it still giving me the ERROR 158, any idea how can i update this phone? Thank man hope u can answer me.
Click to expand...
Click to collapse
Is your bootloader locked/relocked?
Are you S-OFF or S-ON?
What is the CID?
Is this the RUU 3.17.502.3 that you are trying to run?
You will not get any AT&T updates if you are not on the AT&T network!
If you are not S-OFF, I would recommend obtaining S-OFF then rebrand your phone to the International (.401) variant. Then you could get the OTA updates and not worry about the AT&T network.
majmoz said:
Is your bootloader locked/relocked?
Are you S-OFF or S-ON?
What is the CID?
Is this the RUU 3.17.502.3 that you are trying to run?
You will not get any AT&T updates if you are not on the AT&T network!
If you are not S-OFF, I would recommend obtaining S-OFF then rebrand your phone to the International (.401) variant. Then you could get the OTA updates and not worry about the AT&T network.
Click to expand...
Click to collapse
Hello mate, thanks for the reply, now that you mention it sounds pretty interesting to rebrand to phone to int. variant, but... How do i ado that? Right now im running 4.18.502.7 Stock for AT&T, i would not liek to bother you so much but is there any way to do that i wouls appreciate the help.
Yes im S-OFF and yes im unlocked, TWRP tho, CWS__001, hboot 1.44.000000 and rooted.
Once again thanks for the help.
Sli2cooL said:
Hello mate, thanks for the reply, now that you mention it sounds pretty interesting to rebrand to phone to int. variant, but... How do i ado that? Right now im running 4.18.502.7 Stock for AT&T, i would not liek to bother you so much but is there any way to do that i wouls appreciate the help.
Yes im S-OFF and yes im unlocked.
Once againm thans for the help.
Click to expand...
Click to collapse
Here is a outline of what you will need to do.
Here are the steps to re-branding your phone to Int'l:
Unlock bootloader if not unlocked already!
Install Custom recovery
Download TWRP 2.6.3.3 from here: http://techerrata.com/browse/twrp2/m7
Achieve S-OFF, if not already!
With your hboot 1.5x use rumrunner or firewater to get S-Off: http://firewater-soff.com/ or http://rumrunner.us/
Try all options!
Change CID to the new code:
Code:
[B][I]adb reboot bootloader
fastboot oem writecid HTC__001[/I][/B] <- (CID is exactly 8 characters)
[B][I]fastboot reboot-bootloader[/I][/B]
Change MID to the new code: PN0710000 using: [TOOL] MID change without ENG HBOOT | Aroma GUI
Remove "Tampered" with the Guru Bootloader Reset Tool
Download and flash 4.19.401.9 firmware; place firmware in your fastboot/adb folder and rename to firmware.zip. Ensure you have moved all of your personal items off of your phone this firmware will wipe your phone. Open a command window in your fastboot/adb folder and type:
Code:
[B][I]adb reboot bootloader[/I][/B]
After that, type:
Code:
[B][I]fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
[B][I]fastboot reboot[/I][/B]
Execute http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_htc_europe_4-19-401-9_r_radio_4a-23-3263-28_10-38r-1157-04l_release_353069_signed_2-1-exe/ which now matches your CID & MID
There is no need to lock/relock bootloader with S-OFF, and do not even THINK about going back to S-ON!!!
Now you can receive the OTAs or flash them manually.
OTA_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.11-4.19.401.9_R_release_355954met8o678uio0omu3.zip
OTA_M7_UL_K44_SENSE60_MR_HTC_Europe_5.11.401.10-4.19.401.11_release_372404wj19h95c0x6oa19n.zip
OTA_M7_UL_K443_SENSE60_MR_HTC_Europe_6.09.401.5-5.11.401.10_release_386803.zip
OTA_M7_UL_K443_SENSE60_MR_HTC_Europe_6.09.401.10-6.09.401.5_release_397712mm1f6dd6rksg0p3s.zip
Click to expand...
Click to collapse
majmoz said:
Here is a outline of what you will need to do.
Click to expand...
Click to collapse
Thansk for the reply mate is it neccesary to change the MID of the phone?
Also the hboot is it good at 1.44?
Sli2cooL said:
Thansk for the reply mate is it neccesary to change the MID of the phone?
Also the hboot is it good at 1.44?
Click to expand...
Click to collapse
Only if it is different. I don't know your MID but if it is different from the Int'l MID then you will not be able to flash the firmware, RUU or OTAs.
Yes, it will change when you flash the firmware & RUU. I would keep a copy of it for future use.
majmoz said:
Only if it is different. I don't know your MID but if it is different from the Int'l MID then you will not be able to flash the firmware, RUU or OTAs.
Click to expand...
Click to collapse
I think it is 712000 from AT&T, quite different right?
Sli2cooL said:
I think it is 712000 from AT&T, quite different right?
Click to expand...
Click to collapse
Yes, just think you should only have to change it once!
majmoz said:
Yes, just think you should only have to change it once!
Click to expand...
Click to collapse
Ho danm , then i cannot get back to 7120? Anyways Int goes better i guess, no malfunction on LTE/4G?
Sli2cooL said:
Ho danm , then i cannot get back to 7120? Anyways Int goes better i guess, no malfunction on LTE/4G?
Click to expand...
Click to collapse
You can go back; just do the same steps for AT&T. If you have LTE/4G now you will still have LTE/4G after this process does not change the bands that are hard coded into the phone. The radio in the software merely enhances the bands that are in the phone but can not replace them.
majmoz said:
You can go back; just do the same steps for AT&T. If you have LTE/4G now you will still have LTE/4G after this process does not change the bands that are hard coded into the phone. The radio in the software merely enhances the bands that are in the phone but can not replace them.
Click to expand...
Click to collapse
Okey buddy thansk again for the help ill be trying it tomorrow and ill be updating the process. :good:
I missed this one, well it went well, now i can recieve the OTAs in auto mode, THX for the help @majmoz.
Sorry but when I type "fastboot flash zip Rom.zip" fastboot stops, Someone, can help me? :crying:
I'm S-ON
hboot 1.57
CID: CWS__001
Just got an update notification, haven't installed it yet.
http://fotadl.htc.com/OTA_ENRC2B_U_...2.18.401.2_release_368363utzc3g7jcfsw7nnx.zip
Description:
This update contains important enhancements and bug fixes, including:
-Security fix for heartbleed bug
Click to expand...
Click to collapse
I updated and I think my battery health is better. What about other users? Do u see any changes?
Sent from my HTC One X+ using XDA Free mobile app
I've installed the update now (on top of my custom ROM).
Vibration when I press the capacitive buttons or use the unlock pattern has stopped working. I do have "Settings->Sound->Vibrate on touch" ticked. Has anyone else seen this problem?
EDIT: after lots of fiddling vibrate on touch works. I'm beginning to think I might have been imagining things!
I will install it tomorrow and say if something changed apart. I really hope they took care about other HOX bugs, not just that damn heartbleed.
I try to install on rooted last stock, but it reboot in recovery (twrp)... Rebooted, phone is ok but update not installed... Help?
From what I know, stock OTA updates can only be installed on stock recovery. Not TWRP or CWM.
When in TWRP just browse to the downloaded .zip file (sdcard or download folder) and install manually.
Mine is installed the exact same way and no problem (Rooted, latest stock ROM and TWRP)
siroj said:
When in TWRP just browse to the downloaded .zip file (sdcard or download folder) and install manually.
Mine is installed the exact same way and no problem (Rooted, latest stock ROM and TWRP)
Click to expand...
Click to collapse
That only installs part of the update. You also need to extract the downloaded .zip file and flash the firmware.zip (see instructions 4-7 in http://forum.xda-developers.com/showthread.php?t=2414238). Flashing firmware.zip is a pain because you have to relock your bootloader, and then when you unlock it again (to reflash custom recovery) your entire phone is wiped, so you need to backup the whole 64GB before starting the process and restore it afterwards.
However, there is no hboot in the 2.18.401.3 firmware.zip so for this OTA in particular you just need to extract the boot.img from firmware.zip and flash it with
Code:
fastboot flash boot boot.img
which doesn't require a wipe.
Differences between 2.18.401.2 and 2.18.401.3 firmware:
Code:
diff -ur OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.2-1.17.401.1_release_330344jn0li1htdzwgcxja/firmware/android-info.txt OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.3-2.18.401.2_release_368363utzc3g7jcfsw7nnx/firmware/android-info.txt
--- OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.2-1.17.401.1_release_330344jn0li1htdzwgcxja/firmware/android-info.txt 2013-08-02 07:36:48.000000000 +0100
+++ OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.3-2.18.401.2_release_368363utzc3g7jcfsw7nnx/firmware/android-info.txt 2014-04-18 10:38:33.000000000 +0100
@@ -8,7 +8,7 @@
cidnum: HTC__M27
cidnum: HTC__203
cidnum: HTC__A07
-mainver: 2.18.401.2
+mainver: 2.18.401.3
btype:1
aareport:1
hbootpreupdate:12
Binary files OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.2-1.17.401.1_release_330344jn0li1htdzwgcxja/firmware/boot.img and OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.3-2.18.401.2_release_368363utzc3g7jcfsw7nnx/firmware/boot.img differ
Only in OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.2-1.17.401.1_release_330344jn0li1htdzwgcxja/firmware: hboot_enrc2b_1.72.0000_signedbyaa.img
Binary files OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.2-1.17.401.1_release_330344jn0li1htdzwgcxja/firmware/recovery.img and OTA_ENRC2B_U_JB_50_S_HTC_Europe_2.18.401.3-2.18.401.2_release_368363utzc3g7jcfsw7nnx/firmware/recovery.img differ
I cannot install this update in my hox+.I press install now,seems it restarts but stacks at the htc logo with the white font..any ideas?
I installed this update but I can not see any diference...
frankoid said:
That only installs part of the update. You also need to extract the downloaded .zip file and flash the firmware.zip (see instructions 4-7 in http://forum.xda-developers.com/showthread.php?t=2414238). Flashing firmware.zip is a pain because you have to relock your bootloader, and then when you unlock it again (to reflash custom recovery) your entire phone is wiped, so you need to backup the whole 64GB before starting the process and restore it afterwards.
However, there is no hboot in the 2.18.401.3 firmware.zip so for this OTA in particular you just need to extract the boot.img from firmware.zip and flash it with
Code:
fastboot flash boot boot.img
which doesn't require a wipe.
Click to expand...
Click to collapse
Thanks for the explanation.
But i'm still a lit bit confused. My HOX+ is rooted with latest stock ROM. Can i use the OTA classic process or do i have to use TWRP ?
Kitof said:
My HOX+ is rooted with latest stock ROM. Can i use the OTA classic process or do i have to use TWRP ?
Click to expand...
Click to collapse
Have you unlocked your bootloader?* If so I don't think that the standard OTA process will work, although I haven't personally tried it.
*I expect you have if you are rooted because I'm not aware of a way of rooting a S-ON HOX+ without unlocking the bootloader
Just to be clear, this file is only for the international HOX+ and attempting to install it on the AT&T variety would cause all hell to break lose, correct?
Also, if one were to install this on a custom, rooted rom the process would be to flash the boot.img then install the zip from twrp/cwm?
I just want to be certain I'm understanding everything. Thanks!
gokun said:
Just to be clear, this file is only for the international HOX+ and attempting to install it on the AT&T variety would cause all hell to break lose, correct?
Click to expand...
Click to collapse
Yes
gokun said:
Also, if one were to install this on a custom, rooted rom the process would be to flash the boot.img then install the zip from twrp/cwm?
Click to expand...
Click to collapse
...and yes!
frankoid said:
Have you unlocked your bootloader?* If so I don't think that the standard OTA process will work, although I haven't personally tried it.
*I expect you have if you are rooted because I'm not aware of a way of rooting a S-ON HOX+ without unlocking the bootloader
Click to expand...
Click to collapse
Boot in TWRP : Install zip file.
Boot in fastboot : Flash boot.img.
Reboot in system => Still root (TWRP fix it before reboot), and updated.
Just perfect. (and lost apk are back (like light).
Thanks a lot
I think the heartbleed fix in really the only thing they changed. The 8 MP camera bug is still present. Shame on you HTC!
Thank you, this was really helpful. Gonna try to go back stock when I get home.
Can someone tell his experience with the New update what are the changes in performance
Sent from my One X+ using XDA Premium 4 mobile app
jizang said:
Can someone tell his experience with the New update what are the changes in performance
Sent from my One X+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't think there are any changes in this update except the heartbleed security fix.
Sent from my LG-V500 using XDA Free mobile app