I've successfully made an OTG cable. It works fine.
I have also rewrired my monoprice 11pin to 5pin MHL adapter directly to my MHL output with a 40.2Ohm resistor. The phone recognizes it as a smartdock and the MHL/charging is all working. I am running TW rooted...
However when I add the proper connections to another OTG adapter, I don't get any USB enumeration. I can post pics and pinouts if anyone cares..
Monoprice part of the 9-5 adapter is 9716... I can't post links yet.
Anyone have an idea of how or why USB enumeration isn't working? I get power to said USB device, but nothing shows up on the phone side that a USB device is connected or working... I verified the device with the original OTG cable I made, so I know the mouse works just fine there.
SOB
Related
I just found a MHL cable for the SGS2 on Amazon with Micro-USB to HDMI.
I have a Samsung HDTV bought about a year ago. Now i know that MHL means you can charge as well as view the phone stuff on the screen but MHL TVs have not released yet (i think, and even if they have i wont be getting one anytime soon).
So my question is can i still see the TV out if i use the MHL cable on my older TV? I know it definitely wont charge.
Anyone?? :S
yes you can.
all you need is the adapter from MHL (micro-USB) to HDMI, connect the HDMI to the TV and you are good to go.
the advantage of the original samsung adapter is the ability to connect a power cable to the adaptor and charge the phone while it transmits the picture to the TV.
hope i helped
Thanks mate
For anyone confused, an MHL cable is a Micro USB to HDMI cable - no ifs, no buts, this will transmit HDMI from a compatible MHL port. Nothing else needed (except I believe it must also be connected to power)
Your micro USB port on the bottom of your SGS2 is an MHL/USB port, and will therefore work.
Important to note is that not all micro USB ports are also MHL ports, therefore will not necessarily work on some other micro USB port on a different phone.
Has anyone made an OTG cable for the TFP? I don't like the chunky USB OTG connector and thought an OTG cable would be much better.
Not quite sure what you mean.
The only proper usb connector is a standard type A connector located on the keyboard, it has insufficient pins to implement OTG. The only other usb connectors are the propriety asus ones, one on the tablet and one on the keyboard, the other small connector on the tablet is HDMI output
I have the "chunky" USB OTG connector as well.. I don't think there's a cable though... I looked everywhere on the net
I don't have a dock therefore the only way I can plug a USB flash drive, Keyboard/mouse into the TFT is via the ASUS USB OTG Host adapter View attachment 1384503
I was after something a little slimmer and believe a OTG cable would be ideal - Refer to picture for an example of what I'm referring to View attachment 1384504
Micro USB OTG cables can be used with many phones and tablets sporting a micro USB connector. The TFP obviously doesn't have a micro USB connector therefore I was hoping someone knew how to make an ASUS 40 pin to female Type-A plug which replicates the ASUS USB OTG Host adapter.
Has anyone pulled apart the ASUS USB OTG host apapter? What's inside it?
Hey guys. There are several articles and videos around on how to make your own OTG cable. It essentially involves shorting a single pin. I have no idea if it'll work with a TFP, but I'm going to give it a shot today or tomorrow if I get some time. My plan is to use the normal TFP USB cable, but plug it into a female/female USB gender changer that has been modified to short the pin. I'm almost positive that it'll work on my SGS3, and I don't see why it wouldn't also work for my TFP. I'll report back.
Nevermind. I now see that the TFP USB end has five pins, so they won't match up with the 4-pin female USB port. Oh well...
TFP and OTG
Does anyone know if the OTG will support a USB hub?
gtan2589 said:
Does anyone know if the OTG will support a USB hub?
Click to expand...
Click to collapse
The TFP doesn't have OTG, it's a regular USB host.
So yea, it will support a hub because it's a standard USB device class, with its driver already part of the kernel.
Hi,
Has anyone managed to successfully find a solution to give an hdmi out display from the note pro 12.2, at the same time as a usb port via otg cable.
What I essentially want to do is to have the note pro at my desk connected via hdmi to a monitor, and still be able to use usb devices such as pen drives etc. Is there any kind of cable combination that will allow for this? I've not been able to find anything.
Thanks
Duncan
I have these:
Usb 3.0 Hub:
http://es.aliexpress.com/store/prod...k-Desktop-4-Port-USB3/1229374_2047737882.html
Usb OTG (with connection for external charger, a must have if you're gonna power devices via USB)
http://es.aliexpress.com/item/CY-Mi...th-USB-Power-for-Galaxy-Note3/1992861830.html
USB A to microUSB adapter, this one is for the HDMI cable:
http://es.aliexpress.com/item/Free-...PE-Male-TO-Micro-USB-5P-Female/882304680.html
You should try all-share-cast or screen cast(via miracast/chromecast) for video and audio. That would do everything easier.
I have a freeview TV adapter plugged into my note 3. Problem is I can't charge it so I have to stop watching TV and wait until its charged. Can I get anything like a micro USB hub. I've seen a few but they are only regular USB ports and not USB micro which I need for my devices. Thanks in advance.
I have MHL to HDMI adapter which hooks up to TV and to a phone charger (other side goes to phone) so it is possible, but I can't say if usb hub would work, since I have not test it.
You can connect a regular USB hub to your micro usb to usb OTG adapter. I tried connecting both a mouse and a keyboard to the hub and it works fine
USB hub won't allow you to charge the device while they are connected. you can either use MHL to HDMI cable as Pete4k advice and enjoy MHL 2.0 while charging or buy one of those USB OTG adapter reader but where you can connect several peripherals and charge at the same time.
One of the things I’m really amazed by with the modern PDAs is the USB OTG. So just as I found out that my Galaxy has it, I got myself an adapter (for less than $3) and tested it with several devices. Here’re my results:
USB flash drives: every single one I tried worked perfectly except a 1 GB drive of unknown vendor, which wasn't even recognized by the Galaxy, works okay with PCs thought.
External HDDs: the Toshiba 500 GB USB 3.0 drive wasn't recognized and didn't show any signs of life. Surprisingly, a 320 GB SATA WD Blue in a USB bay was detected and spinned up, but the Galaxy didn't recognize the file system and asked if I want to format it. I didn't, since the disk had some data I needed, but there's definitely a potential.
Input devices: all the mice and keyboards I tried worked as they should, both wired and wireless, which was expected. Which wasn't, is that DualShock3 controller from my PS3 was immediately recognized too without any additional drivers or software, it even let me control the menus. Sadly, that wasn't the case with my Logitech Freedom 2.4 wireless joystick. I guess the power wasn't enough.
Output devices: Sennheiser wired USB headset (basically, the USB sound adapter with the headset attached) worked as it should. HP LaserJet P1102 printer didn't work even with USB printing service installed.
Overally, I got much more then I dreamed of, especially since I heard that the OTG is very poor on a modern devices. DualShock3 success is especially cool.
This is quite weird as I have tried the original Samsung Micro USB OTG adapter, with the little white USB-C adapter and it did not work. This is on A3 2017.
There were rumors that USB OTG was disabled. Which adapter do you have?
W00fer said:
This is quite weird as I have tried the original Samsung Micro USB OTG adapter, with the little white USB-C adapter and it did not work. This is on A3 2017.
There were rumors that USB OTG was disabled. Which adapter do you have?
Click to expand...
Click to collapse
The rumors aren't true. The thing is, Type-C uses a different pinout for OTG, so it shouldn't be a combo of Type-C to Micro and Micro to Type-A OTG, it should be a special Type-C to Type-A OTG adapter. The adapter that comes with the device is good for charging only, or so I heard. I’ll photo my adapter, but I got it for almost nothing in a local computers store.
Agent_B-7 said:
The rumors aren't true. The thing is, Type-C uses a different pinout for OTG, so it shouldn't be a combo of Type-C to Micro and Micro to Type-A OTG, it should be a special Type-C to Type-A OTG adapter. The adapter that comes with the device is good for charging only, or so I heard. I’ll photo my adapter, but I got it for almost nothing in a local computers store.
Click to expand...
Click to collapse
Very interesting. A different pinout for OTG. Yeah I thought it was the combo that shoud have worked.
The little adapter comes with the device is said to be charge and sync. Because when connected to my PC it works. for data transfer.
http://www.nix.ru/autocatalog/usb_cables/KS-is-KS-297-Perehodnik-USB-AF-USB-C-M-OTG_279425.html
Here’s the one I got. The site is in Russian, but the pictures are self-explanatory.
I have an OTG now from Aliexpress. It works for my A3 2017. 90 degree angle connector.
Now onto an USB-C to HDMI. The official Samsung EE-HG950 does not work.
Agent_B-7 said:
The rumors aren't true. The thing is, Type-C uses a different pinout for OTG, so it shouldn't be a combo of Type-C to Micro and Micro to Type-A OTG, it should be a special Type-C to Type-A OTG adapter. The adapter that comes with the device is good for charging only, or so I heard. I’ll photo my adapter, but I got it for almost nothing in a local computers store.
Click to expand...
Click to collapse
So if i understand correctly the little "micro usb connector" that comes with the A5 2017 won't work for anything other than charging? I tried using it with a regular otg cable and it doesn't detect any flash drive, not even a ps3 controller, i don't even get the notification that a usb is plugged in.
But whats weird is if i use a male to male usb cable and connect to to a pc it works just fine. Any idea whats causing this?
Please help. I have the same problem. I have newly bought a5 2017. I already have otg usb drive sandisk. The adapter type c included in the box didn't work fine. Except only for charging when connected to usb 2.0.
My usb otg drive will become useless if it doesn't read by my device. What should i do? Or how to activate maybe my otg support? Tnx in advance.
shrekpido21 said:
Please help. I have the same problem. I have newly bought a5 2017. I already have otg usb drive sandisk. The adapter type c included in the box didn't work fine. Except only for charging when connected to usb 2.0.
My usb otg drive will become useless if it doesn't read by my device. What should i do? Or how to activate maybe my otg support? Tnx in advance.
Click to expand...
Click to collapse
The adapter from the box is just for charging and data transfer to compuer. If you want to use your flasdisk you can buy a new usb otg for type c slot.