[Help] Stuck on Motorola "pulsing" logo @ boot - Motorola Droid RAZR

Hi.
I've been using AOKP 4.2.2 rom for a few months, today I removed my SIM card to change it (phone powered off). After powering up, the phone would not boot the system. I entered recovery and flashed kernel - no difference. Next I cleaned all slots and flashed new CM10.1 rom to slot1. Again after reboot the phone was stuck with green led (for 30+ minutes, so I'm fairly certain it would not finish booting). Tried that again with other rom, again no change. So finally I started trusted old RsdLite (6.0) and flashed 4.0.4, it worked without problems, all 10 parts, restarted, did some things (long blue line) on the dead android logo, rebooted again and.....
Well, now my phone displays dual core logo, then "M" logo and sits there all the time (more than 1 hour anyway).
Tried that again, then tried EternityProject flasher, that one also completed without problems, rebooted, shown dead android logo (but did not do this blue line), rebooted again and is stuck in the same place.
Anyone know what may be wrong? Phone is without SIM and without SDcard. The last thing I can imagine is that there is something wrong with internal SDcard, some leftover from AOKP that were not deleted. Does using rsdlite equals complete wipe of all data including internal sd?
If not how can I force clean internal sdcard?
If I start the phone with USB connected, Autoplay pops up with MotoCast drivers from Motorola (seen as virtual CD drive), ADB does not detect device.
Here is a screenshot of successfull Rsdlite flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!!Solved - booted to stock recovery and did a full wipe. Who would have thought that Rsd would not do that.... Shame on me...

Happened to me also, haha glad you solved your problem
Sent from my XT910 using xda premium

Congrats,Yeah When in Bootloop Do a Full WIPE

Yeah, and it only took me like 6 hours to think about something THAT basic What a genius !! Oh well.... OTOH it's strange that rsdlite does not clean everything.... I still do not know if it was cache partition or user data partition as those are the ones full wipe cleans.

Related

[Q] Atrix soft (touch) buttons not responding

Hi xda community!
I've faced with a big problem. I'be been using Neutrino 1.4S rom. Then I desided to try Neutrino 2.1. I flashed it via CWM (5.0.2.7) and just after that flashed an Atrix-CM7-Kernel-024b4-ext4-1.30GHz.zip & rebooted.
And there was no red motorola logo (Dual Core technology) anymore but list with the options like:
- RSD
- Fastboot
...
- Android recovery
etc.
Something like this screenshot but w\out message "Failed to boot"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no actual photo of that screen as I had no camera with me ((
After 5 sec no pressing any key Neutrino started booting but stuked on boot animation. Screen was on & off periodicaly. But it didn't boot.
I tried to flash Neutrino 2.1 via CWM once again. But this time w\out flashing of faux 024b4 kernel. Result - the same.
Then Neutrino 1.4 S. Result - same.
Finally I flashed a stock AT&T rom (4.5.91) via RSD Lite. It booted successfully but...!! But no soft key responce! The key area is seems like a part of the screen. Like down part of screen been shifted down to key's area.
And I'm stucked on Blur registration as I can't open the keyboard to skip registration and can't pass it as I dont have a wifi spot around me.
Any saggustions?
P.S> Sorry for my English is so far from perfect. But I hope you've understood everything.. Last hope on you!
Here's the place where I downloaded faux 024b4 kernel
I have found a thread about the same problem like mine and I understood that I did the same steps as topic starter - TOPIC
liebowa said:
I selected 0kb. I should have just pulled battery just then, thinking about it now.
Anyways, I'm now getting a new menu when the phone starts that lists all of the OS boot choices.
If I don't select any choice fro mthe list, I get test that says: "Powering on BP" then next line "Cold-booting LINUX" then next line "Reading ODM Fuse: 1", then it boots into CM9.
But, the screen calibration is wrong and the buttons don't work on the phone.
Click to expand...
Click to collapse
this solved my problem
i had to open the bootloader by flashing this sbf since my usb debugging was disabled.
extract it first, then flash with RSD Lite.
snoer said:
this solved my problem
i had to open the bootloader by flashing this sbf since my usb debugging was disabled.
extract it first, then flash with RSD Lite.
Click to expand...
Click to collapse
Thank u so much! It really helped me! Yuuppi!! )

[HELP] Internal SD Card Gone, stock firmware won't flash

First of all, this is not related to any unsuccessfull flash process, I got my S3 in 2012 and it worked like a charm after many flash processes. The last ROM is - was :'( - Blekota Note 4 Lite 5.2
The problem came when this morning, I plugged my phone to charge, it was 3% battery, I left it for 1 hour and when I came back, the back of the phone was very hot and the phone screen hanging on the first image of boot animation. I unplugged it and removed battery, once turned on, it did not leave the samsung logo. I suppose the chip simply fried...
I was looking for a solution and found something that may be for help, but the solution i found was for SGS-I9000, the process did not work for my S3 (this one with two others related to sgs1), I formatted the sd card with 16GB Ext 4 and 16GB Fat32.
As I am not familiar with scripts and linux commands, my question is simple:
Is there a way to install a ROM in external SD card ? my phone starts in download mode and I am able to flash TWRP (or any other recovery) via odin, this one shows me Internal SD card capacity as 0 when I try to install anything. See attachments below, the red messages appear also when trying to flash stock firmware , after the first reboot (I9300XXEMD3_I9300OJVEMC1_I9300XXEMA5)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you cant mount anything, its either your internal storage is burnt too or corrupted from being affected by the burn. Your s3 might be basically destroyed
Jericho Arcelao said:
If you cant mount anything, its either your internal storage is burnt too or corrupted from being affected by the burn. Your s3 might be basically destroyed
Click to expand...
Click to collapse
That's the point of trying to install system in external SD
Unfortunately that is impossible. Sorry

i9300 failed to mount every partition, internal storage 0

Hi, i am new to this. I have galaxy s3 i9300.
My gf was using this phone on stock rom 4.3 or 4.4.4 and it was really awful. I am iphone user, but i do know a little about phones and all that so i tried to install some custom roms.
First i tried lineageOS 7.1.1, it was laggy, camera constantly crashing etc.
So i tried to install android M cm 13.0 unofficial teamseek v12.3. Less laggy but after installing telegram app, os crashed. Some trebuchet proccess was constantly rebooting phone. Messenger app could not use camera, black screen. And once phone could not see storage. Wiping cahce could not solve the problem. Meny restarts, nothing. I pulled out sim card and it boot, but after some time trebuchet crashed again and boot loop continued.
So i tried 4.4.4 kitkat cm-11-20160115-SNAPSHOT-XNH0E0O00N and same problem, messenger cant see camera app.
Then i tried 5.1 blisspop and it was good, messenger can see camera, little lag. And then it suddenly shutsdown on the charger. Tried restart - boot loop. TWRP cant wipe anything or mount anything, storage 0. Phone cant see memory card either, but i know its working because i put it in the other S3 which is in boot loop too .
What to do now, other s3 cant be recognized by the PC but can see memory card, and this s3 can be recognized by the PC but its shows empty.
Then i tried to install official 4.3 for s3 via Odin. Installed successfuly but same problem, cant mount any partition. Newest TWRP installed.
I am stucked here now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Did you try installing the latest stock rom with a pit file?
How to do that? What is pit file ? Where do i get it? Thanks
I did it!
Tried this :https://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
And then i got problem only for failed to mount /data. I did then https://www.youtube.com/watch?v=X7yDPszoQ5s
And then just flashed stock rom via odin

[Q] random crashing/system incidents

Hello,
I've got a weird problem with my M4
I've got the phone for over 2 years, it's the E2303 version. It worked perfectly normal until at some point it started randomly crashing (Note: the phone wasn't rooted at this point and it had Android 5.0 26.1.A.3.111 (carrier version)). The crash looks like this: the phone freezes for like 2-3 seconds not responding to any input, then the screen goes black, then it boots up normally. However it isn't rare for it to crash like that, then while booting up crash again in the same way, repeat a couple of times. In System incidents it's counted as just 1 incident. I also noticed that sometimes after successfully booting up after crash wi-fi, mobile transfer or airplane mode are switched on/off, not as before the crash.
I thought the problem would go away so I waited a bit, but it kept on crashing. Sometimes it can go for a few days without crashing, sometimes it crashes a few minutes after last crash.
I've tried fixing the phone using PC Companion (it also updated it to 6.0) - didn't help. I've tried flashing a stock 5.0 ROM using Flashtool (same as before: 26.1.A.3.111, but a non-carrier version) - also didn't help. Also I've got the phone rooted by now. I don't know about bootloader, the service menu tells me Bootloader unlock allowed: No, even though I've got the OEM unlocking switched on in the Developer options (I'm not that tech savvy in case of phones and I'm getting lost a little bit).
I've got some screenshots here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope there is a way to fix this phone, this crashing is starting to get a little annoying...
Any help would be really appreciated
Install twrp. Download latest stock rom. Format phone by wiping cache, system and data in twrp wipe option. Install flashtool and use it to install latest stock rom. Watch a tutorial on youtube How to install latest stock rom through twrp

Trying to wipe locked S7 Edge, can't go into recovery mode

Hi, I have someone's old s7 edge which I'd like to use in place of my A10e lol, it still has their password on it tho. The screen seems to have some really weird issues, if I power it on using the home button or power button half the time the screen will be extremely dim/green and half of it will flicker. It looks and works perfectly fine the rest of the time though. I got it to the "recovery booting" screen, but the screen just flashes then goes near-black (still slightly glowing, doesn't turn off) then boots normally about a minute later.
I've tried around 40 times and can't get it to go into recovery mode. I have no idea what I'm doing but I put it in download mode and tried using Odin to flash it with files I got off sammobile. It didn't even connect at first but did after I installed Kies. Odin said it passed, the phone restarted, then just booted back up to the same lock screen. I then tried installing TWRP onto it, which failed saying it couldn't open the serial(com) port? That's where I am now... does anyone know if there's any way to wipe the phone?
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
jwoegerbauer said:
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
Click to expand...
Click to collapse
I can't get adb to detect the phone, but I flashed it successfully with Odin using the files from this thread:
https://forum.xda-developers.com/sprint-s7-edge/how-to/sm-g935p-stock-odin-firmware-t3582821
It now seems to be stuck in a loop of recovery booting into the download mode screen, and occasionally into a caution screen that says no command.. should I try another rom?
@eggy1
Use SamFirm Tool what allows you to manually search and download the Stock ROM matching your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Categories

Resources