I just bought this tablet and I can`t get the wifi to connect. It keeps toggling the wifi on and off and I can`t connect. I have power cycled and rebooted several times but can`t get it to work. Any suggestions would be helpful.Skip
Read more: Ampe a76 wifi cycles on and off but cant connect? - I just bought this tablet and I can`t get the wifi to connect. It keeps toggling the wifi on and off and I can`t connect. I have power cycled and rebooted several times but can`t get it to work. Any suggestions would be helpful.
Thanks.
Bump
I have the same problem with this tablet,. Hope someone could help us.
@Half Alive Yes, I've read it on some other forums too.. I've tried to download official firmware, it takes for a full day do download it!
But that dose not help, cuz I don't know how to flash the damn thing!!
By the way it worked fine for the first couple of hours...
@Bucika
The same here, Worked just fine in the first two days with some problrms.
Flashing stock rom didn't help to get this problem solved.
You can use live suite to flash it.
Sent from my LT22i using Tapatalk 4 Beta
@Half Alive Do you think that the problem, can be hardware, not the software??
Really don't know,. I hope not.
UP
Sent from my LT22i using Tapatalk 4 Beta
There is a new update on the official device page.
fixed my wifi ,.. now i can turn it on and connect to my router ,.. but sadly there is no internet connection.
http://www.szampe.com/support_down.asp?id=1181
Edit: Flashed the fw with format option.. Now internet is working.
Thank you man, it worked!!
Download link is not working
Half Alive said:
There is a new update on the official device page.
fixed my wifi ,.. now i can turn it on and connect to my router ,.. but sadly there is no internet connection.
Edit: Flashed the fw with format option.. Now internet is working.
Click to expand...
Click to collapse
Dear friend,
Thank you for helping us. unfortunately szampe site is down and the download link is not working. Could you upload the working fw file to any upload site. Appreciate your effort.
Thanks
hany
Related
Sony Ericsson X10 Barnacle wifi tether can't tether with my Galaxy Tab, what should I do, please help
Dont know. I can't even download it from the Market or AppBrain. It says it's not available and that could depend upon my phone (x10A 2.1 generic) or location(USA/AT&T), both of which I have read of other successful Barnacle tethers. Can't find a direct apk downloadable file either. :-(
Any help, please? I need my laptop for pending vacation.
Sent from my X10a using XDA App
agentJBM said:
Dont know. I can't even download it from the Market or AppBrain. It says it's not available and that could depend upon my phone (x10A 2.1 generic) or location(USA/AT&T), both of which I have read of other successful Barnacle tethers. Can't find a direct apk downloadable file either. :-(
Any help, please? I need my laptop for pending vacation.
Sent from my X10a using XDA App
Click to expand...
Click to collapse
It depends on location as AT&T have blocked it. Use the attached app called Market access to "trick" your phone into thinking that it is not on the AT&T network. Choose from the listed operators (I used T-Mobile USA) to download it. Make sure you back up your SIM value. Enjoy!
I'll give it a shot. Once again, Batman appears and saves the day.
Edit: Worked like a charm. What other tricks you got hidden in the batbelt? Questions...I thought unbranded meant I was free from AT&T. Does that mean the market is really ATT Market? What carrier is the most open? Before I try tethering for my first time.. Will tether work with AT&T APN, and is there a thread I will need to setup Windows7?
Edit2: Nevermind...my pc is now tethered. ))))
I'd click the thanks button but don't know how from my phone.
Sent from my X10a using XDA App
agentJBM said:
I'll give it a shot. Once again, Batman appears and saves the day.
Edit: Worked like a charm. What other tricks you got hidden in the batbelt? Questions...I thought unbranded meant I was free from AT&T. Does that mean the market is really ATT Market? What carrier is the most open? Before I try tethering for my first time.. Will tether work with AT&T APN, and is there a thread I will need to setup Windows7?
Edit2: Nevermind...my pc is now tethered. ))))
I'd click the thanks button but don't know how from my phone.
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Glad you figured it out, I was sleeping in the batcave!
As for the market, it depends on the SIM card you insert. The phone (Market) detects your carrier and hides any apps not allowed by your carrier/country. I am not sure what carrier are most open but, whenever you don't find what you are looking for just change the SIM value.
Finally, you can hit the Thank You button when you are back on your PC!
problem tethering
I installed barnacle via the side app loader found on this site... worked like a charm. I configured barnacle settings per previous postings from the forums on XDA. However it says my connection is excellent and my computer is communicating with my phone but i can get online. please help
I am having the same problem as the OP. I have two x10s in which one has cm7.0 but it can't connect to my barnacle wifi from my other phone. My girl's iPhone 4 connects just fine though. Wondering if there is some kind of fix to resolve this issue.
Sent from my X10 using XDA Premium App
kato2010 said:
I installed barnacle via the side app loader found on this site... worked like a charm. I configured barnacle settings per previous postings from the forums on XDA. However it says my connection is excellent and my computer is communicating with my phone but i can get online. please help
Click to expand...
Click to collapse
Since the 2.1 update you actually don't have to adjust any of the settings to make it work. Reset to default if you can. You should be fine.
Sent from my X10 using XDA Premium App
First off, thank you for your response. I unfortunately am still on 1.6 firmware. I have downloaded Bi4nary flash tool and the generic 2.1 firmware however the flash tool always has a problem loading files and I cant figure out how to get to 2.1. (yes I have AT&T those bastards)
As far as my barnacle issue I have the lan set to athwlan0, i tried changing my DNS to 8.8.8.8 and Also have run the cmd and manually changed the netsh interface ipv4 set subinterface "Wireless Network Connection" mtu=1250 store=persistent.
My computer recognizes my phone and says connected there is even data being sent and received but I can not browse or even get google to load.
Thank you for taking the time to read this and respond, all help is greatly appreciated.
Help
Now it will connect and show internet access for a brief moment then why a page trys to load or if i ping the connection or run ipconfig it loses access. I think the problem lies in the setting of my laptop, I just dont know what to do.
Thank you to all who comment on this.
It seems to work for a short while and hten stops working. If I reconnect it works again for a short while.
oh i wish someone told me this.........
since you cannot get barnacle from market on ATT, download from vendor directly!
don't do that crazy workaround.
http://szym.net/apk/barnacle_latest.apk
!!!!!
kato2010 said:
First off, thank you for your response. I unfortunately am still on 1.6 firmware. I have downloaded Bi4nary flash tool and the generic 2.1 firmware however the flash tool always has a problem loading files and I cant figure out how to get to 2.1. (yes I have AT&T those bastards)
As far as my barnacle issue I have the lan set to athwlan0, i tried changing my DNS to 8.8.8.8 and Also have run the cmd and manually changed the netsh interface ipv4 set subinterface "Wireless Network Connection" mtu=1250 store=persistent.
My computer recognizes my phone and says connected there is even data being sent and received but I can not browse or even get google to load.
Thank you for taking the time to read this and respond, all help is greatly appreciated.
Click to expand...
Click to collapse
If you want get to 2.1 download the first generic 2.1 update. Also, make sure you have PC companion on your computer, try to do an update with it first (you don't have to do the update if there is one, just junk), it will install the necessary drivers on your computer to use Flash Tool.
@Prodeje79 - Awesome direct link for barnacle. Wish this was available for me back in the day!
I have PC companion downloaded and it says all software up to date, but still on 1.6. Do I need 2.1 to run adobe flash player, and barnacle. My phone is rooted by the flash tool no problem, i have SU permission but barnacle wont work. It even shows little amounts of data being sent and received but no connection to the internet. I tried the flash tool again and it says error loading data. I have the firmware downloaded.
I am a little all over the place in this post, sorry i'm a little frustrated.
I am really trying to find a way to use barnacle and adobe flash on 1.6
if flashing to 2.1 is the first step ill focus on that.
thanks
kato2010 said:
I have PC companion downloaded and it says all software up to date, but still on 1.6. Do I need 2.1 to run adobe flash player, and barnacle. My phone is rooted by the flash tool no problem, i have SU permission but barnacle wont work. It even shows little amounts of data being sent and received but no connection to the internet. I tried the flash tool again and it says error loading data. I have the firmware downloaded.
I am a little all over the place in this post, sorry i'm a little frustrated.
I am really trying to find a way to use barnacle and adobe flash on 1.6
if flashing to 2.1 is the first step ill focus on that.
thanks
Click to expand...
Click to collapse
I can assure you that flashing 2.1 on an AT&T phone should not be a problem. It must be something you are missing. You keep saying that you have the firmware downloaded, but you don't say what you downloaded and what you did with the firmware. You need to download the X10a generic 2.1.A.0.435 ftf file, and you need WinRar to unzip or extract the ftf file from the download. Then put the ftf file in the firmware folder inside the Flash Tool folder.
Here's a good link for what you need...(except WinRar, search google)
http://forum.xda-developers.com/showthread.php?t=920746
thank you. I already had winrar downloaded, and I downloaded the rtf file and put in the firm folder as directed, I will follow the link and try once more. I finally got barnacle wifi to work and downloaded an app called open home 6 from the market that gives me 5 home screens and some other cool features but i'm still on 1.6. Will upgrading be mess with barnacle.
Another question is although I am able to browse just fine, every time I attempt to download a torrent file via utorrent I get all these error messages and connection stops working.
Can you some how connect your PS3 using barnacle, although PS3 can not see adhoc connections?
My final question is as about adobe flash player and xperia x10a running 1.6... where do i get it, is there any way to run flash.
Thank you to everyone...
kato2010 said:
thank you. I already had winrar downloaded, and I downloaded the rtf file and put in the firm folder as directed, I will follow the link and try once more. I finally got barnacle wifi to work and downloaded an app called open home 6 from the market that gives me 5 home screens and some other cool features but i'm still on 1.6. Will upgrading be mess with barnacle.
Another question is although I am able to browse just fine, every time I attempt to download a torrent file via utorrent I get all these error messages and connection stops working.
Can you some how connect your PS3 using barnacle, although PS3 can not see adhoc connections?
My final question is as about adobe flash player and xperia x10a running 1.6... where do i get it, is there any way to run flash.
Thank you to everyone...
Click to expand...
Click to collapse
Let me know if you are still having problems flashing 2.1. Actually, check your PM box. I helped someone else the other day with detailed step by step instructions for updating to 2.1, which I will try and forward to you.
If you want flash to work, you have to go up to 2.2 Froyo, but you'll have to install xRecovery with the flash tool to install the ROM. I think you have to be on 2.1 successfully in order to install xRecovery, but I am not sure. xRecovery allows you to download ROMs directly to your sdcard/phone and install them from the recovery menu rather than using the flash tool. Also, I think there is another browser that has flash for 2.1. Try maybe dolphin or skyfire.
Below is the link to FreeX10 beta 4 2.2 custom ROM, which I am using. It's vanilla Android. You'll lose some camera functionality, but there's a new camcorder fix that you'll also need to flash with xRecovery as well. You will need barnacle as well, as native wifi teathering has not been implemented.
2.2 FreeX10 for xRecovery.....
http://forum.xda-developers.com/showthread.php?t=900441
I had download official FW from Joyplay site. And i had did:
"Turn off the product, connect the computer with USB Cable, Please pressing the Power and the home key at the same time, then the computer will come out ” discover the new software”. After installing, will operate and check the capacity of the Flash automatically."
And folowing all steps like they say to update with his tool new firmware.
And its all good till this:
img607.imageshack.us/img607/2766/clipboard01wq.jpg
Now my Joyplus M778 (resistive) is out off use and when i turn his on this massage appears:
The Device Enter PWND Mode
Please Connect USB To PC or Reset The Device
Waiting.........
Where I can download some other ROM and IMG, i had found some topic on this forum but i dont see where I can download ROM and IMG. This is my first Android toy.
Thank you
Did you try to redownload the fw file?
Or is there a possibility on the site to download other fw version?
Sent from MIUI powered phone
Hey, I did try 4 times download new FW. Server is very BAD. Download speed is 20kb/sec.
I cant found any other source for other FW.
p.s. im from croatia too. Vukovar in da house
Andy_Boy said:
Hey, I did try 4 times download new FW. Server is very BAD. Download speed is 20kb/sec.
I cant found any other source for other FW.
p.s. im from croatia too. Vukovar in da house
Click to expand...
Click to collapse
Saw you in whr forum, so I decided to try helping out. Lets see if someone else will come by and try to help. Now your pad is dead, right?
Sent from MIUI powered phone
Check this out, your tablet is also mentioned there. Do at own risk:
http://forum.xda-developers.com/showthread.php?t=1101094
Sent from MIUI powered phone
Problem solved with early downloaded .rom and .img when Joyplus servers was fast. Will upload soon files for all
Andy_Boy said:
Problem solved with early downloaded .rom and .img when Joyplus servers was fast. Will upload soon files for all
Click to expand...
Click to collapse
Glad you solved it!
Sent from MIUI powered phone
Andy_Boy said:
Problem solved with early downloaded .rom and .img when Joyplus servers was fast. Will upload soon files for all
Click to expand...
Click to collapse
Could you upload the files somewhere for the rest of us, since the original JoyPlus servers seem to be down..
Thanks
Hi,
I have a UK Sony Xperia Tab Z, WiFi only 32G, it was running 4.1.2 stock with root. After a very long wait of sitting on the fence because of the loss of Tab UI (now sorted with phab7), I finally plucked up the courage to update my Tab Z to the latest Jelly Bean 4.3, using my MAC I ran Sony Bridge, it detected my device and offered to do the update. The whole update downloaded ok but it failed to install with an error about the update engine.
My worse nightmare ...... I'm not that familiar with advanced Android OS issues so please forgive my ignorance. first I tried the update again - multiple times in fact using different USB ports but always the same error. So then I tried running the Sony Update Service under Windows, It found the device and downloaded the update again but again it failed to install the up date (I tried both install options - SW Update only / Data Reset and Update) - I followed the on screen instructions correctly but always the same problem, again I tried different ports.
Starting to panic now ....
Looking through these forums and others for help ....
I've tried holding down the PWR & VOL_UP button for 10 seconds, and letting go, I tried it and then released the PWR button after 10 secs but keep VOL_UP held down, but no matter what i do it wont start up. Some times the SONY logo appears then fades to black after a few seconds....
I really don't understand what could have gone wrong, the device was working fine and the battery was 100% charged. I've tried the button combos with it in and out of the dock and connected by USB but still same result.
I cant believe that something that should work WITHOUT-FAIL does not work, I've always been an IOS/MAC man and the Sony Tab Z has been my one and only Android Device, I like the device for its design and lightness but this sort of catastrophic failure has been the thing thats aways put me off Android, it just should not happen - sure IOS sometimes can get corrupted but you can just about always get out of the problem in DSM mode, is there such a mode with Android & Xperia TAB Z. Can anybody help ?
Update: If I now put the Tab in the Charging Cradle, it seems to be stuck in a loop, first the charge led is orange, then after a few seconds it turns red and the backlight switches on, the SONY logo appears for a few seconds then it looks like it resets, the backlight turns off and after a few seconds it repeats the sequence ... continuously ?
Thanks in Advance
Jay
Try to run sony update service again after some time
nick2crete said:
Download sus ,install it and follow the procedure ,good luck!
Click to expand...
Click to collapse
Thanks for the tim but i already tried SUS as i explained -:
So then I tried running the Sony Update Service under Windows, It found the device and downloaded the update again but again it failed to install the up date (I tried both install options - SW Update only / Data Reset and Update) - I followed the on screen instructions correctly but always the same problem, again I tried different
Click to expand...
Click to collapse
ports.
Cheers
Jay
jay.monkey said:
Thanks for the tim but i already tried SUS as i explained -:
ports.
Cheers
Jay
Click to expand...
Click to collapse
Sorry i saw it after ,ive edited ,leave it for some time and try again ,its very hard to brick xperia devices ,try again
nick2crete said:
Sorry i saw it after ,ive edited ,leave it for some time and try again ,its very hard to brick xperia devices ,try again
Click to expand...
Click to collapse
Thanks for your advice.
I tried SUS again and this time it started to install but the progress bar stopped around 30% and i got the same message, so i tried again and it bombed out after around the same amount of time so i swapped the USB cable for the one it came with (normaly used to connect the changing cradle) and it worked......Phew was really starting to think the thing was bricked. I guess this proves that all USB cables are not equal ?, strange though as i've used the same cable for a long time now with loads of other devices (camera, kindle, SD reader, label printer ..etc) and have not had any issues but it worked soon as I changed the cable .... maybe Sony cable is better screened as it is a bit thicker than the other.
Everyday a School day ....
So now I have got 4.3 stock running what is best method to get root back ?
Cheers
Jay
jay.monkey said:
Thanks for your advice.
I tried SUS again and this time it started to install but the progress bar stopped around 30% and i got the same message, so i tried again and it bombed out after around the same amount of time so i swapped the USB cable for the one it came with (normaly used to connect the changing cradle) and it worked......Phew was really starting to think the thing was bricked. I guess this proves that all USB cables are not equal ?, strange though as i've used the same cable for a long time now with loads of other devices (camera, kindle, SD reader, label printer ..etc) and have not had any issues but it worked soon as I changed the cable .... maybe Sony cable is better screened as it is a bit thicker than the other.
Everyday a School day ....
So now I have got 4.3 stock running what is best method to get root back ?
Cheers
Jay
Click to expand...
Click to collapse
Glad to read that
check this out
http://forum.xda-developers.com/showthread.php?t=2588442
find the files for your device and follow the procedure if the guide confuses you look this from XZ but dont mess the files
http://forum.xda-developers.com/xperia-z/development?nocache=1&z=6559581532359532
Thank you for the link but I dont understand why I need to reflash?
Is there not a direct way to gain root?
To get root on 4.2.2 I just had to run a script and reboot
Ive read throgh those instructions and it looks like I have to install unlocked bootloader and then flash modified firmware
I thought that if boot loader is unlocked some of the Sony features no longer work?
Is there no way to gain root on stock 4.3 with locked BL?
Cheers Jay
Sent from my SGP312 using XDA Premium HD app
I am like u. I am on 4.3 and want root I have the ftf files of 4.2.2 on my pc what I am affraid of is: if I reflashed the 4.2.2 again I will lose my apps and data or everything will remain unchanged?
Sent from my SGP311 using xda app-developers app
Miro24h said:
I am like u. I am on 4.3 and want root I have the ftf files of 4.2.2 on my pc what I am affraid of is: if I reflashed the 4.2.2 again I will lose my apps and data or everything will remain unchanged?
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
I recommend this thread to you guys it worked for me (sgp311)...
Make sure to back up all your apps and data before doing this...
http://forum.xda-developers.com/showthread.php?t=2588442
4.3 Root ?
donedos said:
I recommend this thread to you guys it worked for me (sgp311)...
Make sure to back up all your apps and data before doing this...
http://forum.xda-developers.com/showthread.php?t=2588442
Click to expand...
Click to collapse
So No way of applying Root to locked 4.3 then ?
Jay
jay.monkey said:
So No way of applying Root to locked 4.3 then ?
Jay
Click to expand...
Click to collapse
No root exploit for 4.3 yet but the method mentioned previously worked fine for me on a locked BL.
Sent from my C6603 using xda app-developers app
Hi newbie here . I have a problem on my lenovo p780 8gb 119 rom (bootloop). I already flash it via flash tool... Now, my problem is i cant turn it on, i can only turn it on once i press and hold the power vol+ vol- and choose restart and then i can use it for a while but if i plug in the usb cable, the phone suddenly turns off and the process goes back again...
Hope you all guys out there can help me. tia
Note: i can only turn it on(recovery) with the help of usb cable/charger.
Already updated to stock rom to kitkat and still the same problem.
plok08 said:
Hi newbie here . I have a problem on my lenovo p780 8gb 119 rom (bootloop). I already flash it via flash tool... Now, my problem is i cant turn it on, i can only turn it on once i press and hold the power vol+ vol- and choose restart and then i can use it for a while but if i plug in the usb cable, the phone suddenly turns off and the process goes back again...
Hope you all guys out there can help me. tia
Note: i can only turn it on(recovery) with the help of usb cable/charger.
Already updated to stock rom to kitkat and still the same problem.
Click to expand...
Click to collapse
Hi. Let me see... You have the Lenovo P780 SPEED edition. This means that your phone after 04.2014. You need to flash your phone with the new preloader.
Look on your phone box, on the back of the box and read there.
Sooo.. Now because of this wrong preloader, your PC cannot detect your phone.
Now to reflash your phone you do all the things to prepare flash, press flash button,connect the phone, and now come the tricky part:
- open the back case of your phone and press small red button for 20 secconds. Not optional. More yes, less no.
Try this and tell me what happent.
Sent from my Lenovo P780
hi. my pc can detect my phone... i already install all the necessary drivers, the only problem is that i can only do download and format + download. Every time i choose firmware upgrade then click download on v5 of flash tool, the response is unrecognized rom. but in flash tool v3 error 4001 da download failed. regarding the phone box, i dont know where it is... its been a long time.. maybe they already trash it... is it possible for you to do team viewer? Can you also send me a link for the preloader?
Thanks
plok08 said:
hi. my pc can detect my phone... i already install all the necessary drivers, the only problem is that i can only do download and format + download. Every time i choose firmware upgrade then click download on v5 of flash tool, the response is unrecognized rom. but in flash tool v3 error 4001 da download failed. regarding the phone box, i dont know where it is... its been a long time.. maybe they already trash it... is it possible for you to do team viewer? Can you also send me a link for the preloader?
Thanks
Click to expand...
Click to collapse
Hi. Today i am not home.
Ill contact you tomorow, Monday 23.11.2015. Today i am in another town. Precious PC is home .
I am sory for the delay.
Please dont try anything till i contact you.
I dont want you to broke something more
Sent from my Lenovo P780
sure.. no worries..
Hi.. any news? sorry for bugging you too much...
plok08 said:
Hi.. any news? sorry for bugging you too much...
Click to expand...
Click to collapse
In 5 hours i am home. I will contact you then...
Sent from my Lenovo P780
sure no worries...
if possible for fast q/a u can add me on skype.
skype id: plok08
thanks
stympy said:
In 5 hours i am home. I will contact you then...
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hi Stympy,
I would also require some assistance, please can you pm me your skype id or any available id to ping you?
many thanks!
abhishek.banerjee said:
Hi Stympy,
I would also require some assistance, please can you pm me your skype id or any available id to ping you?
many thanks!
Click to expand...
Click to collapse
PM me on 6 hours from this message. I think at that hour i will be home to assist you.
stympy said:
PM me on 6 hours from this message. I think at that hour i will be home to assist you.
Click to expand...
Click to collapse
Thank you and done
Sent from my LG-H950 using Tapatalk
abhishek.banerjee said:
Thank you and done
Sent from my LG-H950 using Tapatalk
Click to expand...
Click to collapse
Unexpected event at work...
I have responded to you in private! Good Luck!
Recently I flash my MiPad to LineageOS 14.1 lastest version.
My Wifi is dead, unable to turn on.
The MAC address is showing 02:00:00:00:00:00
When i try to revert the roms, the wifi is still dead.
and did some googling... one of the possibility is hw faulty.
Did anyone encounter this issue before, I hope there is a solution for this...
dynomist said:
Recently I flash my MiPad to LineageOS 14.1 lastest version.
My Wifi is dead, unable to turn on.
The MAC address is showing 02:00:00:00:00:00
When i try to revert the roms, the wifi is still dead.
and did some googling... one of the possibility is hw faulty.
Did anyone encounter this issue before, I hope there is a solution for this...
Click to expand...
Click to collapse
Try to flash fastboot miui ROM it may work ;_;
MAC adress 02:00:00:00:00
AbhaYsinGH007 said:
Try to flash fastboot miui ROM it may work ;_;
Click to expand...
Click to collapse
Did you find a solutiion for your issue, I have the same == MAC 02:00:00:00:00
Thks for your support
I am running cDroid and SmokeR21.5 kernel. Yesterday I noticed that after a restart Wifi did not turn on nor did connect to anywhere and MAC address was that 02:00:...
I did a shutdown to the tablet and then turned it back on and wifi started working and MAC address was something rational this time.
linux89 said:
Did you find a solutiion for your issue, I have the same == MAC 02:00:00:00:00
Thks for your support
Click to expand...
Click to collapse
after u fully poweroff, do u hv battery drain issue...?
Hey I still have that WiFi mac address problem, did anyone find a proper solution for it already?
Guy.brush said:
Hey I still have that WiFi mac address problem, did anyone find a proper solution for it already?
Click to expand...
Click to collapse
Hey guys I have the same issue, the MAC ADress ist stuck at 02:00:00:00:00
I checked via terminal emulator the Mac adress and it comes out a different one! I could even change it there. but nothing helped I couldn't switch Wifi ON. So I will try going back on MIUI and see if it's working. If it is working I'll let you know
Same issue here also
I am also having the same issue.after tried lineage os wifi is not switching on.mac adress unavailable.tried everything like reset.fastboot stock rom. Recovery stock rom.another custom roms.but no use.if anyone has solution plz help me
sainadh said:
Same issue here also
I am also having the same issue.after tried lineage os wifi is not switching on.mac adress unavailable.tried everything like reset.fastboot stock rom. Recovery stock rom.another custom roms.but no use.if anyone has solution plz help me
Click to expand...
Click to collapse
Any Solution you arrived? I am also having same issue.