Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0 or TWRP v2.6.3.0 or CWM v6.0.4.0 (Touch Based) or CWM v6.0.4.0
5. MobileUncle MTK Tools v2.9.8
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
7. Check with Root Checker, if your device is rooted or not.
8. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
9. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
10. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
11. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
adi_sat123 said:
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
Click to expand...
Click to collapse
I have first tried it then I have posted this tutorial, you can try it by yourself.
Works 100% for me on my Mobistel Cynus T5..Thanks...
working like a champ thanks:good:
nice_guy75 said:
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0
5. MobileUncle MTK Tools v2.9.3
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Reboot your Device.
5. Check with Root Checker, if your device is rooted or not.
6. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
7. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
8. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
9. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Note: It will install SuperSU v1.34 but v1.51 is also released, so you can upgrade your SuperSU by flashing the zip via custom recovery.
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
Click to expand...
Click to collapse
Will this trick work on Canvas 2 too..??
Thank you.....
It works!!!!
Thank you OP....
abhishekjain.ims said:
Will this trick work on Canvas 2 too..??
Click to expand...
Click to collapse
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
nice_guy75 said:
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
Click to expand...
Click to collapse
Ok...it did..1 of my friend successfully completed this trick..thanks :victory:
niceaf5 said:
I have first tried it then I have posted this tutorial, you can try it by yourself.
Click to expand...
Click to collapse
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Sunny37886 said:
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Click to expand...
Click to collapse
Tell me what points are written on it?
nice_guy75 said:
Tell me what points are written on it?
Click to expand...
Click to collapse
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Sunny37886 said:
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Click to expand...
Click to collapse
Ok, got it you are rooted and flashed with CWM.
cam is not working
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
sunny041 said:
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
Click to expand...
Click to collapse
Everything is explained in the tutorial then also you are unable to unroot?
nice_guy75 said:
Everything is explained in the tutorial then also you are unable to unroot?
Click to expand...
Click to collapse
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
sunny041 said:
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
Click to expand...
Click to collapse
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
nice_guy75 said:
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
Click to expand...
Click to collapse
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
No bugs works like a charm finished rooting and installing cwm in 5 Minutes amazing!!
Sent from my Micromax A116 using xda premium
sunny041 said:
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
Click to expand...
Click to collapse
I would suggest you to go to Service centre only.
Related
Using Flash Tools to Flash TWRP Recovery to A116
Requirements:
TWRP Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps :
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Downloads :
TWRP Rrecovery :
http://d-h.st/IsY
Kernel Sources :
http://yadi.sk/d/fmIOi_ee6ADpi
MT6589 Scatter File :
https://www.dropbox.com/s/p0oc0769t5igt8s/MT6589_Android_scatter_emmc.txt
SP Flsh tools:
http://www.mediafire.com/?7ccl2tw67tklxdk
Drivers:
http://www.mediafire.com/download.php?nv96xclhjmaiclu
64bit drivers:
http://forum.xda-developers.com/showthread.php?t=2206421
TWRP is tested working.
Changelog :
[23/05/2013]
1. TWRP Updated to 2.5.0.0
2. Auto Root Fixed
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Vijay
Press Thanks button if I helped!!
Great !!
lol. Installed the newer version of CWM just 5 minutes back. Installing TWRP now. lol. Wish i had seen this post before.
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Abhiroxx said:
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
+1 for this..
Sent from my Micromax A116 using xda app-developers app
reboot problem
hi
i seem to be having some problem rebooting system does it take some time to reboot i waited for some time it did not reboot and then i pulled out the battery and booted the phone kindly advise on the same
thanks in advance:good::laugh:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
kumar abhishek said:
Using Flash Tools to Flash TWRP Recovery to A116
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
TWRP is tested working.
[/COLOR]
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Manoj Nair
Uploading- Kushal Gupta
Press Thanks button if I helped!!
Click to expand...
Click to collapse
peekeje said:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Click to expand...
Click to collapse
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
kumar abhishek said:
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
Click to expand...
Click to collapse
Sorry to quote full.
I tried also the CWM procedure... and flashed both the SU and BIn files. and after reboot, its there in the app drawer. And when i open the SU, and try to update binary also, it fails.
Also, root checker says, Not root access.
can we use mobile uncle tools to flash this......
mohsin2cool said:
can we use mobile uncle tools to flash this......
Click to expand...
Click to collapse
Nope you need SP Flash Tool. Mobile uncle has some problems with mt6589 chipset
Sent from my C6502 using xda premium
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
eagledipesh said:
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
Click to expand...
Click to collapse
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
kumar abhishek said:
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
Ha ha ha, cool then, i thought its a new thread, what is the major difference if i upgrade?
@kumar abhishek
how were you able to keep the size of this twrp recovery to just within 6mb?.
from what i have checked on the porting tool of yuweng, twrp 2.5.0.0 requires the recovery partition to be adjusted to 7mb?
i am trying to port twrp for the a919i which is similar to the a116 hd.
tia
cant see SD
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
haree said:
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
Click to expand...
Click to collapse
Problem is due to sd swap only
Sent from my C6502 using xda premium
kumar abhishek said:
Problem is due to sd swap only
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
hi
u got me wrong i did the swap after initaly flashing and not seeing the external sd
and the SWAP is working fine now i have 32GB internal storage
thanks...
Upgraded from CWM to TWRP using Mobileuncle tools successfully... thanx
Rooting MediaTek MTK6589 phones without Flash Tools:-
EDIT: Just use Framaroot. Simple. No PC required. http://forum.xda-developers.com/showthread.php?t=2130276. Just install the App and use one of the exploits.
*You can ignore this* OLD METHOD: (use this if you have a lot of time to waste )
Get "Motochopper, developed by djrbliss" for rooting Motorola devices. It works on most devices running Jelly bean 4.1 and above.
Original post (requires logging in) / Thread on XDA / # Alternate Download (Mirror)#
Here's what you need before you Root.
1. Any Phone with MediaTek MTK6589 Processor and Jelly Bean 4.1+
2. Drivers for ADB (connects the pc with the phone through USB Debugging) - there are many sources to get these drivers. If you're running the stock micromax firmware, it's found onboard when you connect the usb. For others running custom firmware, you could download from moulnisky.com. Even windows update might automatically install these drivers for you, but it's time consuming. After you've installed this, proceed to the next step to find out if you've established a proper connection between phone and pc.
3. Connect the phone to PC via USB cable and run the motochopper (run.bat file). press ok. then connect the phone to pc and enable USB debugging from the developer tools. Now the tool should push the exploit and root your phone. if no device is detected, go back to step two and install the correct drivers. if it's done, you're a superuser.
Note: In Android 4.2, Developer Tools will be hidden by default. You'll have to enable it first. For that, Go to Settings > About Phone > Build Number > Tap 7 Times.
Wanna Unroot and go back to Normal user?
SuperSu > Settings > Full Cleanup and Manually Reboot.
Installing Custom Recovery:-
This is a Must-if you have a rooted phone. Install a custom recovery before you start changing any system files. this will come in handy in case you mess up your phone and stuck in bootloop. It is commonly used for installing unofficial firmwares and also for backing up your perfectly working firmware.
To install a Custom Recovery, follow these steps. ( Root permissions needed )
1. Root the phone (refer above).
2. Download Mobileuncle MTK Tools from the Play Store.
. Download a Custom Recovery of your choice and place it on your external SD card without any folders. the recovery image file must have the word recovery in it for the app to detect it. i.e twrprecovery,recovery-twrp,etc.. so whatever sources you get the recovery image from, rename it accordingly.
Clockworkmod and TWRP are the most commonly used custom recoveries. It's up to you to decide which one you're installing. TWRP vs Clockworkmod: Which custom recovery is the best?
TWRP Custom Recovery
Clockworkmod Custom Recovery
3. Now run Mobileuncle Tool. Recovery Update > You'll find the recovery image there. Select and confirm to install. Done.
More info: Backups taken with clockworkmod don't work with twrp. so choose your family wisely.
Re-installing the Stock Recovery:-
If you want to revert to the Stock Recovery at some point due to some reason, HERE is the stock recovery taken from the stock firmware. You can flash it through Mobileuncle just like you flashed custom recovery.
Launching the Phone in Recovery mode:-
Switch off the Phone and wait till it's completely off. Pressing Volume Up + Power will enter the Recovery mode.
Factory Restore:-
Wanna Upgrade to a Newer version of Android ? or Have you just messed up your Phone ? Worry-Not. Here's the solution for all your problems. As the saying goes " A MediaTek Phone can never be Hard-bricked ". It can only be Soft-bricked and then it's easy to resurrect it back from the Dead with SmartPhone Flash Tool.
Here's what you need:
1. Micromax Micromax Canvas HD (I'm not sure if this firmware will work with any variants of this Device.)
2. The Latest Firmware for Micromax Canvas HD: S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER (Android 4.2.1 Jelly Bean, Released on 18-October-2013)
3. Download the latest version of Smart Phone Flash Tools: Download v3.1312.0.139
4. MediaTek PreLoader USB VCOM Port Drivers - (Download) - This is the most important part. If you don't install these drivers, SP Flash Tools will not work.
Note: these aren't the same drivers that comes with the Phone or those Unsigned Drivers provided by many sources. These are signed drivers and works with all versions of Windows (includes 7,8 x64 versions)
How to install: Don't download the first file (it's just an installer). Get the two other files which are the Drivers. Keep them in a folder and extract them. You will have two .inf files. Right click on both of them and install. Simple.
5. After downloading all the required files and installing the drivers, power off your phone completely and remove the USB cable. Now remove the battery from the phone.
6. Extract the zip file containing the micromax firmware to some folder and then run SP Flash Tools. Now select the Scatter-Loading File which is inside the extracted folder named as "MT6589_Android_scatter_emmc". Press Download and connect the USB cable to the phone (without battery). It takes around two minutes to complete. Removing it mid-way will only mess-up the phone. After a Green circle is shown on screen, you can remove the cable and turn on the phone. That's all.
Note: If you're upgrading from Android 4.1 to 4.2, for the first time, You might enter an app called TP Upgrade that will run on the first boot. It's a Nice app. It upgrades your TouchPad drivers to the latest version and will ask for confirmation.but the thing is "DON'T TOUCH ANYTHING ON YOUR SCREEN WHILE IT'S THERE (NOT EVEN THE OK BUTTON)". It will start by it's own and completes in around 5 minutes approximately. If you accidentally touch the screen, your TouchPad will stop working. Now, Don't Panic. Welcome to the League. Now remove the battery from the phone and restart. You should see the same TP Upgrade coming up again. Have some snacks and don't do what you did last time. It'll be fine.
Credits:-
djrbliss for motochopper
suhas.holla for the clockworkmod recovery
kumar abhishek for the twrp recovery port.
www.moulnisky.com
Don't forget to hit that thank button.
Its works
salaigeethan666 said:
I just found out the simplest method to root the Micromax A116 Canvas HD.
This method is not yet popular among many Canvas HD users. But this one works without the need for any custom recovery. So you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I tested this method and it works flawlessly.
Here is the link to the site that provided it.
(add http here)droidchina.com/forum/Thread-Rooting-MT6589-HDC-Galaxy-Android
(I can't post outside links because I'm new)
Click to expand...
Click to collapse
This worksss....man....thank you.So easy.Installed drivers connected the phone and ran the bat file and done.Even checked via root checker.
Its rooted but u can access the recovery options
Sent from my Micromax A116 using Tapatalk 2
shub_hi said:
Its rooted but u can access the recovery options
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
Yea. I'm trying to install Clockworkmod too.
I tried pushing the recovery through Adb. but it failed.
i'll have to find some other way to install.
salaigeethan666 said:
Yea. I'm trying to install Clockworkmod too.
I tried pushing the recovery through Adb. but it failed too.
i'll have to find some other way to install.
Click to expand...
Click to collapse
Yah.....need to inst CWM recovery as we cant access the stock recovery
this is what I get when I try to install in through terminal emulator.
Code:
>su
>flash_image recovery /sdcard/recovery.img
>error scanning partitions: Invalid argument
Even the video in YouTube uploaded by cursed4eva.com....that process don't work too.
Sent from my Micromax A116 using Tapatalk 2
salaigeethan666 said:
I just found out the simplest method to root the Micromax A116 Canvas HD.
This method is not yet popular among many Canvas HD users. But this one works without the need for any custom recovery. So you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I tested this method and it works flawlessly.
Here is the link to the site that provided it.
(add http here)droidchina.com/forum/Thread-Rooting-MT6589-HDC-Galaxy-Android
(I can't post outside links because I'm new)
Click to expand...
Click to collapse
how to unroot it back
How to Unroot?
Mahisasur said:
how to unroot it back
Click to expand...
Click to collapse
SuperSu > Settings > Full Cleanup
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
guys need and conformation from you all....before rooting and installing CWM, i mean to say when u first baut the fone......did you got the access to recovery? I have an peculier prob from the 1st day.....i could enter recovery but could not select any options.just below the recovery i a picture of a green bot is placed with keybord sign and above that bot there is a exclamation mark in a triangle. Please suggest.
Click to expand...
Click to collapse
what if i dont install custom recovery after rooting
salaigeethan666 said:
SuperSu > Settings > Full Cleanup
It works. I ran Root Checker afterwards to confirm it.
Click to expand...
Click to collapse
what if i dont install custom recovery after rooting. is this necessary to install cwm and what it actually does.
i am new to this android rooting thing. but i want to swap storage of my canvas hd to play hd games... please help me.
Re: Micromax Canvas HD A116 [Rooting without a Custom Recovery + Installing Recovery]
shub_hi said:
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
guys need and conformation from you all....before rooting and installing CWM, i mean to say when u first baut the fone......did you got the access to recovery? I have an peculier prob from the 1st day.....i could enter recovery but could not select any options.just below the recovery i a picture of a green bot is placed with keybord sign and above that bot there is a exclamation mark in a triangle. Please suggest.
Click to expand...
Click to collapse
No. I see what you are talking about. The stock recovery will not work in Canvas HD. Everyone has that problem.
Mahisasur said:
what if i dont install custom recovery after rooting. is this necessary to install cwm and what it actually does.
i am new to this android rooting thing. but i want to swap storage of my canvas hd to play hd games... please help me.
Click to expand...
Click to collapse
It's not necessary. You should install it only if you love to flash custom ROMs (Customized Android versions) to your phone. You can flash unofficial android versions to your phone with it. It also allows you to make a backup of your stock ROM which you can't with the stock recovery. You should always make a backup of your stock android to make sure you can always reset your phone back to normal whenever something bad happens (that is if you brick your phone trying to install a ROM).
If you only looking for swapping the memory cards, root is more than enough. Look at this Guide for instructions.
http://forum.xda-developers.com/showthread.php?t=1991583
Thanks i appreciate your help.
Sent from my Micromax A116 using xda app-developers app
Its workssssss
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
The link provided above just worked flawlessly.......awesome....thank you both
Worked like a charm
worked perfectly normal like mentioned. Actually, i had successfully installed CWM, but after installing superuser zip files via CWM my phone got stuck in bootloop mode. Had to restore the stock ROM and then installed CWM again, After that tried your method and it worked. Proud owner if rooted A116 now Thank you for sharing the info!
hd rooted
thanks man its works for me a lot.....
finally my canvas hd rooted yo
i swap memory by this method
Default camera app needed
Can someone please upload the default camera app of Micromax a116?
I think I deleted it accidentally... :crying:
P.s. - Im using stock rom with NO modifications except root and CWM
I deleted the video player app and gallery app, maybe that was bundled with the camera app :-/
thank you
salaigeethan666 said:
Root Micromax Canvas HD A116
(without installing Custom Recovery)
Most Guides talk about using SP Flashing Tools to flash the Custom recovery and then rooting the phone. But Here we root the phone first and then install Custom recovery. This method is much easier. You don't have to install any Custom recovery to root your Canvas HD. Which means, you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I used Motochopper by djrbliss to root my Canvas HD. I didn't face any problem. so it works. Here is the link
http://hdcgalaxy.com/2013/04/root-tutorial-hdc-galaxy-android-mt6589.html
How to Unroot?
SuperSu > Settings > Full Cleanup and Manually Reboot. It will be gone. I tried it and works.
Credits:-
djrbliss for making motochopper - Original link
Install Custom Recovery after rooting
Download "Mobile Uncle Mtk Tools" from the Play Store and use it's Recovery Update feature to install Custom Recovery directly from your mobile. For more details, follow instructions here
Tips and Tricks:-
How to Swap internal and external Memory Card - link
Although your phone is powerful enough to run high definition games, the manufacturer has provided little space to install any such games. Your internal memory of 2Gb storage fills up as soon as you install something like Need for Speed Most wanted. So the first thing you must do after rooting the phone is swapping the memory cards. Insert a 16Gb external memory card and use this trick to transform the external memory card into internal memory. Now you can have six hd games at the same time on your phone
Installing Adobe Flash Player - (Download Apk/View Source)
Hit Thanks if i helped you
Click to expand...
Click to collapse
thanks a million man , was able to root my canvas with this method, with your guidance ofcourse, moborobo installed the necessary drivers, and motochoper worked as a charm....... thanks again man...... cheers
Stuck in stock recovery
Problem i have is the stock recovery sucks i cant enter any option by pressing both keys right context menu + back key simultaneously
nothing happens and the method from cursed4eva works for me does any one know how to select the highlighted option in stock recovery ? because i am stuck
Anyone can help will be very much appreciated.
It is this model = http://www.lelong.com.my/zte-v793-a...alcatel-hidamari-129512382-2014-05-Sale-P.htm
I also have this phone and still looking for a working method to root it. Please share the info if you know. Thank you.
ZTE V793 rooted
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
zte v793
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
1. Can u teach me how to root zte v793 step by step and give also download link?
2. I also have another problem : after update zte v793 my phone keep restarting...
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
Hi
Can you teach us step by step to root zte v793 and the link to download the software you use.
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
edit: I also in need of usb driver for this phone because whenever I switch off phone for Flash tool, my XP laptop always ask for drivers of which I don't have.
Thank you in advance. I'll wait for your files and guidance to do it. :good:
Dear all,
my method ultimately becomes obselete now. to root, you can just use one of these 2 methods:
1. Ishuaji
2. e-root
the supersu included is in chinese, so you might need to flash CWM to change to english supersu.
as for flashing CWM, you can find tutorials using Mobileuncle.
thanks!
First, disclaimer:
WE TAKE NO CREDIT FOR ANY WORK THAT COMES ASSOCIATED WITH THESE BUILDS UNLESS SPECIFIED OTHERWISE. THANKS FOR KEEPING THINGS OPEN!
OFFICIAL DISCLAIMER
PHP Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about this custom CWM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
All the files needed are in this google drive folder:
https://drive.google.com/folderview?id=0BzFjevWXftUyY3RQUlZjZ2s1QjA
Detail of files:
1. zte_mtk6573_drivers_cdc+vcom+adb_v1.1136.0.zip
USB VCOM driver. needed when you want to flash the phone (This is when you strip the battery off the phone and connect it to USB). this driver is unsigned, so for win8 users, pls google how to install unsigned drivers.
2. SP Flash Tool v3.1216.05.7z
Flashing tool. you need this to flash the custom CWM attached.
3. MT6575_Android_scatter.txt
Device-specific memory map. we need this to tell SP flash tool where to put the custom CWM when flashing.
4. ZTE-V793_130615__recovery_130802-123951.img
Custom CWM generated from my phone (ZTE V793) bought from Happy Mobile (DiGi) under SKMM package.
DISCLAIMER: this is generated from my phone's settings and intended only for my phone's usage. I will not be responsible for any damage caused by your act of flashing this file onto your phone.
I successfully generated the file using the tutorial from a russian site
http://forum.china-iphone.ru/viewtopic.php?p=496116#p496116
also an xda tutorial here
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
You can generate your own CWM using tutorials above, but if you agree with the disclaimer, you can use the custom recovery attached. With no warranties, of course.
5. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip
The rooting tool to be installed by our custom CWM to the phone to obtain root
Click to expand...
Click to collapse
Method:
This can be divided into several process:
1. Download all related files
2. Install Driver
3. Flash custom CWM
4. Install Root & Busybox zip file using CWM
Click to expand...
Click to collapse
1. Download all related files
Pretty self explanatory. Download and extract all files.
First, download and install USB Driver:
http://www.mediafire.com/download/f7h1f7i7skggmtg/ZTE+Driver.rar
2. Install Driver
We need 2 drivers to be installed:
- ZTE_Handset_USB_Driver.exe
- JoinMe_for_Android.exe
the Joinme driver is needed when flashing custom CWM. However, it didn't work for me. so I installed zte_mtk6573_drivers_cdc+vcom+adb_v1.1136.0.zip manually. To install it, remove battery from phone, connect to usb. Wait for computer to start searching for drivers, select Browse for drivers and select the vcom drivers downloaded.
3. Flash custom CWM
1. Open Flash_tool.exe from SP Flash Tool v3.1216.05 folder extracted earlier.
2. Click "Scatter-loading". Select "MT6575_Android_scatter.txt" that you downloaded earlier.
View attachment 2159248
3. Click to deselect ALL checkboxes in the list. ONLY TICK RECOVERY.
View attachment 2159266
4. Double click on the word RECOVERY and select "ZTE-V793_130615__recovery_130802-123951.img" downloaded earlier
View attachment 2159267
5. Click Download. A warning will pop up "Not ALL images are correctly loaded blah blah blah". just click Yes.
View attachment 2159283
6. If you see below the application, it will say "Searching" next to NAND. Time to plug in your phone. DON'T FORGET TO REMOVE THE BATTERY BEFORE PLUGGING IN YOUR PHONE.
View attachment 2159284
View attachment 2159285
7. Now you're done flashing, it's time to boot into CWM. Unplug the phone from USB. Put on battery. Press Vol+ & Power Button simultaneously. When ZTE logo appear, RELEASE ALL BUTTON.
8. Let's hope you boot straight into CWM
If you have this, then CONGRATULATIONS! you are now a step away from root!
4. Install Root & Busybox zip file using CWM
1. Copy the "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" onto the root of SD Card on your phone as normally you would (I wouldn't elaborate since this is android 101 knowledge)
2. Boot into Clockworkmod (CWM) recovery. To do this, turn off your phone normally. 5 seconds after the phone vibrates (fully off), press volume up (vol+) and power button. Wait until ZTE logo appears, then release both buttons.
If you do this correctly, you will see "CWM v 5.5.0.4 for ZTE V"
to navigate, use volume up (vol+) & volume down (vol-). to select, use power button.
3. Select "install zip from SD CARD" > "Choose zip from sdcard" > Look for "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". REMEMBER: Navigate using volume button, select using power button.
then, confirm by selecting "Yes - Install Root_Superuser_" and pressing power button.
when completed, go back to main menu and select reboot.
if nothing goes wrong, you will see SuperUser and busybox icon in your App drawer.
UPDATE:
12082013 - finished 4th item - install root & busybox
todo - revise SP Flash tool version
kokokranc said:
4. Install Root & Busybox zip file using CWM
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks
Click to expand...
Click to collapse
Hi kokokranc..appreciate if you could continue
Will Try
kokokranc said:
First, disclaimer:
If you have this, then CONGRATULATIONS! you are now a step away from root!
4. Install Root & Busybox zip file using CWM
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks
Click to expand...
Click to collapse
want to try it after buaka puasa :laugh:
error
got this error
maybe it because my pc just detects then undetects preloader drivers
my phone cannot power after format using spf tools
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Cannot On
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
same here
saifudinbesoot said:
got this error
maybe it because my pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
When the red bar reaches 100% just disconnect and reconnect phone before timeout.
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 02:54 AM ---------- Previous post was at 02:49 AM ----------
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
saifudinbesoot said:
same here
Click to expand...
Click to collapse
Log file from spf tool?
Sent from my GT-I9500 using xda app-developers app
thanks bro
all success after i use latest Flash_tool.exe from SP Flash Tool
it also solve this guy prob bec mine also like him
saifudinbesoot said:
got this error
maybe it because my pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
pls continue to Install Root & Busybox zip file using CWM
sadmanex said:
thanks bro
all success after i use latest Flash_tool.exe from SP Flash Tool
it also solve this guy prob bec mine also like him
pls continue to Install Root & Busybox zip file using CWM
Click to expand...
Click to collapse
do u manage to get into CWM like the last screenshot above?
Sent from my ZTE V793 using xda app-developers app
Error 8038
Please help, my phone is still OK, can ON, but I got this error. I've tried another version of SP Flash Tool but still got the same error..
Root Success
kokokranc said:
First, disclaimer:
WE TAKE NO CREDIT FOR ANY WORK THAT COMES ASSOCIATED WITH THESE BUILDS UNLESS SPECIFIED OTHERWISE. THANKS FOR KEEPING THINGS OPEN!
OFFICIAL DISCLAIMER
PHP Code:
Code:
#include
/*
* Your warranty is now void.
*
.
.
.
.
[COLOR="Red"][B]4. Install Root & Busybox zip file using CWM[/B][/COLOR]
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks[/QUOTE]
Of course you can. Btw, I successfully root my phone using your recovery.img and scatter file. The only thing I need to change is SP Flash Tool. I downloaded new version SP_Flash_Tool_v3.1224.01, because your provided version doesn't work for me.
Anyway, thank you very much for all the files.
Click to expand...
Click to collapse
kokokranc said:
do u manage to get into CWM like the last screenshot above?
Sent from my ZTE V793 using xda app-developers app
Click to expand...
Click to collapse
yes
and can on/start my phone normally
just use new SP_Flash_Tool_v3.1224.01 (download at softpedia)
cannot on phone
some have link to download PRELOADER image?plzzz share...my phone cannot on after flash format...
saifudinbesoot said:
same here
Click to expand...
Click to collapse
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
remove your battery and replace it again, and then turn on. I got the same problem back then and those steps worked for me.
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Worked for me
Thanks
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Mahmoud11111 said:
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Click to expand...
Click to collapse
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
ndm4ompk said:
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Click to expand...
Click to collapse
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
@Elie.G said:
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
Click to expand...
Click to collapse
flash stock rom tar via odine uncheck auto reboot, after flash pull battery and insert it now go stock recovery with press
volume up+home+power key and do factory data rest and cache and now in download mode and do it again..
(only do first not flash twrp 3.0..0.0)
(first u on g531h)
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
Click to expand...
Click to collapse
When i try the 3 step doesnt apeer the twrp recovery, on previous step seem to be all ok.
Thanks millomilky, my english is not good but u explain it very well, thanks again and i appreciate your work,,
Sent from my SM-G900V using XDA Free mobile app
In step 3 1st time apear a slide bar, slide it right to enter twrp,
Sent from my SM-G900V using XDA Free mobile app
ndm4ompk said:
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
Click to expand...
Click to collapse
Unfortunately , this custom kernel is not compatible with my device , my device stucked at boot and said "kernel is not seandroid enforcing"
So i restored my stock kernel again which i backed it up.
Please anyone have any ideas about changing SElinux mode to permissive on this phone SM-G531H don't forget me
I tried selinux mode changer app and terminal emulator but doesn't work for me
Ok i m trying find like u,,
Sent from my SM-G900V using XDA Free mobile app
Is this thread works on AOK2?
Finally, My phone has been rooted now
Now. I just need the touchwiz music player for this device.
Because This device doesn't have the default (music player).
If u have g531h then answer is yes,
Sent from my SM-G900V using XDA Free mobile app
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Zainelabdeen said:
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Click to expand...
Click to collapse
Thanks Zain
Does this method work in the sm-g531h/dl variant?
I ask because i have a problem recently with a recovery for the sm-g316ml/ds. I flash a recovery for the sm-g316ml and it didnt work. thanks in advance
thanks before
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
riefers212 said:
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
This picture might help. Screenshot is taken from G531H that I rooted using this guide.
Rooting on some other devices does not require turning-off FRP lock.
But it's always better to turn-off FRP lock (to check Manufacturer unlock).
Click to expand...
Click to collapse
For NewBie'sHii Today Iam Going To Help All New Users Of Grand 2 SM-G7102,SM-G7105.
BasicIf U Want To Install New Custom Roms Or Any Type Of Custom Rom Then Follow The Steps.
●First You Need A Custom Recovery To Install A Custom Rom Or Any Zip Files
●There Are Many Custom Recovery Available For Grand 2 Both Varients(But I Recommend TWRP).
How To Install Custom Recovery ?●First U Need To Download TWRP Recovery
●The Recovery Should Be In Tar Format(Odin Flashable)
●Then U Need To Download Odin Latest Version(I Added The Files Link Below)
●Then Extract Odin.zip In Desktop And Open Extracted Folder From There
●Now U Need To Access Your Phone Into Download Mode,To Access Download Mode U Need To Press(Volume Down+Home Button+Power Button Together)Then U Will See An Android Icon On Your Screen Press Volume Up Button To Continue,Now Connect Ur Device To Your PC Via An USB Cable.
●Ok Now Last Step Is Open Odin As Administrator By Right Click On Your Mouse.
●Now U Will See That Odin Is Opened And There Are Many Options Like AP,CP,Etc
●Now U Need To Select Ap Option And Find Ur Recovery.tar File Where U Placed It Then Click Start To Start The Installation.(Uncheck Auto Reboot Option If U Are On Stock Rom Means 4.4.2 Kitkat,This Will Bypass install-recovery.sh)
●It Will Take Some Seconds To Complete When U See Pass Message Then Look At Your Phone.
●Now Remove Battery And Reinsert The Battery And Press Volume Up+Home Button+Power Button) To Enter Into Recovery Mode.And U Will See That TWRP Is Written In Your Screen.
Congrats You're Successfully Installed Custom Recovery
How To Install Custom Rom Or Patches ?●First Download The Rom.zip File To Your Internel Storage Or Externel Storage Wherever U Want.
●Then In TWRP Recovery
●Select>Wipe Option Then Tick 4 Options
●Data,Cache,Dalvik-Cache,And System
●Now Install Ur Rom.zip File From Ur Specific Storage Where U Placed The Rom.zip File And Wait For Installation Complete(If There Is No Patch Required For The Rom,Then Follow This Instruction Only)
●And If There Is Any Patch Required To Fix Any Bug Of Any Rom That You're Installing Then All U Need To Do This Just Follow Above Step But Before Start U Select 1 Option Add Zip Files (Which Is Came After U Select Any Zip File),And Select Your Patch Zip For Your Rom,Then Start The Installation.
How To Fix BootLoop On Your Current Rom ?●Bootloop Is An Irritating Bug Of Any Device.
What Is Bootloop ?
●Look You're Using A Rom Such As Stock Or Custom Rom.And U've Powered Off Your Devicr Or U've Selected Restart,And Suddenly U're Saw That You're Phone Is Not Booting Or Stuck At Samsung Galaxy Grand 2 Logo Or In Boot Animation.And Not Booting Or Not Turning Up The Soft Key Lights.
How To Fix Bootloop ?
●If You've Did'nt Flashed Anything Then Select Wipe Dalvik Cache And Cache,After That Reboot Your Phone And Your Phone Will Start Within Some Minutes.
●If U Flashed Something That Is Not Supported By You're Device And U Dont Know What U've Done And U Saw Bootlooping Then Wipe All Partitions
System
Data
Dalvik-Cache
Cache
Then Reflash Your Rom With Patch(If U Remember How To Do This Then Ok Or Otherwise Follow My Step In This Thread Which I've Written Above.
How To Flash A Rom Without Loosing Any Of Your Personal Data Or Apps ?If U Want To Flash A Custom Rom With All Your Personal Data And Apps Then Stay Chilled You're In Right Place.
●First Of All Go To TWRP Recovery Go To Wipe And Select Only System,Cache,Dalvik-Cache Do Not Wipe Data
●Then Flash Your Favourite Custom Rom With Out Loosing Your Apps And Personal Data. :good:
Anirban Ganguly[email protected] Grand 2 duos,Lte(4G) Hit Thanks●If U Need Any Help Then Feel Free To PM Me At Xda.
●More Guides Are Coming Soon.
●Iam Bit Busy In Development,So When I've Free Time I Will Add More.
DownloadsDownloads Link In 3rd Post.
How To Install Boot.img Or Recovery.img Without A Pc ?●First You Will Need To Download Flashify From Play Store
●Open Flashify And Give It A Root Access
●Then Select Flash Img
●Then locate Your Img File Wherever You Placed It And Select Flash
●It Will Automatically Reboot
Thats It For Now More Guides Are Coming Soon
Reserved
DOWNLOADS
●TWRP[ms013g][Grand 2 Duos SM-G7102]
http://forum.xda-developers.com/galaxy-grand-2/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3107535
●Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Anirban Ganguly said:
DOWNLOADS
?TWRP[ms013g][Grand 2 Duos SM-G7102]
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0
?TWRP[ms01lte][Grand 2 LTE SM-G7105]
https://www.dropbox.com/s/8lrh85ps62h2l8l/recovery.tar.md5?dl=0
?Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Click to expand...
Click to collapse
Bro Direct links of others work not allowed in xda... better give their thread link...so that no one will report to mod
....
Ok
Please, how do I flash recovery for Samsung Grand 2 without pc?
Billygent said:
Please, how do I flash recovery for Samsung Grand 2 without pc?
Click to expand...
Click to collapse
only possible only when a existing custom recovery installed on your device,if u want to flash zip but if u want to flash img file then follow my guide which is written above
This thread is really helpful for new users. Thx for this thread, really helpful.
Sincerely, NYT
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Flashing Recovery.IMG without PC
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
It is easy and convinient if you're gonna use this method somehow watch out for the bugs because it may cause u to get stuck on recovery booting or download mode (good news is it wont affect with ur memory).
Use flashify, select the downloaded recovery (Extract when needed) and wait for some few minutes to flash the file.
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
use flashify if you have root
To root without pc,you can use Kingroot