Hi folks,
I'm trying to revive my wife's water damaged Galaxy s2 i9100.
After it's trip into the toilet and then some drying out the only function that seemed to stop working was the mobile reception, so we couldn't make phone calls. After some reading I decided to try bathing it in 99% ISOPROPANOL.
Unfortunately this seems to have removed the operating system from the phone (not sure how else to describe it) We've still got the drag down menu, but nothing else (see attached photos)
I've done some searching on here to see if there might be a fix to at least get me back to where I was so I could use it on WIFI and for music, but I'm struggling to know what to search for.
Can anyone point me in the right direction? Or offer any solutions?
thanks in advance
Andy
What ROM are you on? 4.0.4 right?
BTW You didn't use a hair dryer, did you?
Sent from...this is not even my S2
Try to leave the phone for some time in a jar full of rice. Many reported that rice absorbs wet from the phone.
Alcohol evaporates faster than water.
This is about software, seen it before.
At least let's hope for.
Sent from...this is not even my S2
Changing the ROM Can Help
billythestickboy said:
Hi folks,
I'm trying to revive my wife's water damaged Galaxy s2 i9100.
After it's trip into the toilet and then some drying out the only function that seemed to stop working was the mobile reception, so we couldn't make phone calls. After some reading I decided to try bathing it in 99% ISOPROPANOL.
Unfortunately this seems to have removed the operating system from the phone (not sure how else to describe it) We've still got the drag down menu, but nothing else (see attached photos)
I've done some searching on here to see if there might be a fix to at least get me back to where I was so I could use it on WIFI and for music, but I'm struggling to know what to search for.
Can anyone point me in the right direction? Or offer any solutions?
thanks in advance
Andy
Click to expand...
Click to collapse
Hey billy
I guess its better you install a new latest ROM... as your a newbie i'll write down the instructions for you
Read the Intro & Download ODIN
http://www.andromint.com/download-odin-latest-version/
Download the latest firmware (4.1.2) of your region from SamMobile
http://www.sammobile.com/firmwares/1/
INSTRUCTIONS:
1. Extract the odin file from the zip (DON'T BOTHER THE 2 PIT FILES INSIDE)
2. Put your device in download mode. To do so, press vol- down while pressing the power button and the home button.... you will see a different screen with a picture of an android... press volume- up to continue. Connect your phone to the pc
3. Open odin
4. You should see a yellow rectangle with COM:xx and saying ready. It means that your device is ready to be flashed!
5. Extract the files from the downloaded ROM
6. Go into the PDA section and take your .tar file which you have just extracted.
7. ensure that re-partition at the left is UNCHECKED!!
8. Press the flash button
9. When it's finished, it should say that it's done with a green box and your device should reboot by itself
Let me know if there is any doubts or clarifications
Regards
Hi, thanks for the replies so far.
Not sure what ROM it was on and can't check that now, but it was ICS so possibly 4.0.4. I have tried to flash 4.1.2 on there already but that didn't seem to make any difference. I've managed to successfully root and flash my own S2 (using the very helpful guides on here) so fairly confident I have followed the steps correctly.
ODIN recognised the phone and once flashed I got the green box and it said PASS rather than FAIL.
No hairdryer used, but unfortunately my wife did try to turn it on before drying it out properly. We tried the rice trick first, then the alcohol once that didn't work.
Really impressed how helpful people are on here, so thanks very much for taking an interest!
So after you have flashed and passed what happens? Does it boot up. Do you have recovery? What is working on 4.1.2 ?
Yes, it boots, but then all I get with 4.1.2 is the blank screen with the top line of icons and the drag down menu.
Yes, I can get it into recovery mode or download mode
Mb replacement mate. Phone hardware is stuffed edit does recovery work like it should?
flash jb leak.
You can find it using search.
Sent from the little guy
Do you think that will work?
If it does, beer time.
if it doesn't, well, water does that.
Sent from the little guy
Hope for op it works. :thumbup:
Thanks again for your help folks, I'll give that a go over the weekend.
gastonw, is this the one for JB Leak (XXLSJ)
http://forum.xda-developers.com/showthread.php?t=1995767
You got it Billy.
Sent from the little guy
Hi,
Ok, I've just tried that one and it's put it into a bootloop.
Is there anything else I could try? Or is it time to give in?
Now factory reset and wipe cache and dalv cache if davl ent there dont worry wipe other too and reboot. Do wipes in recovery:thumbup: great news its bootlooping sort of
That's right, a bootloop is not a bad thing.
Do a couple of wipes and tell us if the homescreen is back.
Sent from...this is not even my S2
wow, ok
So, I've just selected both the wipe options in recovery "wipe data/factory reset" and "wipe cache partition"
The only other options I get in recovery are "reboot system now", "applu update from ADB", "apply update from external storage" and "apply update from cache" so I haven't done anything with those
Is it important that I get "E:Failed to mount / efs (Invalid argument)" when i do wipe data?
It still says Data wipe complete.
There's no dalv cache showing in recovery for me
Having done that, I get PASS (4:3) in odin, but then it's still in boot loop
Don't go bk to Odin ATM . Dalv missing means you have stock recovery so that's OK. Did you factory wipe a couple of times?
So install ROM with Odin
Goto recovery and do the wipes then reboot. No Odin involved just recovery. What firmware did you install BTW? 4.1.2 ?
Related
Hi everyone. I have a samsung galaxy s vibrant on android 2.2. I am a total noob with any modifications but am going overseas next month and wanted to unlock my phone. After looking into rooting etc. I downloaded odin and darky's ROM resurrection edition. I followed the prompts to go into recovery and wipe etc. and remove battery and turn back on. After using odin and restarting my phone now just flashes the start screen showing galaxy s GT-I9000. I can't enter recovery mode just download mode. I'm unsure what to do and even tried mounting another recovery file on odin which lead me to the same point. Any help would be greatly appreciated.
Try re-flashing it and see if that works, sometimes that's all it takes. It's possible you just had a bad flash.
I've tried about 5 times now and it seems to keep failing to boot after flash and sticking on the initial boot screen and flashing on and off. Is there a way to download and flash an original ROM and mount on odin to start over?
Try getting into download mode. Hold and continue to hold up & down volume controls while holding in the power button. When the Vibrant logo comes up release only the power button. If you do get into recovery that way scroll down to install zip from sd card and install whatever rom you've got on there that you want to use. Let me know if that works or not.
I can still only get into download mode. I've tried flashing again with both ROMs I have and they both are doing the same thing. Holy frustrating lol
Spike84 said:
I can still only get into download mode. I've tried flashing again with both ROMs I have and they both are doing the same thing. Holy frustrating lol
Click to expand...
Click to collapse
Look for a hard surface... concrete for example.. now take your phone and throw it as hard as you can... Just kidding don't do that, that's a permanent reboot. I know the frustration, I've been there many times. You may want to go back and read through the noob guide, I'm not sure what else to suggest. Hopefully someone else will read this and have a better suggestion. Good luck.
haha yeah the thought crossed my mind. I appreciate your help. I'm still reading through the forum. Most instructions seem to require me to reach recovery mode or usb debugging. My phone is no longer being recognized on the computer but odin is obviously still recognizing so I'm going to try a fresh 2.2 on odin and see if that works.
Good luck, I'm rooting for ya. If that does not work and your close to a T-mobile store I'd just run it in and have them check it out, they may have to replace it.
Thanks again. I'm actually in Canada and using a sub provider from bell "virgin mobile".
I've spent a couple days searching, but there doesn't appear to be a relevant enough thread to help me here, so I've resorted to asking for help, hopefully you guys can help me figure this out.
I got my girlfriend a used Telus SGH-T959D (same thing as the T-mobile version pretty well) several months back. It was on stock 2.1 and worked fine but was very laggy compared to my rooted HTC Desire on oxygen 2.3.2. So I rooted it and installed a 2.2 rom with Voodoo sound control (but no lagfix), and she's been using it this way for months now. It was better than stock but still laggy. I can't remember what rom it was but it was based on Samsuck firmware, hence why it's still laggy I guess.
For some reason, when I originally rooted it I had trouble with CWM recovery not installing, I can't even remember now what exactly was happening, but I managed to get the rom installed without a proper custom recovery, so when I go into recovery it's just the stock Samsung recovery, with no options for nandroid backup, restore, flash zip from sd card, etc. Basically I can't do anything useful in recovery.
Anyways lately, worse and worse she has been getting the Android text message to wrong recipient bug. If you aren't aware of it, it causes messages you sent to go to a different person in your text message message list. No it is not user error.
So I decided to try and data wipe. After this there is basically no launcher when it boots up. The notification pulldown is there and working, and it shows the phone has a signal and wifi is turning on and working, capacitive buttons light up when you press them, but you can't do anything except grab the pulldown.
It won't connect to USB when booted up, phone shows a message that you must close running processes first, or something like that. But I cannot flash a rom from recovery anyways, since it only brings up a stock recovery.
I can get it into download mode, if I hold my tongue just right and try several times, but not sure what to try to flash with Odin. I already downloaded an ICS Passion rom, but then reading the tutorial saw that I must first download CM7 and install that, then upgrade the bootloaders to the GB ones, then flash the ICS rom. I would really like to at least upgrade to 2.3 and something not based on Samsung fw, but the main priority is to get it working again.
Anyways, whatever you guys can suggest to try would be greatly appreciated. Thanks.
Honestly bro, everything I'm seeing in Google makes it seem like that phone is more on par with the Galaxy S Fascinate than with our Vibrant. Although on the exterior they all look so similar... I dunno, maybe check out their forums and see if you get anymore help there?
Here's the link:http://forum.xda-developers.com/forumdisplay.php?f=718
Goodluck!
The title of this thread looks similar to my problem with my Samsung Vibrant. So I would ask it here, too.
I'm not sure if I bricked my vibrant, it's still power up, only to to first screen, which has the words Vibrant (and) Samsung and stay there forever.
I first rooted my Vibrant successfully.
Then, I've followed the instructions below:
1. Download the latest version of the ROM from the original development page.
2. Transfer the downloaded zip file to the root of the internal SD card on your phone.
3. Turn off your phone and wait for complete shutdown (wait for capacitive button lights to go off).
4. Then, boot into Clockworkmod (CWM) recovery. To do so, press and hold these 3 buttons together: Volume Up, Volume Down, & the Power button till the screen turns on, then let go of the buttons. In recovery, use Volume keys to scroll up and down and power key to select an option.
5. Perform a full Wipe (this will not wipe your SD cards)
a. Wipe data / factory reset –> then Select Yes - Wipe data/Factory reset on the next screen.
b. Select “mounts and storage“, then select “format system” -> select “Yes” on next screen to confirm. Then, select “go back” to go back to the main recovery menu.
6. Now scroll to “Install zip from sdcard” and select it.
7. Select “Choose zip from sdcard”. Scroll to the file you transferred in Step 2 and select it.
8. Now confirm installation by selecting “Yes — Install **your_rom_file_name**.zip – The ROM will start installing.
9. The phone will reboot to recovery in the middle of the installation, then continue installing the ROM.
When I got to step 7, instead of running the zip file downloaded on step 1. I run the update.zip (something like that). And I couldn't get back to the CWM recovery screen anymore. Only I can boot it to the regular recovery screen, where it let you:
reboot the system
reinstall packages
delete all user data
delete cache data.
Or boot up to the screen described at the beginning of this post.
So what should/can do to fix this problem?
I think my phone is t959 (it's t-mobile Samsung Vibrant)
Thanks for the reply. As far as I thought the only similarity between this and the at t fascinate was the name fascinate. There's is the i5000 and mine is the t959d? Should this post be moved over there? I found a thread there with someone having partly. the same issue as mine not being able to install cwm but its been there for days and likely will not be replied to.
I've spent a lot of time trying to fix messed-up installs. Seems to me that if for any reason you can't rrflash the rom, or reflashing and wiping doesn't work, just Odin-ing back to JFD and going from there is the best bet.
Well I was about to go ahead and download stock JFD and try flashing that but it appears that Mega upload has been shutdown by the FBI for fraudulent activity, and Rapid share is not working either. Maybe they're too busy because of the mega Upload shutdown or they were owned by the same people and have also been shut down. So now I'm not sure where to even find files that are safe to flash.
I just spent another hour on here and Android forums, and basically all the the threads are one or two posts, with no resolution to the OP, and none of the downloads links anywhere are working. I'm pretty patient but I'm ready to give up. Does anyone want to trade a soft bricked T959D in mint condition for any old beatup HTC that works? I've had my fill of Samsung's now.
No trade sorry but if you want to donate shoot me a pm.
Before you dump it, give me some time to look into this and I'll see if I can get you up and running with some files. Sammys are way user friendly unless you aren't doing something right, then you could always go back to stock.
Hold the phone. Haha. I'll get back to you.
You too ciditin
Thanks Woodrube, I will definitely wait patiently as long as I know I'm going to be able to sort it out eventually. I'm busy with schoolwork so even though I enjoy this kind of thing I hate spending hours upon hours on it just trying to get the phone operational again.
I've been spoiled by my htc desire, it's been almost foolproof to do anything after spending a short time reading a few FAQ's and there have been no close calls. Soon I'll probably try an ICS rom once they get a bit more stable.
I will definitely do a donate if you can help me get it going with a decent rom. I would love to have lag fix on it since my girlfriend is a bit annoyed at the lag.
Since I got my first Android phone in August 2010, I've rooted and rom'd an LG Shine Plus, LG Optimus One, HTC Desire, the T959D and Galaxy S2 T989D (sold after I got it on an early renewal). I also had to fix my sisters I9000M after a failed 2.3 update operation. So I'm no expert on this, but I've got a little bit of experience messing around with stuff. Just they all require different processes, different programs to do the job, so you have to relearn it for every new phone.
The Samsung's have been the biggest pain compared to the others, but I think it's mostly because the Canadian versions are always slightly different than the Tmobile version, but besides that Samsung always has several different versions of the same.
If I get this thing up and running again I will probably check out your GPS fix thread, cause the GPS on this phone would lock on but it was way out to lunch. Like 6 streets away from us out to lunch.
I found the way to fix my problem, hopefully it'll fix yours.
I was able to restore my stock.
Here is what you have to do.
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
DOWNLOADS:
ODIN application
512 PIT file - I can't post link so pm me
T-Mobile Vibrant JFD Image – I can't post link so pm me
USB Drivers from the Samsung Galaxy S – 32 Bit Windows Download \ 64 Bit Windows Download (again I can't post link, yet)
INSTRUCTIONS:
1. Turn off your phone (remove battery, and usb cable to pc).
2. Plug usb cable to your phone (this is just for easy to connect to the PC in the next step), do NOT connect it to your pc just yet.
3. Get your phone into DOWNLOAD mode by holding the Volume Up, Volume down, and plug your usb cable to your PC. A yellow digging Android sign should be on the screen of your phone. This may take a few tries to get it right.
3. Launch ODIN.The third box dow from the top-left box should then say a COM port (the box under the top-left box should be yellow).
4. In ODIN, load each file with its corresponding field:
___a. Click PIT and select *.pit file extracting from the 512 PIT file above.
___b. Click PDA and select the *.tar, stock JFD file.
5. Don’t check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6. Hit “start.” Be patient for a couple minutes! (The bar under the top left box should show the progress, and on you phone, too)
7. You should have your Vibrant back in with stock configuration.
Good luck!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
350Rocket said:
I will definitely do a donate if you can help me get it going with a decent rom. I would love to have lag fix on it since my girlfriend is a bit annoyed at the lag.
Click to expand...
Click to collapse
Ok. I wasn't soliciting for a monetary donation, I was just going off that you wanted to trade. I can't trade but if you ever want to donate your phone then just PM me.
I have to agree with kawika that everything I have read has been that your model number is for the Fascinate. Easy tip off would be; does your phone have a sim card? It is probably a CDMA phone with no sim slot. I suggest getting the files you need from the Fascinate forums as I am almost positive that the T959 files will not work on the T959d. Since you have modded a I-9000m you know that they are slightly different than the I-9000. Same thing goes with this circumstance.
Good luck and sorry that there wasn't more I could do but it is just a different phone.
@Citidin - Good to see you got yours solved. If you have questions, please ask (in the correct thread for your question a this one will probably be closed out).
It definitely has a sim card and it's HSPA, I pulled the Sim card out and put it in my HTC Desire for her to use, and put my SIM card in this crappy little LG Optimus One that's too small for me to type on. So I guarantee it has a sim card and is nothing like the Verizon phones which will not work on any of the Canadian carriers AFAIK. I think nobody understands what the phone is, and that's why almost every thread with a problem like this ends in 0 replies. I think from now on I will stay away from Samsung's abortion phones that they sell in Canada. Or at least I will research community support before getting one.
Ours is called the Fascinate, but its completely different model # than theirs, it is the T959D. Just like how the new Telus galaxy S2x is the T989D, same phone as the T mobile T989_.
For some reason there seems to be a few posts in the Fascinate section, for Telus only, I think that only started because of confusion about what the phone was, but the phone has nothing in common with the Verizon CDMA version. Actually I think if you look up, just about every phone that Telus or Bell (same network basically) gets, is a phone that T mobile got first. HTC Amaze being another one. HTC Desire Z is the same as the Tmobile G2.
Sorry I misunderstood you about donating the phone itself. My last effort will be the JFD file that Citidin sent me a link to. Hopefully that gets it going. If not I will stash it away until I have extra time to try again.
Well once I got the JFD file downloaded and put phone in download mode, turned on Odin, realized the PC recognizes the device attached and being malfunctioned, so I cannot flash with Odin.
I tried Heimdall which I downloaded yesterday, but the program won't load as it says I'm missing a DLL file.
I tried Android flasher which I downloaded who knows when, and tried to just install a recovery image with it, but it gets stuck while pushing recovery image and the program locks up.
I decided to try my girlfriends Laptop instead of mine after maybe 40 failed attempts to get Odin to communicate on mine, and to my surprise it recognized it right away. I transferred my files, with the JFD to this computer and then flashed with Odin. It took about 2 minutes and it was up and running. I checked about phone and it said 2.3.3 firmware. Really confused I looked back at odin and realized I flashed the I9000M stock 2.3.3 firmware (KG3) that I flashed on my sisters phone back around xmas. I forgot I did that on this laptop.
Anyways it is working as it should except for the home button not working (which I had already read about in a thread about using I9000M or Vibrant roms on the T959D).
While it is unfortunately stock again, the 2.3.3 should fix the original problem of sending to texts to the wrong recipient, and it also seems a lot less laggy. I think I'll just let her try it as is and hope she is happy.
If you use the JFD file from the link I sent you, it should be the stock Tmobile Vibrant.
Similar problem
Sorry dont mean to hijack your thread but I think I am having a similar problem - posted in the wrong spot before so hopefully I am ok here...
Have a Vibrant and some how got crossed up on it.
I have been able to use Odin to update the phone, however after it says its done, it does a reboot as it supposed to, shows the samsung screen then just shuts down.
After about a hundred tries, someone pointed me to Eugene's no brick. I tried that and it will fix it so it will boot and go into recovery, but I can't seem to do much once I get there. My only options are to update, wide data and wipe cache. Can't get to the point where I can load an update onto the unit.
I tried wide data and reset, then reboot. It shows the samsung vibrant logo, then the splash screen, then the big S and then screen goes black and the cap buttons stay lit.
If I try to go back and load the stock pit and jfd file, it just goes back to not booting at all and shutting down after the logo
I cant seem to get it into recovery unless I do Eugene's fix
In one of my earlier attempts, I did check to repartition as direct in one of the other threads - been chasing this a while now!
Edit: It was originally a bell phone - does this matter?
If it was a Bell phone than it should be the I9000M. It sounds like your problem is a bit different than mine was. I was able to get into recovery mode and download mode just fine. I just didn't know which files to flash with.
I intended to flash the JFD that citidin sent me, but I accidentally use the KJ3 (latest I9000M 2.3.3 firmware). The I9000 and Vibrant roms are compatible with the T959D Telus Fascinate though, only problem being no home or search button.
It sounds like the Eugene thing (whatever that is, I'm not familiar) gets you into stock recovery. Like my original issue, you cannot flash or mount the sd card, or much of anything with the stock recovery.
Do you know that the file your flashing is compatible with your phone (the I9000M I assume)? More info that would probably help, is what firmware did you have on it before, was it JFD? What update did you try on it? Bootloader version - there are gingerbread bootloaders, and froyo bootloaders I think?
Have you tried different files other than the one that doesn't seem to boot up for you? I think most of the tutorials I've looked at, said not to check repartition. When i finally got this T959D working with the I9000 rom I did not check repartition and did not select a pit file, just the PDA, phone, CSC.
Yes it is a I9000M - I was trying to load the JFD tar file along with the 512 pit file. I followed a thread in the I9000 section and loaded a JPD tar file onto it, now it shows up as a I9000B - maybe I should stop
I can now get into recovery and or download (i think the steps are differant than hold both volume buttons - mine is holding the volume one way for recovery and the other way for download, along with home and power)
Wondering if I am in this bind because it isnt really what most are calling a Vibrant - maybe under Bell it is something else.
Bootloader? didn't know I had to do anything there
I just picked up the phone used from someone - I assumed it was stock and didn't do a good check to see what was on it.
I9000m is not the Vibrate but rather the Bell version of the Captivate. There is a dev section for the I9000m in the I9000 group.
I would definately stop what you are doing and read over there.
******
Also 350 you can re-map your keys to work but I am mobile now and cant search it for you. Reason being that the. Vibrant keys are laid out differently in, ahh can't think right niece where they are, but it is fixable. Just search key remap or remapping.
Thanks very much for the help - have to wonder why they cant call them the same names regardless of where they are sold - guess thats why they get the big bucks
Hey guys,
Right i have a MAJOR problem,
Smashed my LCD screen the other day (Yes im super pissed off),
The phone boots but the screen wont display a thing,
Luckily i have Accidental cover on my phone warranrty,
BUT i flashed a custom ROM or few haha,
Anyway, I need to get my phone back to stock, Not an easy task >"<...
I think i managed to flash Gingerbread 2.3.6 back on the phone,
But im getting bootloops (I was coming from an AOKP ROM)
So i need to go into recovery and wipe cache/partition but i cant see a damn thing,
Can someone on stock type kernel please check for me,
Once in recovery,
Do i press down TWO times to get to wipe data/factory reset,
Then on the next screen press up FOUR times, so that i get to YES,
Then after that it will automatically go to the main screen and i just press the power button to "reboot" unit right?
PLEASE HELP!
After this i need to use my friends JIG to reset the binary counter, I hope this wont be so hard >"<
Please help me guys
Use ADB, that way you can see what you're doing on your PC. Search for tutorials how to use it on here/Google.
Moved to Q&A
ok well here it is ive been the very proud owner of my galaxy note since launch date well ive been too chicken to root but after recieving my stock ics update yesterday i decided to look into rooting it so i came on here seen a couple threads and seen they were saying that the old root method with gingerbread would work with the ics so i attempted it downloaded odin v1.85 ran the tar file it looked liked it worked odin said pass well it rebooted and now it is stuck on the second samsung logo with the blue glowing behind it well i searched many threads and cant find a answer on rootgalaxynote.com another guy had the same problem and i seen they told him to factory data reset so i di but with no luck it is still lokking at me stuck on the samsung logo man and i dont have insurance effin atnt screwed me on that one so wat are my options here or do i have none im prayiung this is not a hardbrick please help
THIS WILL FIX YOUR ISSUE AS I WENT THROUGH THE SAME PROBLEM YOU ARE EXPERIENCING.
WARNING IT WILL DELETE YOUR DATA. IF YOUR DATA IS IMPORTANT FIND ANOTHER MEANS...
You MUST have Kies full installed on the desktop/laptop and make sure you're updated to the latest version.
1) Boot your note into download mode(hold down volume button at the same time as the power button, let go of power button when you feel
your phone vibrate but keep holding down button until you see a prompt to push up volume button to continue or down volume button to
cancel, hit the up button your are now in download mode.)
2) Connect your Note to the laptop with factory USB cable
2) Launch Kies on your desktop (full version)
4) Choose Tools, Firmware upgrade & initialization
a) While in download mode, pull battery and enter the S/N & model name (ALL CAPS!!)
b) It will prompt to initialize to original settings. Click "YES"
c) It will prompt to initialize the latest version. Click "YES"
d) It will download the firmware upgrade components (DO NOT DISCONNECT THE DEVICE!!)
5) It will prompt for firmware upgrade and initialization.
a) Click check box for reading above information
b) Click your choice if you want your information saved on Samsung Kies corporate servers (I choose WITHOUT saving).
Just kick back, wait and the phone will update to the original out of box software with the latest updates already applied. No issue with anything, no tripping of the flash counter, and Samsung/AT&T knows now different (if you tripped the counter back before performing this, or performed the process of installing CWM recovery through ADB as to NOT trip the flash counter when changing recovery).
This is the EXACT process I did, and had an AT&T tech verify and it's not detectable I was rooted, and was running a custom ICS ROM. Now, I will qualify that I DID the Recovery installation with ADB so that I didn't trip the counter with the Recovery installation. So if they are able to check the binary information to detect modification even with flash counter reset, that's out of my hands and can't confirm or deny.
THIS WILL FIX YOUR ISSUE AS I WENT THROUGH THE SAME PROBLEM YOU ARE EXPERIENCING.
WARNING IT WILL DELETE YOUR DATA. IF YOUR DATA IS IMPORTANT FIND ANOTHER MEANS...
isimme said:
THIS WILL FIX YOUR ISSUE AS I WENT THROUGH THE SAME PROBLEM YOU ARE EXPERIENCING.
WARNING IT WILL DELETE YOUR DATA. IF YOUR DATA IS IMPORTANT FIND ANOTHER MEANS...
You MUST have Kies full installed on the desktop/laptop and make sure you're updated to the latest version.
1) Boot your note into download mode(hold down volume button at the same time as the power button, let go of power button when you feel
your phone vibrate but keep holding down button until you see a prompt to push up volume button to continue or down volume button to
cancel, hit the up button your are now in download mode.)
2) Connect your Note to the laptop with factory USB cable
2) Launch Kies on your desktop (full version)
4) Choose Tools, Firmware upgrade & initialization
a) While in download mode, pull battery and enter the S/N & model name (ALL CAPS!!)
b) It will prompt to initialize to original settings. Click "YES"
c) It will prompt to initialize the latest version. Click "YES"
d) It will download the firmware upgrade components (DO NOT DISCONNECT THE DEVICE!!)
5) It will prompt for firmware upgrade and initialization.
a) Click check box for reading above information
b) Click your choice if you want your information saved on Samsung Kies corporate servers (I choose WITHOUT saving).
Just kick back, wait and the phone will update to the original out of box software with the latest updates already applied. No issue with anything, no tripping of the flash counter, and Samsung/AT&T knows now different (if you tripped the counter back before performing this, or performed the process of installing CWM recovery through ADB as to NOT trip the flash counter when changing recovery).
This is the EXACT process I did, and had an AT&T tech verify and it's not detectable I was rooted, and was running a custom ICS ROM. Now, I will qualify that I DID the Recovery installation with ADB so that I didn't trip the counter with the Recovery installation. So if they are able to check the binary information to detect modification even with flash counter reset, that's out of my hands and can't confirm or deny.
THIS WILL FIX YOUR ISSUE AS I WENT THROUGH THE SAME PROBLEM YOU ARE EXPERIENCING.
WARNING IT WILL DELETE YOUR DATA. IF YOUR DATA IS IMPORTANT FIND ANOTHER MEANS...[/QUOT
well thanku friend im doing it now and every time i get to 69 percent it says ther was a problem with the download file and starts over again this happened wen i originaly did the ics update but after it restarted it wold go to 100 but this time it has already been 3 times it stoped at 69 percent trying again wellit got past the 69 percent and got to 85 percent and said unzip error and closed the whole operation i had to enter in the s/n n model again and start over hopefully it works im trying again
Click to expand...
Click to collapse
getting stuck
every time i get to 69 percent it says error in donload file wt hell
you r amazing
yes it worked after 15 trys but it did work you r the man i c its getting past the sam logo
You cannot root an ice rom with a gb kernel. You need to find a rooted ics kernel and flash it with Odin. Keep in mind it needs to be an Odin flashable .tar. if you need help finding one pm me and I will direct you to one.
Sent from my SAMSUNG-SGH-I717 using xda premium
Rooting is very easy and quite low risk as long as your getting your information from reliable sources. The xda community is very knowledgeable and generous. MOST of the information you find here can be taken to heart.
Sent from my SAMSUNG-SGH-I717 using xda premium
aevans88 said:
You cannot root an ice rom with a gb kernel. You need to find a rooted ics kernel and flash it with Odin. Keep in mind it needs to be an Odin flashable .tar. if you need help finding one pm me and I will direct you to one.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yerp LOL, he knows now...we been pm...a learning experience for him....
We were all noobs at one time. Hell I still find things that I wonder about. I used to be really scared of bricking my phone because I soft bricked my international sgs2 the first time and thought I was screwed. Now I know that its pretty hard to hard brick a galaxy series phone
Sent from my SAMSUNG-SGH-I717 using xda premium
Hello everyone,
As this is my first post, i'd like to apologise in advance if this issue i'm about to detail has been posted before, but after about a month's worth of trial and inevitable error, reading everything i could find and following every walkthrough i've come across to the t...i'm at wit's end here.
So, i've got a Galaxy SII GT i9100, standard euro version i suppose, my provider is Vodafone Romania (wretched buggers the lot of 'em).
My troubles had started ever since the update from 2.3 with which the phone had arrived, to 4.0.3. I made the update through my home wifi, and i'm guessing the software was provided by either Google, Samsung or Vodafone Ro.
In any case, 4.0.3 was a lot more sluggish and badly calibrated in terms of touch responses and video lag while streaming.
About a month ago i got another notification to update to 4.0.4. This update worked fine for about 20 minutes till the thing decided to freeze up completely, and not turn off from the power button held down a while.
After i had removed the battery and turned it back on, i simply got the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Naturally Kies is a steaming pile and recovery fails every time with a message composed only of empty squares instead of text, i'm guessing it's because i lack a certain language pack, but the only option is "OK".
So i turned to Odin, when that failed, instead of wiping the counter before sending it into the warranty, i did not. so they voided my warranty because it seems Odin is "unauthorized".
Multiple tries and failures later, quite a few attempts by other people that know more about this than myself...some have said i've got corrupt flash memory while other say "NAND rw corruption".
I'm a rather experienced pc builder...but this seriously stumps me.
I've also tried the walkthrough here on XDA with the same results.
So any new input would be much appreciated...be it through skype or another medium.
can you enter the download mode, if yes then try flashing stock firmware which comes with .PIT file (using odin)......may be that will help
try this thread as well http://forum.xda-developers.com/showthread.php?t=1457458
RazorwireClouds said:
Hello everyone,
As this is my first post, i'd like to apologise in advance if this issue i'm about to detail has been posted before, but after about a month's worth of trial and inevitable error, reading everything i could find and following every walkthrough i've come across to the t...i'm at wit's end here.
So, i've got a Galaxy SII GT i9100, standard euro version i suppose, my provider is Vodafone Romania (wretched buggers the lot of 'em).
My troubles had started ever since the update from 2.3 with which the phone had arrived, to 4.0.3. I made the update through my home wifi, and i'm guessing the software was provided by either Google, Samsung or Vodafone Ro.
In any case, 4.0.3 was a lot more sluggish and badly calibrated in terms of touch responses and video lag while streaming.
About a month ago i got another notification to update to 4.0.4. This update worked fine for about 20 minutes till the thing decided to freeze up completely, and not turn off from the power button held down a while.
After i had removed the battery and turned it back on, i simply got the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Naturally Kies is a steaming pile and recovery fails every time with a message composed only of empty squares instead of text, i'm guessing it's because i lack a certain language pack, but the only option is "OK".
So i turned to Odin, when that failed, instead of wiping the counter before sending it into the warranty, i did not. so they voided my warranty because it seems Odin is "unauthorized".
Multiple tries and failures later, quite a few attempts by other people that know more about this than myself...some have said i've got corrupt flash memory while other say "NAND rw corruption".
I've also tried the walkthrough here on XDA with the same results.
So any new input would be much appreciated...be it through skype or another medium.
Click to expand...
Click to collapse
sorry i forgot to mention that i can enter Download mode using Vol. down + home + power, BUT...i can't enter recovery mode or whatever it's called with Vol. up + home + power...that button combo only starts the phone with the same old error message.
also, i've tried this walkthrough
as far as i know if you can enter into download mode, your phone is not dead...........................i don't know much about android development but i am sure that your phone can be revived...........keep searching the forum and try contacting some of the sgs2 developers they might be able to help you
cheers
RazorwireClouds said:
sorry i forgot to mention that i can enter Download mode using Vol. down + home + power, BUT...i can't enter recovery mode or whatever it's called with Vol. up + home + power...that button combo only starts the phone with the same old error message.
also, i've tried this walkthrough
Click to expand...
Click to collapse
pretty much what i'm thinking as well, there should be a way to restore it without resorting to cannibalism and taking a broken phone's mobo.
but i have been searching and being new to these forums i've no clue who to contact, but anyways, thanks for the reply sir. my thanks
bumpdonkey.
Come on,are you trying different things like disabling kies/USB cables/ports/different PC.
Have you tired flashing the stock Rom through Odin? You can find it at sammobile.com.
Sent from my SGH-I727 using xda app-developers app
as i've stated in the first post, i've tried almost everything. this includes flashing a series of different roms, kernels, pits etc.
as well as trying it with kies uninstalled, and since it's been attempted by other people, i'm guessing it's superfluous to try it on another PC than my own because others have already done so with it. and the cable is just a cable.
i have the same problem and i still searching
when i try to mount the data partition it fail
i tried all things but still no solution
come on guys help us to revive our sgs2
so far, the most i've accomplished was bringing it from the error message to the boot screen where it remains forever...by flashing the bootroom.
but if i tick "nand erase all" it fails to do anything.
No bumping
Do not bump this thread. The answer will come because someone knows it, not because it's bumped every few hours.
which reatmne
sorry about that, i'll cut the bumping then...i'm just...beyond frustrated at this point...it's been a brick for about a month now...nobody seems to know how to fix the blasted thing
Maybe...
I had once got stuck.
If you could get to the recovery, i think you can try wipe data, wipe data, wipe data....................
Then flash stock rom, or those you think is reliable.
wipe and flash. wipe and flash.
If you can't, use ODIN....... the only way
flash and flash the stock rom or any others.............
if it works, there you are.
Hope it works!!
you may wanna read the whole topic before replying, just saying
Your phone's obviously stuffed and only one of two (but 95% likely only one) things is going to fix it (nothing anyone here can suggest will).
I think you know what they both are. Continuing to post to this thread is simply delaying getting your phone fixed or getting another phone.
RazorwireClouds said:
you may wanna read the whole topic before replying, just saying
Click to expand...
Click to collapse
Exactly pal.Surprised he didnt say "if only you could boot up the phone you wouldnt need to get it repaired"......lol
MistahBungle said:
Your phone's obviously stuffed and only one of two (but 95% likely only one) things is going to fix it (nothing anyone here can suggest will).
I think you know what they both are. Continuing to post to this thread is simply delaying getting your phone fixed or getting another phone.
Click to expand...
Click to collapse
if i may ask what are thee two things which are going to fix the phone cuz mein is in the same situation thanks
I'm stuck in a similar position I'm stuck at galaxy s2 boot screen can get to download mode but not recovery I havnt tryed Odin yet only because I don't know what I'm.doing with Odin could somebody direct me on where to get the right files n stuff for Odin please I would be really gratfull thanks
Sent from my HTC Sensation XL with Beats Audio X315e using xda app-developers app
Google Odin 3, use the 1.85 version. Get the stock Rom from sammobile.com for your device. Unzip Odin and then run it. In PDA browes to the stock Rom. Make sure only auto re boot and F. Reset are checked in odin. Then hit start. Check the stickies for more details. See vincom's in the development forum.
Sent from my SGH-I727 using xda app-developers app
Cheers mate am all sorted now bk rooted with the rom I wanted lol
Sent from my GT-I9100 using xda premium