[Q] Why won't the 5.0 S Player flash JBs rom? - Samsung Galaxy Player 4.0, 5.0

Hello,
I have been trying to learn and understand everything I can about flashing Jellybean onto my galaxy player. I have spent the past 3 days trying to figure out everything I could. I really, really wanted to do this on my own and not comes to xda to ask, however, I have run out of ideas.
These are the specs:
YP-G70
Firmware: 2.3.5
Kernel: http://forum.xda-developers.com/showthread.php?t=1414565&nocache=1
Build number: Gingerbread.xxkpf
Phone from UK: YP-G70CB/XEU
Roms Tried and failed: (All the JB roms for 5.0: http://forum.xda-developers.com/showthread.php?t=1720457)
Status 7 error each and every single time when flashing a rom.
After formatting/ wipping everything, nothing has worked whatsoever. I have a backup, which I have been using to restore for more than 20 times.
I have tried all the instructions for each thread but none have worked whatsoever.
If you can help, I would like to be able to stick to this rom and flash it onto my galaxy player: http://forum.xda-developers.com/showthread.php?t=2235446
Any suggestions are welcome.
Thanks

flash a cm 9 rom first

would this rom work?
http://forum.xda-developers.com/showthread.php?t=1679957

yes
and there is no need to boot into this rom after you flash it. Just select the power off option in cwm and then boot into recovery again with power and volume up. Now, you will be able to flash a cm10.1 based rom. Dont forget to flash the gapps also.

Did you flash cwm? if not then do so before you flash the rom :silly:

Related

[Q] SG2 rooted, but can't flash other ROMS via CWM...

so, I've had my SG2 for like a month now, rooted and all, but the problem is , i can't flash any other ROMs(but stock ROMs) or kernels (except for CF root,stock and siyah kernels ) on it via CMW... each time i tried to flash anything, i end up stuck at "galaxy s2 GT-I9100" boot-up logo.... I've tried flashing CM7 then i got the boot-loop ( even with double flash, or triple didn't work for me) and i can't get into CWM when i got the boot-loop....
someone please help me.. i read alotta threads and none of them got similar issue like mine...
i guess its true what they say : every galaxy s2 is different from the rest.
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
InFa_ReD_1 said:
If your phone has cf-root/kernal and cf cwm can you just flash over top codeworkx's kernel and do you have to re-root?
Click to expand...
Click to collapse
If you already have root then you won't loose it.
geko95gek said:
Hmm....must be something you're doing wrong. Nothing to do with Galaxy S2 being different.
Have you always followed the dev's instructions while flashing roms?
Wiping data, cache? Matching up the kernels and roms?
As far as I know, there hasn't been a single person who completely failed to install VillainROM on their SGS2.
I would advise you to give it a go.
Transmitted from a Galaxy far far away via XDA lightspeed telepathy.
Click to expand...
Click to collapse
I used to use VR 3.0 but could only work with stock kernel or cf root kernel has never booted with the ROM's kernel..
tomascunill said:
What ROMs have you tried to flash?
If you're tring to flash AOSP ROms like CM7 or MIUI it's normal if you're not doing it with a comatible version of CWM. For example, cf root kernel installs a modified version of CWM on your device, which is not compatible with CM7. IF you want to flash CM7 first you have to flash codeworkx kernel http://forum.xda-developers.com/showthread.php?t=1118693, and then enter recovery (the new CWM installed with this kernel) to flash CM7.
Now if you can't flash samsung firmware based ROMs (villainROM, Leomar Revolution, Batista...), I don't know what it could be. I never had a problem flashing samsung firmware custom ROMs with the cf root CWM recovery.
Click to expand...
Click to collapse
My phone came with CM7, but i flashed it with rooted stock coz i wanted to have a feel of it... but now i'm done with it but i can't get any roms to work... so frustrating.
i literally have tried flashing ALL Roms (ligtnung, gingerbread,vr, cm7), during the 1st few days that i got my phone it worked with VR 2.5 and 3.0, even MIUI.. but after i flashed with some Asian stock ROM via odin... nothing would work through cmw anymore...
i seriously don't know what i did wrong...
btw, right now im using basebad ver: I9100XXXKI4, kernel: 2.6.35.7-siyah [email protected]#20, build number GINGERBREAD.ZSKI3.
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuse to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
tomascunill said:
I really don't know. YOu should try to go the closest possible to stock and try from there. DO a full wipe, wipe data, wipe system, everything and flash a stock ROM from your country and carrier (there is a thread from infratech where you can get carrier specific ROMS). THen connect your phone to kies (maybe yo get an oficial update) and then do everything from scratch, root, install CWM, etc...
That's what I'd do but I really don't now if it's the best option.
Click to expand...
Click to collapse
well, i'm gonna try that and see if it works, am also goin' try to see if downgrading to 2.3.4 or something would work too...
but please if you got any more ideas, just keep it coming..
thanks
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
thanks for everyone for helping, and i hope this can help others on the same boat as me..

can't mount in recovery and kernel panics

Hello,
Today I thought, let's try out ICS! Found this guide (can't post outer links, search for "android advices ICS Android 4.0.1 XXKP2 " in google), and used it to update my phone to ICS.
Well, after trying out the rom, I would like to go back to my MIUI backup, rooted it, installed clockworkmod recovery and booted up the recovery mode. The recovery said "can't mount /cache/*" for all cache folders. So I couldn't restore my backup.
After reading some stuff I installed a recovery through Odin. Worked like a charm, no alerts of mounting failures. Restored my backup, but when it was rebooting it gave an "Kernel Panic - Upload mode" screen. Couldn't do anything, so put the battery out and back in.
After this I installed ICS again with the same steps as in the guide. This worked! Rooted and installed recovery again, no problems so far. Tried a fresh install of MIUI but with the same problems.
So I can flash ICS but I can't flash any other rom, what can be the problem?
Every help and tips are welcome!
Thanks in advance!
Same thing happened to me last nite, kernel panic, and im panic too. This happened after flashing that cm9 coz i just wanna try and see how cm9 look like and i know im not going to stick with it, just for trying. Now im back to miui.
What i did is i flashed back to stock rom, root, then flash miui, or any rom that you want. Very simple.
Rom : MIUI ICS XGT 'EXTENDED'
Kernel : Xcell-69X
Modem : XXKP8
Sent from Galaxy SII
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Thats not true my friend, you flash any custom rom. Nothing need to worry about.
Rom : samsung stock firmware
Kernel : stock kernel
Modem : stock modem
Sent from Galaxy SII
Gepstra said:
I have the same problem I guess, tried ICS, went back to stock which I was using. Got Kernel panic upload mode several times, solution for this was flashing an older 2.3.6 version.
After this no more kernel panics...
But I can't flash any custom roms anymore.
My phone's working luckily but it doesn't work like it's supposed to
Click to expand...
Click to collapse
Did you make sure to flash back the old GB bootloaders? Restoring a backup wont flash them back.

[Q] flashing cwm causes bootloop

Ok, because I was so happy with cyanogenmod on my galaxy s I decided to try to install it on my SII.
Silly me, I decided to follow the instructions. couldn't get my trusty odin working, even after a couple of reboots and reinstalls of kies. Heimdall turned out to be the 64 bit version so I needed to find the 32 bit version. Long story short, the instructions sucked...
Then, I tried to install the suggested cwm. After a reboot, my phone entered a bootloop. I could enter recovery but trying to flash cm10 gave me "Status 7 blabla".
So, I searched on the web for a stock rom to at least get my s2 working again, found one and flashed it. Market keeps on crashing and it's version 4.0.3.
I tried reflashing cwm, cf-root and time and time again it kept creating a bootloop after which I had to reflash the rom with the broken market to get everything working again.
My questions are:
where did I go wrong in flashing cwm? Is there a different version I should flash? what's up with the extremely bad cyanogenmod instructions? Can someone get the market working again?
can someone guide me step by step through the process?
Why don't you flash it via recovery?
Sent from the little guy
gastonw said:
Why don't you flash it via recovery?
Sent from the little guy
Click to expand...
Click to collapse
because it gives the error "status 7"
I can't install a cwm that doesn't bootloop (I can however enter recovery) and in recovery I can't flash a thing because it throws errors at me
Assuming that you are on stock samsung ICS ROM, flash Siyah kernel from Odin
http://d-h.st/Bcf
After this you will get CWM recovery from which you can flash any i9100 CM version.
Sent from my GT-N7100 using Tapatalk 2
quick follow-up:
I had another laptop laying around that was never poisoned by samsung kies, so I decided to give it a try. installed the usb-drivers and used odin to flash another stock-rom version (that actually worked this time )
Then, I flashed cf-root and upgraded to cyanogenmod without any problem.

[Q] ClockworkMod-Recovery 6.0.2.9 - latest?

Hi, I'm a new to rooting, but long time jailbreaker, and man this is way harder than I thought!
I think I'm on the right track, I've uploaded Rom (Super Nexus 3.0 i9100 ect), CWM-SuperSU v0.97 and Google apps (gapps-jb-20130813 ect)
But, I've unfortunately had a couple of failed attempts, originally coming from 4.1.2, I'm now back to 'stock' 4.0.3 and can't update, so I'm going to try again.
So I wanted to know, using Odin, is 6.0.2.9 the latest version of ClockwordMod and/or for the Galaxy S II (if it matters?) I've already got it on there, but I've also got a Siyah on there too, so just want to do another flash to a CWM.
And yes, no quarms about completely wiping the phone, I've backed up all the music, pics, call logs, ect, so just want to learn how to root to the latest version of android, and this version looks great.
Mm it's really not harder than you thought. You're over complicating things.
2 current options :
Have you flashed & are currently running siyah? If so, then boot into recovery and flash supernexus & gapps. Done.
Not currently running siyah? Flash siyah via Odin in download mode. Reboot then into recovery and flash your rom and gapps. Simple. Rooted and new rom.
As far as using CWM on its own (ie just flashing the recovery) it'll only be temporary. Every reboot it will reset to stock recovery. Hence why you need to flash siyah to keep the permanent recovery & be able to flash a new rom.
Sent from a galaxy far, far away
Hopper8 said:
Mm it's really not harder than you thought. You're over complicating things.
2 current options :
Have you flashed & are currently running siyah? If so, then boot into recovery and flash supernexus & gapps. Done.
Not currently running siyah? Flash siyah via Odin in download mode. Reboot then into recovery and flash your rom and gapps. Simple. Rooted and new rom.
As far as using CWM on its own (ie just flashing the recovery) it'll only be temporary. Every reboot it will reset to stock recovery. Hence why you need to flash siyah to keep the permanent recovery & be able to flash a new rom.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Thanks Hopper,
I decided to use CWM 6.0.2.9 (so now there are three kernals, 2 CWMs and 1 Siyah, wish I knew how to clear them out).
First time I tried to use Super Nexus 3.0, it looked ok, but wouldn't reboot, but then I just re-installed eveything again (both times CWM), and now I've rebooted twice no problems? I think I read somewhere that it had to be done twice, I have no idea why that would be.
Oh yeah, but now I need to get Swype back on there, forgot it was a Samsung exclusive, I'll see how I go from the Google Play, but I'm guessing I could get a custom .apk from the internet anyway.

[Q][GP4] Can't get any CustomRom working

Hey folks,
I'm desperately trying to get a CustomRom working on my GP4.
I'm relatively new to the device, but not to CustomRom's, since I was using a Motorola Defy untill last summer, running CM7.2 and CM9, MIUI and a couple of others.
So here's my issue:
I flashed the Terrasilent Kernel in order to get CWM so I could flash the .zip's from there, as some weren't available for odin.
The kernel works fine, but as soon as I try to flash any CustomRom (I tried CM9, CM10.2, Hydrogen and the PACMAN Rom), I'm just getting infinite bootloops.
I also tried flashing with SD card removed, SD card back in....doesn't help. No matter whether it's done with odin or CWM.
Mostly I get stuck at the Samsung screen , the PACMAN insert coin or the Terrasilent phonebooth .
Does anyone have suggestions how I could make it work?
Cheers!
basti_b24 said:
Hey folks,
I'm desperately trying to get a CustomRom working on my GP4.
I'm relatively new to the device, but not to CustomRom's, since I was using a Motorola Defy untill last summer, running CM7.2 and CM9, MIUI and a couple of others.
So here's my issue:
I flashed the Terrasilent Kernel in order to get CWM so I could flash the .zip's from there, as some weren't available for odin.
The kernel works fine, but as soon as I try to flash any CustomRom (I tried CM9, CM10.2, Hydrogen and the PACMAN Rom), I'm just getting infinite bootloops.
I also tried flashing with SD card removed, SD card back in....doesn't help. No matter whether it's done with odin or CWM.
Mostly I get stuck at the Samsung screen , the PACMAN insert coin or the Terrasilent phonebooth .
Does anyone have suggestions how I could make it work?
Cheers!
Click to expand...
Click to collapse
Did you wipe the data/cache? Also, I believe you're supposed to flash then ROM first, THEN you flash the kernel.
TheKryptonite said:
Did you wipe the data/cache? Also, I believe you're supposed to flash then ROM first, THEN you flash the kernel.
Click to expand...
Click to collapse
Forgot to mention that: I tried various ways: first wipe data/cache, then flash ROM; first flash ROM, then wipe cache; wipe cache, flash ROM, wipe again...
In order to get CWM recovery and being able to flash a zip I flashed the Kernel first. For CM9 I followed this http://forum.xda-developers.com/showthread.php?t=2213152
As I couldn't flash any of the pre-flash zip from stock, I thought it's necessary to flash a kernel including CWM first. It was done in the same way in some youtube tutorial I watched, where the guy already had the terrasilent kernel on his device.
For odin, I will check if it works with first flashin the ROM and afterwards the kernel.
Cheers for your fast reply!

Categories

Resources