I installed CM10.1 Jellybean 4.2.2 using this guide http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123, and for a couple of weeks it worked perfectly. I used CWM to install cm10 and gapps, everything went smooth. Yesterday I was on Youtube on my tablet, and the video and audio kept stuttering and freezing up, so I rebooted. After that, whenever I press power it either A: boots to the boot animation and won't continue further, or B: does absolutely nothing. I can restore to a backup I made and it will work perfectly until I reboot, where the issue above happens. I can also boot to an sd card I have made with Jellybean 4.1, and that seems to work well. I also tried resetting to factory and then completely reinstalling cm10.1, and the same thing occurs. Now I'm actually having problems booting in general. I've tried plugging into the power cord etc, but it just does not want to boot. Does anyone know what I can do to fix this?
Related
I flashed the latest builds from both Coffebeans - http://forum.xda-developers.com/showthread.php?t=1547778 and Pershoot - http://droidbasement.com/galaxy/roms/cm9/p4wifi/ and I'm having the same issue with both of them. The problem is my Tab will randomly reboot then get stuck on the boot animation and just sit there forever. It's already happened twice now where my Tab rebooted sometime at night and sat at the boot animation until the battery was dead. I did do a full wipe before flashing.
Does anyone else have this issue?
Thanks.
i've ran both of those without any problems. did you come from another custom rom or from stock firmware?
foliage green said:
i've ran both of those without any problems. did you come from another custom rom or from stock firmware?
Click to expand...
Click to collapse
I came from Task650's version 14, but I've been flashing the CM9 KANGs for a while and haven't had this issue.
i have had some strange reboots...but never gotten stuck on the boot animation like that..thats the bad part about not having a battery to yank unfortunately
Sent from a Gtab 10.1 running Build 30
Well whenever I can't get something to work right, I Odin stock firmware on it and restart the custom rom process from scratch. Having a clean slate is time consuming and might not even be necessary but it's the only full proof way I can get things to work.
I wiped everything and also formatted /system in CWM and then flashed Coffeebeans latest build from 4/8. I haven't had the reboot and stuck boot animation issue, but now I'm having an issue where every time I charge the tab fully it won't wake up. I have to hold the power button to reboot it. It seems like it's the deep sleep issue, but it's been fine leaving it overnight as long as it's not connected to the charger.
Hello. I have a pretty big problem and i've been trying to solve it for the past 2 days. Everything was running fine but then i noticed that when i wanted to turn auto rotation back it didn't allow me. I clicked on it but it didn't work so i rebooted it and then it worked. If i wanted to switch it off i had to reboot the phone again. This also happens with everything else. Like for example also when I wanted to switch 3g off it didn't work. It's like i turn it off and it turns back on by itself and I have to reboot my phone just for it to work. I did factory wipe + install clean official rom and now im on epsilonproject-ics. I was using Foxhound ics v2 before. Can anyone help? Thank you.
Hello,
since yesterday my Galaxy S2 (summer 2011) started to act wierdly and I am trying to figure out what is the problem.
I was running the latest Sentinel ROM, and I found it "freezed". So I forced restart long pressing the power button. After the restart, I found it freezed again after some (short) time. It also freeze on the boot process.
Apparently in a random way.
So I tried from recovery a factory reset, full wipe, and reinstalling the ROM. Problem still present.
Today I tried logging with ADB logcat, but I can't figure out the issue from the log. I thought a problem with Mali driver shipped with the ROM, but actually it freezes sometime also on boot (so before loading the drivers)
I tried then to flash back the Samsumg original ROM (JB 4.1.2), which apllied nicely. However it freezes also with Sammie's ROM. Also on boot. By example I one time I got the black screen with the writing "Samsung Galaxy GT-9100" getting grey, with some horizonatl black lines. So frozen.
Flashed again with ODIN, again nicely, but it keeps on freezing on boot.
I am clueless. Could it be some issue with the battery? (it's the original, never replaced)
Any help or suggestion appreciated
Thanks
Update:
I tried to flash it back to GingerBread stock by Samsung with Odin. Applied nicely.
It still keeps on randomly hanging :-|
Hi all, hoping to get some help. I rooted my phone the other week and was using viperrom. I had no problems whatsoever, no glitches that I could remember. That is, until I decided to trade my m8 with a friends Note 3. I factory reset it and give it to her, I left the viperrom on because she didn't mind but then the glitches started to happen. The onscreen bottom 3 buttons disappeared for her (home, back,etc.), So I reset it again but the problem persists. I searched for an at&t stock rom and sideloaded that after master resetting, wiping the dalvik cache and all that... now a different problem popped up. It hangs at the HTC logo for what seems like forever, but then I noticed the volume up and down make a noise as if the phone is loaded up. I pressed the power button a few times and eventually the screen turned on and I could see the home screen. This happens every time I restart the phone and I have tried reinstalling the stock rom a few times. I am now in the process of trying a different stock rom.. the first was odexed and this new one is deodexed, I dont know if that makes a difference in my situation but does anyone know what could be causing this? Any help would be appreciated.
Nvm, after a few more master resets it seems to have sorted itself out... not sure what it was but its gone now.
If its the latest version of Viper, based on 2.22 software, you need to update the firmware package, otherwise the long boot times will continue.
Details here: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
Sup guys, so i just had a really strange problem that popped out randomly, i was watching a youtube video and i had to help a person quickly and when i came back just a minute later i saw my phone showing encryption unsuccessfull when i pressed the power button to turn my screen on. Well it said to factory reset my phone, i don't store any important data on my phone anyways so i just went for it, and it restarted went to my TWRP recovery and tried factory reseting it, to no success. It basically failed to access /data/ and other directories and i can't see any files in them through recovery. And so i can't even factory reset it, i can't install a ROM cause the partition is corrupt i assume. How can i "unbrick" this? I was running the good old Temaseks CM 12.1 ROM, has been working fine for a looong time. My PC recognizes the phone but i can't access any data, it just shows that it's connected, odin doesn't recognize it.
Can somebody help me please ? I use my phone alot and it's really important.