Hello, I have a W100 ThL that after the root, does not work the rear camera and LED flash, it also disappeared icona to change the front-to-rear. I tried with original ROM alre (all older than mine), but to no avail. I wanted to try to change the driver with SPMDT, but just load the scatter file, the three sensor windows are empty.
Someone might screw post a recent official rom (mine is 20130627) and the most recent that is on the net is 20130523.
Solutions?
Thank you.
(sorry for my english)
mantonirico said:
Hello, I have a W100 ThL that after the root, does not work the rear camera and LED flash, it also disappeared icona to change the front-to-rear. I tried with original ROM alre (all older than mine), but to no avail. I wanted to try to change the driver with SPMDT, but just load the scatter file, the three sensor windows are empty.
Someone might screw post a recent official rom (mine is 20130627) and the most recent that is on the net is 20130523.
Solutions?
Thank you.
(sorry for my english)
Click to expand...
Click to collapse
Hello Just try the new rom i think is 01/07/2013
http://www.needrom.com/mobile/thl-w100/#comment-10539
well i do the same with ydrargyros in this post http://forum.xda-developers.com/showthread.php?t=2580761
Hi people, please help!
"I recently bought a rebranded iNew i3000 smartphone (1,5GHz quadcore MTK 6589 based, 1GB RAM, Dual SIM). Unfortunately the rebranding shop here had their own ROM installed (Greek/Turbo-X brand) which had no Gapps installed so i decided to flash the ROM to the original stock one, downloaded by the official site of iNew. After the flash, the new ROM works better than expected, with Gapps installed and some tweaks as well, but my capacitive buttons are now dead. Any ideas on how to resurrect the "menu"/"back" buttons?"
the problem with capacitive buttons ι solve it with button savior,
but my problem is the front small camera dosent work (in the camera application dosent exist anymore the button to change front or back camera) any help because front camera is necessary for skype calls,
thanks
up
up
ikaros80 said:
well i do the same with ydrargyros in this post http://forum.xda-developers.com/showthread.php?t=2580761
Hi people, please help!
"I recently bought a rebranded iNew i3000 smartphone (1,5GHz quadcore MTK 6589 based, 1GB RAM, Dual SIM). Unfortunately the rebranding shop here had their own ROM installed (Greek/Turbo-X brand) which had no Gapps installed so i decided to flash the ROM to the original stock one, downloaded by the official site of iNew. After the flash, the new ROM works better than expected, with Gapps installed and some tweaks as well, but my capacitive buttons are now dead. Any ideas on how to resurrect the "menu"/"back" buttons?"
the problem with capacitive buttons ι solve it with button savior,
but my problem is the front small camera dosent work (in the camera application dosent exist anymore the button to change front or back camera) any help because front camera is necessary for skype calls,
thanks
Click to expand...
Click to collapse
after update my huawei p smart 2018 fig-lx1 to pie 9.1.0.120(c432E5R1P3) my back camera not work.i try test with hicare and very strange when check rear camera open my selfie camera and take normaly picture.when try test front camera i have black screen.have some idea what i can.i have one more p smart and work good both camera and try camera on this phone module is ok only diferent is in software on this phone version is 9.1.0.130 just diferent 120 and 130.please help me
i cant find this rom for flash 9.1.0.130(C432E8R1P5)
So I flashed Xiaomi's china rom (V14.0.23.4.17.DEV (TLFCNXM)) on my 12T Pro unknowingly it's a K50 Ultra rom and it worked! everything is working great until I tried my 12T Pro's camera,
The main camera and selfie camera is reversed, as in, when I'm using the selfie camera, it uses the back camera instead of the front, and when using the back camera, it uses the selfie camera instead. Also it's not actually using the main camera, it's using I think is the ultrawide(?)/or the macro lens as the main camera( the very bottom camera lens ), so my real main camera is useless, and the camera shots are very blurry and has a light red(orange?) filter on it.
I tried using GCam but the issue still persists.
I'm fine without using/utilizing all the 200MP this phone has (though it would be nice if there was a fix), I just want a way to fix the reversed camera for the 12T pro.
I would really really love to stay on this rom, as I dislike using roms/custom roms that isn't officially made by Xiaomi so this chinese rom is a godsend.
So I was wondering,
does anyone know a way to at least fix the reversed camera?
Flash a stock rom for the 12T pro or use a Xiaomi Eu rom.
NOSS8 said:
Flash a stock rom for the 12T pro or use a Xiaomi Eu rom.
Click to expand...
Click to collapse
that's the thing, I don't want to use either the official global or the xiaomi.eu rom and would like to stick to the official chinese rom.
I'm guessing there is no way to fix the reversed camera on the 12T Pro using the K50 Ultra china rom? not even like extracting and flashing files from the global rom while using the chinese rom?
The firmware is different.
NOSS8 said:
The firmware is different.
Click to expand...
Click to collapse
While reading that, I had an idea to flash the global EEA 12t pro firmware(14.0.9.0) to my current chinese rom and while my camera is still reversed, it actually now uses the main camera instead of the bottom lens(macro/ultrawide?) and the quality is fixed for the selfie and main camera!, now if only there was a way to fix the reversed camera issue...
edit: after some testing, instead of it using the bottom most lens, it actually uses the middle lens, not the main camera one. Quality is still good though which I find a bit weird. The red filter is gone too.
Now, my banking app needs to verify my face using camera and that of course doesn't work when my camera is bugged out. There is no way to switch between selfie/rear camera inside the built-in camera on my banking app, so it's using the back camera instead of the selfie camera, so with the back camera, no matter how I place the frame to fit my face, it doesn't verify at all....
You should trust the Xiaomi Eu rom as thousands of users do.
Xiaomi Eu rom is present on XDA and has been developing it's rom for 10 years.
5000 downloads for the latest Weekly and 17000 for the stable Miui 14(Based on Cn firmware).
That would be the end of the problem.
You could try replacing /vendor/lib(64)/camera/com.qti.sensormodule.diting_semco_xxxxxxx_wide.bin from 12T Pro, also rename them to the same as your K50U rom.
Better do it by making a Magisk module.
Tonyha7 said:
You could try replacing /vendor/lib(64)/camera/com.qti.sensormodule.diting_semco_xxxxxxx_wide.bin from 12T Pro, also rename them to the same as your K50U rom.
Better do it by making a Magisk module.
Click to expand...
Click to collapse
As I have no idea how to make magisk modules, I tried copying and pasting the camera folder from the 12t pro to the chinese rom and vice-versa many times but it doesn't seem to do anything. Also, rebooting the device resets the vendor/lib64/camera folder with the original files...
I noticed that the china rom doesn't have a "com.qti.sensormodule.diting_semco_xxxxxxx_wide.bin" but the 12T pro has it though.
azamakara said:
As I have no idea how to make magisk modules, I tried copying and pasting the camera folder from the 12t pro to the chinese rom and vice-versa many times but it doesn't seem to do anything. Also, rebooting the device resets the vendor/lib64/camera folder with the original files...
I noticed that the china rom doesn't have a "com.qti.sensormodule.diting_semco_xxxxxxx_wide.bin" but the 12T pro has it though.
Click to expand...
Click to collapse
China rom has them, but file names are different. If you move them manually, you also need to disable avb/dm-verity.
Here's a Magisk module to fix K50U camera when flashing 12T Pro EEA rom. You can refer to it.
K50U_Cam_Fix.zip
drive.google.com
Tonyha7 said:
China rom has them, but file names are different. If you move them manually, you also need to disable avb/dm-verity.
Here's a Magisk module to fix K50U camera when flashing 12T Pro EEA rom. You can refer to it.
K50U_Cam_Fix.zip
drive.google.com
Click to expand...
Click to collapse
Oh. My. God. You are a godsend!! It worked!!!, using your files on the zip and through trial and error renaming files trying to find what the camera sensor's file name is, i got it to finally work!
Selfie is now using the selfie cam and the Back camera is finally using the big camera lens! Thanks thanks so much!
azamakara said:
Oh. My. God. You are a godsend!! It worked!!!, using your files on the zip and through trial and error renaming files trying to find what the camera sensor's file name is, i got it to finally work!
Selfie is now using the selfie cam and the Back camera is finally using the big camera lens! Thanks thanks so much!
Click to expand...
Click to collapse
no need for any module , camera working perfectly on stable version 13.0.8. eu , I am photo freak and I try all mods , everything work perfectly , all addons ..everything.. pro mode is amazing
Hello to all users here in this forum I have Samsung S21 SM-G991B all was good with the phone I was on Firmware - G991BXXU3AUF6 and work great with no problem after I update the phone to New Firmware - G991BXXU6EWAF I have a problem with the camera is stopped working is write a message Camera Failed I go to the test menu that I can check itch camera separately and the camera work and all good I install different camera app from the google play store and all work now I try to update the phone to a new Firmware and the same issue so maybe someone here have this problem or new Firmware that fix is issue with is phone tanks for all help
If other camera apps are working, just clear data of Samsung camera.