[Q] Motorola Atrix TV xt682 - Android Q&A, Help & Troubleshooting

ENGLISH VERSION
Hello friends from XDA,
Recently got the Droid X, Atrix tv model XT682 with 1 chip.
But it comes with android 2.3.7 gingerbread, being very limited.
So I looked for an update, although not official and the only update I found was for the brother Rom version of this handset with dual sim, TV XT687 Motorola Atrix.
Then realized the following:
* I downloaded all the necessary drivers to recognize the device from Motorla
* I downloaded version 6.1.4 of RSD LITE
* I downloaded the 4.0.4 ICS ROM for the link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
(I tested with the two available ITD_V2_27G_2009 and ITD_V2.27D_A10_2009)
I performed the update process by RSD Lite without problems, but after starting the phone the following occurs:
* This ROM is the XT687 which has 2 chips, it recognizes the chip 1 and even the 3g works with the rest of the ROM without problems, including the camera, but to make calls returns the error:
Mobile Network Not Available
Pictures as below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I decided to go back to his original ROM, I downloaded this same link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Tested with 3:
(ITV_151D_A09_2004_0504, ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504)
And after the process in RSD Lite shows PASS message and the machine the following error:
MBM Flash-mode.
IronMaxTV ICS
version: 01:06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Please help me to solve this problem, the device has not even been a week of use and I'm done with him without wanting wanting.
Thank you all.
=====================================================================
VERSÃO EM PORTUGUÊS - BRASIL
Olá amigos do XDA,
Obtive recentemente o aparelho da Motorola, Atrix tv modelo XT682 com 1 chip.
Porém o mesmo vem com o android 2.3.7 gingerbread, sendo muito limitado.
Então procurei por alguma atualização, mesmo que não oficial e o unico update que encontrei foi para a Rom do irmão deste aparelho na versão com dual sim, o Motorola Atrix Tv XT687.
Realizei então o seguinte procedimento:
* Baixei todos os drivers necessários para reconhecer o aparelho da motorla
* Baixei a versão 6.1.4 do RSD LITE
* Baixei a ROM 4.0.4 ICS pelo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
( sendo que testei as duas disponiveis ITD_V2_27G_2009 e ITD_V2.27D_A10_2009 )
Realizei o processo de update pelo RSD Lite sem problemas, porém após iniciar o celular ocorre o seguinte:
* Essa ROM é do XT687 que possui 2 chips, ele reconhece o chip 1 e até mesmo o 3g funciona com todo o resto da ROM sem problemas, inclusive a camera, porém ao efetuar ligações retorna o erro:
Rede Móvel Não Disponível
Conforme Imagens abaixo:
Então resolvi voltar para a ROM original dele, que baixei neste mesmo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Testei com as 3:
( ITV_151D_A09_2004_0504 , ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504 )
E após o processo no RSD Lite, mostra a mensagem PASS e no aparelho o seguinte erro:
MBM Flash-Mode.
IronMaxTV ICS
version: 01.06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Por favor me ajudem a resolver este problema, o aparelho não tem nem uma semana de uso e já acabei com ele sem querer querendo.
Obrigado a todos.

---

RSD Lite was ok to flash XT687 ROM on XT682 ?
You tried to reach Motorola hotline for some info about error 0201 ?

---

Guitwo2 said:
RSD Lite was ok to flash XT687 ROM on XT682 ?
You tried to reach Motorola hotline for some info about error 0201 ?
Click to expand...
Click to collapse
Hello,
yes, usually found in the door and the unit RSD Lite, unaware of this hotline, I searched for many forums including the motorola ma s does not find anything related to this error, just might have to access the menu FlashBoot, but I can not access simultaneously pressing the two volume buttons + and -.
===============
Olá,
sim, detectou normalmente a porta e o aparelho no RSD Lite, desconheço esta hotline, busquei por diversos forums inclusive da motorola ma snão achei nada relacionado a este erro, apenas que poderia ter que acessar o menu do flashboot, porém não consigo acessar pressionando simultaneamente os dois botões de volume + e -.
===================

---

romeci said:
Hello,
yes, usually found in the door and the unit RSD Lite, unaware of this hotline, I searched for many forums including the motorola ma s does not find anything related to this error, just might have to access the menu FlashBoot, but I can not access simultaneously pressing the two volume buttons + and -.
Click to expand...
Click to collapse
And volume down + cam ?

---

If the hardware is almost the same of XT687 (I have one), there isn't cam button. Only 3 buttons: Vol- Vol+ and power
The XT687 behaviour
FLASH MODE: Vol+ and power pressed for some seconds
You can see in device screen exactly
MBM Flash-mode.
IronMaxTV ICS
version: 01:06
Bootloader USB Init SECURE BOOT ENABLE
- XT687 Firmware vers 2_27G_2009 ( ITD_V2_27G_2009 - Stock Recovery Only )
Vol+ Vol- Power about 10 secs
Does not have FASTBOOT
- XT687 Firmware vers 2_27D_2009 ( ITD_V2.27D_A10_2009 - FASTBOOT embedded )
You can boot Stock Recovery pressing Vol+ Vol- Power until you see Motorola Logo
If you continue pressing you will see a protect menu that you can not do anything and after goes to another screen: FTM MODE with IMEI informations.
Unfortunately Motorola Android Sooner Single Adb Interface driver is not loaded
This menu suggests FASTBOOT. Actually you can boot enox's CWM for Motoluxe XT615 like follow:
Your device must be ON (regular use)
adb reboot-bootloader
fastboot boot recovery.img
In this case you can see for a small time M. Sooner Single until booting CWM
Conclusion:
I believe you can boot Motoluxe CWM in XT682 If you flashed XT687 ROM 2_27D_2009 (ITD_V2.27D_A10_2009) because the hardware is almost the same and I can boot it in my XT687.

---

can somebody help me please? i used xt827 sbf with xt826. now i lost my imei, but i have the imei number. there's anyway to restore my it? (it's not my phone D: i'm feeling like crap right now)
thank you guys!

---

You can fix?
Junior voce conseguiu arrumar o XT682??? Estou com o mesmo problema com o meu..instalei da x=versao do XT687
romeci said:
ENGLISH VERSION
Hello friends from XDA,
Recently got the Droid X, Atrix tv model XT682 with 1 chip.
But it comes with android 2.3.7 gingerbread, being very limited.
So I looked for an update, although not official and the only update I found was for the brother Rom version of this handset with dual sim, TV XT687 Motorola Atrix.
Then realized the following:
* I downloaded all the necessary drivers to recognize the device from Motorla
* I downloaded version 6.1.4 of RSD LITE
* I downloaded the 4.0.4 ICS ROM for the link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
(I tested with the two available ITD_V2_27G_2009 and ITD_V2.27D_A10_2009)
I performed the update process by RSD Lite without problems, but after starting the phone the following occurs:
* This ROM is the XT687 which has 2 chips, it recognizes the chip 1 and even the 3g works with the rest of the ROM without problems, including the camera, but to make calls returns the error:
Mobile Network Not Available
Pictures as below:
So I decided to go back to his original ROM, I downloaded this same link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Tested with 3:
(ITV_151D_A09_2004_0504, ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504)
And after the process in RSD Lite shows PASS message and the machine the following error:
MBM Flash-mode.
IronMaxTV ICS
version: 01:06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Please help me to solve this problem, the device has not even been a week of use and I'm done with him without wanting wanting.
Thank you all.
=====================================================================
VERSÃO EM PORTUGUÊS - BRASIL
Olá amigos do XDA,
Obtive recentemente o aparelho da Motorola, Atrix tv modelo XT682 com 1 chip.
Porém o mesmo vem com o android 2.3.7 gingerbread, sendo muito limitado.
Então procurei por alguma atualização, mesmo que não oficial e o unico update que encontrei foi para a Rom do irmão deste aparelho na versão com dual sim, o Motorola Atrix Tv XT687.
Realizei então o seguinte procedimento:
* Baixei todos os drivers necessários para reconhecer o aparelho da motorla
* Baixei a versão 6.1.4 do RSD LITE
* Baixei a ROM 4.0.4 ICS pelo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
( sendo que testei as duas disponiveis ITD_V2_27G_2009 e ITD_V2.27D_A10_2009 )
Realizei o processo de update pelo RSD Lite sem problemas, porém após iniciar o celular ocorre o seguinte:
* Essa ROM é do XT687 que possui 2 chips, ele reconhece o chip 1 e até mesmo o 3g funciona com todo o resto da ROM sem problemas, inclusive a camera, porém ao efetuar ligações retorna o erro:
Rede Móvel Não Disponível
Conforme Imagens abaixo:
Então resolvi voltar para a ROM original dele, que baixei neste mesmo link:
http://www.droidevelopers.com/downloads.php?do=cat&id=102
* Testei com as 3:
( ITV_151D_A09_2004_0504 , ITV_151D_A04_2013_0504, ITV_151D_A07_2009_0504 )
E após o processo no RSD Lite, mostra a mensagem PASS e no aparelho o seguinte erro:
MBM Flash-Mode.
IronMaxTV ICS
version: 01.06
Your enter Flash mode because some error happens.
Please record the error code for your service provider.
Error code is 0201
Bootloader USB Init SECURE BOOT ENABLE
Por favor me ajudem a resolver este problema, o aparelho não tem nem uma semana de uso e já acabei com ele sem querer querendo.
Obrigado a todos.
Click to expand...
Click to collapse