[Q] Bricked MT6589 chipset model XYZ X1, please help!!! - Android Q&A, Help & Troubleshooting

Hello,
I just purchase an XYZ X1 through dealextreme. MT6589 quad-core.
One of the slots in the dual-sim not working, so I decided to try to fix it myself and install another ROM from SHUAME page app
I install MyUI ROM, but this comes with chinese KingUser instead of SuperUser, from that moment the phone cant recognize sdcard
When i try to start the phone pressing vol - to enter in recovery, this start in "FACTORY MODE" (all menus in chinese, y try to find any opyion for flashing but nothing) ... I do not know you play and do not understand Chinese, but from that moment the phone started to show colors and sounds, you remove the battery quickly.
I can not launch applications like Whatsapp, it does not recognize SD memory card.
The phone has limited functionality and only one SIM works. Only phone calls
I´m try every app for repair recovery, And now can launch CWM fromunclemobile, but sdcard is not recognize and cant flash.
Now, factory mode recovery still, and fastboot is not present.
If any could give me the original ROM or any way to fix the problem I would be very grateful.
Thanks in advance

yseku said:
Hello,
I just purchase an XYZ X1 through dealextreme. MT6589 quad-core.
One of the slots in the dual-sim not working, so I decided to try to fix it myself and install another ROM from SHUAME page app
I install MyUI ROM, but this comes with chinese KingUser instead of SuperUser, from that moment the phone cant recognize sdcard
When i try to start the phone pressing vol - to enter in recovery, this start in "FACTORY MODE" (all menus in chinese, y try to find any opyion for flashing but nothing) ... I do not know you play and do not understand Chinese, but from that moment the phone started to show colors and sounds, you remove the battery quickly.
I can not launch applications like Whatsapp, it does not recognize SD memory card.
The phone has limited functionality and only one SIM works. Only phone calls
I´m try every app for repair recovery, And now can launch CWM fromunclemobile, but sdcard is not recognize and cant flash.
Now, factory mode recovery still, and fastboot is not present.
If any could give me the original ROM or any way to fix the problem I would be very grateful.
Thanks in advance
Click to expand...
Click to collapse
do you still need the ROM?

tecno d9 mtk6582
ranillo said:
do you still need the ROM?
Click to expand...
Click to collapse
please help me with original stock ROM for my tecno d9....I flashed an incompatible custom ROM, it didn't work, the I restored my backedup ROM. after that sim management not working , invalid imei, radio off, sim not ready....any help?

iamsirwalid said:
please help me with original stock ROM for my tecno d9....I flashed an incompatible custom ROM, it didn't work, the I restored my backedup ROM. after that sim management not working , invalid imei, radio off, sim not ready....any help?
Click to expand...
Click to collapse
the stock rom is for xyz x1, not for tecno d9.

Related

Help!, Xperia U,URGENT!

Yesterday i tried to install this rom(http://forum.xda-developers.com/showthread.php?t=1889581 ,Xperia Fidelity JB v1.0 (JB) on my Xperia U ST25a, so i went to recovery and install it as normal and the install was succesfull,but when i turned on my phone again the wallpaper took a lot of time to load and they will apear a lot of windows on my phone saying"system UI has stopped working would you like to close it?",and a lot of crashes, so i tried to factory reset it and i did, but when i turned on again after the factory reset the phone will do the same, oh and the CMW recovery is gone, i cant connect it to the computer to install it again, it says "USB connectivity has crashed" and the worst part is that when i try to download an apk from internet it says that SD card is required to download the file(but xperia u doesn't have a SD slot!),now i cant remove the rom i installed and my recovery and notification bar are gone,and when someone is calling me the phone will just vibrate but it wont show the answer/deny screen, i just can send sms and call please help me with this,this is frustrating!
Federic321 said:
Yesterday i tried to install this rom(http://forum.xda-developers.com/showthread.php?t=1889581 ,Xperia Fidelity JB v1.0 (JB) on my Xperia U ST25a, so i went to recovery and install it as normal and the install was succesfull,but when i turned on my phone again the wallpaper took a lot of time to load and they will apear a lot of windows on my phone saying"system UI has stopped working would you like to close it?",and a lot of crashes, so i tried to factory reset it and i did, but when i turned on again after the factory reset the phone will do the same, oh and the CMW recovery is gone, i cant connect it to the computer to install it again, it says "USB connectivity has crashed" and the worst part is that when i try to download an apk from internet it says that SD card is required to download the file(but xperia u doesn't have a SD slot!),now i cant remove the rom i installed and my recovery and notification bar are gone,and when someone is calling me the phone will just vibrate but it wont show the answer/deny screen, i just can send sms and call please help me with this,this is frustrating!
Click to expand...
Click to collapse
that's weird... here's a possible workaround but you're gonna need another android phone or something else that you can bluetooth things over to your phone with. ok, so you still have root access hopefully. so first lets solve the recovery problem, download the latest apk you can find for rom manager of the internet, bluetooth it to your phone. install, through this install cwm recovery, now bluetooth a rom and gapps you know are stable to your phone, finally boot into CWM and install. hope this works!
blu422 said:
that's weird... here's a possible workaround but you're gonna need another android phone or something else that you can bluetooth things over to your phone with. ok, so you still have root access hopefully. so first lets solve the recovery problem, download the latest apk you can find for rom manager of the internet, bluetooth it to your phone. install, through this install cwm recovery, now bluetooth a rom and gapps you know are stable to your phone, finally boot into CWM and install. hope this works!
Click to expand...
Click to collapse
Yeah, i have root acces still and the playstore still works, i already have rom manager, when i enter the program it will tell me"SD card needs to be mounted before using rom manager" well, i just press ok and the program will work "properly"(i think) , so i go to the recovery setup option and i try to to install and i select CMW 3.x+ and it tells me that the operation has been succesfull now i try tp reboot into recovery and it wont work still

[Q] Bricked iMacwear SPARTA M7, needs stock rom

I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Did you manage to find a stock 4.4.2. ROM?
I'd need it as well cause my M7 came with 4.2.2 and i'd like to update it while I did not find any OTA update to the 4.4.2 release so far (don't know if OTA even works cause it says error connecting to the network even though it also says the system is uptodate).
Should you still need the stock 4.4 ROM, there are a couple of members in this thread http://forum.xda-developers.com/showthread.php?t=3089024 who got sent a 4.4 m7 firmware, you could try it out with a backup from them.
M7 flashing
Papi62 said:
I tried to flash my iMacwear SPARTA M7 Smart Watch Phone , 4 GB ROM, Android 4.4 OS, bought in April 2015. I did use http://forum.xda-developers.com/oma...rom-omate-truesmart-ironman-firmware-t2998434 for that.
SP Flash Tool worked fine until the final window Download Ok. After that I can not reboot or strat my watch.
I tried to solve this problem, using different Omate Roms with different scatter text files. Every time I removed battery plugged again for flashing. It goes OK , shows "Download DA 100%" in red bar. After some seconds comes error S_FT_ENABLE_DRAM_FAIL (4032). I tried formatting, downloading, memory test byt the result was the same.
I think I need iMacwear m7 original factory rom 4.4.2 for flashing.
Please help with rom or any tips to unbrick my device!
Click to expand...
Click to collapse
Hi,
I got X01 today...I would like to flash it ...but how to do it? How to switch the watch into flash mode? There is no volume buton as on ordinary mobile. And how to put the watch in recovery mode? Which button or how to switch the watch.
Thank you very much in advance for assistance..
Regards
Filik
I have a backup of stock room if neededfirst thing I did was take a nand backup

Unable to Flash Lenovo S939, all kind of processes stop

Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
when i try to flash roms in recovery...
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Lacerlacer said:
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
Click to expand...
Click to collapse
it seems like something to do with the error 1041. I failed to test the nand flash
It seems like something to do with the error 1041. I failed to run a dedicated memory test in SP tool. Anyone have any though?
Lacerlacer said:
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Click to expand...
Click to collapse

One year old LG L70 Dual Sim (D325f 0814) random system errors

Hi!
My girlfriend has an LG L70 Dual Sim (D325f 0814) phone. About one moth ago, the phone started suddenly restarting. After one restart this image showed in the screen. hZZZttZZZps://wwZZZw.dropZZZbox.com/s/teklp3uZZZpaz6f5mz/20170118_ZZZ194100.ZZZjpg?dl=0
I have never used other battery in the phone. (replace all triple ZZZ to nothing and you can have the correct link)
After that I tried a factory reset. But it did't helped. After the reset, the phone always shows me com.android.systemui has stopped error message. So i decide to install other room. I don't know, other ROM solve this problems, but I don't have any other idea. So Where can I find ROM for this phone? And how can I install it? I only need a working phone, i don't want android 5 or any costum things. The phone currently running Android 4.4.2 (kernel version 3.4.0+ build number KOT49I.A1464618841)
Please help!
Thanks.
Normally installing mods or messing with system causes this errors
Ultimate solution is reflash the ROM using stock ROM
You can download the ROM using google and flash it via stock recovery
This will solve your problems
Thanks for the answer The Hard Gamer. I install D32510F_00 firmware from csmgdl.lgmobile.com. The com.android.systemui message goes away. Now i wait for other system error messages.

Phone not turn on after flash rom

Hi guys i have problem with my Alcatel Idol 3 (6045y). I wanted to upgrade my phone to android 6.0. I downloaded rom from forum and installed TWRP recovery and flash rom. After this everything works fine, i restore factory settings. But 6.0 version dont have Polish language and i wanted root my phone again and add Polish language. But when i try install supersu something happens and my phone gets bootloop and now he dont want turn on. Please help me fix this.
/EDIT
Okey i know i have bricked phone. I tried install rom with Mobile Upgrade but in the end application have error "Read terminal information failed. Please check the phone status" Any sugestions what to do next?

Categories

Resources