this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.
Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9
Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zip" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.
Tested on my XT910S.
Regards from Argentina!:laugh:
hola, al telefono puede ponerse cualquier firm despues de hacer esto? Queda identico a un nuevo?
jmm18 said:
hola, al telefono puede ponerse cualquier firm despues de hacer esto? Queda identico a un nuevo?
Click to expand...
Click to collapse
You wont get much help posting in spanish in this community, this is a english only forum,but to answer your question, yes you will have a fresh stock rom and you can flash any firmware with an erased CID.
Sent from my XT910 using xda premium
AztekSoul said:
You wont get much help posting in spanish in this community, this is a english only forum,but to answer your question, yes you will have a fresh stock rom and you can flash any firmware with an erased CID.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks and sorry for spanish language
During flashing it keeps coming up with fail at the step 6. I have been redoing step 1 for several times, but no luck. Any advice?
I am booting with BT Tools option. Else it wont get inside, also shows Customer ID error.
Sent from my AUXUS Nuclea N1 using xda app-developers app
hi!
jmm18 said:
hola, al telefono puede ponerse cualquier firm despues de hacer esto? Queda identico a un nuevo?
Click to expand...
Click to collapse
si, despues de esto le puse el retail de brasil 4.1.2 y quedo de 10, eso si me costo rootearlo. Saludos
egons said:
During flashing it keeps coming up with fail at the step 6. I have been redoing step 1 for several times, but no luck. Any advice?
Click to expand...
Click to collapse
try whit another similar .bat file, and see if cid is deleted (this only work wiyh XT910S/K)
nijom said:
I am booting with BT Tools option. Else it wont get inside, also shows Customer ID error.
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
try a full wipe again, or do all again from step 1, without flash "ota"
One more tip...
kraven234 said:
this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.
Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9
Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zip" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.
Tested on my XT910S.
Regards from Argentina!:laugh:
Click to expand...
Click to collapse
Useful tip for whom are going to do this (Especially for whom live in Korea):
Removing CID without backup is no good choice. It's kinda emergency treatment.
If you don't need your phone right now or have enough time to visit any Motorola Service Center nearby your place, then go to there.
Even though servicing varies around service centers (it means some engineers don't know how to restore), Most engineers may restore your phone right at the time. They have fastboots for SKT and KT. (Because you HAVE your own CID at this time.) It costs around 8000 ~ 20000 KRW ( $8 ~ $20). But you may keep it safely.
Good luck with RAZR.
P.S. I wiped out my cid without backups.
nidev said:
Useful tip for whom are going to do this (Especially for whom live in Korea):
Removing CID without backup is no good choice. It's kinda emergency treatment.
If you don't need your phone right now or have enough time to visit any Motorola Service Center nearby your place, then go to there.
Even though servicing varies around service centers (it means some engineers don't know how to restore), Most engineers may restore your phone right at the time. They have fastboots for SKT and KT. (Because you HAVE your own CID at this time.) It costs around 8000 ~ 20000 KRW ( $8 ~ $20). But you may keep it safely.
Good luck with RAZR.
P.S. I wiped out my cid without backups.
Click to expand...
Click to collapse
I have deleted CID. Only fastboot working was 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RTFE1007.0R_USASPDRJBRTFR_P013_A014_p2b_S1FF_fb_CFC.xml. I am on 982.124.14.XT910.Retail.en.FR version now. What am I supposed to do now? Any advice?
Customer ID error
Hi, in my case this unfortunatelly resulted in Customer ID error. Whats more, i am not able to get to boot menu any more.
kraven234 said:
this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.
Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9
Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zip" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.
Tested on my XT910S.
Regards from Argentina!:laugh:
Click to expand...
Click to collapse
Guys I am completely desperate!
I have softbricked my XT910S Korean version and right now I was hoping to follow this instructions to recover the device but whatever I do I cant succeed.
I tried to remove CID but it always says "erasing 'cid' ... INFOcommand restricted failed" the rest OK
Next thing I tried all possible firmwares including SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip but it just fails on step 6 flashing fail.
Please help or show me the rest direction how to get it done otherwise I'm gonna go insane. I have all installed drivers, cable, battery is charged and charging. (I am able to charge the phone but it dies very quickly which is strange.
IF you could please help with providing link to correct version of firmware. I'm not sure even how to check which firmware is correct for my phone.
Your help is really appreciated.
kraven234 said:
this community help me a lot and it is my time to help.
Its works whit XT910 Korean Retail (S/K).
It is my first post so i can not post links, so remove spaces.
Extract from here: xt910ks.blogspot.com.ar
Archives:
Motorola Drivers and RSD >5.9 : No links,please google
Tool erase the CID & Root: w w w .me diafire .com/?6e1prdc0cq6eraq
Firmware 4.0.4: w w w .droi deve lop ers.com/dow nloads.php?do =file&id=1407 (need free register)
Update: www .med iafire .com/?7s2e953kuka1xa9
Step 1: Erase CID
Put XT910 in Fastboot Mode: Volume up + Volume down + Power
Press volume down to Fastboot and then volume up to select
Conect to pc and install drivers
Decompress "Xoa CID & Root.rar", Find "Xoa CID" folder and double click on "run.bat" and the others 3 .bat files
Step 2: FLash Firmware
Put in Fastboot again, open RSD Lite annd select "SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip" archive (firmware 4.0.4)
if the flash process fails means that CID is not deleted, back to step 1
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
wait boot correctly, aprox 1~2 min
Put the update in SD Card, and turn off
Boot in recovery mode: Volume down+volume up+Power, and select recovery
When appear Android logo press volume up+ volume down quickly,
Do a full wipe
select install zip from sd card, and select "Blur_Version.673.94.328.XT910.AsiaRetail.en.03.zip" archive.
wait to terminate
Full wipe again
Reboot and select BP tools again
Step 3 Fix Boot + Mass Storage:
Activate "USB Debugging" and plug to pc, find the root folder from "Xoa CID & Root.rar" archive and extract,
then run "EasyRootICS_Windows.bat"
cellphone will reboot 3 time, remember to boot in "BP Tools" always,
when done, run EasyRootICS_Apps.bat to install apps
in Cellphon Run Boot Menu Manager, install Hjihack, in 1st system turn on the first 2 items,
now restart, and after 3 seconds the cellphone will pass costumer id error and boot properly.
Tested on my XT910S.
Regards from Argentina!:laugh:
Click to expand...
Click to collapse
Hola amigo, yo intento borrar el CID pero me dice FAILED en cualquiera de los cuatro, no existe otra maner, porque ni siquiera puedo entrar a modo fastboot en mi teléfono, gracias
guyz plz i need this file ..plz somebody upload this SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIG NED.xml.zip
BaCkkk said:
guyz plz i need this file ..plz somebody upload this SPYDERIRD_U.01.6.7.3-94_SPI-324_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIG NED.xml.zip
Click to expand...
Click to collapse
Here you go:
Code:
ht tp://sbf.droid-developers.org/download.php?device=10&file=262
how to install hi jack
Thanks a ton!
Sorry for the awkward bump but mate, I could freaking kiss you right now! Thanks a ton! Worked like a charm!
Those who are having problem installing HiJack : Get the updated version of BootMenu Manager from Playstore, install it, grant it root permission, run it and run the installer. After that reboot, wait for a few seconds, and viola!
Once again, thanks a lot!
Thanks
Thanks a bunch!!
Probably the best guide for all Korean XT910's
Works totally fine revived my bricked XT910K using this guide :good:
meher said:
Thanks a bunch!!
Probably the best guide for all Korean XT910's
Works totally fine revived my bricked XT910K using this guide :good:
Click to expand...
Click to collapse
Sorry for off topic, but since you are from India too, did you buy the phone from eBay as well? And are you noticing yellow watermarks on the screen? (There is a number in the middle and two yellow boxes at the bottom)
Sorry to revive an old thread, I'm having this issue with erasing the cid. Anyone know what I can do from here?
xt910k model btw
sending 'mbm' (512 KB)... OKAY [ 0.031s]
writing 'mbm'... OKAY [ 0.484s]
sending 'mbm' (512 KB)... OKAY [ 0.296s]
writing 'mbm'... OKAY [ 0.484s]
finished. total time: 0.780s
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.281s
erasing 'userdata'... OKAY [ 0.937s]
erasing 'cache'... OKAY [ 0.876s]
finished. total time: 1.813s
cid: 5
finished. total time: -0.000s
Press any key to continue . . .
Click to expand...
Click to collapse
New link download
Several people have been looking for the asian rom, so here it is
motofirmware . com/files/download/237-spyderird-u01673-94-spi-324-041101p-0a74-asia-retail-hktw-cfc-hwp2b-signedxmlzip
Just delete the spaces and done.
Related
Hi,
I'm new here, I searched the forum but didn't find answers.
I have a rooted HTC Legend with CM 7, but I'm trying to understand the logic behind the rooting process.
The main questions are:
1. (Correct me if I'm wrong) I noticed that "step1-windows.bat" script is flashing a testimage.zip, which appears to be a RUU 1.31 (with rooted recovery).
In this case, If it installs RUU 1.31, why do you have to install the RUU_Legend_HTC_WWE_1.31....exe before that?
2. Why do you need to install HTCSync 2.0.33 (Old version) instead of the new HTCSync before the actual rooting process?
3. When I have a 2.1 un-rooted device with 0.43 HBOOT, can I follow the "Already OTA updated with HBOOT 1.00" section of the following guide, to root the phone instead of the regular method?
(I know it says "Already OTA updated with HBOOT 1.00", but I thought to myself that if it works with HBOOT 1.0, why shouldn't it work with HBOOT 0.43)
Many thanks
I un-rooted my phone, and then I managed to root my phone without using the RUU 1.31 exe, and without using step2-windows.bat...
then I used a fake flash CWM recovery to flash CM7 rom (so I didn't even need to install htcsync 2, because the phone wasn't connected to the computer at this point) (p.s. in this whole process I didn't use a GC and it worked just fine, maybe because I didn't run the RUU exe?)
anyway, I'm confused.. why advanced users wrote in all the root guides to install the ruu 1.31 exe, and running step2-windows.bat if it wasn't necessary?
I'm the only one replying to this post
Anyway, here are the steps I did to root my phone successfully: (In my opinion it's easier than the regular methods)
1. Verify the newest HTCSync is installed on your computer (http://www.htc.com/uk/SupportDownload.aspx?p_id=313&cat=3&dl_id=1073)
2. Connect your phone to the computer as a removable storage
3. Go to Settings->Applications->Development , and verify “USB debugging” is checked
4. Download the fake flash and put it on your SD card (http://www.mediafire.com/?jtzjvxjemzx)
5. Download a Custom ROM of your choice and put in on your SD card (Recommended is CM7: http://download.cyanogenmod.com/get/update-cm-7.0.0-Legend-signed.zip)
6. Download and UnRAR rooting tools to C:\root (http://www.megaupload.com/?d=UZBQOFKM)
7. Open CMD on your computer (Start Menu->Run->CMD) and run the following:
a. c: & cd\root & crackin.bat
8. After it’s done verify you see the following line: “crwxrwxrwx … /dev/mtd/mtd0”
(If you don’t – try to re-run the command)
9. Turn off your phone and turn it on by pressing the “power” button combined with the “back” button
(Verify you see on a “Fastboot” line with red background)
10. Open CMD on your computer (Start Menu->Run->CMD) and run the following:
a. c: & cd\root & step1-windows.bat
11. Once the phone is back up – unplug your phone from your computer
12. Navigate using the volume buttons to “BOOTLOADER” and select it by pressing the “power” button, then navigate to “RECOVERY” and select it the same way
13. Once in recovery (black background with red triangle), press “volume-up” button combined with the “power” button, and then navigate using the volume buttons to “Apply sdcard:update.zip” and select it by pressing the “power” button
14. You should see a new menu – use the optical touch button to navigate and press it to select the following:
a. wipe data/factory reset
a. wipe cache partition
15. Use the optical touch button to navigate and press it to select “install zip from sdcard”:
b. Select “choose zip from sdcard” and then select the custom ROM you’ve placed on the sdcard
16. Use the “power” button to go back, and select “reboot system now”
(Did all the above without a GC in my phone - and I have a branded phone)
It would be great if some experts could comment on it thanks
Great tutorial ! But......................
I almost got it to work but on the recovery screen, apply sdcard:update.zip
i get
................
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation Aborted
HBoot 0.43.0001 , android 2.1update-1
Got it working , i did have to downgrade to 2.1 and i used this tutorial http://forum.xda-developers.com/showthread.php?t=823625
zerodi said:
Great tutorial ! But......................
I almost got it to work but on the recovery screen, apply sdcard:update.zip
i get
................
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation Aborted
HBoot 0.43.0001 , android 2.1update-1
Got it working , i did have to downgrade to 2.1 and i used this tutorial http://forum.xda-developers.com/showthread.php?t=823625
Click to expand...
Click to collapse
Hi,
Thanks for the feedback.
Running cracking.bat and step1 have worked?
[Cause I think I got this error only when I tried to run the update.zip without doing step1 (Which I think is responsible for rooting the recovery)]
and what do you mean by downgrade to 2.1? Did you mean running the 1.31 RUU?
i have been trying to root my phone for about 3 days now . i have so many damn files and pages and websites going i am NOW totally confused .
who on these boards has an easy to understand step 1 through whatever to ROOTED tutorial ?
please i am begging for this !
Cheers
below didnt work for me ..
I never get this
After it’s done verify you see the following line: “crwxrwxrwx … /dev/mtd/mtd0”
failed over and over again .
I'm the only one replying to this post
Anyway, here are the steps I did to root my phone successfully: (In my opinion it's easier than the regular methods)
1. Verify the newest HTCSync is installed on your computer (http://www.htc.com/uk/SupportDownloa...t=3&dl_id=1073)
2. Connect your phone to the computer as a removable storage
3. Go to Settings->Applications->Development , and verify “USB debugging” is checked
4. Download the fake flash and put it on your SD card (http://www.mediafire.com/?jtzjvxjemzx)
5. Download a Custom ROM of your choice and put in on your SD card (Recommended is CM7: http://download.cyanogenmod.com/get/...end-signed.zip)
6. Download and UnRAR rooting tools to C:\root (http://www.megaupload.com/?d=UZBQOFKM)
7. Open CMD on your computer (Start Menu->Run->CMD) and run the following:
a. c: & cd\root & crackin.bat
8. After it’s done verify you see the following line: “crwxrwxrwx … /dev/mtd/mtd0”
(If you don’t – try to re-run the command)
9. Turn off your phone and turn it on by pressing the “power” button combined with the “back” button
(Verify you see on a “Fastboot” line with red background)
10. Open CMD on your computer (Start Menu->Run->CMD) and run the following:
a. c: & cd\root & step1-windows.bat
11. Once the phone is back up – unplug your phone from your computer
12. Navigate using the volume buttons to “BOOTLOADER” and select it by pressing the “power” button, then navigate to “RECOVERY” and select it the same way
13. Once in recovery (black background with red triangle), press “volume-up” button combined with the “power” button, and then navigate using the volume buttons to “Apply sdcard:update.zip” and select it by pressing the “power” button
14. You should see a new menu – use the optical touch button to navigate and press it to select the following:
a. wipe data/factory reset
a. wipe cache partition
15. Use the optical touch button to navigate and press it to select “install zip from sdcard”:
b. Select “choose zip from sdcard” and then select the custom ROM you’ve placed on the sdcard
16. Use the “power” button to go back, and select “reboot system now”
(Did all the above without a GC in my phone - and I have a branded phone)
It would be great if some experts could comment on it thanks
Click to expand...
Click to collapse
Timothye said:
I never get this
After it’s done verify you see the following line: “crwxrwxrwx … /dev/mtd/mtd0”
failed over and over again .
Click to expand...
Click to collapse
Same questions over and over...
You ain't gonna get this, cause your Legend is running HBOOT > 1.XX
You need use VISIONary and temproot: http://forum.xda-developers.com/showpost.php?p=11863394&postcount=2
Still, I agree that all the info on how to root the Legend is a bit fragmented.
zerodi said:
Great tutorial ! But......................
I almost got it to work but on the recovery screen, apply sdcard:update.zip
i get
................
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation Aborted
HBoot 0.43.0001 , android 2.1update-1
Got it working , i did have to downgrade to 2.1 and i used this tutorial http://forum.xda-developers.com/showthread.php?t=823625
Click to expand...
Click to collapse
Did you run step1-windows.bat with a GoldCard in your phone?
Because I've found that only phones with the following CIDs won't need a GC (I have K18 and that's why I didn't need a GC):
cidnum: HTC__032
cidnum: HTC__A07
cidnum: HTC__K18
cidnum: HTC__N34
cidnum: HTC__Y13
cyRq said:
Same questions over and over...
You ain't gonna get this, cause your Legend is running HBOOT > 1.XX
You need use VISIONary and temproot: http://forum.xda-developers.com/showpost.php?p=11863394&postcount=2
Still, I agree that all the info on how to root the Legend is a bit fragmented.
Click to expand...
Click to collapse
ok im a totally new to this stuff ,please be patient ...
now this morning i am "STILL " trying to root my phone .
installed VISIONary+ , made a temp root , lost on reboot . got permanent root . but again seems to be lost when opening clockworkmod , " must root your phone" or some message like this .i dont remember exactly the words .
i have superUser
i have clockworkmod install
VISIONary+
everytime i try to run the update i receive the error . Signature failed .
am i doing this correct .
im trying to install CM 7 from clockwork mod . in recovery mode i think you guys are calling it .
then i get "Signature failed" .
Any help .
Cheers
Never tried the method posted in this topic, and I I'm assuming that's what you're trying. Have you created a goldcard? Is you're Legend branded?
Do a search and you'll find all the info you need.
Sent from my HTC Legend using XDA Premium App
I got a big problem ! I brought another Legend,
On the Fastboot screen or the Hboot screen the Volume and power buttons do nothing, i cant select recoervy !! Oh lala
What can i do, i cant get into anything,
S-on
Hboot-0.43.0001
Microp-0816
touch panel-syn07_0105
radio 7.08.35.21
feb 18 2010
zerodi said:
I got a big problem ! I brought another Legend,
On the Fastboot screen or the Hboot screen the Volume and power buttons do nothing, i cant select recoervy !! Oh lala
What can i do, i cant get into anything,
S-on
Hboot-0.43.0001
Microp-0816
touch panel-syn07_0105
radio 7.08.35.21
feb 18 2010
Click to expand...
Click to collapse
Until you get this fixed, on CM (which your signature implies you have) when you reboot the device you can choose normal/bootloader/recovery.
Or you can always connect the mobile to your comp, and with adb issue the following:
adb reboot [bootloader|recovery]
amoskas said:
Until you get this fixed, on CM (which your signature implies you have) when you reboot the device you can choose normal/bootloader/recovery.
Or you can always connect the mobile to your comp, and with adb issue the following:
adb reboot [bootloader|recovery]
Click to expand...
Click to collapse
Sorry my SIG points to my other legend that is working fine, the question above is for another legend i purchased hehe
ill try the adb boot to recovery i have the update.zip on the sdcard but i have no idea if the unit is rooted or not - thats a problem
what happens if i put LEGEIMG.zip on the sdcard ? - scratch that thats for unrooting isnt it......
ok so i tried - adb reboot [bootloader|recovery]
exactly as and it errors, could you tell me what the correct ADB command is for booting to recovery?
Im in HBoot or Fastboot when i issue this command ??
thanks
Thanks for the help
Edit :-
Under Fastboot, my device is listed in the CMD, can i reboot to recovery from fastboot usb ??
zerodi said:
Sorry my SIG points to my other legend that is working fine, the question above is for another legend i purchased hehe
ill try the adb boot to recovery i have the update.zip on the sdcard but i have no idea if the unit is rooted or not - thats a problem
what happens if i put LEGEIMG.zip on the sdcard ? - scratch that thats for unrooting isnt it......
ok so i tried - adb reboot [bootloader|recovery]
exactly as and it errors, could you tell me what the correct ADB command is for booting to recovery?
Im in HBoot or Fastboot when i issue this command ??
thanks
Thanks for the help
Edit :-
Under Fastboot, my device is listed in the CMD, can i reboot to recovery from fastboot usb ??
Click to expand...
Click to collapse
What "adb reboot [bootloader|recovery]" means is:
adb reboot (to normally reboot the phone)
or
adb reboot bootloader (to reboot into bootloader mode)
or
adb reboot recovery (to reboot into recovery mode)
The [] is "optional arguments" and the | is "or" (it's the standard way of writing commands and options in computers)
About LEGEIMG.zip method - it's a way to flash RUU ROMs, so it's not related to your problem.
About the update.zip you have on your sdcard, it's for the recovery menu? (Blayo's fake flash) because if so, I think when you're in recovery you'll need "vol up" + "power" to choose the update.zip, and that means that you're in trouble...
So you can: repair the volume buttons -or- SOFF your phone and then you'll be able to flash a CWM recovery (and you wouldn't need the update.zip anymore) -or- wait for someone else to post more ways to bypass the volume buttons usage.
amoskas said:
What "adb reboot [bootloader|recovery]" means is:
adb reboot (to normally reboot the phone)
or
adb reboot bootloader (to reboot into bootloader mode)
or
adb reboot recovery (to reboot into recovery mode)
The [] is "optional arguments" and the | is "or" (it's the standard way of writing commands and options in computers)
About LEGEIMG.zip method - it's a way to flash RUU ROMs, so it's not related to your problem.
About the update.zip you have on your sdcard, it's for the recovery menu? (Blayo's fake flash) because if so, I think when you're in recovery you'll need "vol up" + "power" to choose the update.zip, and that means that you're in trouble...
So you can: repair the volume buttons -or- SOFF your phone and then you'll be able to flash a CWM recovery (and you wouldn't need the update.zip anymore) -or- wait for someone else to post more ways to bypass the volume buttons usage.
Click to expand...
Click to collapse
Edit :- For S-Off you need to rooted and i have no way of checking on this new legend im rooted because im completely stuck on the hboot and fastboot screen
oh lala what a mess
Adb Hboot isnt detected the device - adb devices so , adb reboot recovery isnt working
fastboot devices is ok - is there any way to reboot to recovery from fastboot, ? i checked the options but cant find a way
shall i just s-off and see what happens ?? lol
Or can i use LEGEIMG.zip method - i just want to get the phone bootedd into any OS i dont really care if its rooted or not at this stage
----------------------
I get a Error with LEGEIMG.zip 1.31 and 2.03
Says :-
Main Version is Older
update failed
... Is this because maybe the phone is already on eclair 2.1 and 0.43 hboot ??
zerodi said:
Edit :- For S-Off you need to rooted and i have no way of checking on this new legend im rooted because im completely stuck on the hboot and fastboot screen
oh lala what a mess
Adb Hboot isnt detected the device - adb devices so , adb reboot recovery isnt working
fastboot devices is ok - is there any way to reboot to recovery from fastboot, ? i checked the options but cant find a way
shall i just s-off and see what happens ?? lol
Or can i use LEGEIMG.zip method - i just want to get the phone bootedd into any OS i dont really care if its rooted or not at this stage
----------------------
I get a Error with LEGEIMG.zip 1.31 and 2.03
Says :-
Main Version is Older
update failed
... Is this because maybe the phone is already on eclair 2.1 and 0.43 hboot ??
Click to expand...
Click to collapse
Wait, you're saying that the phone o/s can't start? what happens when you start it normally?
If the phone doesn't start in normal mode, maybe you can reset to factory settings by running in fastboot mode:
fastboot erase userdata
amoskas said:
Wait, you're saying that the phone o/s can't start? what happens when you start it normally?
If the phone doesn't start in normal mode, maybe you can reset to factory settings by running in fastboot mode:
fastboot erase userdata
Click to expand...
Click to collapse
Yes the phone doesnt start , if we press the power button it goes stright to the fastboot screen - i dont think theres any OS on there:-(
ill try what u said, thanks
edit :- cmd/ erasing 'userdata' .... FAILED (remote: not allowed)
sorry if im hijacking your thread! shall i start a new topic i really need help on this -
just to sum it all up
----
The phone will not power into a O/S
Pressing power boots into Fastboot - No volume keys working
Pressing power + Vol Down boots into HBoot - No volume keys working
Pressing power + Vol Up boots into fastboot - No volume keys working
----
All LEGEIMG.zip's Fail - Main Version is older / or / Parsing SD ZIP , nothing happens
Fastboot commands
Devices - ok
other commands - erasing 'userdata' .... FAILED (remote: not allowed)
flash update.zip - unknown partition - cannot determine image filename
flash cwm-recovery-3024.img - unknown partition - cannot determine image filename
ADB Commands
Devices - no devices found - nothing
---
Really stuck here guys
Hi guy,
First, sorry for my bad english, I'm french.
Secondly, I talk with a small community and we trying to root the OT 5020x on Jelly Bean 4.1.
How to root this phone ?
See you and thanks for all!
Up
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be Sure To Click Dat THANKS Button If I Helped!
Sent from my GT-I9100 using xda premium
Bonjour
J'ai suivi ce poste (procedure un peu longue) et tout c'est bien passé pour moi (One touch m'pop de chez free: rooté ).
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Cordialement.
PS: Il faut etre bien rigoureux sur les etapes de cette procedure. Je ne peux etre tenu pour responsable en cas de brickage du telephone.
Ronny927, in the page //clockworkmod. com/rommanager isn't the rom for the alcatel m'pop. Can you upload a .zip file for this phone please?
Lucien, if you understand me.... xd, can you upload your .img file? I can't get the recovery file with the sp flash tool
Sorry for my english, i am spanish
I don't see rom for alcatel here, maybe there is another way for this but i just can't get around it.
Anyways, i spend some time searching, and came up on some french forum, some guy said he rooted his m'pop using this method.
(Since i'm new user i cannot post outside links)
pastebin-com-c6gwDsbk
(replace "-" with "." and "/" )
This was translated with google translate so it might have some mistakes. For people speaking french, here's the full post in french.
pastebin-com-E8KaP0tZ
Can anyone confirm this procedure is working ? I am still not comfortable playing with my phone regarding this, because i'm still noob about these things. If anyone can try this method and share your opinions i'd be grateful.
Yeah! That link was really usefull, the french guy's procedure works perfect!
kiroga123 said:
Yeah! That link was really usefull, the french guy's procedure works perfect!
Click to expand...
Click to collapse
I'm glad it worked out for you. However i did tried this method, but with no success. After step 17 - flash from sd card zip, it says error installing, or something. Tried for 6-7 times but with no success .
I made a rar with all necesary here is inside are the instructions in a .txt, (I should clarify that I have not tried yet), comment if it works.
Replace the %2A... in the url with a d f .l y without spaces and then click ok skip ads Sorry for my bad english
leonardv128 said:
I made a rar with all necesary here is inside are the instructions in a .txt, (I should clarify that I have not tried yet), comment if it works.
Replace the %2A... in the url with a d f .l y without spaces and then click ok skip ads Sorry for my bad english
Click to expand...
Click to collapse
THANK YOU!!!!!!!!
1. With your Files we need just the step #8 from this HowTo
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
2. After that we need to install the SU as zip-File (f.e. http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5) in recovery mode (After Volume Up + Power -> install zip)
Done!
echoffs said:
I'm glad it worked out for you. However i did tried this method, but with no success. After step 17 - flash from sd card zip, it says error installing, or something. Tried for 6-7 times but with no success .
Click to expand...
Click to collapse
Code:
[URL="http://www.phonandroid.com/forum/root-rooter-le-alcatel-one-touch-m-pop-t57072.html"][B][SIZE="5"]Here is a procedure[/SIZE][/B][/URL] for the Alcatel one touch rooter m'pop 5020x from home free
File download
[url]http://www.alcatelonetouch.com/uk/support/faq/one_touch_upgrade.html[/url]
One Touch Upgrade S 2.8.0
[url]http://www.alcatelonetouch.com/fr/[/url] [...]-setup.exe
SP FlashTool
[url]http://dl.free.fr/mOx6zdo3z[/url]
Recovery changes
[url]http://dl.free.fr/k1jmZR4Dx[/url]
Stock ROM
[url]http://dl.free.fr/rOq9NslEn[/url]
Scatter file
[url]http://dl.free.fr/npp9eiiVj[/url]
- On the phone to enable USB debugging mode (in "Settings" - "About phone" - "Advanced Settings" - "USB debugging")
- Connect the phone on USB.
- Install the ADB driver with the file loaded "One Touch Upgrade 2.8.0 S" (installed software only if you go to the end of the installation process will put your phone in factory)
- Check that is well recognized in the device manager as "Android Phone" - "Alcatel Android ADB Interface"
- Disconnect the phone and turn it off.
- Launch SP FlashTool
- In unguled "Download" under "Scatter-loading File" select the scatter file you loaded
- In the section below, check ONLY the "RECOVERY" check box (uncheck the other if there has checked and select
the "Recovery .... img" file you loaded by clicking the "RECOVERY" next to the box. (I do not know if I'm clear of??)
- Click on Download (note use the "download" button and especially not "Firmware -> Upgrade")
- A window appears informing you that going the whole picture is not loading correctly. this is normal click "YES" or "OK"
- Connect the phone "extinguished"
- Wait for a new small window with a green ring tells you "Download OK" appears
.
- Normally all these well.
- Disconnect the phone (remove the battery)
- The restart by pressing the start button and still pressing "vol +" until the appearance of
selection menu "recovery" "fastboot" "" normal. "go to recovery with the" Flight + "and pressing" vol-"
- Voila, your phone is Roote, it remains only to install a zip or SU Play store.
I did the whole procedure from the dump of my rom and everything went well.
I give this procedure for information. If your phone does not restart after the operation, I would not be held responsible.
[email protected] said:
Code:
[URL="http://www.phonandroid.com/forum/root-rooter-le-alcatel-one-touch-m-pop-t57072.html"][B][SIZE="5"]Here is a procedure[/SIZE][/B][/URL] for the Alcatel one touch rooter m'pop 5020x from home free
File download
[url]http://www.alcatelonetouch.com/uk/support/faq/one_touch_upgrade.html[/url]
One Touch Upgrade S 2.8.0
[url]http://www.alcatelonetouch.com/fr/[/url] [...]-setup.exe
SP FlashTool
[url]http://dl.free.fr/mOx6zdo3z[/url]
Recovery changes
[url]http://dl.free.fr/k1jmZR4Dx[/url]
Stock ROM
[url]http://dl.free.fr/rOq9NslEn[/url]
Scatter file
[url]http://dl.free.fr/npp9eiiVj[/url]
- On the phone to enable USB debugging mode (in "Settings" - "About phone" - "Advanced Settings" - "USB debugging")
- Connect the phone on USB.
- Install the ADB driver with the file loaded "One Touch Upgrade 2.8.0 S" (installed software only if you go to the end of the installation process will put your phone in factory)
- Check that is well recognized in the device manager as "Android Phone" - "Alcatel Android ADB Interface"
- Disconnect the phone and turn it off.
- Launch SP FlashTool
- In unguled "Download" under "Scatter-loading File" select the scatter file you loaded
- In the section below, check ONLY the "RECOVERY" check box (uncheck the other if there has checked and select
the "Recovery .... img" file you loaded by clicking the "RECOVERY" next to the box. (I do not know if I'm clear of??)
- Click on Download (note use the "download" button and especially not "Firmware -> Upgrade")
- A window appears informing you that going the whole picture is not loading correctly. this is normal click "YES" or "OK"
- Connect the phone "extinguished"
- Wait for a new small window with a green ring tells you "Download OK" appears
.
- Normally all these well.
- Disconnect the phone (remove the battery)
- The restart by pressing the start button and still pressing "vol +" until the appearance of
selection menu "recovery" "fastboot" "" normal. "go to recovery with the" Flight + "and pressing" vol-"
- Voila, your phone is Roote, it remains only to install a zip or SU Play store.
I did the whole procedure from the dump of my rom and everything went well.
I give this procedure for information. If your phone does not restart after the operation, I would not be held responsible.
Click to expand...
Click to collapse
Does anyone if this method works for the Alcatel OT 5020A???
It works for OT-5020A
Plz Help
dm.homelinux.com said:
THANK YOU!!!!!!!!
1. With your Files we need just the step #8 from this HowTo
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
2. After that we need to install the SU as zip-File (f.e. http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5) in recovery mode (After Volume Up + Power -> install zip)
Done!
Click to expand...
Click to collapse
PLz sir i am a noob user of alcatel 5020D M'pop i Have done all the steps in the txt files but i dont under stand any thing from the 2 steps u added to the how to
plz help
now i can acces recovery mode but i cant get the SU.zip to install it
Hesham11 said:
PLz sir i am a noob user of alcatel 5020D M'pop i Have done all the steps in the txt files but i dont under stand any thing from the 2 steps u added to the how to
plz help
now i can acces recovery mode but i cant get the SU.zip to install it
Click to expand...
Click to collapse
Follow the procedure at the begining of the thread. Or download the full package with instructions. There's no problem with it. The most important thing is that your PC recognizes your 5020 as it said.
AlexGardunio said:
Follow the procedure at the begining of the thread. Or download the full package with instructions. There's no problem with it. The most important thing is that your PC recognizes your 5020 as it said.
Click to expand...
Click to collapse
I'm really sorry but i didnt get which thread do u mean the one with scatter file (i dont get a word out of it)
Or the thread i quoted
The pc recognized my alcatel after sevral tries but it did recognize it).
Can u copy for me what should i do next
Thanks in advance
Hesham11 said:
I'm really sorry but i didnt get which thread do u mean the one with scatter file (i dont get a word out of it)
Or the thread i quoted
The pc recognized my alcatel after sevral tries but it did recognize it).
Can u copy for me what should i do next
Thanks in advance
Click to expand...
Click to collapse
Hi my friend. I refer to the procedure in this thead. I've failed doing it because my pc didn't recognize my phone exactly as it should. In the exact moment it recognizes my phone everything worked as it should and I got my phone root and all. Any doubt, please let me know.
AlexGardunio said:
Hi my friend. I refer to the procedure in this thead. I've failed doing it because my pc didn't recognize my phone exactly as it should. In the exact moment it recognizes my phone everything worked as it should and I got my phone root and all. Any doubt, please let me know.
Click to expand...
Click to collapse
Ok now i will sound really stupid but i am sorry i really cant proceed.
Look now the device completely recognizes my alcatel 5020D can u copy for me which procedures should i follow next ??
(i managed to open the recovery mood but i dont know what to do next)
sorry for being a troublesome
I just came across this thread. I own the Alcatel One Touch Evolve 5020N on MetroPCS. I haven't activated it. I'm going to give 5 of 'em to my children for use as Wi-Fi only music and game players. I was wondering if you'd can be used for my phones do they will have CWM? I followed directions I found on rooting, so that's out of the way, just need a recovery. Thanks.
Sent from my LG-MS770 using Tapatalk
Hesham11 said:
Ok now i will sound really stupid but i am sorry i really cant proceed.
Look now the device completely recognizes my alcatel 5020D can u copy for me which procedures should i follow next ??
(i managed to open the recovery mood but i dont know what to do next)
sorry for being a troublesome
Click to expand...
Click to collapse
Take it easy my friend, we all suffer this kind of stuff and this Alcatel OT isn't a piece of cake hehe. Download this link and besides the files you'll find a tutorial with the easiest way to root and all your phone. I've been surfing and I think it's the clearest way for you to follow. I've tried it and works perfectly.
https://mega.co.nz/#!R0IEyCKI!YhnPpE6Hfim2Kbrrbk5OITO8npQP3B8Qw5eEtWm7Gyc
I was trying many ways to root my Lenovo Vibe B
but didn't work
if someone knows a way to do that please help me
There is currently no way to root it with twrp + supersu or any other open-source project. A Google search indicates that the application "King Root" does the job, though I would not trust it. There are twr and supersup builds for similar models, you could get one of those and try to build for your phone. That being said twrp is a complete mess of a project, documentation is simply nonexistant or in the form of poorly written "tutorials" in this forum, and supersu seems to be organized in this mess of a forum so I'm not sure I'd trust them either.
Danilo Pereira said:
I was trying many ways to root my Lenovo Vibe B
but didn't work
if someone knows a way to do that please help me
Click to expand...
Click to collapse
Hey, do you speak spanish? I've rooted my Vibe B (A2016b30 model), where did you bought yours? Maybe the files I have could work, also I have a PDF step-by-step tutorial, but is in spanish. It worked great.
Subvader12 said:
Hey, do you speak spanish? I've rooted my Vibe B (A2016b30 model), where did you bought yours? Maybe the files I have could work, also I have a PDF step-by-step tutorial, but is in spanish. It worked great.
Click to expand...
Click to collapse
hola, yo necesito también el tutorial, he intentado con varios y no me ha funcionado. dónde lo podemos encontrar?
I found this on Youtube, it looks like it involves flashing a hacked bootloader (although it seems to be for the dual SIM version) https://www.youtube.com/watch?v=8aLpy1qbn8s
I've done a Google translation on the instructions:
In the cell phone:
1. Activate the "Programmer Options" menu in "Settings / About Device / Build Number". (Press 7 times until the message "No need, you're a programmer.
2. Enable the "OEM Unlock" and "USB Debugging" options in "Settings / Programmer Options".
In the PC:
1. Connect the cell phone to the PC.
2. Install the file "Lenovo_USB_Driver_1.1.34_Setup.exe".
3. Open the "ADB_START.exe" file that is inside the "ADB" folder, a console will open.
4. The phone will display a message, just select the "Always allow from this computer" box and "OK".
5. Type: adb devices, it will display a list of connected devices.
6. Type: adb reboot-bootloader (The cell phone will display a small message)
7. Write: fastboot oem unlock (In the phone it will show a small menu in which you have to select "yes" with the "volume +" key)
8. Write: fastboot flash boot boot.img (Once the startup flashing is finished, the battery will have to be removed from the phone for 3 seconds and then re-set to restart the phone)
9. The cell phone will be returned to its initial factory state so the first Android startup will have to be configured and connected to the PC to copy the file "SR4-SuperSU-v2.78-SR4.zip" to the internal memory of the And then turn off the phone.
10. Turn on the cell phone by pressing the "volume +" key and the "power" key in "FASTBOOT" mode (Selecting with "volume +" and accepting with "volume -
11. Write: fastboot flash recovery recovery.img (On the screen of the cell should appear something like this: "USB Transferring ... USB Transmission OK Time: XXXXms Ve1: 10154KB / s")
12. Once the process is finished, remove the battery, replace it and switch on the cell phone by pressing the "+" key and the "power" key in the "RECOVERY" mode (selecting with "volume +" and accepting with "volume - )
13. Start the TWRP, select the "Never show this screen during boot again" box, select the corresponding language and slide the blue bar at the bottom.
14. Press the "Install" option, select the file "SR4-SuperSL1-v2.78-SR4.zip" and slide the blue bar at the bottom.
15. Wait until you finish installing and finally reboot the phone, Done.
Credits for the lenovo-forums.ru forum tutorial
you're awesome, so many thanks!! I can understand the spanish (being my language, after all), but I couldn't find the original tutorial, wich had the password for the files. Thanks!!!!!
dwl99 said:
I found this on Youtube, it looks like it involves flashing a hacked bootloader (although it seems to be for the dual SIM version)
l
Click to expand...
Click to collapse
Reisboy said:
you're awesome, so many thanks!! I can understand the spanish (being my language, after all), but I couldn't find the original tutorial, wich had the password for the files. Thanks!!!!!
Click to expand...
Click to collapse
Can you report back how it goes?
dwl99 said:
Can you report back how it goes?
Click to expand...
Click to collapse
worked like a charm!!
Reisboy said:
worked like a charm!!
Click to expand...
Click to collapse
Thanks - was this on a single or dual-SIM Vibe B? Was it the A2016A40 or A2016B40?
dwl99 said:
Thanks - was this on a single or dual-SIM Vibe B? Was it the A2016A40 or A2016B40?
Click to expand...
Click to collapse
mine's a dual sim, the B version
Full guide posted at https://forum.xda-developers.com/an...oot-lenovo-t3606740/post72294250#post72294250
Thanks for posting the instructions.
I got my a40 (dual-sim) with fw S219, upgraded to S235, then unlocked it.
For whatever reason, I could not "fastboot boot twrp.img", so I had to actually install it (not having a backup of the stock recovery, this made me a bit uneasy). "adb shell 'su -c id'" confirmed that rooting had succeeded.
Thanks to all involved in this success!
I was trying to install LineageOS rom on my Walton Primo GH7.
My Step
1st OEM unlock (successfully)--
Code:
fastboot flashing lock
2nd Flash recovery (successfully)---
Code:
fastboot flash recovery twrp-x.x.x-x-zl1.img
3nd Reboot---
Code:
fastboot reboot
After reboot my phone show a message
Orange State
Your devices has been unlocked and can't be trusted
Your devices will boot in 5 seconds
Click to expand...
Click to collapse
then 25 seconds reboot the phone and show the message again and again.
i believe you have a bootable custom recovery , if yes flash stock or any custom rom available for it via recovery
as i know the command to unlock bootloader is fastboot oem unlock
if recovery isn't booting after booting in to system , try to boot directly in to recovery
shahrior said:
Code:
fastboot flashing lock
Click to expand...
Click to collapse
As far as I know, this is the command used on Nexus devices in order to re-lock the bootloader, whereas the code to unlock it is
Code:
fastboot oem unlock
After this you should reboot your phone (which will be formatted), re-enabling developer options and ADB and then rebooting to fastboot and flash your custom recovery (but first you'd just boot to custom recovery and take a full backup)
After reboot my phone show a message then 25 seconds reboot the phone and show the message again and again.
Click to expand...
Click to collapse
That message is completely normal after unlocking the bootloader, do not try to re-lock it or you could have a red state, and that is bad
But how ? How to boot directly in to recovery ?
Hi All,
I have same problem with my Ulefone Armor 2S. I can't even turn it off... Just rebotting constantly with message:
Orange State
Your devices has been unlocked and can't be trusted
Your devices will boot in 5 seconds
Click to expand...
Click to collapse
when I try to type any fastboot command in cmd then it only shows
<waiting for any device>
Click to expand...
Click to collapse
What can I do??
I've got it
This description come from: https://forum.xda-developers.com/android/development/root-ulefone-armor-2-easy-rooting-t3780055
I changed link to correct ROM
We Need:
SPFlashtool: https://spflashtools.com/windows/sp-flash-tool-v5-1728
Ulefone Armor 2s ROM: https://www.needrom.com/download/ulefone-armor-2s/
The software is quite of auto-explained. Please, Do not use the Ulefone's SPFlashtool, use the one I provided. (I DID NOT CREATE IT)
Shut off your phone
In SPFlashtool set the ''scatter-loading file'' inside the ROM zip, Click ''choose'' and locate it.
Keep it ''Download Only''
Click ''Download'', SPFlashtool will be waiting for your device. (REMEMBER YOU NEED THE DRIVERS I QUOTED ABOVE FOR ALL PROCESSES)
Plug your phone.
Wait until SPFlashtool say it is finished.
After that your phone is brand new.
Bom, estou com o mesmo problema no meu Vernee Apollo, porém a minha situação vai além. Na inicialização ele aparece a mesma mensagem, porém não consigo entrar em modo recovery por que quebrei o botão de volume mais do celular, então tudo que for pra ser feito nele precisa ser feito pelo computador. Fora isso ele reconhece no computador mais não reconhece os drivers então fica com se não estivesse conectado assim não respondendo os comandos do ADB FLASBOOT, alguém por favor consegue me ajudar com o problema.
Well, I have the same problem with my Vernee Apollo, because my situation is going down. At startup it appears the same message, so I can not get into recovery mode because I broke the volume button more than the phone, so everything that is to be done in it needs to be done by computer. Other than that he recognizes on the computer but he does not recognize the drivers so he is not connected so if he does not respond to ADB FLASBOOT commands, somebody can help me with the problem.
me too somebody please help
Please help for orange state
Dear Expert Friends
I was trying to root my Chuwi H9Air Tablet. I did flash with TWRP 3.2.2.0.But TWRP interface do not get any command either touch or buttons
so I can not install Magisk 18.0 to finalize the rooting and device stuck on Orange State not go back or further.
Please Help
Thanks
shahrior said:
I was trying to install LineageOS rom on my Walton Primo GH7.
My Step
1st OEM unlock (successfully)--
Code:
fastboot flashing lock
2nd Flash recovery (successfully)---
Code:
fastboot flash recovery twrp-x.x.x-x-zl1.img
3nd Reboot---
Code:
fastboot reboot
After reboot my phone show a message
after this my phone is not turning on
please help meee
Click to expand...
Click to collapse
adrub said:
I've got it
This description come from: https://forum.xda-developers.com/android/development/root-ulefone-armor-2-easy-rooting-t3780055
I changed link to correct ROM
We Need:
SPFlashtool: https://spflashtools.com/windows/sp-flash-tool-v5-1728
Ulefone Armor 2s ROM: https://www.needrom.com/download/ulefone-armor-2s/
The software is quite of auto-explained. Please, Do not use the Ulefone's SPFlashtool, use the one I provided. (I DID NOT CREATE IT)
Shut off your phone
In SPFlashtool set the ''scatter-loading file'' inside the ROM zip, Click ''choose'' and locate it.
Keep it ''Download Only''
Click ''Download'', SPFlashtool will be waiting for your device. (REMEMBER YOU NEED THE DRIVERS I QUOTED ABOVE FOR ALL PROCESSES)
Plug your phone.
Wait until SPFlashtool say it is finished.
After that your phone is brand new.
Click to expand...
Click to collapse
Yea I tried that but my problem is that the boot screen shows up and when it starts the process everything is fine but my phone won't stay in the boot screen and will reboot after 10 to 15 seconds only to show me the same boot screen with the same result after that.
So to put it simple: I can't do the method because the phone reboots to fast and so the Flash Tool can't make it's job. I would need something that would freeze the screen for example.
Can you Help in any way?
i have same problem
i installed twrp in my micromax q4310
everything goes fine
but when i rebooted my device
it shows a message saying " orange state
your device has been unlocked and can't be trusted
your device will boot in 5 seconds "
and after 5 seconds it reboot again with same message then again and again until my device discharged completely i am not able to go in recovery mode also the fastboot commands not recognising my device
please help
arpitmishraethicalhacker said:
i installed twrp in my micromax q4310
everything goes fine
but when i rebooted my device
it shows a message saying " orange state
your device has been unlocked and can't be trusted
your device will boot in 5 seconds "
and after 5 seconds it reboot again with same message then again and again until my device discharged completely i am not able to go in recovery mode also the fastboot commands not recognising my device
please help
Click to expand...
Click to collapse
I have the same problem. Nobody knows the solution?
O_state not entering recovery
arpitmishraethicalhacker said:
i installed twrp in my micromax q4310
everything goes fine
but when i rebooted my device
it shows a message saying " orange state
your device has been unlocked and can't be trusted
your device will boot in 5 seconds "
and after 5 seconds it reboot again with same message then again and again until my device discharged completely i am not able to go in recovery mode also the fastboot commands not recognising my device
please help
Click to expand...
Click to collapse
I have the same mobile, I used magisk and patched my boot image then used adb to flash it {without any custom recovery)}
Also I unlocked my bootloader then when reboot my phone, orange state error comes but my phone reboots normal and works fine.
I have then wanted to install twrp but my mobile does not let me, every time I go to recovery, it either boots my phone back or if I use adb it does not show my mobile in it.
I will be grateful if any expert can help me install twrp, cwm any custom recovery through which I can install xposed.
Also one thing is that when I use normal bootloader commands, it doesn't work.
But I use....
Fastboot -i 0x2a96 flash ...
Anything
It works , please guide me to fix the orange state or help me install custom recovery.
Also, I tried flashing, it showed success but didn't reboot to recovery, it again rebooted into normal
Waiting for expert advice......
????
My phone:
Micromax Canvas 2 2017 Q4310.
I was a big fan of Android 1 of canvas and I did most of experiments on it so I decided to get it's upgrade.
Anyone please help , also spflash tool doesn't detect my phone and I have latest drivers installed.
I have "Orange state" on a Blackview BV9000Pro-f device.
After unlock bootloader and flash TWRP impossibile the restart in recovery mode.
Can give me somebody, any idea???
Orange State is just a info message for bootloader is unlocked. however, you can remove this message (just cosmetical, this does not fix any problems)
- new: 'Orange State' disabler
if you wanna get rid of the waiting time flash the 'Orange State disabler'
WARNING: experts only! do not try this if you don't know how to unbrick your device
- make a backup of lk.bin (bootloader)
- install orange_state_disabler_v0.3.zip from TWRP
- flash lk.bin from SP Flash Tool (in case you bricked your device)
--- 'Orange State' disabler v0.3 ---
##### Created by XopmoH97 : ) #####
source: orange_state_disabler_v0.3.zip
i have same problem for my unit INFINIX HOT 9 PLAY X680B
Orange State
Your devices has been unlocked and can't be trusted
Your devices will boot in 5 seconds
to clarify: Orange State has nothing to do with. boot-loop must have other causes. most likely dm-verity prevents boot because of flashing modified partition (like TWRP)
in order to disable dm-verity one must generate avb-disabled vbmeta.img from python avbtools
if device doesn't have vbmeta partition one must patch boot.img with Magisk Manager
aIecxs said:
to clarify: Orange State has nothing to do with. boot-loop must have other causes. most likely dm-verity prevents boot because of flashing modified partition (like TWRP)
in order to disable dm-verity one must generate avb-disabled vbmeta.img from python avbtools
if device doesn't have vbmeta partition one must patch boot.img with Magisk Manager
Click to expand...
Click to collapse
Does we really need to generate avb-disabled vbmeta.img from python avbtools?
Flashing stock vbmeta like fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img does not work?
haven't tested but from my understanding the above fastboot flags are for flashing purposes only, in order to allow flashing vbmeta_disabled.img, and not for disabling AVB itself. please correct me if i am wrong
I'm starting this thread in the hopes that devs will start mods for the Doogee V20. **Crosses fingers**
EldiggEmrys said:
I'm starting this thread in the hopes that devs will start mods for the Doogee V20. **Crosses fingers**
Click to expand...
Click to collapse
@EldiggEmrys
Welcome to XDA. I hope you'll always get the support you require.
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
I've moved the thread to Android Q&A.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Thank you. I'm new here, so this was a huge help.
Hello! I have the same question... I would like to root it. I have only unlocked the bootloader.. Thanks!
Like to start with simple but Clear Flash instructions, the ppt mixed Chinese/English pictorial doesn't instill confidence swapping to a NOEEA rom from EEA
To start, there's no Rom file on the web... The only file available is corrupt from Microsoft onedrive link.. I've downloaded that file over 10 times just so i can fix a bricked doogee v20, the file is broken
also there is no V3.03 Rom in web.
I finally Got working File from older Rom update, I can't flash the device for some reason using SPtool
StackhouseXDA said:
To start, there's no Rom file on the web... The only file available is corrupt from Microsoft onedrive link.. I've downloaded that file over 10 times just so i can fix a bricked doogee v20, the file is broken
Click to expand...
Click to collapse
Hi! Correct ROM files here (cloud store) : https://disk.yandex.com/d/2xfi4M9TA3CIIQ
Instructions for rooting device:
There are similar instructions in English for getting root on V10 - www.hovatek.com/forum/thread-40209.html
Attention - your data will disappear after manipulation, you will have to configure the phone again. Firmware updates by air (OTA) will not arrive.
0. You can use the FlashTool utility to make a backup of your phone's firmware.
1. First of all, you need to patch the bootloader. Just copy the boot.img from the firmware to the phone's memory and patch by Magisk installed on the phone (I like version 23.0)
2. Copy the patched boot to the computer or you can use already patched boot: https://forum.xda-developers.com/attachments/5658385/
3. Connect the phone to the computer with a USB cable and through the phone settings we become a developer and in the developer menu you can tap the OEM unlock and USB debugging.
4. Download the attached file on the computer with a set of ADB utilities https://forum.xda-developers.com/attachments/5658389
5. Download and install USB drivers on the computer https://forum.xda-developers.com/attachments/5658387/
6. Reboot phone into fastboot mode (hold the Volume + button when restarting)
7. Through ADB, unlock the bootloader by entering fastboot flashing unlock
8. Using ADB to flashing modified vbmeta file (boot integrity checks removed)- fastboot flash vbmeta vbmeta.img https://forum.xda-developers.com/attachments/5658391/
9. Reboot into fasboot again (just enter - fastboot reboot fastboot)
10. Flash a patched boot - fastboot flash boot boot_magisk.img https://forum.xda-developers.com/attachments/5658385/
11. Clearing data using fastboot -w
12. Perform fastboot reboot
13. After restarting the phone and initial setup, click on the Magisk apk icon and after launching, click "Install".
Root have been obtained!
ths
laseg said:
Hi! Correct ROM files here (cloud store) : https://disk.yandex.com/d/2xfi4M9TA3CIIQ
Instructions for rooting device:
There are similar instructions in English for getting root on V10 - www.hovatek.com/forum/thread-40209.html
Attention - your data will disappear after manipulation, you will have to configure the phone again. Firmware updates by air (OTA) will not arrive.
0. You can use the FlashTool utility to make a backup of your phone's firmware.
1. First of all, you need to patch the bootloader. Just copy the boot.img from the firmware to the phone's memory and patch by Magisk installed on the phone (I like version 23.0)
2. Copy the patched boot to the computer or you can use already patched boot: https://forum.xda-developers.com/attachments/5658385/
3. Connect the phone to the computer with a USB cable and through the phone settings we become a developer and in the developer menu you can tap the OEM unlock and USB debugging.
4. Download the attached file on the computer with a set of ADB utilities https://forum.xda-developers.com/attachments/5658389
5. Download and install USB drivers on the computer https://forum.xda-developers.com/attachments/5658387/
6. Reboot phone into fastboot mode (hold the Volume + button when restarting)
7. Through ADB, unlock the bootloader by entering fastboot flashing unlock
8. Using ADB to flashing modified vbmeta file (boot integrity checks removed)- fastboot flash vbmeta vbmeta.img https://forum.xda-developers.com/attachments/5658391/
9. Reboot into fasboot again (just enter - fastboot reboot fastboot)
10. Flash a patched boot - fastboot flash boot boot_magisk.img https://forum.xda-developers.com/attachments/5658385/
11. Clearing data using fastboot -w
12. Perform fastboot reboot
13. After restarting the phone and initial setup, click on the Magisk apk icon and after launching, click "Install".
Root have
Click to expand...
Click to collapse
many thanks mate for the update, but my issue is a little bit complex, i actually bought the Doogee v20 from an Asian market, it came in bricked, and doesn't boot past the doogee logo, I tried flashing with SP tool several times to no success, I encountered all kinds of errors. in between this is supposedly factory build device from the official store.
Hi! I was able to root my V20 too:
Instead of flashing the modified vbmeta.img I followed the instruction from magisk and flashed the original vbmeta after flashing the patched boot.img. Using this command, without a need to reboot into fasboot:
fastboot flash vbmeta --disable-verity --disable-verification vbmeta.img
Now I am looking how to sideload zip files. I'd like to install f-droid privileged extensions. The original recovery does not allow to flash unsigned zips. How can I remove the check?
Next question: Does anybody knows how to get a twrp recovery?
laseg said:
Hi! Correct ROM files here (cloud store) : https://disk.yandex.com/d/2xfi4M9TA3CIIQ
Instructions for rooting device:
There are similar instructions in English for getting root on V10 - www.hovatek.com/forum/thread-40209.html
Attention - your data will disappear after manipulation, you will have to configure the phone again. Firmware updates by air (OTA) will not arrive.
0. You can use the FlashTool utility to make a backup of your phone's firmware.
1. First of all, you need to patch the bootloader. Just copy the boot.img from the firmware to the phone's memory and patch by Magisk installed on the phone (I like version 23.0)
2. Copy the patched boot to the computer or you can use already patched boot: https://forum.xda-developers.com/attachments/5658385/
3. Connect the phone to the computer with a USB cable and through the phone settings we become a developer and in the developer menu you can tap the OEM unlock and USB debugging.
4. Download the attached file on the computer with a set of ADB utilities https://forum.xda-developers.com/attachments/5658389
5. Download and install USB drivers on the computer https://forum.xda-developers.com/attachments/5658387/
6. Reboot phone into fastboot mode (hold the Volume + button when restarting)
7. Through ADB, unlock the bootloader by entering fastboot flashing unlock
8. Using ADB to flashing modified vbmeta file (boot integrity checks removed)- fastboot flash vbmeta vbmeta.img https://forum.xda-developers.com/attachments/5658391/
9. Reboot into fasboot again (just enter - fastboot reboot fastboot)
10. Flash a patched boot - fastboot flash boot boot_magisk.img https://forum.xda-developers.com/attachments/5658385/
11. Clearing data using fastboot -w
12. Perform fastboot reboot
13. After restarting the phone and initial setup, click on the Magisk apk icon and after launching, click "Install".
Root have been obtained!
Click to expand...
Click to collapse
Hi, I followed your info, thanks for sharing... but I somehow bricked my V20... I luckily made a backup and I now have all the 52 ROM_XX files but I don't know how to restore... I can go in fastboot mode.
You might have a look at:
Download Doogee V20 Stock Rom Firmware Flash File ~ Techswizz
This post contains the Doogee V20 Stock Rom firmware Flash File that will allow you to restore your Doogee V20 Smartphone to its original state. You will
www.techswizz.com
or
Doogee V20 Firmware Flash File (Stock ROM)
Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your
www.getdroidtips.com
I can't tell if it will work as I never did it myself. You need the zip file, see link above or get it from doogee. Wish you good luck!
kakadu3 said:
You might have a look at:
Download Doogee V20 Stock Rom Firmware Flash File ~ Techswizz
This post contains the Doogee V20 Stock Rom firmware Flash File that will allow you to restore your Doogee V20 Smartphone to its original state. You will
www.techswizz.com
or
Doogee V20 Firmware Flash File (Stock ROM)
Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your
www.getdroidtips.com
I can't tell if it will work as I never did it myself. You need the zip file, see link above or get it from doogee. Wish you good luck!
Click to expand...
Click to collapse
Thanks! I managed to restore it with Stock and then followed again the guide. This time everything fine.
Hi All,
Has anyone here been successful in finding an TWRP recovery that works with the Doogee V20? So far I have not had any luck in locating one for that phone yet. I even tried looking for the V10 version which is the previous model with no luck. Trying to repair my V20 and definitely need the TWRP in order to do so.
Thanks in advance!
-G
Hi,
If anyone is interested in stock firmware for Doogee V20, here's the link to the official Doogee website where you can find and download from their repositories including the one with ROMs for V20. Hope it can be useful for someone here. Thank you!
Firmware,Service
Firmware,Service
www.doogee.cc
StackhouseXDA said:
many thanks mate for the update, but my issue is a little bit complex, i actually bought the Doogee v20 from an Asian market, it came in bricked, and doesn't boot past the doogee logo, I tried flashing with SP tool several times to no success, I encountered all kinds of errors. in between this is supposedly factory build device from the official store.
Click to expand...
Click to collapse
Amigo, seu problema é fácil de resolver,
faça o download da ROM oficial direto do fabricante,
https://onedrive.live.com/?authkey=!AHwWCrOETirL9c8&cid=7525A55C0028FDF5&id=7525A55C0028FDF5!3103&parId=7525A55C0028FDF5!3099&o=OneUp.
abra o spflashtool em modo administrador.
Selecione o arquivo scatter.
Logo a baixo tem um botão escrito (download only), clique na seta e altere para ( download e format ),
está e a correção do seu problema.
Após isso clique no botão download,
Para iniciar o processo de atualização da ROM de estoque em seu Doogee V20, você precisa desligar o dispositivo e manter pressionada a tecla Diminuir volume e conectar seu telefone ao PC/laptop usando um cabo USB (Mantenha o botão precisando volume baixo até que seu computador detecte o telefone.)
Quando o telefone se conectar, seu dispositivo será atualizado para atualizar o firmware.
e voala, seu doogee v20 vivo novamente.
Boa sorte.
Caso sua ROM perca os números do IMEI não adianta reinstalar a ROM novamente, basta instalar o programa vbmeta em seu PC/LapTop e colocar o número do IMEI novamente. ( Tem vídeo tutorial no YouTube), obs: use o número do IMEI do seu aparelho que está na caixa.
Mod translation:
Friend, your problem is easy to solve,
download the official ROM directly from the manufacturer,
OneDrive
onedrive.live.com
open spflashtool in administrator mode.
Select the scatter file.
Just below there is a button written (download only), click on the arrow and change it to ( download and format ),
is and the fix for your problem.
After that click the download button,
To start the process of flashing the Stock ROM on your Doogee V20, you need to turn off the device and hold down the Volume Down key and connect your phone to the PC/laptop using a USB cable (Hold the button needing volume down until your computer detect the phone.)
When the phone connects, your device will flash to update the firmware.
and voala, your doogee v20 alive again.
Good luck.
If your ROM loses the IMEI numbers, it's no use to reinstall the ROM again, just install the vbmeta program on your PC/LapTop and put the IMEI number again. (There is a video tutorial on YouTube), note: use the IMEI number of your device that is on the box.
davi148 said:
Hi, I followed your info, thanks for sharing... but I somehow bricked my V20... I luckily made a backup and I now have all the 52 ROM_XX files but I don't know how to restore... I can go in fastboot mode.
Click to expand...
Click to collapse
faça todo o processo de instalação da ROM oficial pelo spflashtool, porém antes de conectar o telefone ao PC selecione todos os arquivos e na opção ( somente download ) altere para ( baixe e formate) e inicie a instalação,
pronto seu v20 vai viver novamente.
Mod translation:
do the entire installation process of the official ROM by spflashtool, but before connecting the phone to the PC select all the files and in the option (download only) change to (download and format) and start the installation,
ready your v20 will live again.
jefersonfc said:
Mod translation:
do the entire installation process of the official ROM by spflashtool, but before connecting the phone to the PC select all the files and in the option (download only) change to (download and format) and start the installation,
ready your v20 will live again.
Click to expand...
Click to collapse
Greetings, and welcome to XDA. As a friendly remider, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and enjoy your stay on XDA.
-Regards: Badger50
Hi,
Please I need help. I rooted my doogee V20 correctly but after some days, when trying to do a small change to the /system/etc/init/hw/init.rc with root explorer, accidentally cleared the contents of the init.rc
Now I have an empty init.rc and dont know how to recover it.
The phone is still connected and charged, but I think I need to recover the init.rc even to be able to reflash it right?
From what I understood, if I reboot the V20 without init.rc it will bricked right?
The ADB depends on the init.rc I think...
If any of you could share your working /system/etc/init/hw/init.rc I would be really grateful
Or if you know another way to recover it please let me know!!!!
Thank you for your help