Hello,, Please Anyone Help Me . My Xperia Sk17i Can Not Boot into System.. I have Re-Flashed it into .42 . Before it, I use Firmware .335 .
When I push the Power Button, The Screen just blinked sometimes, the color of screen that blinked is brown..
Is my LCD that crashed ? Or aything else ? Please Help Me..
abisyarif said:
Hello,, Please Anyone Help Me . My Xperia Sk17i Can Not Boot into System.. I have Re-Flashed it into .42 . Before it, I use Firmware .335 .
When I push the Power Button, The Screen just blinked sometimes, the color of screen that blinked is brown..
Is my LCD that crashed ? Or aything else ? Please Help Me..
Click to expand...
Click to collapse
unusual behaviour!!
hw problem perhaps!
recommended to contact sony if under warentty.
abisyarif said:
Hello,, Please Anyone Help Me . My Xperia Sk17i Can Not Boot into System.. I have Re-Flashed it into .42 . Before it, I use Firmware .335 .
When I push the Power Button, The Screen just blinked sometimes, the color of screen that blinked is brown..
Is my LCD that crashed ? Or aything else ? Please Help Me..
Click to expand...
Click to collapse
i advice zu to update reinstall stock rom using seus (sony updater or suite from pc) there are several threads explaining how to revert to stock rom. in sony pc updater/suite CHOOSE REPAIR-MODE and follow descriptions. it should fix all problems in software,and u can chosse between GB or ICS...should fix all, if ur device ISNT hardbricked or have hardware damage like said above
peace, bejunk
Related
Sorry f or my english... i'm french !
My Xperia X10 wont start up.
When i switch on by the power button the mobile phone buzz but the screen stay dark.
I have use FlashTool to install X10_1.0_SE_StockRom_MultiTouch
i have use Update Serve from SE and install the soft again, but same problem.
The phone dont want to switch on !
If some one can help me, i will be gratefull
CyrilKa
cyrilka said:
Sorry f or my english... i'm french !
My Xperia X10 wont start up.
When i switch on by the power button the mobile phone buzz but the screen stay dark.
I have use FlashTool to install X10_1.0_SE_StockRom_MultiTouch
i have use Update Serve from SE and install the soft again, but same problem.
The phone dont want to switch on !
If some one can help me, i will be gratefull
CyrilKa
Click to expand...
Click to collapse
Did you allready try takin the battery out for a minute?
yes i do but sill black screen
the phone stay like shut down
just the screen some times "bling"
hmm i got the same, it only says Sony Ericsson, you cant get in safe mode either?
turn device on and press <- button?
for me, the phone don't say anything
Sony Ericsson is not on the screen...
same as before
Yes, ive got the same.
Hey I have just excelently bricked my Device,I was installing some MiUi over TripnMiUi and the system won't boot up ,it just stays at the Sony Ericsson screen and it won't go after that screen. When I tried SEUS Repair it said there isn't any firmware for my device,if I try to flash with FlashTool it is at the screen anyway. I Don't know what to do ,please help.
tesak555 said:
Hey I have just excelently bricked my Device,I was installing some MiUi over TripnMiUi and the system won't boot up ,it just stays at the Sony Ericsson screen and it won't go after that screen. When I tried SEUS Repair it said there isn't any firmware for my device,if I try to flash with FlashTool it is at the screen anyway. I Don't know what to do ,please help.
Click to expand...
Click to collapse
Your kind of post exist every 2-5days once. At most you never did do a search,
You panicked, you came here, you sign up, you post, after your device is fixed you leave without even replying to someone who at least trying to help you. Maybe it may not be you.
You can find your answers below
HERE
HERE
Hi friends,
I have Xperia U, i installed CWM it, i opened it for 1st time, after that:
While i want to go to CWM, it don't go and locks on SONY logo . I waited also 30min for it but, it didn't work and i have to remove battery.
After that, when i turn my device normally on, the phone starts, the screen resolution is very low( as like as my Galaxy Ace resolution) and an red border blink on the screen and after that, i get An error in notification bar:
"M6-6 error". & i think it have "fatal error" plus that.
What's this error?
Sorry for my bad EN.
if u have a nandroid backup... restore it...
if not
i suggest u to flash the official ftf via flashtool
RE:
drsanket_xperia_u said:
if u have a nandroid backup... restore it...
if not
i suggest u to flash the official ftf via flashtool
Click to expand...
Click to collapse
I want to know that is it an Haedware problem or not?
*#*#7378423#*#*
type this on stock rom
go to tests
and check ur hardware
Help,why my neo L suddenly no display..after lockscreen turn off display,then display won't turn on again..i try reboot,same..no display..got vibrate,but nothing display..also no sony logo when reboot..WTH is going on with my neo..someone help me:crying:
bellasarra22 said:
Help,why my neo L suddenly no display..after lockscreen turn off display,then display won't turn on again..i try reboot,same..no display..got vibrate,but nothing display..also no sony logo when reboot..WTH is going on with my neo..someone help me:crying:
Click to expand...
Click to collapse
Try flash stock ftf ? Or else go to Service center if you failed flash stock ftf ! Hardware conflict maybe
bellasarra22 said:
Help,why my neo L suddenly no display..after lockscreen turn off display,then display won't turn on again..i try reboot,same..no display..got vibrate,but nothing display..also no sony logo when reboot..WTH is going on with my neo..someone help me:crying:
Click to expand...
Click to collapse
Charge it completely! N try
Might have caused excessive drains
Or else,try to flash stock Rom again through flashtool
If that too doesn't help,consult with service center guys!
Sent from my MT11i using xda premium
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.
I can't post the pictures because I'm new here. The phone keeps rebooting and only displays the Sony logo, after that the screen turns blue and the phone turns off.
You can try this guide - http://forum.xda-developers.com/m4-aqua/general/unbrick-sony-xperia-m4-aqua-t3196289 to unbrick your device mate.
@japiepapie my phone just started doing that as well, i flashed stock with flashtool but still have that blue screen once in a while, this might be hardware issue...
Same problem here. I installed stock rom with Xperia Companion and Flashboot, but the blue screen keeps appearing.
I'll try a custom rom, as my warranty is over....
CarDGee said:
@japiepapie my phone just started doing that as well, i flashed stock with flashtool but still have that blue screen once in a while, this might be hardware issue...
Click to expand...
Click to collapse
After upgrading non-rooted nor flashed E2303 to Marşmelov via Xperia Companion, I get blue screen every time Xperia is attempting to boot.
It goes blue screen before asking for Android PIN/Password.
I used Xperia Companion to "repair software" and my blue screen problem is gone.
same happens here, xperia m4 aqua on any rom i have tried(official rom lollipop and marshmallow) it gives blue screen randomly and when i get it started it goes very slow, activating stamina still does the same....it all started after upgrading to marshmallow as i remember.
i have solved this issue today by reballing its emmc ic ......
preeta said:
i have solved this issue today by reballing its emmc ic ......
Click to expand...
Click to collapse
Hy
Please can´t you give more details how repair emmc
Thanks
zipikiki said:
Hy
Please can´t you give more details how repair emmc
Thanks
Click to expand...
Click to collapse
It's basically soldering.