My GT-I9300 international galaxy S3 decided yesterday to brick itself, all of a sudden its stuck at the boot screen (white samsung ... text).
Tried to reboot into recovery but no go, when i hold the buttons it just continues to reboot and reboot, only showing the white text.
Tried to reboot into download and that worked, i though fhew, i got a berak and not all is lost.
In download mode it says current binary Samsung official even though i rooted and changed rom...
Product name is blank, Custom bin download is no, status is custom.
Tried to recover with kies but it complains that it cannot install new firmware (after it downloads the firmware, extracts, and all instruction followed).
Tried with odin (several original roms with my region and the one from kies) but with no luck, odin complains "There is no PIT partition.".
Tried to repartition with GT-I9300_mx_20120329.pit but then it does SET pit and hangs on "Get PIT for Mapping".
Is there any chance to save my phone ? I'm getting really desperate here.
Product name blank = sds. Only samsung service Centre can repair
Sent from my GT-I9300 using Tapatalk 4 Beta
try this
phenixdoc said:
My GT-I9300 international galaxy S3 decided yesterday to brick itself, all of a sudden its stuck at the boot screen (white samsung ... text).
Tried to reboot into recovery but no go, when i hold the buttons it just continues to reboot and reboot, only showing the white text.
Tried to reboot into download and that worked, i though fhew, i got a berak and not all is lost.
In download mode it says current binary Samsung official even though i rooted and changed rom...
Product name is blank, Custom bin download is no, status is custom.
Tried to recover with kies but it complains that it cannot install new firmware (after it downloads the firmware, extracts, and all instruction followed).
Tried with odin (several original roms with my region and the one from kies) but with no luck, odin complains "There is no PIT partition.".
Tried to repartition with GT-I9300_mx_20120329.pit but then it does SET pit and hangs on "Get PIT for Mapping".
Is there any chance to save my phone ? I'm getting really desperate here.
Click to expand...
Click to collapse
Hm, it worked for me once , try connecting it to odin in downlode mode and try installing cmd form there, it should work and help you get your phone back. Since original rom is not working. If that wont work then i am not sure. i need to get a better understand of what you did to it,for the phone to go into brick mode.
a_akash said:
Hm, it worked for me once , try connecting it to odin in downlode mode and try installing cmd form there, it should work and help you get your phone back. Since original rom is not working. If that wont work then i am not sure. i need to get a better understand of what you did to it,for the phone to go into brick mode.
Click to expand...
Click to collapse
No offence, but it's pointless. He has no product name. He needs a replacement Motherboard. It's nothing to do with anything he did.
rootSU said:
Product name blank = sds. Only samsung service Centre can repair
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks, gave it away to a shop, they're gonna try to hardware flash it (JIT/JIP ? i wasn't really listening).
Related
i tried to flash LP7 kernel on ICS firmware XXLPS on my Galaxy SII and it was successful but after the reboot phone got stuck at the yellow triangle screen.
Now i tried to flash a new firmware XXLPQ (older than XXLPS) but it failed and i get message on the phone that firmware upgrade encountered an error, connect to kies.
have i bricked my phone or is there a way out here?
Please help.
Khalid.
kmugal said:
i tried to flash LP7 kernel on ICS firmware XXLPS on my Galaxy SII and it was successful but after the reboot phone got stuck at the yellow triangle screen.
Now i tried to flash a new firmware XXLPQ (older than XXLPS) but it failed and i get message on the phone that firmware upgrade encountered an error, connect to kies.
have i bricked my phone or is there a way out here?
Please help.
Khalid.
Click to expand...
Click to collapse
What is the status of your phone now (after flashing XXLPQ)? Can you enter download mode?
fxrb said:
What is the status of your phone now (after flashing XXLPQ)? Can you enter download mode?
Click to expand...
Click to collapse
flashing XXLPQ fails.
when i switch on the phone i get a message "Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again".
Yes i can enter download mode.
kmugal said:
flashing XXLPQ fails.
when i switch on the phone i get a message "Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again".
Yes i can enter download mode.
Click to expand...
Click to collapse
I assume you were flashing with ODIN and therefore that you are familiar with it. If not just don't go ahead; do some reading instead .
Put your phone into download mode and make absolutely sure Kies is not running. Start ODIN, then connect the phone by USB. Does ODIN detect the phone?
fxrb said:
I assume you were flashing with ODIN and therefore that you are familiar with it. If not just don't go ahead; do some reading instead .
Put your phone into download mode and make absolutely sure Kies is not running. Start ODIN, then connect the phone by USB. Does ODIN detect the phone?
Click to expand...
Click to collapse
I made sure Kies is not running, checked all the process under task manager.
Yes i am using ODIN1.85, it detects my phone but flashing fails, i think because i had XXLPS already and now i am trying to flash XXLPQ.
I actually wanted to flash CM9, and the procedure i found online said i must have XXLPQ, and for that i must have LP7 and clockwork recovery.
Try to go into recovery and wipe data + cache and format /system. Finally flash a rom in odin
If it fails, try odin and reparation with pit.
If no go, it is a physical damage in partition. RMA
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Try to go into recovery and wipe data + cache and format /system. Finally flash a rom in odin
If it fails, try odin and reparation with pit.
If no go, it is a physical damage in partition. RMA
i dont have recovery on my phone.
so only option is repartition with pit file.
now can you please help me where to find correct pit file and firmware for my phone.
How do i find which variant is my phone (I9100 or I9100G etc)
Click to expand...
Click to collapse
kmugal said:
i dont have recovery on my phone.
so only option is repartition with pit file.
now can you please help me where to find correct pit file and firmware for my phone.
How do i find which variant is my phone (I9100 or I9100G etc)
Click to expand...
Click to collapse
Every phone has recovery. Power off, hold down the volume up, home, and power buttons. When your see the screen come on, let go of power, but keep holding home and volume up.
To find out your exact model number, look on the label under the battery.
ctomgee said:
Every phone has recovery. Power off, hold down the volume up, home, and power buttons. When your see the screen come on, let go of power, but keep holding home and volume up.
To find out your exact model number, look on the label under the battery.
Click to expand...
Click to collapse
Thanks, My phone does not enter recovery mode.
Can you please guide me where i can download pit and ICS firmware for I9100.
kmugal said:
Thanks, My phone does not enter recovery mode.
Can you please guide me where i can download pit and ICS firmware for I9100.
Click to expand...
Click to collapse
does it matter if i have SD card in phone or not.
i currently have not SD card inserted in my phone.
kmugal said:
Thanks, My phone does not enter recovery mode.
Can you please guide me where i can download pit and ICS firmware for I9100.
Click to expand...
Click to collapse
You sure you have an i9100 now? You're currently active in another thread that is specific for i9100G.
In any case, if you keep going down the road of using a .pit file, make sure you use one for your specific model.
Look in the stickies in Q&A, there is a guide for fixing unflashable GSII by phistashio, I think his name is. There are .pit files there, I believe.
Thanks for all your support guys.
I managed to recover my Galaxy SII I9100 using phistasio's guide.
I do have a similar problem
Hello.
Sorry for taking your time. And for my bad english.
I'm from Lisbon, Portugal and bought a I9100 in May 2011, in a big store that imports cells from Germany.
Trought kies, i've been able to upgrade my I9100 firmware.
Last month i installed an anti-virus (kaspersky). A week later, I was able to uninstall it with Uninstaller App. It was not a good idea - each time i opened the display, I needed to put my password. I was told about this site, where I saw the brand new I9300XXBLG8_I9300OXABLG8_I9300XXLG8, and decided to make an upgrade. Used Odin, and... all right. But, each time I enter kies to see if there was an upgrade, a window apears saying it was not possible to make an upgrade trought kies. To be able to do future upgrades, I tried to change my csc (DBT) to btu, or xeu, but, with samsung galaxy 2/s2 csc, the only csc it showed was dbt (the german csc). So, I tried to put another firmware - this one, from Germany. I found it in this site - I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3.
I put my device in Recovery MODE (Home + Volume up + Power) -> Wipe Data/Factory reset. WHEN THE PHONE WAS OPENING, I took out the battery & put it back in -> put my device into Download MODE (Home + Volume Down + Power) -> put my device into Download MODE (Home + Volume Down + Power) -> clicked PDA and selected *.tar.md5 and clicked START.
After some moments, I got a message of FAIL.
Now, if I try to enter Recovery Mode, I receive a message saying - "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". And, to be able to put this message off, must take the battery out.What did I do wrong? What shall I do?
I know your time is precious to be wasted with this problem. But, please, will you help me?
I thank you very much.
Pedro Branco
pbroncas said:
Hello.
Sorry for taking your time. And for my bad english.
I'm from Lisbon, Portugal and bought a I9100 in May 2011, in a big store that imports cells from Germany.
Trought kies, i've been able to upgrade my I9100 firware.
Last month i installed an anti-virus (kaspersky). A week later, I was able to uninstall it with Uninstaller App. It was not a good idea - each time i opened the display, I needed to put my password. I was told about this site, where I saw the brand new I9300XXBLG8_I9300OXABLG8_I9300XXLG8, and decided to make an upgrade. Used Odin, and... all right. But, each time I enter kies to see if there was an upgrade, a window apears saying it was not possible to make an upgrade trought kies. To be able to do future upgrades, I tried to change my csc (DBT) to btu, or xeu, but, with samsung galaxy 2/s2 csc, the only csc it showed was dbt (the german csc). So, I tried to put another firmware - this one, from Germany. I found it in this site - I9100GXXLPY_I9100GXXLPV_I9100GDBTLP3.
I put my device in Recovery MODE (Home + Volume up + Power) -> Wipe Data/Factory reset. WHEN THE PHONE WAS OPENING, I took out the battery & put it back in -> put my device into Download MODE (Home + Volume Down + Power) -> put my device into Download MODE (Home + Volume Down + Power) -> clicked PDA and selected *.tar.md5 and clicked START.
After some moments, I got a message of FAIL.
Now, if I try to enter Recovery Mode, I receive a message saying - "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". And, to be able to put this message off, must take the battery out.What did I do wrong? What shall I do?
I know your time is precious to be wasted with this problem. But, please, will you help me?
I thank you very much.
Pedro Branco
Click to expand...
Click to collapse
You flashed an i9100G firmware to an i9100. Firmwares are not compatible between these variants.
You also were basing your desire to upgrade on the existence of a firmware for the i9300, which is the galaxy s3.
Thanks, ctomgee
ctomgee said:
You flashed an i9100G firmware to an i9100. Firmwares are not compatible between these variants.
You also were basing your desire to upgrade on the existence of a firmware for the i9300, which is the galaxy s3.
Click to expand...
Click to collapse
I thank you for your great help.
I saw my mistakes: the new brand firmware I installed was, not I9300XXBLG8_I9300OXABLG8_I9300XXLG8; but I9100XWLPT_I9100XXLQ6_I9100XEULPA. So, I reinstalled this last one, and the cell is fine
Thank you.
But I'd like to make a very last question - as I said, the cell is fine, but... I'm not able to upgrade it's firmware using Kies. I think it's because the store where I bought my I9100 imported it from Germany - so, its csc is DBT. The csc from the firmware I installed is XEU - don't understand why, but, when I open Kies, in the csc place, it says DBT. I tried to use the CSC Select app, to choose BUT or XEU. but I have no choice - the only csc there is DBT,
As you know all about Android world, could you tell me what shall I do to be able to get upgrades from Kies?
Once again, sorry for my bad english and thank you very much for your help.
Pedro Branco
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
bigallo said:
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
Click to expand...
Click to collapse
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
xSpeced said:
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
Click to expand...
Click to collapse
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
bigallo said:
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
Click to expand...
Click to collapse
What happens when you try to boot into CWM?
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Mika83AC said:
What happens when you try to boot into CWM?
Click to expand...
Click to collapse
Notthing, if i hold VolumeUp+Home+Power the phone doesn't turn on, neither on logo screen
holdz said:
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Click to expand...
Click to collapse
I can't use Odin cause when i plugin the phone (in download mode) Odin and the whole PC can't see it. I have win8, i don't know if that's a problem for Odin or something.
Is there a way to check if i have driver/odin/any working without using the phone?
Is there a way to check if i have driver/odin/any working without using the phone?
By plugging another SGS3 in is all .
jje
Today Evening i went out with my friends, and we took few photos on my mobile.. After that my friend gave my mobile by stating it got stucked. I looked into it, yes it got stucked.. Then i forced it to restart.. it could not start, stucked on bootscreen. so i simply removed the battery and put the mobile into my pocket. once after i reached my home, i started the mobile.. again it got stucked in bootscreen. Then i gone into recovery mode and flashed the same rom (neatrom v4.7) on it from my sd card. Then it got booted, after sometime again it restarted automatcally and stucked on bootscreen. This time i could not even get into recovery mode.. so i downloaded the official stock firmware to install via download mode. Then i tried to flash through odin. it did not got flashed or anything happened for nearly half an hour. so i removed the usb cable from the laptop, immediately phone screen got off.. when i tried to switch on or get into download mode.. my phone does not responds, it is dead. i tried many ways like removing battery and inserting charger while pressing on power button then inserting the battery at the same time. what did i wrong? help me plzzz friends.. what should i do now to get back my mobile?
You plugged out your phone from PC while downloading from Odin?!?!?You completely bricked your device now.Maybe it couldn't flash the kernel or the firmware...Now phone is of course dead.You need to buy a new motherboard.BTW,what firmware did you flash?Do you have I9100 or other variant?
When you flashed a stock ROM, did you flash a pit file as well?
If no, get a jig so you can get to Download mode.
Sent from the little guy
GamingDj said:
You plugged out your phone from PC while downloading from Odin?!?!?You completely bricked your device now.Maybe it couldn't flash the kernel or the firmware...Now phone is of course dead.You need to buy a new motherboard.BTW,what firmware did you flash?Do you have I9100 or other variant?
Click to expand...
Click to collapse
I tried to flash this firmware "Base Firmware: I9100XWLSS (4.1.2)" from http://forum.xda-developers.com/showthread.php?t=1544487
i have I9100
gastonw said:
When you flashed a stock ROM, did you flash a pit file as well?
If no, get a jig so you can get to Download mode.
Sent from the little guy
Click to expand...
Click to collapse
no bro i did not flash a pit file.. i just flashed the md5 file from the firmware zip on pda. the flashing did not occur, it was got stopped in cache.img step.. i have waited for long.. it was showing same status. that's y i removed the cable from it.
Kumarankav said:
no bro i did not flash a pit file.. i just flashed the md5 file from the firmware zip on pda. the flashing did not occur, it was got stopped in cache.img step.. i have waited for long.. it was showing same status. that's y i removed the cable from it.
Click to expand...
Click to collapse
Your initial problem of bootloop could have been easily solved, I don't know what the other people do but when I gave my custom rom installed phone to my brother for a couple of days his friends played with it walla.. Bootloop.. Fix as usual was easy, a cache and dalvik wipe fixed it otherwise a nuke script and a flash would have worked.
But pulling the cable out before flashing is completed or unless terminated by the app itself is a bad thing to do, really bad...
Sent from my GT-I9100 using xda app-developers app
Service centre. You're paying.
I took my mobile to samsung service center, they checked and told that i need to change the motherboard.. which costs Rs.8500..
Kumarankav said:
I took my mobile to samsung service center, they checked and told that i need to change the motherboard.. which costs Rs.8500..
Click to expand...
Click to collapse
Maybe you can buy another on eBay,then you'll just give it to them to replace.Or change it yourself.Both ways you'll save money
Just get a jig and try.
Sent from the little guy
Hi.
Please read all of what I tried before suggesting something.
I have a S3 GT-I9300 international version. It's from Orange Israel and its warranty recently ended.
All of what I tried below has been done with the phone in the Download mode by turning it while holding the power, volume down and the home key, there is absolutely nothing else this phone can do, if I just normally power it on it'll get stuck on the Samsung Galaxy S3 screen, I can't even get to the animated Samsung logo. Kies is uninstalled completely and I have no AV.
Now here is what I tried so far:
1. Most forums said that I could try a regular flash via Odin by inserting the firmware.md5 file into the PDA section and flashing it, but that just makes Odin get stuck on the process (Setup Connection...) or give me this error [1st screenshot from the left]
2. I also tried attaching the .pit file for my 16GB S3 named (GT-I9300_mx_20120220.pit) alone but that makes Odin get stuck on this process as well [2nd screenshot from the left]
3. I tried attaching both .md5 and .pit files at the same time but it just also gets stuck on the (Setup Connection...) forever. And when I say stuck I don't mean Odin stops responding, I mean it just hangs on that process.
4. I looked in forums even more and they suggested I try different USB ports or cables and I did, still nothing.
5. I tried different Odin versions for all of the things I already tried.
6. I tried flashing different firmware versions for all of the things I already tried.
7.1. I downloaded Heimdall Suite and I tried to use it since a guy mentioned it helped him immensely by him just installing the drivers using the "zadig.exe" file and choosing his S3 from the All Devices list and installing the driver, however I encounter something different because the program has Replace Driver option that gives me this error [3rd screenshot from the left]
7.2. I later discovered that I can install the driver anyway by clicking the arrow next to the button and choosing Install WCID driver, that worked successfully, however it hasn't solved my problem like the guy on the forum, for him, the S3 started to get recognized by Odin and it flashed his device successfully, for me, it still gave me that error.
8. After I installed the driver from Zadig I launched Heimdall Suite in hopes of finally flashing my device but it gave me this error when trying to load up the .md5.gz [4th screenshot from the left]
9. I then proceeded to add the .pit file I downloaded earlier into the Flash tab in Heimdall tool and adding the boot.img because I think that should be enough to get it going, plus I don't know what else to put. It gave me this error [5th screenshot from the left]
I'll keep updating this post when I try new stuff, however I would like you guys to suggest things I haven't tried before or supply me with files I haven't found already (.pit files, firmwares I'm not aware of, etc.). Would appreciate any little help of sorting this problem out, the warranty ended so I don't know what am I gonna do if I don't get it fixed :/
Thanks.
=/
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Yep sounds bricked. If that's the case, send for repair. Your NAND is probably borked.
Out of interest, what does all the info on the screen say in download mode?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
XYMan28 said:
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YEes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Does that give you any idea of what I should try next?
I really want to put repairing the phone to the absolute last option.
Click to expand...
Click to collapse
The problem with the S3 is that there really aren't many options before the last option. From what I can see, you have already tried them all.
It tells me you haven't got SDS, but we already knew you had a NAND issue, regardless of that. It was just a matter of interest.
JJEgan said:
Remove Kies = remove USB drivers Odin may not work .
PIT can kill your phone .
I don't think its SDS more like your flashing PIT has bricked the phone .
jje
Click to expand...
Click to collapse
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
XYMan28 said:
I didn't mention that I also tried all of what I tried with Kies installed.
And it is SDS, I was just browsing through photos and the phone just locked up and restarted and couldn't get passed the GALAXY S3 flash screen, which is why I started trying all this crap, including flashing PIT. And the symptoms and behavior of the phone hasn't changed since the first time it restarted on me. So I definitely didn't change ANYTHING to the phone whatsoever.
Click to expand...
Click to collapse
It could be SDS. We've seen a few failures like this where download mode doesn't show SDS symptoms. It doesn't mean the result is not SDS. Its uncomfirmable.
SDS possible , Nand damaged itself possible but 90% of problems are user error .
That error is often in trying to smash their way out of trouble avoiding the simple correct method and throwing everything at the phone .Following stuff from multiple forums then asking help on XDA at the end when it is to late .
Whatever you have done in the past right or wrong does not matter it is now a service centre job .
Samsung generally offer 24 months limited warranty but would be likely to reject due to custom rom count .
jje
Hello, Today my friend gave me his I9300 to fix because it could not startup. What is happening: when I press power button I see first galaxy s3 welcome screen and then its shutdown or restarts and give again this first screen or it just froze on it. So first I flashed via odin latest CWM, then I tried to flash slimbean ROM 4.4. Try to do as written in instructions, first wipe, format, then flash, but when I try to flash phone just restarts and freeze on that first startup screen... Thats all... But intresting part is that when my friend took his phone to cutomer service to repair it, because he bought new phone like in 2013 december, they said that motherboard is bad, it just burned out because he downloaded some bad programs and that cause motherboard failure... But my friend always download his apps from playstore, so I think that is impossible to cause motherboard failure by playstore apps... And custom services not repairing it for free, they asking like almost 200USD in my country to repair it... So my friend just gave me his phone to try to fix... Any ideas?
PS when I tried flash via odin stock 4.3 I got error:
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And I get BIG RED "FAIL" :/
I tried once again flash via odin, now it when successfuly BUT... When phone restarts and appears android icon with filling up blue bar it just go like 1/3 and freeze, then restarts and again android icon and at 1/3 it just freeze.
I tried again flash CWM and flash slimbeans 4.4 ROM, now it just flashed good, then I reboot phone and still... It is going restarting nonstop... Does it really coud be that motherboard burned ?
Flash full stock rom with odin then boot into recovery and factory reset.
Probable that efs or other partition is corrupt.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Flash full stock rom with odin then boot into recovery and factory reset.
Probable that efs or other partition is corrupt.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I tried again flash stock via odin but no luck. This time when flash is passed and I get android icon with filling bar, this time it when fully and then froze and phone restarts, but now when I try to power it up after first welcome screen I get lying down android with red triangle and after some time phone shutdowns... And I cant get into stock recovery I get that android with red triangle..
When I try again flash stock via odin, sometimes I get FAIL when writing system sometimes it goes success but still cant power it on
Still trying to boot it but no luck... One time it looks almost wanted to startup because I was able to hear sound of welcome and logo starts showing but froze on very few frames of logo and then restarts....
scorpio1991 said:
Still trying to boot it but no luck... One time it looks almost wanted to startup because I was able to hear sound of welcome and logo starts showing but froze on very few frames of logo and then restarts....
Click to expand...
Click to collapse
Has a last resort try Rescue Firmware Recovery >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 <<
tallman43 said:
Has a last resort try Rescue Firmware Recovery >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 <<
Click to expand...
Click to collapse
Thank you very much for your post, I will try it ASAP
I tried 4.1.2 version but I get FAIL on odin while trying write system... I am going to try 4.3, maybe it works
I also tried 4.3 version, flashing via odin was successful but still froze on android icon with filling blue bar or make bar full then restarts phone and again shows that android icon with filling bar ... I do not know what else I can do
I read that maybe flashing 4.0.4 might help but I could not find working download link...
Flashed stock 4.0.4 but still, forever restarts, come up to android with filling bar and then restarts after some time :/ I dont know what else I can do...
up
If rescue firmware failed then emmc chip is probably toast, new motherboard required.
Sent from my GT-I9300 using Tapatalk
Where I can get new motherboard? And is it very difficult to change it?