[Q] No vibrate. Software or hardware? - Galaxy S III Q&A, Help & Troubleshooting

Hey guys. Having trouble with the vibrate on my S3 i9305. No vibrate/haptic feedback
Can anyone tell me if there is a reliable way of testing this?
Flashed my phone for first time last night and was working before.
Have tried ParanoidAndroid and Ripper ROM. Both don't give me vibrate. Also no vibrate when in CWM, but unsure whether there is vibrate there normally there anyway (CWM 6 with touch support)
I did drop the phone yesterday also, so is 'possible' that it needs a new module, but would prefer to find whether it is a hardware problem before I start ordering parts and pulling thing apart.
Any ideas, much appreciated

This is I9300 not I9305 forum .
I would wipe phone and return to stock first then test .
jje

That sounds like it could be hardware problem due to falling.
But try JJEgan's tip first before buying new part.

Hey guys. Just thought I'd update. Yup, after one month of ownership the vibrate had indeed dies, must admit, it never felt 'full power' before. New part in and better than new. Yeah, could have done it on warranty, but then I'd have to send it away.
Thanks for your replies, in future shall try and get it in the right forum, but am guessing this 'll be the same as for the i9300 as for the i9305.
Interestingly the vibrator I pulled out had Rev0.6 printed on it, where the one I put in had Rev0.0

Hutchism said:
Hey guys. Just thought I'd update. Yup, after one month of ownership the vibrate had indeed dies, must admit, it never felt 'full power' before. New part in and better than new. Yeah, could have done it on warranty, but then I'd have to send it away.
Thanks for your replies, in future shall try and get it in the right forum, but am guessing this 'll be the same as for the i9300 as for the i9305.
Interestingly the vibrator I pulled out had Rev0.6 printed on it, where the one I put in had Rev0.0
Click to expand...
Click to collapse
Good you got it working, yes I9300 & I9305 have the same forum. I don't have a clue about different version(?) numbers.

Hutchism said:
Hey guys. Just thought I'd update. Yup, after one month of ownership the vibrate had indeed dies, must admit, it never felt 'full power' before. New part in and better than new. Yeah, could have done it on warranty, but then I'd have to send it away.
Thanks for your replies, in future shall try and get it in the right forum, but am guessing this 'll be the same as for the i9300 as for the i9305.
Interestingly the vibrator I pulled out had Rev0.6 printed on it, where the one I put in had Rev0.0
Click to expand...
Click to collapse
Good that you fixed it.. But if you ever want to check that next time.. Dial *#0*# in your phone app, and that will launch the Test screen. There you can test if your phones hardware like lcd, vibration, sensors, speakers etc are working or not.

Related

Phone Permanently Bricked?

Please bare with me.
This is the second time this particular problem has happened to my device.
So I was on the tram coming back from my maths exam today.
(Running a ROM with Hardcore's SpeedMod K2-15)
I decide to change the song, all of a sudden, my screen turns black and I can't turn my phone back on. I as soon as it happened I thought uh oh. (the battery was at 74%.
So I tried to reboot my phone, didn't work.
Tried to get into download mode, didn't work.
Tried to get into recovery mode, didn't work.
Went to see if anything happened if I put in my charger AND USB cable. Both instances nothing happened.
When the incident happened last time, I was about to have it shipped to Samsung, was in the car on the way there and I was still pressing the power button in hope that it would work. Low and behold, it turned on, I flashed a different ROM and kernel and was on my merry way until today.
After browsing Q&A for around an hour the only other instances I've found with this problem are my original thread (around a month ago) when the same problem occurred.
http://forum.xda-developers.com/showthread.php?t=1302645
And another one I found today whilst browsing.
http://forum.xda-developers.com/showthread.php?t=1289063
also here
http://forum.xda-developers.com/showthread.php?p=18139062
So up to my knowledge this seems like a problem that isn't only a one off if I'm not the only one reporting it.
Is there anything I can possibly do to fix my phone or something to avoid doing so others don't run into the same unfortunate set of circumstances?
PS. two days ago I deleted a few folders on my USB storage as they were taking up too much storage space. I doubt they had anything to do with the problem though and that's the only difference I can think of that MAY have trigged the event. But I have no reason as to why it happened. I am also using NoMoarPowah and Chainfires3D mod (which I've been using for ages and i'm sure had nothing at all to do with the problem)
hopefully someone knows of a definite solution. :\
Wow the same thing is happening to my phone as well. Thanks for the detailed description. Hopefully we'll find a response soon. Also, I would suggest you investigate the volume of chode in the nearby vicinity of your phone, may be a problem (personal experience)
I just dropped mine off a stepladder in kfc, and i'm experiencing the same problem. Avoid doing this. Hopefully someone else has a better solution to your problem but for now, just don't drop it off any stepladders.
x0x0 leopardkitty69
pokergirl said:
You spelt bare wrong
Click to expand...
Click to collapse
I've made similar mistakes in life. You don't want to mix them up at the wrong time. *Shows bear scars*
leopardkitty69 said:
I just dropped mine off a stepladder in kfc, and i'm experiencing the same problem. Avoid doing this. Hopefully someone else has a better solution to your problem but for now, just don't drop it off any stepladders.
x0x0 leopardkitty69
Click to expand...
Click to collapse
ALSO Don't dinosaur with it, nor allow for sluts to touch it xoxoxoxoxoxoxoxoxox bb <3
pokergirl said:
last edited by pokergirl; today at 01:04 pm. Reason: I did it wrong!
Click to expand...
Click to collapse
you're doing it wrong!
Too late for the sluts, they're all over it! x0x0x0x0x0x
H3h3
H3h3h3h3h3h3h3h3h3 its ****ed darl <3 xxxxxx
Leopardkitty69 stop degrading urself g1rL g3t urs31f @ [email protected] xo
- A girl who knows how to control balls
leopardkitty69 said:
I just dropped mine off a stepladder in kfc, and i'm experiencing the same problem. Avoid doing this. Hopefully someone else has a better solution to your problem but for now, just don't drop it off any stepladders.
x0x0 leopardkitty69
Click to expand...
Click to collapse
I dropped it quite hard and it caused corruption on /efs partition.
lol'd
This thread has suddenly become a lot more interesting.
pokergirl said:
Through implementing my CAS 89 values and inserting chode = 2x length into my TVM solver i introduced the viagra into my phonem therefore, bringing its pwoer to 9001 and causing for it to groan in pleasure. Through utilising square volume = 2 * x * l with x = your vaginas length and y = The radius of your arsehole i solved this problem. (Personal experience, for more information visit (it made me delete the link))
P.s chodemaster - Your personal experience is obviously limited and incredibly detrimental to the phone. When YOU have caught all 151 original chodes you should post in this forum in a SERIOUS and well rounded individual manner
P.P.S NEED MOAR PYLONS
P.P.P.S THIS IS YOUR BIRTHDAY CARD FOR NEXT YEAR
Click to expand...
Click to collapse
Sigh I really need a solution. Not thread spam >.<
This sounds like a serious issue with your phone's hardware. You should return it to Samsung.
with the phones hardware itself?
If they manage to fix it do you think the'll notice it's been rooted?
I've removed the triangle and reset the flash count i've just got a new ROM on it.
(as in will it still be under warranty)
If you manage to reset the counter and get the original stock rom on it (or a new version which was meant for your device and came by kies) you should be perfectly fine, just don't root it again (until you get it back, that is).
Freakgs said:
If you manage to reset the counter and get the original stock rom on it (or a new version which was meant for your device and came by kies) you should be perfectly fine, just don't root it again (until you get it back, that is).
Click to expand...
Click to collapse
but it currently won't turn on at all ;|
giga502 said:
but it currently won't turn on at all ;|
Click to expand...
Click to collapse
In that case chances are very high that Samsung will simply replace it, given that they probably won't be able to turn it on, too.
That's what I've heard from many people atleast, who had issues turning their devices on.
Only way to find out: see if you can get warranty.
Other option: be honest that you rooted and hope for the best, yet I don't know how Samsung staff would react to that, probably not too good.
Ps:
I take it that you have a JIG and tried that one already? As you stated, that you did reset the counter.
Freakgs said:
In that case chances are very high that Samsung will simply replace it, given that they probably won't be able to turn it on, too.
That's what I've heard from many people atleast, who had issues turning their devices on.
Only way to find out: see if you can get warranty.
Other option: be honest that you rooted and hope for the best, yet I don't know how Samsung staff would react to that, probably not too good.
Ps:
I take it that you have a JIG and tried that one already? As you stated, that you did reset the counter.
Click to expand...
Click to collapse
I've given it to a friend but I highly doubt it would work. Anyway for now, I'm going to place it in rice JUST IN CASE there is a tiny bit of moisture on some part of the motherboard which is messing things up. If that dosn't work i'm going to go down to my mobile dealer and hope for the best
thanks for your help!
One question: Did you pull the battery, and put it back in?
I have had this sometimes before, it seems to be caused of overheating... But I'm not 100%. I have checked Logcat but nothing in there of interest.
ante0 said:
One question: Did you pull the battery, and put it back in?
I have had this sometimes before, it seems to be caused of overheating... But I'm not 100%. I have checked Logcat but nothing in there of interest.
Click to expand...
Click to collapse
no I havn't done that. I'm taking it back later today

Back from repair : no more random reboots but dock not working !

So I sent my Atrix for repair as I couldn't stand the random reboots. It came back unfixed. I sent it again, this time warning Motorola that I wouldn't be ok with it coming back unfixed again and so it got back finally fixed.
However, the phone doesn't recognize the multimedia dock anymore ! Media center through HDMI works fine but not the dock : the phone doesn't charge nor does the audio work through the speaks I plug the dock to.
Do you think this is a software issue or an hardware one, something they messed up while repairing it.
If I have to send it one more time, I'll go nuts...
Thanks !
DannyBiker said:
So I sent my Atrix for repair as I couldn't stand the random reboots. It came back unfixed. I sent it again, this time warning Motorola that I wouldn't be ok with it coming back unfixed again and so it got back finally fixed.
However, the phone doesn't recognize the multimedia dock anymore ! Media center through HDMI works fine but not the dock : the phone doesn't charge nor does the audio work through the speaks I plug the dock to.
Do you think this is a software issue or an hardware one, something they messed up while repairing it.
If I have to send it one more time, I'll go nuts...
Thanks !
Click to expand...
Click to collapse
I'd guess that those things worked when it left, but not when it came back, that it would be a hardware issue if the software was unchanged. Just a thought though, do you have any mods installed or are you running a pure stock ROM?
Maybe they've noticed CM7 is better than their stock and they flashed CM7. :highfive:
lehjr said:
I'd guess that those things worked when it left, but not when it came back, that it would be a hardware issue if the software was unchanged. Just a thought though, do you have any mods installed or are you running a pure stock ROM?
Click to expand...
Click to collapse
Pure stock. And yes, it was working before it left for repair...
DannyBiker said:
Pure stock. And yes, it was working before it left for repair...
Click to expand...
Click to collapse
In that case I would say it's very likely that they broke something else. Their Facebook staff may be able to put you in touch with someone who can help as well as they seem to have access to people that the CSR's don't, or they may just delete your post. Motorola's Facebook did have a large number of complaints regarding issues with repairs a couple months ago, but they suddenly disappeared, most likely due to trying to do damage control (reputation management). There's also their forums, where the discussion of anything other than stock functionality is pretty much taboo. But yes, if it worked before, it should work now.
lehjr said:
In that case I would say it's very likely that they broke something else. Their Facebook staff may be able to put you in touch with someone who can help as well as they seem to have access to people that the CSR's don't, or they may just delete your post. Motorola's Facebook did have a large number of complaints regarding issues with repairs a couple months ago, but they suddenly disappeared, most likely due to trying to do damage control (reputation management). There's also their forums, where the discussion of anything other than stock functionality is pretty much taboo. But yes, if it worked before, it should work now.
Click to expand...
Click to collapse
Was it sent in on warranty or did you pay to have it fixed. Either way I feel for you because I know I sent my 2 atrixes in total of 3 times and even though they were fixed/replaced under warranty I still paid about $45 shipping in the end. Everyone on atrix forums keeps praising motorola build quality but I have failed to see it in mine or my wife's atrixes.
affiatic said:
Was it sent in on warranty or did you pay to have it fixed. Either way I feel for you because I know I sent my 2 atrixes in total of 3 times and even though they were fixed/replaced under warranty I still paid about $45 shipping in the end. Everyone on atrix forums keeps praising motorola build quality but I have failed to see it in mine or my wife's atrixes.
Click to expand...
Click to collapse
I think we're starting to see quite a few cases of storage related failures. I am a bit perplexed as what some consider to be qualifying characteristics of "build quality" myself.
lehjr said:
I think we're starting to see quite a few cases of storage related failures. I am a bit perplexed as what some consider to be qualifying characteristics of "build quality" myself.
Click to expand...
Click to collapse
I myself see having to send them in on hardware issues within the 1st year as poor build quality. A new replacement they sent me froze on GPS then would not boot past moto screen as if it bricked itself. Was replaced with another new one after another 15$ I paid for shipping
I think some think USA company means quality. My new atrixes shipped from Mexico
Yeah, I'll have to pay to send it back again as well...
Do you think it's worth trying to flash a custom rom to see if it "fixes" it ?
Thanks.
DannyBiker said:
Yeah, I'll have to pay to send it back again as well...
Do you think it's worth trying to flash a custom rom to see if it "fixes" it ?
Thanks.
Click to expand...
Click to collapse
No, because it's likely that they would use that in order to blame you for whatever is wrong with the device. If it's a hardware issue, no amount of third party software is going to fix it. I would however try to get in contact higher up in the chain of command regarding the issue. It's one thing to ship a device with a defect, it's another thing to have to ship the same device back and forth continuously to get it fixed. And the sad part is that this is just one of many similar stories regarding repairs. I guess that "New Motorola" just isn't quite so new after all.
lehjr said:
No, because it's likely that they would use that in order to blame you for whatever is wrong with the device. If it's a hardware issue, no amount of third party software is going to fix it. I would however try to get in contact higher up in the chain of command regarding the issue. It's one thing to ship a device with a defect, it's another thing to have to ship the same device back and forth continuously to get it fixed. And the sad part is that this is just one of many similar stories regarding repairs. I guess that "New Motorola" just isn't quite so new after all.
Click to expand...
Click to collapse
I would do a factory reset in recovery. My wife's came back with same issues it was sent in with. They replaced the screen for her. The proximity sensor still wasn't working right someone recommended factory reset from recovery. It fixed it for her. Before that I knew nothing about stock recovery
affiatic said:
I would do a factory reset in recovery. My wife's came back with same issues it was sent in with. They replaced the screen for her. The proximity sensor still wasn't working right someone recommended factory reset from recovery. It fixed it for her. Before that I knew nothing about stock recovery
Click to expand...
Click to collapse
Hmmm, I was assuming that was already done
lehjr said:
Hmmm, I was assuming that was already done
Click to expand...
Click to collapse
Yes but sometimes people don't realize there is more than one way to do a factory reset on stock. Until about a year ago I thought you could only do this through settings. Recovery is the best way I now know
A good tutorial for that ?
'Cause that's what I meant when I asked if flashing a custom ROM would help : can it be something that isn't properly setup at a software level ? I tried flashing the stcok rom again with RSDLite but it didn't delete any data so I'm not sure it really reset anything.
Thanks !
DannyBiker said:
A good tutorial for that ?
'Cause that's what I meant when I asked if flashing a custom ROM would help : can it be something that isn't properly setup at a software level ? I tried flashing the stcok rom again with RSDLite but it didn't delete any data so I'm not sure it really reset anything.
Thanks !
Click to expand...
Click to collapse
You mean a guide to factory reset the device in recovery? I thought that was in the manual, but it isn't, although I did find it here.
So I did a factory reset from Recovery, which worked as all was wiped. However, still no luck with the dock.
The reason I asked if trying to install a custom rom was a good idea is because I'm wondering if flashing another Webtop version or the HDMI-hack could make it work. To be clear : do you think that the fact that the Factory Reset didn't work establishes that it's hardware issue ?
DannyBiker said:
However, the phone doesn't recognize the multimedia dock anymore ! Media center through HDMI works fine but not the dock : the phone doesn't charge nor does the audio work through the speaks I plug the dock to
Click to expand...
Click to collapse
As you're able to attach the HDMI and this works are you sure it's not the dock that's faulty? Had a quick look around and came across this... http://www.atrixforums.com/forum/mo...my-hd-multimedia-dock-useless-without-tv.html also, have you tried to clean ect connectors/ports. Might be worth a try
I should try again but I have two docks and the other one doesn't work either. However, I do feel that the AC connector doesn't feel really stable when inside the dock..it just moves around. I'd have to try with the the other's dock AC cable but it's an UK one and I need an adapter.
The thing is that the dock wasn't touched while the phone was under repair so I don't see how it can break just like that.
As I stated before, connection through HDMI to a TV-set works fine as well as charging with the power cord.
EDIT : saw the link you shared and it feels like the exact same issue indeed !
Well, it's fixed...kinda.
I unlocked it and flashed the "fixed webtop addon" from CSROM. It still wasn't working but with it, I got that the message saying that the device was not in charge anymore when I disconnected from the dock, which it didn't before; it wasn't charging however.
I don't think that was relevant but then I decided to give a look at the dock again and removed the top of it and...tadaaa, it worked ! From what I understand, the dock's connectors were not entering the the phone's inputs enough. I still think it's because they ****ed up during repair but heck, I won't send it back for that...
Good to hear you got it working

[Q] S2 with broken/not working screen - how to tell if the rest still works?

Hi
I recently bought a broken Galaxy S2 with a non-working display/screen off a swiss auction portal (smiliar to eBay) for very little money.
The seller stated that the display broke after he dropped it, the rest of the phone should be fine. Effectively, only the LCD is broken, the glass is intact, but the screen doesn't show anything when I try to turn on the phone.
The first few times I tried to turn on the phone, nothing happened, no boot sound or touch buttons glowing. After trying several combinations of pressing buttons (hard reset, soft reset, download mode, recovery etc.) I heard the boot sound and saw the buttons glowing, but only once and I dont know how I exactly managed it to start. But, nevertheless, I can't really see what the phone is doing, if it is booting, if its in download mode, etc.
Does anyone have an idea, what I can/should do to make sure, the phone itself is working and its only the display which is broken? I just don't want to spend over $100 for a new display, if im not sure if the rest works...any suggestions?
Thanks very much for your help guys!
Greetings from Switzerland!
nkb88
How can anyone answer if the phone is going to be worth the cost of a new screen.It could be water damaged or blacklisted,or faulty.
Did you not foresee these things.What did you expect to happen.You must have trusted the seller,but all of a sudden you have doubts.Why didnt the seller replace the screen.
You probably think youve scored,when in fact it could work out more expensive than buying a working phone.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
How can anyone answer if the phone is going to be worth the cost of a new screen.It could be water damaged or blacklisted,or faulty.
Did you not foresee these things.What did you expect to happen.You must have trusted the seller,but all of a sudden you have doubts.Why didnt the seller replace the screen.
You probably think youve scored,when in fact it could work out more expensive than buying a working phone.
Click to expand...
Click to collapse
First of all, the mentioned auction platform is very small and not quite comparable to eBay, maybe it was my fault to make the comparison to eBay. Its much smaller, only people from Switzerland and people much trustworthier than on eBay. I talked to the seller even before I commited my bid on the phone, and he told me he already bought another one and the place, where he first wanted to repair it, told him, it would be more than $200, which wasnt an option for him...
The phone was very cheap, only about $25 - due to the fact that the sellar put it in a wrong category (mobile accessoires but not mobile devices itself) so almost nobody beside me bidded for the auction. There are several other Galaxy S2s with broken displays for sale, which sell at least for $50-70, rather between $100-150.
So to put it straight: I just bid for the phone because its cheap and, if the display is replaced and the phone is fully working again, the potential selling price is much higher than what I payed for the phone and the display together.
Now, I was just wondering, if there is a possibility to tell, if the phone boots normally and to be sure that the display is the only faulty part...
If you know what network it's on, and you can find a way to get it switched on, you can put a compatible sim card into it and call it....if the phone rings (provided the volume is set right) you can assume it's good.........
That is.....assuming there's charge in the battery.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Ok I see now.
All you need to do then is to relist the phone on that auction site you said....in the proper area/listing....and you could make a profit without risk.
You could put it in dl mode and see if it is ready to take a flash.Or see if someone could hook up a screen to test,or see if you can borrow one/get sale or return.
And people on here help with tech problems,not get rich quick schemes......LOL
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Ok I see now.
All you need to do then is to relist the phone on that auction site you said....in the proper area/listing....and you could make a profit without risk.
You could put it in dl mode and see if it is ready to take a flash.Or see if someone could hook up a screen to test,or see if you can borrow one/get sale or return.
And people on here help with tech problems,not get rich quick schemes......LOL
Click to expand...
Click to collapse
Actually I could have bought the phone and relisted it in the proper category, you are right on that BUT I acually don't have any interest in making money with this phone, if it is fully working again, I probably will give it to my GF cause her crappy iFone will probalby be moving to the bin soon... You really probably missunderstood me in this case...
But thanks for you help! I'll see this evening if I can put it in download mode...
keithross39 said:
If you know what network it's on, and you can find a way to get it switched on, you can put a compatible sim card into it and call it....if the phone rings (provided the volume is set right) you can assume it's good.........
That is.....assuming there's charge in the battery.......
Click to expand...
Click to collapse
Thats also a good idea BUT afaik you need to enter a PIN code before the phone actually connects to the carrier/provider, isn't that correct?
Not necessarily......unless the phone has been set up that way post purchase.....as I said, you need to know what carrier the phone was with before, and simply go and get a sim card (pay as you go) for that carrier and put it in the phone....job done.
It's not necessary to enter a pin code here in the UK.....I don't know how the mobile operators operare with respect to that in Switzerland though......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
How about if you cant "borrow' a screen,just buy one off eBay from a seller that takes it back with a small restocking fee.
Then hook it up(without fixing it permanently) and see if any problems me/keith mentioned.
Look near the end of this video in this thread.
http://forum.xda-developers.com/showthread.php?p=25438587
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Okay, i managed to connect the phone to my computer and it shows up in KIES! *yay*
Unfortunately, KIES shows: "The connected device is locked..."
But, as far as this looks like, the phone is working! Am I right on this?
I dont know much about kies as I dont use it.Maybe its not an unbranded phone and youve put in a different sim its not used to.
Unless someone has a better idea,I think buying the screen under the conditions I said earlier is the way to go.It may only lose you £15 at the worst.
Check the online imei checket first though to see if it throws amything up.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
I dont know much about kies as I dont use it.Maybe its not an unbranded phone and youve put in a different sim its not used to.
Unless someone has a better idea,I think buying the screen under the conditions I said earlier is the way to go.It may only lose you £15 at the worst.
Check the online imei checket first though to see if it throws amything up.
Click to expand...
Click to collapse
I haven't put in a SIM at all, as it is not neccesary to be able to use the phone.
I will buy a screen anyway, if I can't use it myself, I will give it to a frend who has also got a smashed S2.
Another question: Is it possible to hard reset the phone, without a working screen? Afaik you have to boot into recovery and select the reset from a menu, which is not really possible without having a working display... Any suggestions?
Thanks!
Someone has just posted this utility.
http://forum.xda-developers.com/showthread.php?p=43448133
-------------------------------------------
maybe your an iphone expert
------------------------------------------
theunderling said:
Someone has just posted this utility.
http://forum.xda-developers.com/showthread.php?p=43448133
Click to expand...
Click to collapse
Thanks, but with the phone being locked, i cannot do anything, also not install any apps...
How can I reset the phone without the screen? Or can someone tell me which buttons to press in recovery menu to do a wipe/reset?
Thanks!
That in itself could cause you issues. You have to get the number of and order of presses exactly right otherwise you could end up formatting the system partition (os)
Aaaaand.....you don't know whether you're running 4.0.4 in which case, doing a wipe *may* permanently kill your phone (search emmc brickbug for the why/how)......
Realistically the only option is to obtain a screen......have you thought of taking the phone to an unofficial repairer, explaining the situation and asking for the temporary instore use of a screen? (You could even offer to pay a small fee.....just as a sweetener)
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
nkb88 said:
Thanks, but with the phone being locked, i cannot do anything, also not install any apps...
How can I reset the phone without the screen? Or can someone tell me which buttons to press in recovery menu to do a wipe/reset?
Thanks!
Click to expand...
Click to collapse
That mymobiler didnt look like an app to me.The other thing that was mentioned was an app that needed root.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
keithross39 said:
That in itself could cause you issues. You have to get the number of and order of presses exactly right otherwise you could end up formatting the system partition (os)
Aaaaand.....you don't know whether you're running 4.0.4 in which case, doing a wipe *may* permanently kill your phone (search emmc brickbug for the why/how)......
Realistically the only option is to obtain a screen......have you thought of taking the phone to an unofficial repairer, explaining the situation and asking for the temporary instore use of a screen? (You could even offer to pay a small fee.....just as a sweetener)
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
You are right - thats really too risky. As I said, i'm going to order a screen now and we'll see how things work out! Thanks for your help! I'll keep this thread updated with my progess.
Cheers! :good:
nkb88 said:
You are right - thats really too risky. As I said, i'm going to order a screen now and we'll see how things work out! Thanks for your help! I'll keep this thread updated with my progess.
Cheers! :good:
Click to expand...
Click to collapse
Got a new screen and everything is working smoothly!
Thanks for your support! :good:
PS: Any recommendable, FAST rom without too much bloatware?
Cheerio!
Lol....not gonna recommend a specific ROM as that's against XDAs rules......but if you want the stability of stock without the bloat, try one of the hybrid ROMs. Look for "samsung based" in the ROM sticky thread.....or do what I've done. ....stay with your stock firmware, but root it and debloat it.......
My Wife says I'm a phone geek.....
I'd have to agree.....

[Q] Touchscreen disaster - P7510

Okay. My boss gave me his tablet to fix and he noticed the touchscreen did not work after the ICS update in August 2012 and he missed his warranty by 3 weeks. I have been using these forums for all my phones since my HTC: HD2. I'm obviously not SUPER active and I know everyone wants you READ READ READ before making new threads. But I know how to research, flash, and apply fixes.
I used adb to push the mxt1386_fixer.zip the sdcard and I flashed it. The touchscreen remains in the same state.
MXT1386_Fixer.Zip
I read about the A1 Kernal learning that the fix was also incorporated in it and it also didn't work. I have read and read and read for over a month and nothing I flash helps. It seems that when this model updated to ICS, the problem occurred. I am currently about to downgrade to 3.2 Honeycomb as a last ditch effort because my boss is just going to put it in a drawer.
NOW. Sometimes, the touchscreen works in the home, task manager button area. but what can you do with that? Not a damn thing. There has to be something that can fix this. A lot of people simply got a replacement and I hate to recommend that he needs to just sell it for parts. I never ask for anything. [because I find the answers myself] but I need help for once.
I put CM 4.0.0.4 on it and flashed all I can find. HELP!
a_skyll said:
Okay. My boss gave me his tablet to fix and he noticed the touchscreen did not work after the ICS update in August 2012 and he missed his warranty by 3 weeks. I have been using these forums for all my phones since my HTC: HD2. I'm obviously not SUPER active and I know everyone wants you READ READ READ before making new threads. But I know how to research, flash, and apply fixes.
I used adb to push the mxt1386_fixer.zip the sdcard and I flashed it. The touchscreen remains in the same state.
MXT1386_Fixer.Zip
I read about the A1 Kernal learning that the fix was also incorporated in it and it also didn't work. I have read and read and read for over a month and nothing I flash helps. It seems that when this model updated to ICS, the problem occurred. I am currently about to downgrade to 3.2 Honeycomb as a last ditch effort because my boss is just going to put it in a drawer.
NOW. Sometimes, the touchscreen works in the home, task manager button area. but what can you do with that? Not a damn thing. There has to be something that can fix this. A lot of people simply got a replacement and I hate to recommend that he needs to just sell it for parts. I never ask for anything. [because I find the answers myself] but I need help for once.
I put CM 4.0.0.4 on it and flashed all I can find. HELP!
Click to expand...
Click to collapse
Downgrade proves ZERO touchscreen abilities. Upgrading again.
a_skyll said:
Downgrade proves ZERO touchscreen abilities. Upgrading again.
Click to expand...
Click to collapse
4.0.4 provides the best touchscreen capabilities this thing will allow and I realized the touchscreen immediately reacts to my touch on the left and right sides only. the middle is shot. Thought if I could install TouchScreenTune, I could mayyyyyyyyyybe help re-calibrate the dead area and aid this issue. But I think it's done. Because the screen is only dead in the middle, it may just need a new screen and digitizer. With this tablet being very old news now, I doubt it's worth it.
If you can open it, you may need to check if the digitizer is properly connected. What you are describing sounds like a case I came across once here which the owner solved when he opened it and discovered that the connection had somehow shifted and by simply reconnecting the digitizer more firmly, the problem was solved.
Cheers.
Sent from my GT-P7500 using xda app-developers app
It was the digitizer strip the whole time. The whole left side was hanging out of the port. I gave the tablet back to my boss for christmas. He was happy and although he didn't pay me a dime, I was glad to finally fix it. So thank you!

I cant re-boot into recovery after changing motherboard and then an update.

Hello all,
My first post here and I cant really think of a better place where I might get help beyond the endless trawling through the internets. I have already done. My hair is going even more grey!
I have a problem that I just cant work out.. I have already spent far too many hours trying to find ways to fix. So its best I ask here and maybe someone will know how to fix it.
I have a Note 2. Owned it since new and its been fantastic, does everything I need out of a phone and I want to keep it working. I have no interest in buying a new phone ( nor that I can afford it! )
About 6 weeks ago it died after I had let the battery run flat over night. It just would not turn on. I tried all the internet fixes and nothing worked. Sudden death syndrome I think its called. Fairly common with these I have learned.
I bought a new motherboard from China on Aliexpress. Good feedback from seller. $35. It arrived two weeks ago. I swapped the motherboards and the new one worked. I had to change the phone over to English and re-load my favourite apps, exciting.. just like getting a new phone again
It worked well enough and I was happy. I noted that in the about section, plus in the apps draw, SUPERSU. I looked this up and figured that maybe the main chip had been rooted. Possibly that the motherboard was atually a fixed secondhand one, possibly they use another chipset that needs rooting to work? I don't know but it worked so I left it.
One thing that did annoy me was that when I connected my phone via USB to the laptop (a Samsung) the photo thumbnails would not show up like they used to. I looked this up and it was common. I suggested fix was to look for phone updates on Kies.
Then about 4 days ago I decided to install Samsung Kies onto my computer and update the phone. It said there were updates to install and I clicked go.
I went through the process and it all looked good until when the update process said it had finished. Then the phone just started to flash the Samsung symbol on and off, spaced every two seconds. Bugger!
So I tried a recovery mode on kies, that did not work. I tried booting into recovery (all three keys, volume up) and it does nothing at all. Samsung just keeps flashing on and off. I have tried everything!
However- it will boot into download mode so I have tried reloading the correct Samsung firmware back on with Odin three, several times! Everytime when it re-boots it just flashes. Cant get into recovery.
This is now where I am at. I want to know how to get into recovery via my PC. Maybe through some program. But I don't know how. I'll happily load on a new ROM but not sure which and most seem to need me to be able to change some settings within the phone first...which I cant obviously do. I have looked into Omegadroid and Lineage which both appeal. But there seems to be no way I can load them on from where I am at with this phone.
I am hoping that there some sort of program I can use to 'hard re-set' or wipe the phone completely start again?
Any help and suggestions very welcome. I am not at all adept at programming so keep it all in laymans terms (I have already learned so much in the last few days that my brain might well explode!)
Thank you in advance,
Alex
yoeddynz said:
I bought a new motherboard from China on Aliexpress. Good feedback from seller. $35. It arrived two weeks ago. I swapped the motherboards and the new one worked. I had to change the phone over to English and re-load my favourite apps, exciting.. just like getting a new phone again
Click to expand...
Click to collapse
Hi Alex, Welcome to XDA-Developers!
It sounds like your Note needs a full wipe indeed. But first, I wouldn't have used AliExpress if I were you! These Chinese shops cannot be trusted when it comes to spare parts.
It worked well enough and I was happy. I noted that in the about section, plus in the apps draw, SUPERSU. I looked this up and figured that maybe the main chip had been rooted. Possibly that the motherboard was atually a fixed secondhand one, possibly they use another chipset that needs rooting to work? I don't know but it worked so I left it.
Click to expand...
Click to collapse
It's very possible that the mother was a second hand one. So, so it might have been rooted by the last owner.
However- it will boot into download mode so I have tried reloading the correct Samsung firmware back on with Odin three, several times! Everytime when it re-boots it just flashes. Cant get into recovery.
I am hoping that there some sort of program I can use to 'hard re-set' or wipe the phone completely start again?
Click to expand...
Click to collapse
Actually, this is what Odin software really does. If it fails, I'm afraid you'll have to take it to a repair shop again. Or maybe you can try another firmware. If you can remember the build number that was in "About" section before you flash it with Odin, then we could figure out what you were using in the first place. Perhaps by installing the firmware of that build number, you'll get it to boot.
And oh! The correct recovery mode combination is "HOME + Volume Up + Power Button". You mentioned "All three buttons + Volume Up" (4 buttons ?!), I assume then that you meant "HOME + Volume Down + Power + Volume UP"
Hey thanks for the reply- sorry for the late reply back..
When I plugged it into Kies I had no intention to do anything other than a usual Samsung update so I didnt look up the build number or any other info beforehand.
Well..that is one leasson learned!
Yeah- it was a typo when I said what keys I pressed. In order to try and get into the recovery mode I did indeed press 'home, power and volume up'. But nothing ever happens... the Samsung symbol just keeps on flashing away...mocking me
Is there any other program out there that I could try? I downloaded a program called Z3X Samsung tool. Used for flashing I believe? It installed fine but when activated, with the phone connected in download mode all I got was a prompt saying 'Cant find chip'
yoeddynz said:
Hey thanks for the reply- sorry for the late reply back..
When I plugged it into Kies I had no intention to do anything other than a usual Samsung update so I didnt look up the build number or any other info beforehand.
Well..that is one leasson learned!
Yeah- it was a typo when I said what keys I pressed. In order to try and get into the recovery mode I did indeed press 'home, power and volume up'. But nothing ever happens... the Samsung symbol just keeps on flashing away...mocking me
Is there any other program out there that I could try? I downloaded a program called Z3X Samsung tool. Used for flashing I believe? It installed fine but when activated, with the phone connected in download mode all I got was a prompt saying 'Cant find chip'
Click to expand...
Click to collapse
Hi,
I don't think there is any other tool you can use besides ODIN. The Z3X Software appears to require a flashing hardware (the box). In order to be able to flash your device using this tool, you'll need that box first. So, your best shot right now is to take the phone to a repair center. They often have device flashing hardwares (like the Z3X box) which provide convenient results but ultimately costs few bucks (compared to ODIN which is free if it works for you).
One last explanation to what your device is experiencing is that the motherboard is somewhat not working again. I really don't like this one either, but you can't ignore it. If you had bought it from a local shop or repair center, perhaps they could have assisted you in the current situation or maybe they could have even replaced it with another one.
I hope you'll find a way to revive your Note 2. There isn't much I can suggest anymore right now, as I have moved away from Samsung since 2014 (I owned the Note 2 aswell! Great device at that time).
Nonta72 said:
I hope you'll find a way to revive your Note 2. There isn't much I can suggest anymore right now, as I have moved away from Samsung since 2014 (I owned the Note 2 aswell! Great device at that time).
Click to expand...
Click to collapse
Yeah thanks. I'll try the repair centre in the city next time I visit the big smoke. The phone certainly worked well for me but if its indeed dead, again, all is not lost because things have moved on and its bloody amazing what phones one can get now for half what I paid when I bought the Note 2.
If I get it fixed I'll certainly post up a reply with details just to help add to the info on this thread that might help other Note 2/Samsung owners in a similar way.
yoeddynz said:
Yeah thanks. I'll try the repair centre in the city next time I visit the big smoke. The phone certainly worked well for me but if its indeed dead, again, all is not lost because things have moved on and its bloody amazing what phones one can get now for half what I paid when I bought the Note 2.
If I get it fixed I'll certainly post up a reply with details just to help add to the info on this thread that might help other Note 2/Samsung owners in a similar way.
Click to expand...
Click to collapse
Exactly!
That's the whole spirit of XDA.
Thank you for understanding and good luck. :fingers-crossed:
Ok people of XDA. Here's and update. So I had no luck getting my Note 2 working again. I then bought a brand new Note 4 to see me through and that turned out to be a load of grief too....(Note 4 not liking the Marshmallow update and constantly freezing or rebooting, often every few minutes) oh my. When will the hurting stop?.... but that's another story kids
Anyway- while the Note 4 was out of action I decided I'd better sort the Note 2 out. I ordered another mother board from Aliexpress but before ordering I went through the available board listings, sent the same question off to each seller asking about any potential issues similar to what I have experienced with my current board and waited for replies. The seller that answered with the best reply that gave me some confidence got the sale. Another $35 NZD and this time it actually arrived after about 8 days from ordering.
I fitted the new board and as soon as the phone turned on, changed the language to English and promptly turned auto updates off- just in case.
Its been running perfectly ever since with no problems at all. After the fiasco I have now been having with my Note 4 (which has now been replaced thank fark) using the old Note 2 feels somewhat like jumping from a modern car with all the bells and whistles but too much to go wrong, into a nice old classic that is simplicity itself.
So now I'm off to look for answers on why the hell my Note 4 constantly wants me to download another update just after I have installed the last one.............
Alex

Categories

Resources