HI ,
im thinking about adding wireless charging to my nook , i know it can be done ive already read the nook color post on xda here. my concern though is that the specs of the gear im looking at at 700 mv and i know the tablet normally needs 2.1 amp to charge. i have the same problem as most the cables are fu*k*ng GARBAGE and im tired of wasting my time going to stores, ill crack mine open and just solder in the wireless QI pad instead.
BUT
i want to charge my tablet at its normal pace 2.1 amp not the .7 that the pad i am looking at for my sgs 3 has, i was going to just buy two of the qi pads off ebay but is their one that i can get that will do 2100 milliamp instead of the 700 milliamp one i saw for my sgs3 ?
i mean it will charge at the trickle charge pace but i want it up to speed
any thoughts or links ? im ordering parts monday.
thanks
Nothing ? Well parts are on their way ...anyone have any idea where I need to look ? Inquired with the gent who did the NC but no response will post update after I break it then fix it
Sent from my SAMSUNG-SGH-I747 using xda premium
Wow sounds interesting please keep us up to date with your advance. I'm not brave enough to open my NT and mod it but if all goes well with you I might give it a try. Good luck man
Sent from my Galaxy Nexus using xda premium
iferlive said:
Wow sounds interesting please keep us up to date with your advance. I'm not brave enough to open my NT and mod it but if all goes well with you I might give it a try. Good luck man
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
will do , the back is super easy to get off a guitar pick and torx 5 the two screws at micro sd card are it then you just have to pop the back off , there is a post about NC on the NC forms , good intel for this mod but he attached power and neg to the actual micro sd port on the device i am to go to the battery instead ,
Wirelessly recharging the Nook Tablet
spydergt said:
will do , the back is super easy to get off a guitar pick and torx 5 the two screws at micro sd card are it then you just have to pop the back off , there is a post about NC on the NC forms , good intel for this mod but he attached power and neg to the actual micro sd port on the device i am to go to the battery instead ,
Click to expand...
Click to collapse
So how did it go? I'm thinking of doing the same thing with my NT. I have conductive copper tape to make the connections.
Were you able to find a decent pad to give you a 2.1 amp charge?
Thanks.
Related
Thread for hardware mods
POSTING INTERNAL tf101 pictures
like 3g dongle ? internal sd cards? ssd?
removing the battery for 2 HDD 500go?
finding sd cards hubs? usb to sata cables?
? there is a place in the tablet for a 3g dongle?
there are 2 screws under the upper rubbers and the dock open easy
there is a lot of spaces avaible
My MIFI might actually fit in there, all I would need to do is supply it power somehow.
I'm no hardware engineer though, but if thats possible it would save you from the driver issues with a 3g dongle.
I wonder if it would be possible to check which pins from the adapter connect to USB - so we can make DIY USB adapter for those without a dock.
hmm adding an hdd would be very interesting, sata won't be very hard, powersupply will be.
Sent from my O2x with CM7
This is what I was looking for, looking to do some mods to the dock.
Thanks Markolino72.
Internally mount and wire a 32gb memory stick to the USB port so you get a 32gb hard drive added whenever you dock It might even have enough room for a portable USB hub so you don't lose use of the external usb port?
does anybody think it will be easy to make a DIY dock fix for those with battery draining issues like me?
It seems like it would be relatively easy - just make a switch to either connect or disconnect the cords coming from the docking point.
Or even better, maybe if you put the correct microcontroller in there you can have it switch the pins to floating, if it senses that there is no tablet connected (not sure about the details though)...
ydnality said:
does anybody think it will be easy to make a DIY dock fix for those with battery draining issues like me?
It seems like it would be relatively easy - just make a switch to either connect or disconnect the cords coming from the docking point.
Or even better, maybe if you put the correct microcontroller in there you can have it switch the pins to floating, if it senses that there is no tablet connected (not sure about the details though)...
Click to expand...
Click to collapse
Have you seen the post in the General forum (2nd page now I think)? Posted by Asus_USA themselves, if you prove the 6 steps that your dock has the issue you can get a new one! I really do hope that I can get mine exchanged, waiting on a reply from my local service center..
Regards.
In regards to the hardware mods, that really looks amazing. Would love to put in my mifi there as well, attach it via USB to charge = your own 3g model Maybe a little modding you could get the mifi to power on only when the dock is connected (remove the battery of the mifi?) so that when it powers on it'll power on the mifi as well. Only a few thoughts.
Maybe a little modding you could get the mifi to power on only when the dock is connected (remove the battery of the mifi?) so that when it powers on it'll power on the mifi as well.
Click to expand...
Click to collapse
it's a good thought but the mifi I have (novatel 2200) wont work without the battery, for some reason if the battery is bad or removed you cannot run usb, it must be the way they have the power run through the battery or charging. Not sure if all are like this or not.
andrewklau said:
Have you seen the post in the General forum (2nd page now I think)? Posted by Asus_USA themselves, if you prove the 6 steps that your dock has the issue you can get a new one! I really do hope that I can get mine exchanged, waiting on a reply from my local service center..
Click to expand...
Click to collapse
I talked to the Asus service rep about it. They currently won't give you a new one since they have a hardware upgrade to fix it. If you wanted a new one you needed to do before they solved the problem. I'm waiting on the upgrade part to be delivered for for mine. Should in a few days.
A switch should theoretically work. The guy at the service center said the replace something that goes into the hinge of the dock. Looking at the teardown pics, you can see a wire goes into each side of the hinge, so I think they replace the wires and maybe make a new connection somewhere on the dock.
Surprising how much wasted space there seems to be in the dock -- it's nowhere near as tightly packaged as the tablet itself. Looks like Asus can optimize the size or fit some more features in future versions, if they want...
Let me see if I am thinking correctly...Your saying using something like mifi installed via USB wires (will it be always on?) then connect via WiFi on your transformer? So basically your putting the mifi in a case that can never be opened without a screwdriver? I guess one would always have access for your other devices as well as long as the TF is in the vicinity.
P.S. I think I think this is a good idea, not decided though. I like to think of it in a real world application.
there is another post with a guy putting in an SSD, but it bulges at the keyboard. A 32g SD card would be nice.
Sent from my Transformer TF101 using XDA Premium App
typci said:
I talked to the Asus service rep about it. They currently won't give you a new one since they have a hardware upgrade to fix it. If you wanted a new one you needed to do before they solved the problem. I'm waiting on the upgrade part to be delivered for for mine. Should in a few days.
A switch should theoretically work. The guy at the service center said the replace something that goes into the hinge of the dock. Looking at the teardown pics, you can see a wire goes into each side of the hinge, so I think they replace the wires and maybe make a new connection somewhere on the dock.
Click to expand...
Click to collapse
You are getting the replacement part? bought mine on the US, but live in chile... would really like to somehow get the part that needs to be replaced and do it myself
tanguita said:
You are getting the replacement part? bought mine on the US, but live in chile... would really like to somehow get the part that needs to be replaced and do it myself
Click to expand...
Click to collapse
There's very little chance they'll give anybody the part, and nothing in the previous person's post suggested they're doing so for him.
Talk to Asus Chile and get it serviced by them:
http://www.asuschile.cl/
http://latin.asus.com/Static_WebPage/Service_center_chile/
knoxploration said:
There's very little chance they'll give anybody the part, and nothing in the previous person's post suggested they're doing so for him.
Talk to Asus Chile and get it serviced by them:
http://www.asuschile.cl/
http://latin.asus.com/Static_WebPage/Service_center_chile/
Click to expand...
Click to collapse
Well I ended up calling them. I would have to ship the dock to "someone" in the US, have them ship it to the repair center, fix it, ship it back and then ask that "someone" to ship it back to me... sooo, I'm basically screwed... I ended up with a nice 150US paperweight (not even considering the horrible light bleed on the transformer).
tanguita said:
Well I ended up calling them. I would have to ship the dock to "someone" in the US, have them ship it to the repair center, fix it, ship it back and then ask that "someone" to ship it back to me... sooo, I'm basically screwed... I ended up with a nice 150US paperweight (not even considering the horrible light bleed on the transformer).
Click to expand...
Click to collapse
Yeah, actually, I hadn't realized that but it does say it clearly on the product warranty page:
"Brazil and South American countries don’t support global service"
http://support.asus.com/warranty.aspx?SLanguage=en&p=20&s=16&m=Eee Pad Transformer TF101
took mine apart also and there is quite a bit of room.
i plan on putting a 128gb usb flash drive inside the dock and soldering onto the usb connections once i get all the bits in.
Any bigger pictures? Are the screws under the rubber feet?
just two screws under the rubber feet near the hinge then it just pulls apart from the top
had to take mine apart as the spring/clip mechanism for the sd card wouldnt lock the card in.
now the card is stuck in with no nails haha a simple fix.
This is good news. I hacked a Crystal HD decoder card (pcie), USB wifi dongle, a logitech nano receiver, and a 4 port micro usb hub (from a touch screen setup) into a Dell mini 9 and there was absolutely no room compared to this.
They even have covers for the USB ports, so if you remove a header and solder wires up you just have to hot glue / epoxy that cover from the back and you are money. Looks clean and stock.
I have an old 64 GB thumbdrive that might find a new home. Maybe a 1.8" usb HDD would fit in there with the battery, without the battery who knows.
For those who are looking for the Motorola Rapid Charger locally, I ran into a guy at Best Buy who was the regional manager for the mobile department. He too has a Note. I explained the issues I'm having and what we all came up with as a resolution. Funny his he already had that Motorola Rapid charger.
Anyways, he pointed out the car dock kit
For the Droid X and X2. It comes with the very same charger we all are looking for. Here's the bonus: it was originally 49.99 but on clearance for 24.99. Not as good as ebay for 7.59 but I figured I had a 50 gift card after I took all those other chargers and cables back. So I bought the kit!
Here's the REAL bonus: not only does it have all the stuff for a car dock (although its for a Droid), but when.I got to the register, it rang up for 9.99!
I bought all 3 they had in stock.... ;-)
Check your local BB for availability if you don't want to wait for it to ship from ebay or amazon.
Sadly though, I'm still not charging while in use... :-(
Sent from my SAMSUNG-SGH-I717 using XDA App
What issue were you having with the note? And do you mind posting a picture or link to the rapid charger you bought? I tried searching for it on Google but came up with a few different style chargers and am unsure which one your talking about. Thanks!
Can you provide a link, SKU, UPC, something we can search or reference?
Sounds like quite a deal
Thanks.
Here's a link to it on amazon. I couldnt find it on best buy. Im sure you'll need to locate it in the store.
http://www.amazon.com/gp/aw/d/B003XFG2V0
thinguy said:
Can you provide a link, SKU, UPC, something we can search or reference?
Sounds like quite a deal
Thanks.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
Here's the charger in question. It comes with the car dock kit.
http://www.google.com/m/products/ca...ei=_1VNT5PpGYrtOd3YlZoC&ved=0CEkQ8wIwBA#prd:o
itsjdmyo said:
What issue were you having with the note? And do you mind posting a picture or link to the rapid charger you bought? I tried searching for it on Google but came up with a few different style chargers and am unsure which one your talking about. Thanks!
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
I purchased the Kensington dual port charger for iPad/iPhone from CompUsa. It has 2.1 amp and 1.0 amp ports. I used it in my 2008 Honda Civic Si and my car electrical started acting possessed. My power doors were locking/unlocking; alarm system wouldn't always work; drained battery needing me to jump start. Had left charger in lighter port w/o anything attached. Don't know if it was defective but car has returned to normal after I got rid of it might try another
¢ via SGH-i717
Imo just modify a USB cable as another post outlined.. Short the middle two data pins or splice the cable and short them then use a regular car charger with a USB port and the modified cable. Works for me
Sent from my SAMSUNG-SGH-I717 using xda premium
th3g1z said:
Imo just modify a USB cable as another post outlined.. Short the middle two data pins or splice the cable and short them then use a regular car charger with a USB port and the modified cable. Works for me
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
+100
Take a look here,
http://forum.xda-developers.com/showthread.php?t=1671083
So you are just using the cable for charging? The dock does not fit right?
jaymz77 said:
So you are just using the cable for charging? The dock does not fit right?
Click to expand...
Click to collapse
You are correct. Just the cable.
Sent from my SAMSUNG-SGH-I717 using XDA
I ordered it a couple of days off of Amazon for $60. Flipped the ports and shaved down the plastic pieces to make it fit and it works like a charm for both my wife's stock ICS and my rooted custom ICS ROM (Eclipse 1.1). I know some folks like the old webtop interface better but the interface is so smooth now. And plus, it has one thing that other tablets don't have: touch typing without an additional peripheral which was important to me. It is also definitely better with a bluetooth mouse but the trackpad is passable.
If you have a lapdock, where did you find extension cables for the ports in case I didn't want to shove it into the back? The best I can find right now for a set of female to male micro HDMI and USB cables is almost $30 including shipping (that's half the cost of the dock).
Also, what are some of your favorite apps in webtop mode? Been digging QuickOffice and the stock Google apps.
thelance said:
I ordered it a couple of days off of Amazon for $60. Flipped the ports and shaved down the plastic pieces to make it fit and it works like a charm for both my wife's stock ICS and my rooted custom ICS ROM (Eclipse 1.1). I know some folks like the old webtop interface better but the interface is so smooth now. And plus, it has one thing that other tablets don't have: touch typing without an additional peripheral which was important to me. It is also definitely better with a bluetooth mouse but the trackpad is passable.
If you have a lapdock, where did you find extension cables for the ports in case I didn't want to shove it into the back? The best I can find right now for a set of female to male micro HDMI and USB cables is almost $30 including shipping (that's half the cost of the dock).
Also, what are some of your favorite apps in webtop mode? Been digging QuickOffice and the stock Google apps.
Click to expand...
Click to collapse
Just picked this lapdock up today at radio shack for $19.97. Also wondering the best local spot to get extension cables just to have them
Sent from my DROID RAZR using xda premium
$20? Wow! You'd be paying more for the cables then.
Sent from my DROID RAZR using xda app-developers app
Thats a really low price.. I just check my local radioshack and even on the website and i couldnt find it. Can you please post a link or something. Thank you.
Hindle1225 said:
Just picked this lapdock up today at radio shack for $19.97. Also wondering the best local spot to get extension cables just to have them
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Not much of a link to post. I read this thread yesterday. http://forum.xda-developers.com/showthread.php?t=1343268
I called my local radio shack and they had one. The guy working there couldn't believe it was marked that low on clearance. I hurried up there before they could tell me "it was sold". Have them look up that part number because they didn't think they had one til they searched. I think you can have then search other stores nearby also.
Sent from my DROID RAZR using xda premium
Thanks for the info. I just picked one up. I checked within 25 miles but all out of stock. I wanted to get some and give them to people here if they paid shipping.
Hindle1225 said:
Not much of a link to post. I read this thread yesterday. http://forum.xda-developers.com/showthread.php?t=1343268
I called my local radio shack and they had one. The guy working there couldn't believe it was marked that low on clearance. I hurried up there before they could tell me "it was sold". Have them look up that part number because they didn't think they had one til they searched. I think you can have then search other stores nearby also.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
At first i thought this thing was gimmicky. After using it for a week i can say this thing is great. With the logitech wireless mouse this acts just like a laptop. Scrolling with mouse, copy and paste like windows. Alt/tab shortcut to pull up other programs. I could mention more but... Basically i don't even turn my laptops on now.
Sent from my DROID RAZR using xda premium
Hindle1225 said:
At first i thought this thing was gimmicky. After using it for a week i can say this thing is great. With the logitech wireless mouse this acts just like a laptop. Scrolling with mouse, copy and paste like windows. Alt/tab shortcut to pull up other programs. I could mention more but... Basically i don't even turn my laptops on now.
Click to expand...
Click to collapse
I'm not there yet but I do use it more frequently than I thought I would. The keyboard takes a bit getting used to and the mouse is huge, too.
After a few days with it too all i can say is that i love it. My Toshiba Qosmio X775-Q7272 gaming laptop is a monster of a thing to be handling so when i found out about the $20 deal i thought i would give it a shot. Its pretty sweet. Charges
he phone while using it (not that i have to worry about charge with Razr Maxx). Wireless mouse works perfectly and keyboard has no delay at all.
2 things i dont like: 1 The area to the right of where you plug your phone in gets really hot. Even after 10 minutes of use. I'm sure that will shorten the life of cables and conections in that area.
2.I cant get my maxx to sit well enough in the plug so it keeps disconnecting here and there. Seen as the maxx has to be standing up i didnt really expect it to work. So i'll keep am eye open for a good deal on small extension cables for it so it can be chilling on the table. Or i'll keep trying to think of a way to mount the phone on the dock.
Hindle1225 said:
At first i thought this thing was gimmicky. After using it for a week i can say this thing is great. With the logitech wireless mouse this acts just like a laptop. Scrolling with mouse, copy and paste like windows. Alt/tab shortcut to pull up other programs. I could mention more but... Basically i don't even turn my laptops on now.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
greeky510 said:
2.I cant get my maxx to sit well enough in the plug so it keeps disconnecting here and there. Seen as the maxx has to be standing up i didnt really expect it to work. So i'll keep am eye open for a good deal on small extension cables for it so it can be chilling on the table. Or i'll keep trying to think of a way to mount the phone on the dock.
Click to expand...
Click to collapse
Ive got it sitting in there well and dont get disconnects. I trimmed some plastic off the edge and it fits in snug.
Sent from my DROID RAZR using xda premium
Anybody interested in buying an Atrix lapdock that has been reconfigured for RAZR?
Hi everyone, I'm not sure if this is allowed on the forum. I was selling my Atrix lapdock that I was using for RAZR MAXX on eBay, and got into a big mess with buyer and eBay (long story). Anyway, I don't trust eBay anymore so I'm looking to see if anybody is interested in buying it on XDA. If so, please PM me. I have a solid past eBay history and am willing to explain and arrange for a lower price than what was sold on eBay. Thanks in advance!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230830411769
imdaShiy said:
Hi everyone, I'm not sure if this is allowed on the forum. I was selling my Atrix lapdock that I was using for RAZR MAXX on eBay, and got into a big mess with buyer and eBay (long story). Anyway, I don't trust eBay anymore so I'm looking to see if anybody is interested in buying it on XDA. If so, please PM me. I have a solid past eBay history and am willing to explain and arrange for a lower price than what was sold on eBay. Thanks in advance!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230830411769
Click to expand...
Click to collapse
Here's where you want to try and sell this.
http://forum.xda-developers.com/forumdisplay.php?f=476
Sent from my DROID RAZR using xda premium
Hey there xda'ers!
I just picked up a Titan 4G for $30 :laugh: I always wanted one, I'm using an S3 right now and I plan on switching back and forth at my leisure.
The problem with the Titan is the charger port is VERY finicky. You have to really push the micro USB in and get it in just right for it to charge.
I found replacement ones on eBay for around $7ish. Has anyone replaced one before? Do you guys have any tips?
Thanks to all in advance!
Anyone?
Sent from my SGH-T999 using XDA Premium App
magiconthetire said:
Anyone?
Sent from my SGH-T999 using XDA Premium App
Click to expand...
Click to collapse
have you checked there's no fluff in the original one? mine sometimes looks like it's charging, (ie light comes on red), but never gets charged. this usually means there's fluff inside the usb port and a good hard blow, (pardon the expression), sorts it out...
Sihaz said:
have you checked there's no fluff in the original one? mine sometimes looks like it's charging, (ie light comes on red), but never gets charged. this usually means there's fluff inside the usb port and a good hard blow, (pardon the expression), sorts it out...
Click to expand...
Click to collapse
Sadly, the previous owner must have forced a mini usb into the jack or something, since all the pins are bent in. Or, it may have been dropped on the charger port while plugged in. All in all, the phone is in great shape for what I paid for it, as I always had a fascination with WP7.
I got a quote for $60-$70 to have the new USB port installed since it has to be soldered.
Even still, I plan on keeping it and ordering a back up battery charger from eBay since the phone is easily a 8/10 condition wise and I have already unlocked it :good:
Hi Guys,
I'm looking for a car dock for my Nexus 6 similar to the pro clip or this fix2car mount http://www.holdersandmounts.co.uk/f...on-mount-dash-mount-with-usb-car-charger.html[1]
Basically my criteria are that I want to be able to take the phone in and out of the mount without having to attach the USB cable after. I want the USB cable to be fixed and the phone simply slides in to it.
The pro clip would cost me 150$+ and the fix2car one I linked would run me close to 70$. I'm looking for something about half that price.
Hope you guys can help!
Thanks
0 replies on XDA and on reddit, something tells me i'm about to drop a hundred bucks on a car mount... AGAIN!
PSA to anyone thinking about it: DO NOT get the airdock 2, it's a piece of poop and the phone falls off constantly.
If you must have the fixed plug, you could hack one in place with some JB Weld. A lot of guys did just that back in the "old" days.
Or suguru, that stuff works great for something like this. BTW, my airdock works great.
Sent from my Nexus 10 using Tapatalk
If you would like to charge your phone in a car dock without having to attach USB each time why don't you get the QI charging dock? It is about $35-$40 here in US, probably about same in UK. And will work with non-bulky case.
EugeneR said:
If you would like to charge your phone in a car dock without having to attach USB each time why don't you get the QI charging dock? It is about $35-$40 here in US, probably about same in UK. And will work with non-bulky case.
Click to expand...
Click to collapse
welllllllll the reason why im trying to avoid a QI charging dock (which btw is not a make or model but the technology, can you specify which model you're referring to?) is because i bought this neato quick charge usb lighter thingy and i'd like to be able to use quick charge..... wireless QI charging is pretty slow and when having the screen on, and steaming music, and using maps for nav, it doesn't actually gain any charge!
three west said:
Or suguru, that stuff works great for something like this. BTW, my airdock works great.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
sugru is 22 american. add shipping, conversion to canadian dollar, and duties and it comes out to a lot thanks for the suggestion, though.
i think i am going with this:
http://www.lightinthebox.com/imobi4...ger-for-motorola-google-nexus-6_p2642248.html
georgeism said:
i think i am going with this:
http://www.lightinthebox.com/imobi4...ger-for-motorola-google-nexus-6_p2642248.html
Click to expand...
Click to collapse
Nice find! I didn't know anyone made one like that for our Nexus 6.
georgeism said:
welllllllll the reason why im trying to avoid a QI charging dock (which btw is not a make or model but the technology, can you specify which model you're referring to?) is because i bought this neato quick charge usb lighter thingy and i'd like to be able to use quick charge..... wireless QI charging is pretty slow and when having the screen on, and steaming music, and using maps for nav, it doesn't actually gain any charge!
Click to expand...
Click to collapse
Well, I am doing the same, streaming and navigating, with Nexus 6 in the dock, using 2.1A USB lighter thingy and it charges.
I am also aware QI is a technology and not a model. There are quite few of those. I am using this one: http://www.amazon.com/gp/product/B00N4H1R1M?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01
EugeneR said:
Well, I am doing the same, streaming and navigating, with Nexus 6 in the dock, using 2.1A USB lighter thingy and it charges.
I am also aware QI is a technology and not a model. There are quite few of those. I am using this one: http://www.amazon.com/gp/product/B00N4H1R1M?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01
Click to expand...
Click to collapse
the problem is that QI will bottleneck your charging. using a quickcharge usb lighter thing will work via a cable but not through QI!
QI will support up to 15 watts of charging in the future, it was actually announced like a couple of weeks ago or something, so future models will support quick charging
I have quick charger at work and at home. In the car I need the dock I can use with minimum effort and without connecting/disconnecting USB frequently
georgeism said:
i think i am going with this:
http://www.lightinthebox.com/imobi4...ger-for-motorola-google-nexus-6_p2642248.html
Click to expand...
Click to collapse
Curious to know if you got the holder yet?
From the pictures on the site, it appears that one of the claws on the top lands directly on the power and/or volume buttons.
Would like to know if it interferes with proper operation?
uicnren said:
Curious to know if you got the holder yet?
From the pictures on the site, it appears that one of the claws on the top lands directly on the power and/or volume buttons.
Would like to know if it interferes with proper operation?
Click to expand...
Click to collapse
it can if you have it completely tightened down, but you would not be able to pull the phone in and out if it was tightened down. the way i have it now is the clamp holds on to the lip of the phone but not so tightly that I can't easily put the phone in and out of the dock. The clamp does not press on the buttons, this way.