[Q] Recovery Mode commands not working - Micromax A116

Hi,
I got the Mobistel Cynus T5, which is identical to Micromax Canvas A116 HD.
I startet the Phone into bootloader mode by pressing volume + and + and the power button for several seconds at the same time.
Then there is a menu which lets you choose between recovery mode (volume +) and factory mode (volume -).
I pressed the volume + button and got into recovery mode. But in the middle of the screen there was a dead android figure and a warning signal. I couldn't execute any of the commands. I always got the Message "no command". I even couldn't execute the reboot command.
Then I startet the phone again by taking off the battery and this time I have chosen the factory mode. And again I couldn't execute any of the commands from the factory mode menue. Nothing happend.
I tried everything with and without administrator status and with and without usb debugging mode.
But the phone is not rooted.
Can anyone tell me if this is normal or if my phone is broken? What do I have to do make the command "backup user data" from the recovery mode working, for example.
Thanks for your answewrs.

treggi said:
Hi,
I got the Mobistel Cynus T5, which is identical to Micromax Canvas A116 HD.
I startet the Phone into bootloader mode by pressing volume + and + and the power button for several seconds at the same time.
Then there is a menu which lets you choose between recovery mode (volume +) and factory mode (volume -).
I pressed the volume + button and got into recovery mode. But in the middle of the screen there was a dead android figure and a warning signal. I couldn't execute any of the commands. I always got the Message "no command". I even couldn't execute the reboot command.
Then I startet the phone again by taking off the battery and this time I have chosen the factory mode. And again I couldn't execute any of the commands from the factory mode menue. Nothing happend.
I tried everything with and without administrator status and with and without usb debugging mode.
But the phone is not rooted.
Can anyone tell me if this is normal or if my phone is broken? What do I have to do make the command "backup user data" from the recovery mode working, for example.
Thanks for your answewrs.
Click to expand...
Click to collapse
Are you using stock ROM? Did you re-flash the CWM recovery?

sskullcrusherr said:
Are you using stock ROM? Did you re-flash the CWM recovery?
Click to expand...
Click to collapse
"I'm facing same problem at Micromax A106 unit 2 & i flashed CWm recovery pls help."

On most of the phones, stock android recovery is the same way as you told. Search the forums and try flashing philz recovery (recommended). This should help.

PraneethMv said:
On most of the phones, stock android recovery is the same way as you told. Search the forums and try flashing philz recovery (recommended). This should help.
Click to expand...
Click to collapse
will u pls help me

A.R. Rangon said:
will u pls help me
Click to expand...
Click to collapse
I dont have the device A106 Unite 2 and im not familiar with the device. All i know is download the philz recovery from this link, use SP Flash Tool or MobileUncle Tools to flash the recovery ( mobile uncle tools needs a rooted device, it flashes directly from phone). See this thread for more information. Read everything before flashing!
http://forum.xda-developers.com/unite-2/general/philz-touch-v6-57-9-cwm-advanced-t2954150
NOTE: This is only for KITKAT.
Hit the Thanks button if ive helped you.
For any further questions, see the micromax unite 2 thread. This thread is for Canvas HD. Thanks

But i need lollipop version

Related

[Q]how to enter into recovery mode & bootloader in micromax a27 bolt? key combinatn

[Q]how to enter into recovery mode & bootloader in micromax a27 bolt? key combinatn
hiii
i press volume+ andd power button
but cannot enter into cwm recovery
which enter into factory test,pcba test etc.............which mode is this???
mobinmk007 said:
hiii
i press volume+ andd power button
but cannot enter into cwm recovery
which enter into factory test,pcba test etc.............which mode is this???
Click to expand...
Click to collapse
Do you have CWM actually installed?If not flash it via ADB below;
http://forum.xda-developers.com/showthread.php?t=2191285
Are you pressing the buttons to boot the device or after you have already booted the device?
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key together to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
no sucesss.. key combination not working. pls help mee
ken.okech.94 said:
Do you have CWM actually installed?If not flash it via ADB below;
http://forum.xda-developers.com/showthread.php?t=2191285
Are you pressing the buttons to boot the device or after you have already booted the device?
-- Remove battery of your phone and reinsert.
-- Press Power and Volume Up key together to boot into recovery mode.
-- You should see CWM now, otherwise try flashing again
Click to expand...
Click to collapse
i installed cwm and it flash again..
bt no sucess , then i erase recovery and flash it again
bt no sucesss
switch off my fon
remove battery
reinsert into it
press volume+ key && power button together
no success it goes to factory tes mode ,pcba test etc
cnt enter cwm
bt i can enter cwm by rom manager or mobile uncle quick boot
cant enter cwm by hard keys
pls help mee
mobinmk007 said:
i installed cwm and it flash again..
bt no sucess , then i erase recovery and flash it again
bt no sucesss
switch off my fon
remove battery
reinsert into it
press volume+ key && power button together
no success it goes to factory tes mode ,pcba test etc
cnt enter cwm
bt i can enter cwm by rom manager or mobile uncle quick boot
cant enter cwm by hard keys
pls help mee
Click to expand...
Click to collapse
You are the guy who developed the custom ROM for A27 Bolt, right? How did you take the nandroid backup before flashing the new ROM? I have been meaning to ask you this.
If you have taken the backup using CWM recovery, then which process did you follow for flashing the recovery? Is it the one mentioned in this forum for A27 Ninja?
pterodactyl666 said:
You are the guy who developed the custom ROM for A27 Bolt, right? How did you take the nandroid backup before flashing the new ROM? I have been meaning to ask you this.
If you have taken the backup using CWM recovery, then which process did you follow for flashing the recovery? Is it the one mentioned in this forum for A27 Ninja?
Click to expand...
Click to collapse
You cant enter cwm recovery by hard keys
you can enter cwm.by
installing the app QUICK BOOT from play store
or mobile uncle tools
and take back up
&&& flash custom rom
mobinmk007 said:
You cant enter cwm recovery by hard keys
you can enter cwm.by
installing the app QUICK BOOT from play store
or mobile uncle tools
and take back up
&&& flash custom rom
Click to expand...
Click to collapse
That defeats the purpose of the CWM recovery, as we need to be able to get into recovery when the phone is BRICKED, so I looked around for this kind of problems. I was using the ROM Toolbox Lite for rebooting into recovery. I am currently using the the following through ADB to boot into recovery when the phone is turned off, so it will also work on brick:
Code:
adb reboot recovery
As far as I understand, if I can extract init.rc ouf of boot.img, (init.rc opens with notepad) find “service flash_recovery /system/etc/install-recovery.sh” and comment it (put # before the line and the next lines in this paragraph or the next command), and then save init.rc and rebuild the boot image then flash the boot.img back, then we will be able to get CWM by pressing the power + volume up button.
The problem I am facing with this are 2:
There is a separate init.rc in my "System" directory, and it contains the line. Should I change this one or extract the init.rc out of the boot.img?
How to extract init.rc out of boot.img and after editing rebuild the boot.img?
solution
pterodactyl666 said:
That defeats the purpose of the CWM recovery, as we need to be able to get into recovery when the phone is BRICKED, so I looked around for this kind of problems. I was using the ROM Toolbox Lite for rebooting into recovery. I am currently using the the following through ADB to boot into recovery when the phone is turned off, so it will also work on brick:
Code:
adb reboot recovery
As far as I understand, if I can extract init.rc ouf of boot.img, (init.rc opens with notepad) find “service flash_recovery /system/etc/install-recovery.sh” and comment it (put # before the line and the next lines in this paragraph or the next command), and then save init.rc and rebuild the boot image then flash the boot.img back, then we will be able to get CWM by pressing the power + volume up button.
The problem I am facing with this are 2:
There is a separate init.rc in my "System" directory, and it contains the line. Should I change this one or extract the init.rc out of the boot.img?
How to extract init.rc out of boot.img and after editing rebuild the boot.img?
Click to expand...
Click to collapse
u shud edit init.rc from boot.img i think... u can unpack/pack boot.img using racer tool.... search in google for racer kitchen... u will get it.. reply me if u get success....
saginesht said:
u shud edit init.rc from boot.img i think... u can unpack/pack boot.img using racer tool.... search in google for racer kitchen... u will get it.. reply me if u get success....
Click to expand...
Click to collapse
Will try that and let you know what happens.
pterodactyl666 said:
That defeats the purpose of the CWM recovery, as we need to be able to get into recovery when the phone is BRICKED, so I looked around for this kind of problems. I was using the ROM Toolbox Lite for rebooting into recovery. I am currently using the the following through ADB to boot into recovery when the phone is turned off, so it will also work on brick:
Code:
adb reboot recovery
As far as I understand, if I can extract init.rc ouf of boot.img, (init.rc opens with notepad) find “service flash_recovery /system/etc/install-recovery.sh” and comment it (put # before the line and the next lines in this paragraph or the next command), and then save init.rc and rebuild the boot image then flash the boot.img back, then we will be able to get CWM by pressing the power + volume up button.
The problem I am facing with this are 2:
There is a separate init.rc in my "System" directory, and it contains the line. Should I change this one or extract the init.rc out of the boot.img?
How to extract init.rc out of boot.img and after editing rebuild the boot.img?
Click to expand...
Click to collapse
If ur phone is turned off
U cant access adb
In bootloop
Also
Nly fastboot mode will rescue
hlp me plzzzz!!!!!!
I have a micromax a27 and i rooted it and tried to install dreamboltx v2 by mayank choudhary well while installing the rom i got my device in a condition where i can just access fastboot mode and when i try to turn it on it just shows a black screen and keeps vibrating plz suggest any way to go to recovery mode and rest will do by myself plz hlp thanx in advance.
same here
having the same problem
rananjay said:
having the same problem
Click to expand...
Click to collapse
having same problem with mmx a27 so u guys find the solution ? plz help .... (only vibration problem after flashing dreambolt rom )
If Micromax Bolt versions have same h/w configuration, switch off the phone, then press and hold VOLUME DOWN(-) button, and while press-holding it, press POWER button, keep holding both buttons. An 'exclamatory sign inside a triangle with a phone icon' should appear on the screen after 10-20 seconds. This is the recovery mode. Tested in Micromax Bolt A26. Connect the phone via USB cable to PC. Open ADB tool on command prompt, and type 'adb devices', it should list your phone with an ID and as 'Recovery' mode. This is the only way I found to interact with the Micromax Bolt phone, since I couldn't find any hard reset key combinations to show up the ClockWorkMod Recovery options on screen. Remember, incase if your phone is soft-bricked/bootloop stuck, and it is non-rooted and USB-Debugging disabled, chances to recover the phone OS and it's data is less, expect to FLASH it with a new compatible stock/custom ROM using Spreadtrum Tool and necessary PAC file using an Auto-Ignition Cable (This can be done without need for Flashing Box). If the phone is rooted/USB-Debugging enabled when it was bricked, then it can fixed just by using ADB tool to wipe cache/user data or any other ops, without necessity for flashing ROM.

[Q] Huawei Ascend G700 stuck at bootloop

Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery

Help getting recovey back

Hello all, I need some help with my new phone
Phone is an AT&T Optimus G E970
Phone was rooted and unlocked by myself... everything was ok!
After testing some roms, i have now lost the ability to enter recovery mode. After I press up + power button it will go into fastboot, but when y press down twice it will show the android logo with the chest open and a red triangle above... the weird thing is that the phone boots up fine with the last rom I flashed (wifi not working though).
Tried root checker and it said i am rooted. try to enter recovery from rom manager and it does nothing... would appreciate any help i can get from you guys
Bump
Sorry, but i am desperate to have this phone working at its full potential...
Try flashing recovery IMG file using flashify.
It sounds like you're using an older bootloader, which does not display the options.
Vol Up + Power enters Bootloader, not recovery. When you get to the screen with the android, press Vol Down Twice and then Power. This should get you in to Recovery.
n1mr0d said:
Try flashing recovery IMG file using flashify.
Click to expand...
Click to collapse
I downloaded but it says that the phone is not rooted... when i run root check it says "you are rooted!"... OMG!
OMGMatrix said:
It sounds like you're using an older bootloader, which does not display the options.
Vol Up + Power enters Bootloader, not recovery. When you get to the screen with the android, press Vol Down Twice and then Power. This should get you in to Recovery.
Click to expand...
Click to collapse
That is what i tried doing... please look at the pics i attached... I can get to the bootloader at least. I also tried to re-root but i will need to change from "Charge Only" to "MTP" and the rom that's on the phone now ([ROM][KOT49H] AOSP-GEEB 4.4.2_r1 [Dec-13]) does not have that option. What i want to do at this point is flash the recovery by any means possible so that i can install a stock JB at least. OR some other way of rooting which i think will fix the What would you recommend?
I rly appreciate you looking into this for me

[Q] sky im a830k wont start at all

hi there
i have sky vega racer 2 im a830k, i had root acces, can also flash rom using TWRP.
twrp run from fastboot mode, to enter the recovery and than flashd the rom im "a830k with sms fix version" developed by some vietname or choi(i dont remember, the problem is when i hit the "reboot" button in recovery after flashing, the mobile went off, and now it wont start at all, neither in download mode (volume+, volume- & pwer) , nor in recovery mode by pressing ( volume+ & power) buttons, also the charging icon wont dis[lay while i try to charge....
is there anyone who could guide me through this problem..!!!!
its a great phone people dont know off by the way.!!!1

Stuck Up .. Screwed!! Plzz Help.....

Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...

Categories

Resources