Hi, Sorry to post here, but there isn't a section for the 8.9 tabs. That I found.
Ive been trolling all night and morning here and other sites trying to find a solution to my problem, and apparently from what I've seen, no one seems to get an answer to this question or the same for the 10.1 tab
I have The Galaxy Tab 8.9 SGH i957D (Telus) LTE 4G.
Using both Odin 3.7 and 1.83 I have tried to root using SGH-rooted-kernel-V2 from a couple of sources and all I get on reboot is the 2 splash screens, then it just sits on a black screen with the backlight on.
After a few attempts with either version of Odin, I tried CWM recovery, this flashed successfully also, and I can get into CWM recovery and Download mode, but still cannot get past the splash screens.
I have tried the stock ROMs a couple of times and different custom images (DaGrootkernel, DaGOCkernel), but still can't get past the splash screens. My battery drained over night, and I have it charging now in download mode, as otherwise it just loops continuously buzzing and lighting up, but still the same issue, I can't even turn it off as it just reboots as soon as I try.
From what I've seen on here, there are a few of us that need a solution to basically the same issue.
Please... Could one of the gurus on here give some advice as to what us noobs need to do with our semi bricked tabs?
Thanks.
http://forum.xda-developers.com/showthread.php?t=1295671. Its right below the 10.1 forum...
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
http://forum.xda-developers.com/showthread.php?t=1295671. Its right below the 10.1 forum...
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Thanks, I'll have a look there. Just flashed successfully with Odin 3.7 and openrecovery-twrp-2.3.1.1-sgh-i957.tar. open recovery work great, but still no boot past the splash screens.
the file you used is only for changing your recovery leaving your android os wonky. find a original stock rom for your tablet and flash that with odin...that will bring all back to stock. then you can reflash the custom recovery and then install custom roms if you want
simple way of understanding android is to think of it as a pc
recovery = bios
stock or custom rom = windows..linux..etc...
hope this helps
alexmoi said:
the file you used is only for changing your recovery leaving your android os wonky. find a original stock rom for your tablet and flash that with odin...that will bring all back to stock. then you can reflash the custom recovery and then install custom roms if you want
simple way of understanding android is to think of it as a pc
recovery = bios
stock or custom rom = windows..linux..etc...
hope this helps
Click to expand...
Click to collapse
Thanks a lot, that actually cleared things up a bit. Can I read the recovery off my wife's identical tablet and use that? Can that be done with Odin, or what would I need to read that?
Thanks.
Sent from my SGH-I897 using xda app-developers app
FIXED!
A HUGE THANKS to alexmoi.
You my friend, are a lifesaver. Thanks a lot. Hope I can return the favor one day.
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
very glade to help if i can....just keep in mind that as long as you can go into download your android is not bricked....i was scared my first time...but now when i dont do something right i just get mad to have to redo so much work lol....
have a nice day
Related
Hi guys, just new to these forums. I was forced to sign up due to my problems. just about 2 days ago i flashed these to my Galaxy Note Korean unit (SHV-E160S):
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09.zip
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09recovery.tar
i used Odin to flash the recovery file then booted into recovery mode to flash the kernel.. im sure i did right because i was able to use superuser and change my boot animation. unfortunately i found another update to the .tar and .zip file. i'm pretty sure its for my phone too so i went ahead and did the same thing. i kinda made a mistake in the process, i think i wiped the cache and all. dunno if i wiped partition but in the end i am only able to go to recovery & download mode. the Note will power up but won't get past the "Galaxy Note" screen. after that i will just be black. it's weird because it can still connect to Odin on my laptop although the screen is still black. is it a soft-brick? right now i'm trying to download an ICS stock rom and will try flashing it with Odin. i someone can help me please do. sorry by the way if this is a Korean Galaxy Note. this is the best category i could post since the AT&T and the SHV-E160S are the same in specs and all. hope someone could help me and spare me the pain from sending my unit for repair!
Sounds like a soft brick.. it seems you flashed perhaps the wrong file the last time otherwise it would be working like the last flash? ..I don't use odin often but I would restore my backup or just start over and use the last files to flash until you find something different
yeah i tried the others. i am able to flash the 1st recovery.tar but i cant seem to copy the .zip kernel because i dont have access to usb
about to flash stock ICS using Odin, hope this works! i just have one file which is a .tar file, hope this is the right file and don't brick!
OMG, i just pissed my pants *kidding*, the flashing of the stock ROM worked! and not onl that, i'm on ICS! all thanks to xda=developers forum for giving me the idea to flash a stock ROM! thanks guys! i'll never root my phone again i'd rather stay safe. thanks for the reply friend! ICS rocks!
Could you give me stock ics rom for e160s? thanks
chelsea123 said:
Could you give me stock ics rom for e160s? thanks
Click to expand...
Click to collapse
WRONG FORUM
plz search next time
at least
or use google
SMDH
Ok people i have faith in you that you can help me out i am in a bind and i would really appreciate your help.
First of all i am kind of a noobie at this. Maybe im just stupid or my hours and hours of reshearch in this site hasnt payed of quite yet.
So i would really appreciate your help, here is my problem:
A few days ago i tryed loading a new kernel through odin, at first it couldnt find my device but i later found out that it was a driver problem. after odin found my device i tryed loading the newset kernel that is for my galaxy player 5.0 i did and it said it suceeded i was very happy at the time.
My happiness didnt last long becasue within ten minutes after i new i was in trouble becasuase even when my device was plugged in it boot up to the samsung logo ans never went past it i can boot into download mode but i cannot boot into recovery mode
Another thing that i thought was wierd i could not power down my device when i held my power button the screen went black and came right back on again i could not power it off i just had to let my battery die now please tell me what i can do keep in mind that:
my device cant power down, it is stuck at the samsung logo and i can only boot into download mode
PLEASE HELP
me myself and i said:
Ok people i have faith in you that you can help me out i am in a bind and i would really appreciate your help.
First of all i am kind of a noobie at this. Maybe im just stupid or my hours and hours of reshearch in this site hasnt payed of quite yet.
So i would really appreciate your help, here is my problem:
A few days ago i tryed loading a new kernel through odin, at first it couldnt find my device but i later found out that it was a driver problem. after odin found my device i tryed loading the newset kernel that is for my galaxy player 5.0 i did and it said it suceeded i was very happy at the time.
My happiness didnt last long becasue within ten minutes after i new i was in trouble becasuase even when my device was plugged in it boot up to the samsung logo ans never went past it i can boot into download mode but i cannot boot into recovery mode
Another thing that i thought was wierd i could not power down my device when i held my power button the screen went black and came right back on again i could not power it off i just had to let my battery die now please tell me what i can do keep in mind that:
my device cant power down, it is stuck at the samsung logo and i can only boot into download mode
PLEASE HELP
Click to expand...
Click to collapse
Hello,
Can you please give us some technical aspect's towards the device you are having problems with?
For example,
is it international or an USA device?
Did you flash any custom ROM's with kernels?
Where did you find this kernal that you've flashed?
Are you on Gingerbread, Froyo, ICS, JellyBean? (Operating System)
Jisture said:
Hello,
Can you please give us some technical aspect's towards the device you are having problems with?
For example,
is it international or an USA device?
Did you flash any custom ROM's with kernels?
Where did you find this kernal that you've flashed?
Are you on Gingerbread, Froyo, ICS, JellyBean? (Operating System)
Click to expand...
Click to collapse
I beleive it is the usa version
i flashed this file(YP-G70-Kernel-r14.tar) i found it here http://forum.xda-developers.com/showpost.php?p=20750550&postcount=1
no i could not flash any rom unless i loaded this kernel (that is if i understood right what i had read on here)
I was trying to flash from gingerbread to ics but i kept getting E: failed to verify whole-file signature so i went and researched and i understood that i had to flash a new kernel first
PLEASE HELP
U have US version and you flashed kernel for international..why dont read what you flash.
Sent from my YP-G70 using xda app-developers app
This is the kernel for your USA Galaxy Player 5. If you need to use ODIN, download the .tar version.
DZonikg said:
U have US version and you flashed kernel for international..why dont read what you flash.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
please excuse me this was my first flash and i didnt think i would have to go through all this from what i knew before i attempted it wasnt meant to be this complicated
BTW thanks for pionting it out to me
SesukaShindo said:
This is the kernel for your USA Galaxy Player 5. If you need to use ODIN, download the .tar version.
Click to expand...
Click to collapse
ok i tryed this kernel now i have a new problem odin froze while doing something with the zimage file now i cant even get into download mode when i plug it in i get this on my screen: a mobile divice with dots leading to a computer in the dots there is a warning triangle (yellow with a ! inside
please help i think im in over my head
me myself and i said:
ok i tryed this kernel now i have a new problem odin froze while doing something with the zimage file now i cant even get into download mode when i plug it in i get this on my screen: a mobile divice with dots leading to a computer in the dots there is a warning triangle (yellow with a ! inside
please help i think im in over my head
Click to expand...
Click to collapse
Its a forced download mode..did you flash with in pda section??Just flash kernel again from pda section..and before you do something be shure that you know what are you doing or you could do somethnig realy bad.
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
Its a forced download mode..did you flash with in pda section??Just flash kernel again from pda section..and before you do something be shure that you know what are you doing or you could do somethnig realy bad.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
ok got it figured out now i need help thanks to you all now im running into another problem i cannot get it to flash my rom im useing this one:http://forum.xda-developers.com/showthread.php?t=1679957
this is starting to be a walk trough what should i do i cannot boot into my old os becasue that is gone (i think)
fisrt thing is first do i "apply update from sd card" or "install zip from sdcard"
i figure install when i do that i flash and here is what is says
you have flashed cm9
first boot takes some time please be patient
install from sdcard complete
when i reboot it boots to the samsung logo stays for a bit and goes into a bootloop and takes me into recovery mode again
What gives?
could it be my custom rom or what
me myself and i said:
ok got it figured out now i need help thanks to you all now im running into another problem i cannot get it to flash my rom im useing this one:http://forum.xda-developers.com/showthread.php?t=1679957
this is starting to be a walk trough what should i do i cannot boot into my old os becasue that is gone (i think)
fisrt thing is first do i "apply update from sd card" or "install zip from sdcard"
i figure install when i do that i flash and here is what is says
you have flashed cm9
first boot takes some time please be patient
install from sdcard complete
when i reboot it boots to the samsung logo stays for a bit and goes into a bootloop and takes me into recovery mode again
What gives?
could it be my custom rom or what
Click to expand...
Click to collapse
wipe everything and reflash
iurnait said:
wipe everything and reflash
Click to expand...
Click to collapse
I did I wipe cache dalilik did a factory reset ans formatted a few of the options it had listed
try flashing cm9 again after wiping everything
iurnait said:
try flashing cm9 again after wiping everything
Click to expand...
Click to collapse
can i hurt my unit if i were to format any or all of the options
No you shouldnt. To make everything clear, the USA Samsung Galaxy Player has capacitive buttons. The international samsung galaxy player has a physical home button with capacitive menu and back buttons and that is one thing you HAVE to do is read the forum to see if it is compatible with your device. I understand that you are a noobie at this. There is a certain odin that will only work on our galaxy players the last tine ive read. Only Gingerbread roms (not including cm7) will have camera support. If you dont care about the camera, try cm10 when you get your kernel fixed. Please though, read what you have to do before you flash your device.
sent from my rooted Pantech Burst running ICS using xda app-developers app
nightfire37 said:
No you shouldnt. To make everything clear, the USA Samsung Galaxy Player has capacitive buttons. The international samsung galaxy player has a physical home button with capacitive menu and back buttons and that is one thing you HAVE to do is read the forum to see if it is compatible with your device. I understand that you are a noobie at this. There is a certain odin that will only work on our galaxy players the last tine ive read. Only Gingerbread roms (not including cm7) will have camera support. If you dont care about the camera, try cm10 when you get your kernel fixed. Please though, read what you have to do before you flash your device.
sent from my rooted Pantech Burst running ICS using xda app-developers app
Click to expand...
Click to collapse
i have it all figured out i succesfully flash cm9 and in regards to the cm10 rom if i understand right there is not a stable version out is there? please tell me i would like to know ok now gapps i have flashed it and non of the apps that thee should be are there what is wrong?????????
me myself and i said:
i have it all figured out i succesfully flash cm9 and in regards to the cm10 rom if i understand right there is not a stable version out is there? please tell me i would like to know ok now gapps i have flashed it and non of the apps that thee should be are there what is wrong?????????
Click to expand...
Click to collapse
Wrong is that you dont read op of pages..CM10 is more stabile then CM9 ..you have to flash gapps that fit for player..all apps that are missed you install from market
Sent from my Nexus 7 using xda app-developers app
ok i have another problem first off im having trouble with my wifi
what you need to know:
my network is trough a proxy server
i tried to use static ip but im not sure if i have it working right i get this error "authentication of the proxy server was unsuccessful"
when i try to use the dhcp method but it just seems but stuck on "obtaining ip address"
another thing can someone post a link to a good stable cm10 rom
Cm10
http://forum.xda-developers.com/showthread.php?t=2077671
I use this
http://forum.xda-developers.com/showthread.php?t=2083052
Sent from my Nexus 7 using xda app-developers app
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
This worked for me
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
seerenr since
Devil-Dog said:
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
Click to expand...
Click to collapse
my problem is not really with rooting the phone, it is rooted i just cant flash roms. whenever i try to flash a rom it reboots and gets stuck on the vibrant screen (bricked) so i have to take it back to stock
thanks though
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
i have re-flashed recovery multiple times i wish there was another type of recovery i could install
on another note im trying to install android 4.2.2 SlimBean and 4.3.3 and i dont know what bootloader i have nor how to check it, id appreciate it if u could show me how to check wich one i have and how to up it
thanks
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
the combo i have to do for recovery is volume up and down and the power button simultaniosly
elpromo01 said:
the combo i have to do for recovery is volume up and down and the power button simultaniosly
Click to expand...
Click to collapse
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
firefly6240 said:
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
elpromo01 said:
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
Click to expand...
Click to collapse
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
elpromo01 said:
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
Click to expand...
Click to collapse
Glad you figured it out. Just so you you know, your phone says GT-I9000 because you flashed gingerbread bootloaders. They provide better button combinations to recovery and download modes, much easier than stock combos.
Sent from my SGH-T959 using Tapatalk 2
Good to know, thanks!!
Sent from my SGH-T959 using xda app-developers app
I received this verizon Galaxy Tab 10.1 as a gift and a project, but haven't been able to make any progress.
The tablet was bought from a taxi company that used it was in car entertainment. When booted, an app immediately starts up and removes the navigation bar. If you are fast enough, you can get to the settings and uninstall this app before it starts, or what I have found to be easier, just use shell commands to hit home and uninstall while the app tries to regain control.
The table is currently running 3.2, and cannot update over wifi, nothing happens.
Root was gained by an unknown method, but the SU app won't open up. I can access su through the shell however.
I have tried flashing a cwm recovery through ODIN which says is successful but if it is booted straight to the recovery it is still stock.
Flashing ROM's through ODIN appear to be successful, but just boots right back to the original rom and recovery.
Adding anything to the SD card or anywhere else accessable to the stock recovery does not work either because the SD card is reformatted to the original contents every time.
This also occurs with any apps that are installed, each one is removed when rebooted except for SU. And Rom Manager FC's when CWM is attempting to flash.
nvflash will not work either because the bootloader is locked.
I don't know much about the boot sequence for android, but I looked for any init. files that are out of the ordinary and cannot find anything.
I'm giving this tablet away when I finally figure it out, I just want to fix it. Any help would be awesome and let me know if I've left something out.
Even if no one has any specific suggestions, can someone post a PIT file for a SCH-i905? I have seen the stock firmware that can be flashed through ODIN but it does not stick on my unit.
Thanks!
Excuse my English but my original language is Spanish.
The default verizon tablet brings in recovery an option that reloads the original recovery. If units installed CWM via Odin must access the recovery option (Vol +) on 1st boot and enter the option to leave cmw (reboot) will give you the option of not recovering the recovery.
The other alternative is to flash via odin the original software look it by google "PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708"
in this case the tab stay with the factory version.
if the team does not have SIM must type top left - top right - bottom left, bottom right and then vol + to unlock.
good look
This is the post that you are needing.
http://forum.xda-developers.com/showthread.php?t=1342995
Sent from my SM-N900V using XDA Premium 4 mobile app
i had the same problem but pulling the sim and unlocking as mentioned above helped a lot then went through the whole rooting process through odin and have not had any issues with anything reverting back to stock. only issue now is not very many roms for our model "bummer" all in all still a good droid tablet for what i paid lol if you still havent got it going let me know and i will give you all the directions and steps i used
I have tried installing PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE2011070 4_0708 through Odin3.
I do boot directly into recovery after installing CWM, the stock recovery still persists. I have tried several times because I know sometimes it does not stick.
I have also tried flashing the factory image linked in that xda post "[ROM]EG01 - Factory STOCK ODIN Image - VZW LTE Tab 10.1".
Boots right back up and starts the same taxi cab show case media software it normally does.
One thing I did not note in the first post. I do have root access when the tablet is booted into the os, but I do not when the tablet is in recover. I dont know if this is unusual or not.
I can also install busy box, but have yet to find out his would be useful.
I also do not have access to nvflash, but I think this is normal because the bootloader is not unlocked.
http://forum.xda-developers.com/showthread.php?p=49924392
Might work for you too. This is a post I made in another thread.
Sent from my Nexus 4 using Tapatalk
baystallion said:
http://forum.xda-developers.com/showthread.php?p=49924392
Might work for you too. This is a post I made in another thread.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Awesome, I'll give this a go when I get home.
Was there a p4vzw twrp version some where in those links?
Looks like all of the ones referenced were 3g and wifi only.
Sidenote: I don't care if I keep 4g functionality or not, I will only be using this for wifi, if that makes fixing the problem any easier.
hsbr said:
Was there a p4vzw twrp version some where in those links?
Looks like all of the ones referenced were 3g and wifi only.
Sidenote: I don't care if I keep 4g functionality or not, I will only be using this for wifi, if that makes fixing the problem any easier.
Click to expand...
Click to collapse
Search for infamous AOKP 4.2 thread. I think it has twrp for p4vzw.
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
Search for infamous AOKP 4.2 thread. I think it has twrp for p4vzw.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
I was able to find the thread, thanks!
After downloading the odin flashable twrp, I tried first with Odin3, but it failed. Then I flashed with JOdin, this first pulled a PIT file from the tab then failed to repartition. If I ran it without repartitioning it said it was sucessful, but if I boot straight into recovery the stock android recovery still comes up.
I have a way to get a pit file now though, so that's nice.
hsbr said:
I was able to find the thread, thanks!
After downloading the odin flashable twrp, I tried first with Odin3, but it failed. Then I flashed with JOdin, this first pulled a PIT file from the tab then failed to repartition. If I ran it without repartitioning it said it was sucessful, but if I boot straight into recovery the stock android recovery still comes up.
I have a way to get a pit file now though, so that's nice.
Click to expand...
Click to collapse
Don't use the Odin way. First flash cwm recovery, then flash the twrp zip file.
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
Don't use the Odin way. First flash cwm recovery, then flash the twrp zip file.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
I can't flash CWM in the first place. I have listed all of the different methods I tried flashing CWM with in the OP.
hsbr said:
I can't flash CWM in the first place. I have listed all of the different methods I tried flashing CWM with in the OP.
Click to expand...
Click to collapse
Oh, then I can't help you then. Sorry.
Sent from my GT-P7500 using Tapatalk
hsbr said:
Even if no one has any specific suggestions, can someone post a PIT file for a SCH-i905? I have seen the stock firmware that can be flashed through ODIN but it does not stick on my unit.
Thanks!
Click to expand...
Click to collapse
Yes please i have an issue my tablet got stuck on samsung logo i tried to flash another rom because i cant fing any rom for this tablet US Callular
i905. Tab 2 10.1.
If any one can provide a stock odin or something to make this tablet work i would appreciated?
I found my old galaxy tab s t700 and tried resetting it. I had a custom rom and recovery, and now it's looping on the "teamwin" logo which flashes every few seconds. Not sure what to do as it's been years since I've flashed anything. I just want to get my tablet up and running with the latest software available for it, please help
hitecold said:
I found my old galaxy tab s t700 and tried resetting it. I had a custom rom and recovery, and now it's looping on the "teamwin" logo which flashes every few seconds. Not sure what to do as it's been years since I've flashed anything. I just want to get my tablet up and running with the latest software available for it, please help
Click to expand...
Click to collapse
Hi, if you wanna get back to the latest Stock ROM available, simply flash it using Odin3 Tool.
You should try to get the Stock ROM from somewhere else than Sammobile though, because their download speed is a pain in the a$$ haha
Fatal_Scythe said:
Hi, if you wanna get back to the latest Stock ROM available, simply flash it using Odin3 Tool.
You should try to get the Stock ROM from somewhere else than Sammobile though, because their download speed is a pain in the a$$ haha
Click to expand...
Click to collapse
Thank you, yeah I'm trying to find another download because I don't want to pay $7.99 just to download something once, and the regular member download speed is going to take forever..