Related
I tried booting various sense and aosp roms, but my phone won't boot past the flying 3d or any other boot animations. Can someone please help? I tried wiping everything. It worked at first but it doesn't now.
I think this belongs in the questions part of the thread.(Im sure a mod might move it) Other than that can you even do a Nandroid restore?
SilverSuperman said:
I think this belongs in the questions part of the thread.(Im sure a mod might move it) Other than that can you even do a Nandroid restore?
Click to expand...
Click to collapse
i tried that too. I think it has to do something with flashing a bad kernel
Ok in order for anyone to help you more could you please tell which hboot you have, also specify further about your problem. For example: does your phone just freeze at some point or does the bootscreen keep running and never gets past it or is it taking over the world or what?
---------- Post added at 12:08 AM ---------- Previous post was at 12:05 AM ----------
Im asking because there has been alot of views on this and ppl just pass it up because its in the wrong section. Dont take offense to this plz. Im sure u knew this due to you have been a member since Oct. 2009
SilverSuperman said:
Ok in order for anyone to help you more could you please tell which hboot you have, also specify further about your problem. For example: does your phone just freeze at some point or does the bootscreen keep running and never gets past it or is it taking over the world or what?
Click to expand...
Click to collapse
HB1.5
it keeps freezing at the flying 3d animatio.
I think you should re-post this in the questions and answers part of the thread and leave this one alone. Otherwise theres gonna be ppl that will "flame" you and say that we have a section for questions and answers. Technically of course it doesnt belong here anyways. Just re-post it over there too and for some reason ppl will be more willing to help you.
ok heres your fix
1-take the rom of your choice put in your sd card
2-then take boot.img out of your rom and recovery.img of your choice and place it in android-sdk/platform-tools
(rename recovery u have to recovery.img then place it in android-sdk/platform-tools)
3-if runing widows hold shift and right click then open with command prop
4-then reboot your phone into fastboot (make sure u have fastboot drivers installed)
5- then type this in command prop
fastboot flash boot boot.img
after its done type this
fastboot boot recovery.img
then it will take u into recovery then do all wipes and flash rom of your choice
and enjoy
hope this helps u
sac23 said:
ok heres your fix
1-take the rom of your choice put in your sd card
2-then take boot.img out of your rom and recovery.img of your choice and place it in android-sdk/platform-tools
(rename recovery u have to recovery.img then place it in android-sdk/platform-tools)
3-if runing widows hold shift and right click then open with command prop
4-then reboot your phone into fastboot (make sure u have fastboot drivers installed)
5- then type this in command prop
fastboot flash boot boot.img
after its done type this
fastboot boot recovery.img
then it will take u into recovery then do all wipes and flash rom of your choice
and enjoy
hope this helps u
Click to expand...
Click to collapse
You can take the boot.img piece out that is not needed. Once you power on phone holding power and volume down, choose fastboot, connect usb, and just do fastboot boot recovery.img this will give you full access and when you flash the rom, it will install kernel and all necessary files.
Sent from my PG86100 using XDA App
He provided the fix for the problem he's having right now. So his steps are correct. Now in the future he'd want to do the
Code:
fastboot boot recovery.img
To help with flashing in the future.
nolimit78 said:
He provided the fix for the problem he's having right now. So his steps are correct. Now in the future he'd want to do the
Code:
fastboot boot recovery.img
To help with flashing in the future.
Click to expand...
Click to collapse
I didn't think that was needed. What exactly does fastboot flash boot boot.img do?
Sent from my PG86100 using XDA App
There is a limitation with HTC's unlock, recovery does not have permission to write to the boot partition, this is where the kernel goes. What this means is that you can't flash a kernel through the normal recovery. Which also means that you can't flash a ROM that requires a custom kernel. There are two ways that I know of to work around this. One is to just flash the kernel(boot.img) from fastboot, the other, and easier way is to boot recovery from fastboot and just do everything from there.
Sent from my PG86100 using XDA App
is there a way around all of this besides fastboot? or anything i can do in recovery instead?
mariojp said:
is there a way around all of this besides fastboot? or anything i can do in recovery instead?
Click to expand...
Click to collapse
My 3D is not yet rooted, but you should be able to flash everything you need without a computer. You will need Flash Image GUI, which is found in the market, or can be downloaded via the XDA post. It's JoeyKrim's program.
Here's a stickied thread, over in the Android Dev forum
http://forum.xda-developers.com/showthread.php?t=1306248
Having problems flashing CWM to Moto G 4.4 i get"ERROR Max Download size of 536870912 cannot load"
Can anyone help? Thanks
Marcusprit said:
Having problems flashing CWM to Moto G 4.4 i get"ERROR Max Download size of 536870912 cannot load"
Can anyone help? Thanks
Click to expand...
Click to collapse
You're either just going to have to use "fastboot boot recovery.img" (without quotes and where recovery.img is whatever the CWM file is named) instead of "fastboot flash recovery.img" or you will have to find a recovery.img that is small enough to actually flash. If you just use the boot method, this means you will have to reflash it every time you need something done with CWM.
es0tericcha0s said:
You're either just going to have to use "fastboot boot recovery.img" (without quotes and where recovery.img is whatever the CWM file is named) instead of "fastboot flash recovery.img" or you will have to find a recovery.img that is small enough to actually flash. If you just use the boot method, this means you will have to reflash it every time you need something done with CWM.
Click to expand...
Click to collapse
Hi thank you for your reply. I used fastboot boot recovery CWM6046-MotoG44.img but it cannot load recovery. I did read somewhere about sparse chunks in the US being 123 and 012 in the UK whatever that means. Is there anything else i can try?
I have unlocked the bootloader and rooted my phone, i really wanted to try some custom roms but without CWM its not possible
PS I am in the UK.
Marcusprit said:
Hi thank you for your reply. I used fastboot boot recovery CWM6046-MotoG44.img but it cannot load recovery. I did read somewhere about sparse chunks in the US being 123 and 012 in the UK whatever that means. Is there anything else i can try?
I have unlocked the bootloader and rooted my phone, i really wanted to try some custom roms but without CWM its not possible
PS I am in the UK.
Click to expand...
Click to collapse
Looks like you'll need the more updated version of CWM - 6.0.4.7 as that is built with Kit Kat sources and works with both 4.3 and 4.4 bootloaders. Or you can use the new TWRP 2.7.0. You can find links from here: http://forum.xda-developers.com/showthread.php?t=2608377
Hope this helps!
es0tericcha0s said:
Looks like you'll need the more updated version of CWM - 6.0.4.7 as that is built with Kit Kat sources and works with both 4.3 and 4.4 bootloaders. Or you can use the new TWRP 2.7.0. You can find links from here: http://forum.xda-developers.com/showthread.php?t=2608377
Hope this helps!
Click to expand...
Click to collapse
Thank you tried the updated versions but still won't load. I'm not sure what i'm doing wrong. I type in ADB DEVICES thats working fine then FASTBOOT DEVICES thats working too then i type in the recovery image but i get" ERROR CANNOT LOAD"
When i download the recovery image do i need to burn it onto a disk? I tried doing this but it says Disk image isn't valid.
Doesn't look like i'm going to be able to solve this problem.
Marcusprit said:
Thank you tried the updated versions but still won't load. I'm not sure what i'm doing wrong. I type in ADB DEVICES thats working fine then FASTBOOT DEVICES thats working too then i type in the recovery image but i get" ERROR CANNOT LOAD"
When i download the recovery image do i need to burn it onto a disk? I tried doing this but it says Disk image isn't valid.
Doesn't look like i'm going to be able to solve this problem.
Click to expand...
Click to collapse
Your device boots and is already rooted, right? If so, try to flash the updated img files with : https://play.google.com/store/apps/details?id=com.cgollner.flashify
recovery
Thank you I now have recovery
Marcusprit said:
Thank you I now have recovery
Click to expand...
Click to collapse
Hello,
I just purchased this phone knowing that it has this problem and I am trying to fix it but I do not know much about the original firmware or anything except of the following:
SKU: 6233A, MFG: 2014/05/30, HW: R1.6
I need to restore the Firmware and preferably be able to use the Dock Station (reason I bought it).
I also like to use it with T-Mobile and do not know if these phones are locket to ATT or not.
I am not a developer but have good technical knowledge.
Any advice will be appreciated.
Thank you
Mike
MH928 said:
Hello,
I just purchased this phone knowing that it has this problem and I am trying to fix it but I do not know much about the original firmware or anything except of the following:
SKU: 6233A, MFG: 2014/05/30, HW: R1.6
I need to restore the Firmware and preferably be able to use the Dock Station (reason I bought it).
I also like to use it with T-Mobile and do not know if these phones are locket to ATT or not.
I am not a developer but have good technical knowledge.
Any advice will be appreciated.
Thank you
Mike
Click to expand...
Click to collapse
Hopefully you can enter in to fastboot mode.
Try to reflash this ATT_userdebug rom from TWRP recovery, and then restore this backup.
1. Turn on the fastboot mode(vol up + power), plug in the cable to PC, open CMD, Boot in to twrp(fastboot boot recoveryyouchoose.img) and use "adb push filename.zip /sdcard"
2. install .zip then reboot
3. boot up, then boot back to TWRP recovery, make a backup.
4. boot up, copy the downloaded backup, boot back to recovery
5. restore it.
hope it works
paleszgergo said:
Hopefully you can enter in to fastboot mode.
Try to reflash this ATT_userdebug rom from TWRP recovery, and then restore this backup.
1. Turn on the fastboot mode(vol up + power), plug in the cable to PC, open CMD, Boot in to twrp(fastboot boot recoveryyouchoose.img) and use "adb push filename.zip /sdcard"
2. install .zip then reboot
3. boot up, then boot back to TWRP recovery, make a backup.
4. boot up, copy the downloaded backup, boot back to recovery
5. restore it.
hope it works
Click to expand...
Click to collapse
The second link (to restore) redirects to another Thread but most of the links there do not work, can you send me a direct link to the file?
MH928 said:
The second link (to restore) redirects to another Thread but most of the links there do not work, can you send me a direct link to the file?
Click to expand...
Click to collapse
I think he meant these for the second link.
http://forum.xda-developers.com/showpost.php?p=60403709&postcount=34
Edit: you must use twrp to flash these backups after user debug.
Justatechie said:
I think he meant these for the second link.
http://forum.xda-developers.com/showpost.php?p=60403709&postcount=34
Edit: you must use twrp to flash these backups after user debug.
Click to expand...
Click to collapse
Yeah, thats what i mean!
Please help. the same problem. Invalid boot. TWRP recovery i have already. please help step by step...
(why invalid boot? i flashed new recovery from Quarx to a boot partition )
Sirocco.ukr.lviv said:
Please help. the same problem. Invalid boot. TWRP recovery i have already. please help step by step...
(why invalid boot? i flashed new recovery from Quarx to a boot partition )
Click to expand...
Click to collapse
Is your Bootloader unlocked?
Justatechie said:
Is your Bootloader unlocked?
Click to expand...
Click to collapse
Locked bootloader. Where i can see for sure?
When VolUp+Power i can see this window
I need adb driver.
TWRP that i have on this phone is old one ported from nexus device and it can't see SD card.
Sirocco.ukr.lviv said:
Locked bootloader. Where i can see for sure?
When VolUp+Power i can see this window
I need adb driver.
TWRP that i have on this phone is old one ported from nexus device and it can't see SD card.
Click to expand...
Click to collapse
To find out, you have to put your phone into fastboot.
To do that power down your phone, then hold volume up and power button at the same time. There, the asus logo will pop up like normal and hang on that screen to show that you are in fastboot mode.
Open up command prompt and verify your device is connected, by typing in fastboot devices.
If it shows up good then all you have to do is type in fastboot oem device-info.
If it says device unlocked: true that means your BL is unlocked.
If its not, you have to download crowlock from the cm12 thread and flash it.
It works better with cwm but since you are stuck its worth a shot to flash it under old twrp.
Then check the BL status again, if its good great.
You could restore your device from some backups posted or if you could find a boot.img from the stock image, you could use the new version of twrp to flash the boot image under image flashing.
This is the adb/fastboot driver I use http://forum.xda-developers.com/showthread.php?t=2588979
Justatechie you are only one who help. i appreciate it. god bless you!
i've done it. unlocked already. i watched bootloop so i wiped everything. what rom to install?
del
Nice to hear that.
Well it depends if you want to install one or you want to keep it stock.
For keeping it stock unfortunately you must restore from backups posted.
If its custom well Cm is a good way, just the dock does not work, but it will work hopefully soon when the developer receives it soon.
Justatechie said:
Nice to hear that.
Well it depends if you want to install one or you want to keep it stock.
For keeping it stock unfortunately you must restore from backups posted.
If its custom well Cm is a good way, just the dock does not work, but it will work hopefully soon when the developer receives it soon.
Click to expand...
Click to collapse
My asus padfone x T00D with full wipes identifies like T00N (padfone s) and reboots on first welcome screen on your rom...
please see video:
https://www.youtube.com/watch?v=aMB9Ctvrk0Q
Sirocco.ukr.lviv said:
My asus padfone x T00D with full wipes identifies like T00N (padfone s) and reboots on first welcome screen on your rom...
please see video:
https://www.youtube.com/watch?v=aMB9Ctvrk0Q
Click to expand...
Click to collapse
Dont worry about the asus_toon, it will turn back into padfone x when you are finally able to restore to the at&t factory rom
What is very strange,is that you cannot wipe certain things, I guess It may be due to a tampered bootloader. (something must have tripped it up)
My bootloader is unlocked but not tampered.
But the reason why it says ASUS_T00N is because you installed cm or miui and it changed build prop and the partitions. (all of quarx roms are built from the pfs source but work on the pfx too) its not a big deal don't worry.
Have you tried any other recoveries, perhaps the older version of twrp Here
Try booting them through fastboot using the fastboot boot filename.img (of the recovery file that should be located inside a folder containg fastboot/adb files)
See if they can wipe cache data(no media) and system. Remember, booting from fastboot is just temporary
Then try flashing a rom, doesnt matter what it has to be but it should work after its done. Maybe flash without gapps, it could sometimes cause a random problem and besides you can always install it later.
I never had to use fastboot to wipe cache either because well I could do that in recovery, plus its safer
hi friends,
i was trying to root my phone before but my was briked.
then i flashed boot.img and recovery.img and then phone started.
but now i am trying to update new OS released. its not updating.
i tried to enter in recovery mode but it only shows icon.
i think its problem with recovery.img ?
can anyone provide link for orignal recovery.img for oneplus x ??
What root method did you use?
CafeKampuchia said:
What root method did you use?
Click to expand...
Click to collapse
i just following this link on forum and steps
http://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
Good, at least your bootloader is unlocked. Can you get it into fastboot mode?
CafeKampuchia said:
Good, at least your bootloader is unlocked. Can you get it into fastboot mode?
Click to expand...
Click to collapse
yes i can go in fastboot mode. but my phone is not rooted.
what shall i do ?
Rooting has nothing to do with flashing. Put it in bootloader mode and flash a recovery. Then try doing a factory reset. If that doesn't work, re-flash the ROM.
CafeKampuchia said:
Rooting has nothing to do with flashing. Put it in bootloader mode and flash a recovery. Then try doing a factory reset. If that doesn't work, re-flash the ROM.
Click to expand...
Click to collapse
Put it in bootloader mode and flash a recovery ??
i will enter in bootloader mode and then how to flash recovery? can you explain little? Thanks
It's all in step 5 of the guide you used to root the device on the first place. No need to re-write it here.
CafeKampuchia said:
It's all in the guide you used to root the device on the first place. No need to re-write it here.
Click to expand...
Click to collapse
actually i didn't understand which recovery to flash? twrp or stock ??
No offence, but you need to do more research and know how this stuff works before flashing things.
I can't answer your question because I don't know what you are trying to flash. Ask in the thread where you found it. If it's a custom ROM, TWRP Will work. If stock, stock recovery is best.
I'm signing off for a while. Good luck.
CafeKampuchia said:
No offence, but you need to do more research and know how this stuff works before flashing things.
I can't answer your question because I don't know what you are trying to flash. Ask in the thread where you found it. If it's a custom ROM, TWRP Will work. If stock, stock recovery is best.
I'm signing off for a while. Good luck.
Click to expand...
Click to collapse
i have flashed stock_recovery.img and now i can go to recovery mode.
but when i am trying to update to new OS, its failed. [ i tried from Settings -> check updates -> it download and go to recovery mode and says: installation failed.] also [ i directly go to recovery mode and maually install from Local and choose OnePlusOxygen_14_OTA_003-004_patch_201511031712.zip and still it says: failed to update.
help???
rahulcool said:
i have flashed stock_recovery.img and now i can go to recovery mode.
but when i am trying to update to new OS, its failed. [ i tried from Settings -> check updates -> it download and go to recovery mode and says: installation failed.] also [ i directly go to recovery mode and maually install from Local and choose OnePlusOxygen_14_OTA_003-004_patch_201511031712.zip and still it says: failed to update.
help???
Click to expand...
Click to collapse
Right, because the device is rooted. The first section of the routing guide tells you the problem (modified system position) and there are threads here to solve it.
CafeKampuchia said:
Right, because the device is rooted. The first section of the routing guide tells you the problem (modified system position) and there are threads here to solve it.
Click to expand...
Click to collapse
yes it was problem due to some incorrect rooting.
i flashed stock recovery.img and then i downloaded full rom and flashed it with help of memory card. and now the phone is working fine.
Thanks for all ur helps and post.
rahulcool said:
yes it was problem due to some incorrect rooting.
i flashed stock recovery.img and then i downloaded full rom and flashed it with help of memory card. and now the phone is working fine.
Thanks for all ur helps and post.
Click to expand...
Click to collapse
No prob, glad I could help. What rooting method did you originally use?
CafeKampuchia said:
No prob, glad I could help. What rooting method did you originally use?
Click to expand...
Click to collapse
http://www.android.gs/install-twrp-recovery-root-oneplus-x/
thats the method in above link , its same posted in this forum too.
i can't root my mobile, its showing error.
i will make new thread and post screenshot there,please check.
I bricked my one x its white and it wont boot trying to flash stock recovery but keeps complaing that device not unlocked i try fastboot oem unlock does it but phone wont boot just stuck at a oneplus sigh help would be appreciated to get my phone booting again.
jutley said:
I bricked my one x its white and it wont boot trying to flash stock recovery but keeps complaing that device not unlocked i try fastboot oem unlock does it but phone wont boot just stuck at a oneplus sigh help would be appreciated to get my phone booting again.
Click to expand...
Click to collapse
well that's why you need to unlock bootloader first before attempting to root your phone. and know what you are doing (flashing). With all that said if you can still boot to Recovery then flash this Full ROM (save this on an SD card) that should stop the bootloop and have a working ROM
https://www.androidfilehost.com/?fid=24269982087013219
If you can't boot to recovery or even bootloader this is your guide
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-x.417648/
jutley said:
I bricked my one x its white and it wont boot trying to flash stock recovery but keeps complaing that device not unlocked i try fastboot oem unlock does it but phone wont boot just stuck at a oneplus sigh help would be appreciated to get my phone booting again.
Click to expand...
Click to collapse
maybe try this?
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
jutley said:
I bricked my one x its white and it wont boot trying to flash stock recovery but keeps complaing that device not unlocked i try fastboot oem unlock does it but phone wont boot just stuck at a oneplus sigh help would be appreciated to get my phone booting again.
Click to expand...
Click to collapse
if you can still access bootloader then simply just boot TWRP from it, first download this full rom and save it on your SD card
https://www.androidfilehost.com/?fid=24269982087013219
then go to bootloader if you can still access it and boot TWRP
fastboot boot [whatever your twrp name is].img
you can download modified twrp here
http://forum.xda-developers.com/devdb/project/dl/?id=16464
then once inside TWRP just install the FULL ROM that was downloaded and saved in the SD card/
My phone boots into fastboot ok but there is no recovery wont boot. I try to flash recovery and it says it cant because not unlocked tried unlocking bootloader says its sucesfull but phone wont get bast boot logo.
I am using Asus zenfone 3. And I have installed TWRP in it. But the phone is not booting to system (os) . And the TWRP I installed , the touch does not work for it. If I boot to system, it shows the boot logo and turns off. What can I do now?
LavanTech said:
I am using Asus zenfone 3. And I have installed TWRP in it. But the phone is not booting to system (os) . And the TWRP I installed , the touch does not work for it. If I boot to system, it shows the boot logo and turns off. What can I do now?
Click to expand...
Click to collapse
To me it seems that phone's boot-loader is got corrupted. Not unusual when installing TWRP.
jwoegerbauer said:
To me it seems that phone's boot-loader is got corrupted. Not unusual when installing TWRP.
Click to expand...
Click to collapse
Do u have any solution??
LavanTech said:
Do u have any solution??
Click to expand...
Click to collapse
Did you have enabled in Developer Options the USB debugging & OEM unlock features before the device bricked.?
LavanTech said:
I am using Asus zenfone 3. And I have installed TWRP in it. But the phone is not booting to system (os) . And the TWRP I installed , the touch does not work for it. If I boot to system, it shows the boot logo and turns off. What can I do now?
Click to expand...
Click to collapse
Also I cannot install with flash tool , I'm getting unhandled exception error!
jwoegerbauer said:
Did you have enabled in Developer Options the USB debugging & OEM unlock features before the device bricked.?
Click to expand...
Click to collapse
Ya! I eabled usb debugging , unlocked bootloader also OEM unlock.
LavanTech said:
Also I cannot install with flash tool , I'm getting unhandled exception error!
Click to expand...
Click to collapse
Re--flash Stock Recovery.
jwoegerbauer said:
Re--flash Stock ROM.
Click to expand...
Click to collapse
Both are enabled!!!
LavanTech said:
Both are enabled!!!
Click to expand...
Click to collapse
I've edited the cited post. Re-read.
jwoegerbauer said:
Re--flash Stock Recovery.
Click to expand...
Click to collapse
I have stock rom downloaded, which software can I use to flash ?? Pls give any link to download.
jwoegerbauer said:
I've edited the cited post. Re-read.
Click to expand...
Click to collapse
Pls provide me link for downloading stock recovery and software to flash!
LavanTech said:
I have stock rom downloaded, which software can I use to flash ?? Pls give any link to download.
Click to expand...
Click to collapse
To get rid off of TWRP you flash Stock Recovery.
I think the correct command sequence is
Code:
adb reboot
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery <STOCK-RECOVERY-IMAGE-FILE>
fastboot reboot-bootloader
fastboot erase cache
fastboot reboot
Search for the appropriate Stock Recovery image by yourself. GIYF ...
If you instead want to re-flash Stock ROM then the correct command sequence would be
Code:
adb reboot
adb devices
adb reboot bootloader
fastboot devices
fastboot flash-all <STOCK-ROM-IMAGE-FILE>
fastboot reboot
Try going back to stock (Fastboot/download mode/Odin, depending on the device)
Thank You!
I have successfully went to fastboot mode and flashed the stock rom! Thank you for your support!! ?? The phone is working now in the Android 7.
BUT,
now if i install twrp custom recovery, i don't know what happens, after restarting to system i cannot boot to system , it just shows the boot animation and just goes off or sometimes it boots to fastboot mode.
then if i flash the stock rom again using the sd card in the the default recovery mode after flashing that stock recovery, it works again.
Also if I install TWRP recovery, TWRP could not install any Roms ! it just says that Updater process ended with error 6 or 7 randomly.
So, how do I install custom recovery and roms in it now?
LavanTech said:
So, how do I install custom recovery and roms in it now?
Click to expand...
Click to collapse
Assumed the TWRP.IMG you use is the correct one, then there is no need to install TWRP recovery, booting into it is fully enough - this will preserve device's Stock Recovery
Code:
fastboot devices
fastboot boot <TWRP.IMG>
The TWRP is booting perfectly! But if I install any zip file i.e ROM or Mods, it says that Updater process ended with error 6 or 7!!
This is the problem with TWRP.
And, if install TWRP in the phone, then restart the phone , if I restart to system, it doesn't work ,just it shows the boot animation and turns off.
LavanTech said:
The TWRP is booting perfectly! But if I install any zip file i.e ROM or Mods, it says that Updater process ended with error 6 or 7!!
This is the problem with TWRP.
Click to expand...
Click to collapse
This is not TWRP recovery related, but it's related to the Custom ROM zip-file you try to flash: The ROM zip-file you try to flash isn't made for your device.
jwoegerbauer said:
This is not TWRP recovery related, but it's related to the Custom ROM zip-file you try to flash: The ROM zip-file you try to flash isn't made for your device.
Click to expand...
Click to collapse
I'm trying to flash ASUS ZENFONE 3 LINEAGE OS 16
MY DEVICE : ASUS ZENFONE 3 ZE552KL
THE FILE : https://mirrorbits.lineageos.org/fu...age-16.0-20200727-nightly-zenfone3-signed.zip
I am using the file which is for my device only! But it is not working, what should I do?
LavanTech said:
I'm trying to flash ASUS ZENFONE 3 LINEAGE OS 16
MY DEVICE : ASUS ZENFONE 3 ZE552KL
THE FILE : https://mirrorbits.lineageos.org/fu...age-16.0-20200727-nightly-zenfone3-signed.zip
I am using the file which is for my device only! But it is not working, what should I do?
Click to expand...
Click to collapse
Start a new thread ...
Here is the new thread
Here is the new thread :- https://forum.xda-developers.com/android/help/twrp-issues-asus-zenfone-3-t4145317