Hello, ive been experiencing some headset issue with the latest update on cyanogen mod 10.1 for samsung galaxy gt s6500 (mini II). The thing is that there is propably a bug that doesnt immediately recognizes headset so you got to put it slowly until you can hear through your headset :good:
Related
Hey guys,
yesterday i installed the MIUI rom on my fascinate and it is working great, but today i found out that my phone is in headset mode when no headphones are in and the speakers are on when i plug in a headset,
any solution??
thanks
Samsung 3.5mm to 3.5mm Headset Adapter with Microphone EMC40AONME (GH59-07603A).
Today I got a Galaxy S2, works fine Stock headset works like a charm.
But my Samsung GH59-07603A with a normal headset only works when I press the button. If I don't press it the sound is very quite and sound bad (crunchy).
I tested used this headset all day yesterday and this morning on my Galaxy S and there it works like a charm. Somebody know what the problem could be.
Running 4.0.3
Baseband I9100XXLPQ
Kernel 3.0.15.I9100XXLPJ-CL140368 (rooted)
Cheers
Hi!
I bought a Plantronics M165 MARQUE 2 headset for my S3 and since day one i've had problems like:
Can't here the caller, very loud noise at the caller end when i answer the call.
Often i have to pair the device again to get media sound, sometimes it connects just to the media sound.
Droping connection in the middle of a call and so on.
Can someone please tell me if i am alone with this problem?
I have flashed now a Nordic ROM latest 4.1.2 ROM (See sig).
I have gotten 1 new device from Plantronics sent to me and that one is the one i have now and are having similair problem with.
At Plantronics they now want to blame my S3 and want me to send it in for repair or check up because he thinks it can't use a BlueTooth device newer than 2 year because my old Plantronics M20 headset is working fine and have had 0 problems.
i have galaxy s3 with offical 4.1.2 firmware
when i am in bluetooth call, no matter if it is with my platronix headset or in my bluetooth car handsfree,
during a call the vocie became low and the other side can't hear me.
in the car there is a big feedback !!
only when i push "headset" button to turn off and then on the problem sloves.
it can happen a few times in the same call!!
tried to hard reset, it happend on 4.0.4, 4.1.1 and all other official versition before.
any idea?
i am about to throw the phone on the floor when it's happen!!
regards,
ziv
I have exact problem with my Jawbone ERA and Pioneer head unit. Has anyone solved this?
Hey good people,
Please help me with this problem here.
The mic volume when I connect my phone to the car is too feeble.
My current setup:
Phone - Samsung Galaxy S2 (i9100)
ROM - NeatRom v8.0
Car Head Unit - JVC KD-R736BT.
Diagnosed that the head unit has no problem at all. It works perfectly with good volume levels with a basic nokia phone.
What I've tried so far to kill the problem on the S2:
Installed Volume+
Tried increasing volume levels in Service mode
All the above are of no use.
Please help with a permanent fix.
Thanks,
Vinay
vinay.habib said:
Hey good people,
Please help me with this problem here.
The mic volume when I connect my phone to the car is too feeble.
My current setup:
Phone - Samsung Galaxy S2 (i9100)
ROM - NeatRom v8.0
Car Head Unit - JVC KD-R736BT.
Diagnosed that the head unit has no problem at all. It works perfectly with good volume levels with a basic nokia phone.
What I've tried so far to kill the problem on the S2:
Installed Volume+
Tried increasing volume levels in Service mode
All the above are of no use.
Please help with a permanent fix.
Thanks,
Vinay
Click to expand...
Click to collapse
Could NeatRom team consider having this rectified?
Guys it should have nothing to do with custom rom, since recently i tested the latest official 4.1.2 rom for i9100 with same results. (i'm using a Sony SBH50 bluetooth model).
The mic volume is very low, meaning that when in a call, i can hear great from bluetooth but the listener hears me like i am 10 ft away from mic...