Hi all, first of all apologies for my English ...
I have single micro sim MTK6575 I9300 800x600 Android version 4.1.19.
I tried to make do with the problem of synchronization gmail contacts and it tried to install gapps-ics-20120429-signed.zip via CWM and I returned "Error: Invalid OTA package. Missing scatter ..." probe with other versions of gapps error and gave me Signature error ...
So much reading I found behind a guy who sent the files in System had to be replaced and how many people appreciated, so I follow his advice and I copied those files ... I went to restart the message "unfortunately the process com.android.phone has stopped" very often and the phone was very unstable ... but yes, Android show me the possibility of synchronization my contacts ...
On another forum I read that this was enough to get right to make a "wipe cache partition" from recovery mode ... so in my ignorance, I did ....
The result is that the message "unfortunately the process com.android.phone has stopped" appears continuously, to the point that I can not even finish the setup tutorial... now I have a mobile where I can't do anything...but it's fine.
I have a ROM, but I SP_Flash_Tool_v3.1224.01 doesn't recognize the phone (I can not access USB debugging Setting up for your Android device) in my PC the driver is installed beacause yesterday I tried.
- I have a rom not recognize the Recovery mode to put it from "apply update from sdcard2"
Nor do I have a cwm with gapps that the recovery mode accepts.
I do not know if I'm missing something ... but the truth is that after so much error I'm pretty sure I'll brick my phone in my next try..
I would appreciate thoughts .. for sure in my ignorance I'm having an simple option ... I have the opcion of spend two days more reading about to make the convert Stock ROM flashable ZIP
Thanks in advance
Finally I get a ROM and back to 4.1.19 no syncronize contact but no crash with continuos "unfortunately the process com.android.phone has stopped" errors
If somebody know how to fix not sincronize I apretiate too much
For SP flash tool you need the correct drivers and here is the site to install the ADB drivers or you can search over the Internet its easy to find......
Can you get to the settings? Then go there and wipe the data and cache of phone and contacts under application settings
maybe you can get out of this mess:good:
Related
"the process com.android.phone has stopped unexpectedly" loop after installing CM7
Hey.
CM7 doesn't work for me... I keep getting this error message in loop every like 2-3 seconds.
I came across that page: http://code.google.com/p/cyanogenmod/issues/detail?id=2928. Tried to do as comment 97 says (i'm on another rom right now), so i downloaded sqlite and put my phone on airplane mod, but when I get into settings.db all I find is a line of "null" and I get stuck.
any suggestions? I really want CM7 to work on my phone!
Did you wipe before flashing?
Note, you should ask this question in the Q&A from Cyanogenmod.
Yes, full wipe (the all three).
And you mean to ask this in cyanogenmod forum also?
Help someone...?
Ask in the relevant rom thread makes sense .
Or factory reset .
jje
try "fix permissions" (rom manager)??
i was having the same problem-'com.android.phone has stopped unexpectedly'
i opened ROM Manager in CM7 and clicked on 'Fix Permissions"..............
it worked for me..!!
Just received this error
I had the same problem after restoring data from titanium back up. I installed CM9 on defy+ and on rebooting after the data restore. The phone started showing this error and kept rebooting.
What I've done:
> Kept the mobile in flight mode
> Opened app settings of "Phone" and cleared data and turned off airplane mode
No success! The phone kept rebooting
Then I opened titanium backup and wiped data of that app and turned off flight mode.
I din receive the error again
defypls said:
I installed CM9 on defy+ and on rebooting after the data restore. The phone started showing this error and kept rebooting.
Click to expand...
Click to collapse
This forum is for the I9100, and this irrelevant thread you bumped hasn't had a post in six months.
Oops! Sorry about that. I din even notice its galaxy forum.. I was having same prob and kinda solved it myself while looking for solution. So posted it.
Sent from my MB526 using XDA
usually the prblm comes frm titanium bck wen restored wiv sys apps.the best way to avoid such prblm is install apps one by one.or do a clean wipe
Error Message S3
"the application phone process com.android.phone has stopped unexpectedly please try again.
What does this mean and how to solve it . i do not know any programming or other stuff.. please guide me step by step.
or post a usefull link for me .. Thankss
Hi! I'm trying to repair an ipro s3pro (an mtk6577-based galaxy s3 clone) which has a big problem: it doesn't call!
It's rooted and I think it doesn't have a working recovery because I can't enter it (neither I can enter fastboot) neither by adb nor by using some app on the phone... It just powers off of reboots. If I wipe it from settings, it does nothing but rebooting or halting, like if recovery doesn't exist.
The phone problem is that it has a dialogue stating "process com.android.phone has stopped" which once closed opens again and again and again, unallowing to do anything... With logcat I saw it was something related to drawable resources if I'm not wrong... I first tried to remove Phone.odex from /system/app and the error disappeared but the phone doesn't still work: the settings->about->phone info window makes com.android.phone crash because of something like "PhoneFactory.getDefaultPhone must be called from Looper thread" and the same does *#*#4636#*#*->phone info... If I try to dial a number it infinitely does network scan (it did the same also initially, but it took ten minutes to compose a number because of the force closes)... So, where can I find a system image, a stock ROM, any other ROM for this phone, or anything can help me to make it work? I tried other Phone.apk from some stock ROM or some generic mtk ROM but with no success. Also a custom (or even stock) recovery would be appreciated... What else could I do? Extract the kernel and insert it into a generic mtk ROM and then flash it?
Help me please!!!!
P.s sorry if this wasn't the best category for this, but I couldn't find anything better...
Hello.
Today I've tried to install my first KitKat-custom-rom om my device (Xperia Neo / Hallon). The fastboot of the boot.img etc. was sucessful. Also the installation of the ROM (in CWM) said that it was completed. Furthermroe the reboot was not conspicuous. But now (after the boot, where you normally can choose your language) I get this error "Unfortunately, the process com.android.phone has stopped". What I have done wrong? I also have tried Ultrakat, but get the same error. Please help me! I need my thelephone. Thanks. Bergfex
Simple issue
Bergfex2 said:
Hello.
Today I've tried to install my first KitKat-custom-rom om my device (Xperia Neo / Hallon). The fastboot of the boot.img etc. was sucessful. Also the installation of the ROM (in CWM) said that it was completed. Furthermroe the reboot was not conspicuous. But now (after the boot, where you normally can choose your language) I get this error "Unfortunately, the process com.android.phone has stopped". What I have done wrong? I also have tried Ultrakat, but get the same error. Please help me! I need my thelephone. Thanks. Bergfex
Click to expand...
Click to collapse
Just install the ROM and leave flashing gapps..... it will work..... Also try flashing different gapps.... you can try banks minimal gapps...
Try different rom
If your phone starts up now and ur able to go to developer settings try
Settings - developer options - launch tools - bad behaviour - crash the main app thread
My Vega Iron suddenly restart and encountered this error "System Restart because of Application Error". The first time, it restarted just fine but on the second one it always stucked at L+ Logo. I already tried factory reset on the stock recovery but it didn't solved it. I also tried the Vega Self Upgrade but always have an error on USB Driver on 3 PCs I used. I can't find any help on the net on how to properly run it. Then I tried to flash a latest firmware but with sms fix using CWM Recovery but still encounter same error. I actually found a vietnamese forum with the error but I can't understand even if I translate it.
Can anyone please help me? Current firmware is S1235210.
Hi
My friend sold a TeXet 9768HD to a someone.
Now the customer returned it with a wired problem.
When the tablet boots up and loads OS (Jellybean.rus.texet 4.2.2), "unfortunately fingerprint unlock has stopped working". It show this error nonstop, every time i click on "OK" it comes back in a blink, with lots of pain! i went to Settings then Apps and saw this "FingerPrint Unlock" there, But like system apps it doesn't have "Remove/Uninstall" option. I can't install anything on it, because this error message is on the screen all the time.
So i tried to use both "Force Stop" and "Disable" options, but regardless of that the error still comes up.
I've no idea what to do. My friend asked me to flash it, but since (obviously) TeXet no longer is active, there's no support.
"Wipe/factory reset" and "Clear cache" in recovery didn't solve the problem too.
When i pluged it to PC, it can't be recognized. But after installing "Rockchip Tool" not Flashing tools seems to show it.
Now the question is:
1st What is that problem and is there any way to solve it without flashing?
2nd if not what ROM would you suggest me to flash on it?
Thanks