hello!
i wanna test HD2 gps driver with mine Acer neoTouch (same chip, same GPS). anybody can help me - and tell - how to get GPS drivers from HD2 rom?
i install kitchen, but did not found proper DLLs.
thx in advance!
drivers
In the windows folder is a file / gpsdriver.dll /
theres a few other related files too.
not sure if this question is in the correct place - im sure moderators will move it if its not ..
Did you find out the answer?
I need to extract all my drivers, plz help...
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Couldn't find much on this tablet. I would also like to do the same as you. My wife won this tablet at an arcade and think it would be a pretty decent unit if it didn't run so slow. Did you manage to find anything out? I'm going to look around myself. I've been doing AOKP builds, I might sync up Troys and mess around with it this week.
No info still. I don't have an experience in building the compatibility patches. But it should be doable with files I've provided and someone who can do it.
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
Kocaso M1050S the .img link is broken. I will be grateful if you able to provide me with correct one. and another question: how did you install CWM recovery. thx in advance.
Same here, haven't had time to try and mess with it. I'm going to download a pack and see whats done in there. I'm going to switch into Ubuntu in a few and try and sync with CT's git as well.
I installed CWM 6.0.1.2 using this tutorial :
http://forum.xda-developers.com/showthread.php?t=1802268
It seems to work so far. It reads my SD card and I was able to perform a backup. I've done nothing else at all with it yet so i'm not sure if it's really working properly but so far my device is still working fine.
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
Also I got the files you are looking for from another site.
Google this exactly :
MID_M1050s(chinese) bricked at android screen
As i'm unsure if outside links are ok here. It should be the first result. It's posted further down the thread.
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
working one for me
NStorm said:
Right, here is the new download link for firmware: docs.google.com/folder/d/0B_88d7OJP9HPWWEwejlSQkQ0X2s/edit
I'm still looking for CM10 mod...
Click to expand...
Click to collapse
Thank you! But this firmware stops at 3 percent of flashing.
I finally found a working version and http://www.irexsoft.com/M1050_bc1003.img
I think that we can take device drivers from it for CM10)
kocaso m760 stuck in bootloop.....kind of
NStorm said:
Hello community!
I'm looking for help to build a Kocaso M1050S compatibility pack for CM10 (http://forum.xda-developers.com/showthread.php?t=1821398).
It should be a recovery based zip mod, but I'm not sure how to build it.
I've downloaded an original firmware from here: dl [dot] dropbox [dot] com/u/22474333/Kocaso_M1050S_Softwinners_Crane-bc1003_ICS_4.0.4_ENG_Build_%2318_Firmware.img and works just fine. Now I'm looking a way of running Christian Troy CM10 port on it. The port works itself, but the touchscreen doesn't responds at all. So seems like I need to apply a correct drivers there. I've unpacked original firmware and included all required files from it (script.fex, complete modules and etc directory, idc and icu, /lib/hw). I guess that is enough to build the patch for it. Here is the smaller archive for these files, so you don't have to download the complete firmware: www [dot] multiupload [dot] nl/A4WUIS15D3
Could somebody please help to build a recovery patch from these files?
EDIT: Oh, and here is the init.sun4i.rc from firmware: pastebin [dot] com/qNguiS75
Click to expand...
Click to collapse
hi there i hate to be a noob but i have a kocaso m760. i tried the vold fstab memory swap trick, now im in bootloop, but the tablet will only work while plug and accessed by adb. when i unplug it bootloops. i downloaded my devices firmware, but cant find a .img file to restore to. any suggestions would help. thanx
Hi,
Been trying desperately to get cifs.ko modules for my Lenovo Yoga tablet but am not able to compile one myself.
The source code for the kernel in this device is available from Lenovo at http:// mobilesupport.lenovo.com/en-us/products/yoga_tablet_8?tabname=downloads
Could somebody please compile the needed modules to mount network shares on this tablet? Myself and some friends of mine with the same device would be extremely grateful.
Or maybe one of the Mods can move this post to the Development section if this isn't the right place to ask?
I have a phone "Elephone P9000" and I realy would like ubuntu touch on it,
I have the stock rom files to help you and the company respond quickly if you need any more info to port the rom,
Anyone able to help me?
thanks -jake
I have the device tree and driver sources
Hi.
I have downloaded the RTL8188CU drivers for Android but I don't know how to compile or install it. Someone can help me?
Driver link: mega. nz/#!cTQkBaZS!0v61f8Kaek7GcFRlLdeOVbRUXVyFaFRVTlpiybYhbmU
valid link
please can you provide a valid link because i need the driver