[Q] **HELP** Samssung Galaxy s3 stuck at booting screen - Galaxy S III Q&A, Help & Troubleshooting

Hey guys first of all you have to know that im German and a student so sorry for my english.
My device: Samsung galaxy s3 (intl.)
I booted my phone and flashed my kernel some days ago and everything worked fine, then with the 4.2 update samsung hided the developer options on the devices. I knew that, and `activated` the dev. options again. Then i was scrolling around there and i enabled simulate secondary displays or something like that.. after doing that my Device rebooted on and on. It hanged upwhen i had to fill in my pin. At that point it booted again and again. Couldn´t do anything. I can get in cwm.
So my Problem now is that i `full wiped` my phone which i think means i wiped data/factory reset, then i wiped cache, then wiped delvik cache,then i formated /system AND i think data.. after that i installed cm and gapps again but my Phone stucks at the booting screen i really don´t know what to do. Please help me.
I can´t find the correct Version of the Stuck Rom too.. i think its not available for German devices or something.
Thanks :crying::crying:

mietzemaunz said:
Hey guys first of all you have to know that im German and a student so sorry for my english.
My device: Samsung galaxy s3 (intl.)
I booted my phone and flashed my kernel some days ago and everything worked fine, then with the 4.2 update samsung hided the developer options on the devices. I knew that, and `activated` the dev. options again. Then i was scrolling around there and i enabled simulate secondary displays or something like that.. after doing that my Device rebooted on and on. It hanged upwhen i had to fill in my pin. At that point it booted again and again. Couldn´t do anything. I can get in cwm.
So my Problem now is that i `full wiped` my phone which i think means i wiped data/factory reset, then i wiped cache, then wiped delvik cache,then i formated /system AND i think data.. after that i installed cm and gapps again but my Phone stucks at the booting screen i really don´t know what to do. Please help me.
I can´t find the correct Version of the Stuck Rom too.. i think its not available for German devices or something.
Thanks :crying::crying:
Click to expand...
Click to collapse
sammobile.com for stock roms.

rootSU said:
sammobile.com for stock roms.
Click to expand...
Click to collapse
i know but my rom for my device isn´t there.. I reseted it to stuck with an Stuck rom from another surce it keeeps stucking at the samsung galaxy s3 booting screen

You have installed a leaked beta, not an update from Samsung.
Follow the guide in general stickies on how to return your phone to stock. Sammobile does have firmware for i9300 in Germany.

Hmm I think it's more CM or gapps issue if you can't boot up your phone with these things.
If you can go into download mode you can try to flash Stock Rom using Odin.
And always remember before flashing custom roms make a backup of the stock one.

Simonna said:
Hmm I think it's more CM or gapps issue if you can't boot up your phone with these things.
If you can go into download mode you can try to flash Stock Rom using Odin.
And always remember before flashing custom roms make a backup of the stock one.
Click to expand...
Click to collapse
i got it work again but my wifi doesnt works.. i installed cm and gapps a few times new but i just dont want to work..
someone got a soultion

Just take it back to stock.
Sent from my GT-I9300 using Tapatalk 4

Related

Problem with booting phone

I recently updated my phone from 2.3.3 to Cyanogenmod 7.1 I believe and went to overclock the phone, Unfortunately, I overclocked it too much and now it is stuck in an endless loop on the boot screen..
Phone is obviously a Galaxy Ace, Network carrier is Vodafone UK.
I have been trying for the last two hours to look for answer's on how to fix this and I haven't found anything, So I thought the best idea was to come to here.. Any help would be appreciated, I have also tried to install other ROM's on to the phone to correct it but it look's like the CPU is still at the overclocked setting and because of that, Won't boot up.
thanks.
Dan.
go to recovery and wipe data+cache and try to boot..
if still no luck --> ODIN
madman_amit said:
go to recovery and wipe data+cache and try to boot..
if still no luck --> ODIN
Click to expand...
Click to collapse
I tried wiping everything before but will give ODIN a try. Thank you. I really like the phone and am trying my best to get it working again. lol
So, I downloaded ODIN and I have absolutely no idea what I am doing.. I don't want to risk breaking the phone anymore.. The only tut on how to use ODIN is for the Galaxy 3..
I have never done anything like this before so it's all new to me.. :/
Ok, I used ODIN and I have the original ROM that came with the phone, But still in an endless loop on the Samsung boot screen.. :/ I am totally stuck now.. I have tried all I know to get it to work
I managed to sort the problem, the "One Package" on ODIN didn't work, Luckily I had the 4 seperate files needed on my laptop, So all is workign now.
Th3GrimRipp3r said:
I managed to sort the problem, the "One Package" on ODIN didn't work, Luckily I had the 4 seperate files needed on my laptop, So all is workign now.
Click to expand...
Click to collapse
Excellent work having a backup on your laptop. First thing now do a full backup on your phone before you think about further experiment. If overclocking make sure "set at boot" is not ticked. Finally read up a little on xda before you do anything - a good place to start is "Tutorial" on top of dev section and the "q & a " thread here.
I hope this works for You.
You've a one packege STOCK Rom?
so open ODIN 4.38
Untick Reset Time
Choose your one package file.
choose OPS; attatched here.
press start.
to sum up: you have this ticked only:One package, auto reboot, protect OPS
if doesnot work go to recovery and try factory reset& cache wipe.
if doesnot work, try flshing CWM and install any backed up rom, if you want one. just PM and i will upload backed up stock rom.
I really hope it helps because I got the same issue after flshing a stock from ODIN, but been removed from wipe data& factory reset.
_________________________________________________
If I've helped you in any way, Press THANKS

Stuck at samsung screen after flusing kernel

stuck at samsung screen after flashing latest kernel from pershoot, and also i cant access my storage
im kinda new to this so please help me .
________________________________________________________________________________________________________________________________
btw, i think i found the problem, the latest kernel is for ICS but my tab is still using stock rom which is JB,
so how i can repair this problem?
Yes...me also stuck.
Than I get back to Recovery and reflash again Galaxy Task v14 - comes back to a live.
But now after I shut down screen or go to sleep my screen gets error (can't see anything - just lines)
Try to reflash or restarts - doesnt help.
Any idea?
LVNona said:
Yes...me also stuck.
Than I get back to Recovery and reflash again Galaxy Task v14 - comes back to a live.
But now after I shut down screen or go to sleep my screen gets error (can't see anything - just lines)
Try to reflash or restarts - doesnt help.
Any idea?
Click to expand...
Click to collapse
i cant even access my storage how am i gonna copy any rom to flash
catalan90_V said:
i cant even access my storage how am i gonna copy any rom to flash
Click to expand...
Click to collapse
If you don't have a custom rom in your sdcard, then maybe you can push it with adb? Or you can always flash back to stock with odin.
Sent from my amazing 10.1 galaxy tab
catalan90_V said:
stuck at samsung screen after flashing latest kernel from pershoot, and also i cant access my storage
im kinda new to this so please help me .
________________________________________________________________________________________________________________________________
btw, i think i found the problem, the latest kernel is for ICS but my tab is still using stock rom which is JB,
so how i can repair this problem?
Click to expand...
Click to collapse
Use the AOKP rom which is ICS and has the kernel in it already. I installed it on my galaxy tab 10.1 p7510 and it works fine. Since I'm a "new" user I can't post the link but just google AOKP and you'll see their site, look for Milestone 6, thats the rom you want.
LVNona said:
Yes...me also stuck.
Than I get back to Recovery and reflash again Galaxy Task v14 - comes back to a live.
But now after I shut down screen or go to sleep my screen gets error (can't see anything - just lines)
Try to reflash or restarts - doesnt help.
Any idea?
Click to expand...
Click to collapse
This is caused by the kernel I believe. Try clearing all the caches in clockwork recovery mod and see if that fixes it (delvik and so on). By the way, clearing those caches will make it take longer than usual to start up so you should leave it alone for at least 15-20 min to be safe. If after that much time has pass and it still hasn't booted up completely, I'd consider flashing a different rom on it. The AOKP rom has the overclock kernel in it and is stable without those lines that appear after you turn the screen off and back on after a fresh OS install. Use Odin to flash the new rom if you cannot access the SD card.
tq guys, the problem already resolve
i pushed rom file using adb and install it with cwm

[Q] Galaxy S2 i9100 stock firmware restore

Hi everyone,
I gave it a shot at rooting my phone and upgrading it from android 4.0.3 to 4.2.1 (rootbox) but I failed miserably. Somewhere in between the phone got stuck at that warning yellow marker and it would only allow me to get into download mode. After trying 5-6 different firmware versions, I finally managed to get one of them to work with Odin and the phone works once again but this firmware version does not work with kies.
I have no idea what the original version was, but I can get all the details from an identical phone from the same operator if you tell me what would be needed. I know it is a silly question, but is there a way to download the firmware from another identical phone used by the same operator?
I want to either restore the phone to a firmware version of local Swiss operator or properly manage to upgrade the firmware to a light version of android so I won't have to deal anymore with all those useless default apps which start automatically and eat up the battery.
I welcome any and all advices.
Thanks in advance.
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
You can download stock from
http://www.sammobile.com/firmwares/ just search for your phone and carrier then flash back to stock.
As the previous post said did you wipe first? Try a factory reset then flash the rom.
Sent from my GT-I9100 using xda app-developers app
danskiro said:
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
Click to expand...
Click to collapse
Thanks a lot for the help. With this new firmware on I finally managed to install RootBox 3.8 with Android 4.2.2.
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
gn82 said:
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
Click to expand...
Click to collapse
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
WardenBerret said:
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
Click to expand...
Click to collapse
Thanks for the feedback. Be it basic or not, it simply does not work. I used the basic Rootbox as described in this thread.
1. No matter how much I move my fingers on the screen no menu appears
2. System settings >> Sound >> "vibrate on touch" is disabled yet the phone vibrates when I type on the screen keyboard which is really annoying to others if I am in a meeting ... I googled for about 6 hours for a solution and when I failed to find one I posted here. I am sure that the time of everyone here is quite precious I would never want to waste it.
Flash stock jb with mobile odin and that's that.
Sent from the little guy
gastonw said:
Flash stock jb with mobile odin and that's that.
Sent from the little guy
Click to expand...
Click to collapse
Thanks a lot gastonw. I am now cMIUI which should be based on CM10 and even though it is based on Android 4.1.2 instead of 4.2.2 it is still running great.
Good news then
Sent from the little guy
Stuck at samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Click to expand...
Click to collapse
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
now trying to install a stock rom
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
algorithm101 said:
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
Click to expand...
Click to collapse
If you're attempting to flash a stock ROM through CWM recovery, stop now. That'll never work. The only way to flash a stock ROM is to use Odin, Mobile Odin (which in your case won't work, requires phone to boot) or Heimdall (I've never used this personally). So if you're using recovery, DON'T flash stock. You have two options to flash a ROM at present:
1) Stock ROM using Odin
2) Custom ROM using CWM recovery.
Done and working Thanks a Lot
Hopper8 said:
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
Click to expand...
Click to collapse
I flashed into stock rom XXLSJ variant. phone is working fine but lost access to root. in order to regain recovery menu i rooted my phone.
1. Now i want to backup my ROM using titanium backup. But its stuck at Gaining Root Access Screen What do i do now?
2. Stweaks,Super User and CWM have disappeared how do i get it back??
3. Strange thing Whatsapp is not working Unable to connect using my datapack
4. Can i Software update irrespective of the JB Stock ROMs region I am from.
Good job getting it working again now, time for you to do some reading. Read about what flashing a custom kernel will do for you. Then pick one that's compatible with your firmware and flash it.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Stuck on boot logo
Hi i just flashed the stock firmware acquired from this link:
http://www.sammobile.com/firmwares/3/?download=12748
I got all green in Odin v1.85 but it is stuck on the boot logo
I have rooted/flashed my phone many times so I'm quite confused.
Help much appreciated!!
Wipe data/factory reset?
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Which is the main stock firmware for the i9100?
Hi I am using a vodafone UK branded i9100 firmware and recently decided to cancel my contract. I would like to flash to a stock JB but im not sure which is the right one to download.
I checked the firmware on sammobile but still unsure. Please see attached file.
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
gastonw said:
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
Click to expand...
Click to collapse
Can you flash any s2 stock rom? I see there is difference in the modem code for different countries...
I have
PDA: I9100XWLSH
CSC: I9100OPSLSB
MODEM: I9100XXLS9
So i belive only this ver of stock rom can be flashed???

Soft Bricked my MEGA :< i9205

Hello all
I attempted to root and CWM my Mega and that seemed to go fine..
I can run CWM 6032 without issues
So I proceeded to install a custom rom I firstly did full wipe / cache and dalvik then installed the rom.
It boots to samsung logo and just hangs..
So I went back to the drawing board..Dled fresh tar img flashed with odin just had auto reboot and F.reset time ticked but the phone is still stuck at the samsung logo and not doing anything else..
I just got this amazing phone and its bricked already
Starting to panic
Please help
Jonny
OK After a good nights sleep things dont seem so bad
I got stock firmware loaded but I had to go into the stock recovery after the flash and do another factory reset / cache wipe
Jonny
:laugh:
Jonny5isalivetm said:
OK After a good nights sleep things dont seem so bad
I got stock firmware loaded but I had to go into the stock recovery after the flash and do another factory reset / cache wipe
Jonny
:laugh:
Click to expand...
Click to collapse
Good for you
I remember my first few flashes, with the little bootloop panic...
Usually, if one takes the time too pause and read and think (very probably someone had the issue, and the answer is here in the forums), then all those little issues can be fixed without too much trouble
hi man :>
i have flashed other phones before but noone gave me as much trouble as the mega..
glad she is running now
Real smooth atm with silentnight rom + an app off the store to decrease cpu speed..currently at 700mhz and i cant tell the difference!
Thanks for reply man
Yeah, every phone has its way.
I used to have HTC phones, and those seem to be the most annoying ones, with software updates locking the bootloader and such annoyances.
It might have changed now, though
I always make nandroid backup before flashing new rom, just in case things happen
Sent from my GT-I9152 using XDA Premium 4 mobile app
Bricked sgh-1527m
Hi,
I am wondering if you have any tips or info on unbricking my phone.
I seem to be having this same problem.
It has to do with a knox update i believe.
you mention a bootloader lock..is their some method to unlock so that it will allow me to flash the rom again.
any information would be greatly appreciated..I am getting a crash course in this trying to get my phone back up and running
thanks
Chris
kipue said:
Yeah, every phone has its way.
I used to have HTC phones, and those seem to be the most annoying ones, with software updates locking the bootloader and such annoyances.
It might have changed now, though
Click to expand...
Click to collapse
Jonny5isalivetm said:
Hello all
I attempted to root and CWM my Mega and that seemed to go fine..
I can run CWM 6032 without issues
So I proceeded to install a custom rom I firstly did full wipe / cache and dalvik then installed the rom.
It boots to samsung logo and just hangs..
So I went back to the drawing board..Dled fresh tar img flashed with odin just had auto reboot and F.reset time ticked but the phone is still stuck at the samsung logo and not doing anything else..
I just got this amazing phone and its bricked already
Starting to panic
Please help
Jonny
Click to expand...
Click to collapse
can you tell me how u root ur GT-I9205 ?? my attempts to root have made my samsung galaxy mega goes into a condition where...
1) when it boots up, there are sounds but no logo
2)i tried the custom recoveries,, it works fine
3) i tried the download mode,, there is only black screen,,,
please help me as a fellow gt-i9205 ...

Stuck at Recovery and can't boot android

So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im guessing you wiped device and if you go into recovery and try to reboot system it will tell you no os installed if that is the case you can plug device into computer and still use twrp as file manager thats if you had a backup stored on desktop or drag a CM zip to device .
other method of course would be to enter download mode and use odin to flash stock firmware for your device not sure if you have t399 or the N varient lastest beening OH2/OH3 you can find that in my filehost i have stock odin zips to flash.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Koohara947 said:
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Click to expand...
Click to collapse
Which stock rom did you use?
_PAG_ said:
Which stock rom did you use?
Click to expand...
Click to collapse
I used the download from this guide by ShabbyPenguin: http://androidforums.com/threads/guide-restore-your-galaxy-light-to-stock-mja.846767/
Hey guys...I did the same thing but my t399 must have lost battery charge because when I picked it back up, it was dead...I plugged in and it started flashing the Samsung screen slowly at me. It would not reboot. I did get download and twrp to show up and start to atleast work enough to flash and Odin again...I used Shabby's kernel source and it is still doing the same thing after flashing through Odin. Still stuck on Samsung screen slowly flashing and recovery shows no operating system. I'm about to put it back in a drawer but I feel it's so close that I had to ask for help. I flashed shabby work to root and recovery. I flashed twrp 2.7 and the cm12 beta rom. Then back to shabby guide to get it to recognize, it did..kind of..but still boot looped. Flashed 3 times... No changes. Can anyone help or is it time for a staircase? hA!
Oh yes .. I don't think the battery is bad.. I checked it with a meter and it reads voltage. It does get pretty hot while I'm working on it though and my pc shows its charged at 100% but the phone doesn't show that...it stays in like dead mode. Nit recognizing again. Anybody have suggestions? In recovery it also indicated it can not locate most of my files in read after I flash.. what am I doing wrong.
sgh-399n bootloop
It's taken me 2 months to cry for help. I'm not a complete noobie, but I'm completely exhausted. First of all, one morning I woke up and I thought that somehow my battery was dead. It wasn't. Eventually, I found it in a bootloop. This phone was working fine, running a "Tiger_Lilly" ROM the night before. I've tried everything using Odin, adb and fastboot (I'm not sure how to get the phone in fastboot mode and also, before using Odin, TWRP wouldn't mount/data.) I'm stumped. Would appreciate some help, thank you.
HELP...!!!
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Fidelacho16 said:
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Click to expand...
Click to collapse
What was you using prior to it bootlooping and what rom was installed have you modifed anything else such as partions etc...
also list your method and link rom your trying. just wondering if its the lastest version for device. while in odin also make sure Auto Reboot” and “F. Reset Time is only selected and what version of odin are you using?
If your unable to flash any rom thru odin then there must be a major problem else where until we can narrow it down no one can assist you.
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Fidelacho16 said:
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Click to expand...
Click to collapse
Ok try this version of odin 3.0.7 which i added as attachment also i linked my firmware OH3 as you stated your device is t399n i know sammobile takes long to download so this may be faster for you Link HERE
as stated previously make sure only thing selected is Auto Reboot” and “F. Reset Time and add tar file into PDA.
I await your reply if fails i send you adb fastboot etc may be able to grab some logs see whats happening

Categories

Resources