Bephone I7100 Firmware Needed - Android Q&A, Help & Troubleshooting

Hello!
Min Ga La Par(Burmese greeting). My Phone
Bephone I7100
Android 4.0.3
Baseband MTK 6517
Kernel 2.6.35.7
Software W2.20P_20
Hardware 2.1.0
My phone stop at Android Logo.Because of I rooted this device that changed Boot.img.
Please help me for firmware.

Great? , I don't how to say about this phone.
Kyawzin Tun said:
Hello!
Min Ga La Par(Burmese greeting). My Phone
Bephone I7100
Android 4.0.3
Baseband MTK 6517
Kernel 2.6.35.7
Software W2.20P_20
Hardware 2.1.0
My phone stop at Android Logo.Because of I rooted this device that changed Boot.img.
Please help me for firmware.
Click to expand...
Click to collapse
i think you must send your phone to store.. you still have warranty?
sorry my BAD english

i7100
junior hello, you got lucky with the i7100 rom? I need help please.

i7100
you got lucky with the i7100 rom? [email protected]

boot
Kyawzin Tun said:
Hello!
Min Ga La Par(Burmese greeting). My Phone
Bephone I7100
Android 4.0.3
Baseband MTK 6517
Kernel 2.6.35.7
Software W2.20P_20
Hardware 2.1.0
My phone stop at Android Logo.Because of I rooted this device that changed Boot.img.
Please help me for firmware.
Click to expand...
Click to collapse
sir same problem
my phone cherry mobile
stop to the logo
but not install img.
so im go to service center
afterdat ok
---------- Post added at 08:39 PM ---------- Previous post was at 08:34 PM ----------
saels said:
sir same problem
my phone cherry mobile
stop to the logo
but not install img.
so im go to service center
afterdat ok
Click to expand...
Click to collapse
sir
try to the watch
yotube channel
to resolve your problem
youtube is the best
school to all begenner
tnx
---------- Post added at 08:47 PM ---------- Previous post was at 08:39 PM ----------
saels said:
sir same problem
my phone cherry mobile
stop to the logo
but not install img.
so im go to service center
afterdat ok
---------- Post added at 08:39 PM ---------- Previous post was at 08:34 PM ----------
sir
try to the watch
yotube channel
to resolve your problem
youtube is the best
school to all begenner
tnx
Click to expand...
Click to collapse
hope
your
promleb solving
athers
master
hehehehe
---------- Post added at 08:53 PM ---------- Previous post was at 08:47 PM ----------
saels said:
sir same problem
my phone cherry mobile
stop to the logo
but not install img.
so im go to service center
afterdat ok
---------- Post added at 08:39 PM ---------- Previous post was at 08:34 PM ----------
sir
try to the watch
yotube channel
to resolve your problem
youtube is the best
school to all begenner
tnx
---------- Post added at 08:47 PM ---------- Previous post was at 08:39 PM ----------
hope
your
promleb solving
athers
master
hehehehe
Click to expand...
Click to collapse
sorry for bad english
righ goto service center
now
---------- Post added at 08:58 PM ---------- Previous post was at 08:53 PM ----------
i sad too your problem
master
---------- Post added at 09:03 PM ---------- Previous post was at 08:58 PM ----------
bos go to
youtube
im sure
your
promlem s solve
---------- Post added at 09:09 PM ---------- Previous post was at 09:03 PM ----------
tnx
to
---------- Post added at 09:13 PM ---------- Previous post was at 09:09 PM ----------
enmajvn said:
you got lucky with the i7100 rom? [email protected]
Click to expand...
Click to collapse
help how to inceases my 512 ram

Related

[Q] help me how to root

how to root my phone?
firmware :2.3.5
baseband : I9001DXKJ1
kernel :2.6.35.7-perf [email protected]#1
Build :GINGERBREAD.DXKJ2
please..help me...i'm new here...
Do u mean you own a Samsung Galaxy S Plus?
Cuz we kinda dont know what phone u use!!!!!!!!
---------- Post added at 09:15 PM ---------- Previous post was at 09:10 PM ----------
You will find the details in this link. If you still have any doubts, you may ask.
http://forum.xda-developers.com/showthread.php?t=1253707
---------- Post added at 09:18 PM ---------- Previous post was at 09:15 PM ----------
After rooting there should be an app named SuperUser in your App Drawer! If the app is there, it means you were successful!
That will do the trick, or you can try SuperOneClick. For future reference you can check out the wiki! The link is in my signature (the link is the phone name btw).

[Q] Any rom for Samsung Galaxy Win Pro (SM-G3812)?

As stated in title, can't find any rom for this china only phone yet on the web. Any help?
limcs79 said:
As stated in title, can't find any rom for this china only phone yet on the web. Any help?
Click to expand...
Click to collapse
I have this phone too! I have found a one click Root but No English Roms yet I hope this device gains popularity and people will start porting over ROMs
Sent from my SM-G3812 using Tapatalk
I have this phone too but no one released a custom recovery rom for it:crying::crying::crying::crying::crying::crying::crying:
has anyone got an english ROM yet for this?
I tried KINGO ROOT it worked fine to root Win Pro G3812
---------- Post added at 03:42 PM ---------- Previous post was at 03:38 PM ----------
The roms are here http://www.romzj.com/list/samsung_g3812.htm but they are all modded 4.2.2
---------- Post added at 04:19 PM ---------- Previous post was at 03:42 PM ----------
You can find the recovery in http://rom.7to.cn/jiaochengdetail/5206 the link to download is http://pan.baidu.com/s/1gd1vLSn
---------- Post added at 04:43 PM ---------- Previous post was at 04:19 PM ----------
qitushuaji_setup_official.exe this is a sharm tool to install recovery too but I can't traslate from chinise:crying:

[Q] cm 11 installation prblm

i need help all masterszz
i can't install cm 11 on my chD
itz error inztallation abrted like smthng
plz help any guide plz fast
HELP..!!!!!
sorry for bad english.
m a newbie thats y havent used dev section
Hey everyone broz here
---------- Post added at 12:23 PM ---------- Previous post was at 12:22 PM ----------
Well..i also changed mobile purchased chd
---------- Post added at 12:26 PM ---------- Previous post was at 12:23 PM ----------
Bro update ur revovery to latest one by @kashifmin sir
6.0.4.8
Follow instructions carefully
I also got prblm but @saksham.singh48 sir helped me a lot
N now follow his great guide here
No prblm will come
For all guys facing the cm installation prblms folliw this guide.
http://droidyard.blogspot.in/2014/06/how-to-install-kitkat-cyanogenmod-11-on.html
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
Sorry for my bad english 2oo.

Guys pls help me

I want to make a android m based ROM for my micromax canvas spark pls help me????:crying:
why did yo want to make now
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
if you develop for mx it maybe not fit for hardware
parkerwilliam713 said:
why did yo want to make now
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
if you develop for mx it maybe not fit for hardware
Click to expand...
Click to collapse
Yup, I'm with you.

Compiling AOSP 7.1.1 for vivaltods5m

So, I tried to build AOSP 7.1.1, after sync-ing r13 branch I cloned @Nikiz Kernel & @itigr aosp-5.1 branch and used @no_name device tree
as a reference to update itigr's aosp-5.1 tree.
First, I compiled the kernel with this defconfig and moved zimage to device tree, renamed it to kernel also moved Hawaii_ss_vivaltods5m_rev00.dtb to device tree and used BOARD_MKBOOTIMG_ARGS := --second device/samsung/vivaltods5m/hawaii_ss_vivaltods5m_rev00.dtb, Compiling finished successfully then I flashed the output. .zip with @Jimm85 recovery but when I rebooted device screen stayed blank [turned off] and didn't show the bootanimation, probably an init problem but I can't debug it at that state
So, I'm here to ask for help
btw,I didn't apply any patches to the source
Thanks bro for working on vivaltods5m(ACE 4 SM-G313HU) and vivaltonfc3g(SM-G313HN). Hope someone will help u fix bootloop.
---------- Post added at 06:28 PM ---------- Previous post was at 06:27 PM ----------
Bro,if need something test, call me.
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Bro i think u need use patches from s duos 2
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
see compatbility patches at https://forum.xda-developers.com/s7582/development/rom-aosp-7-0-galaxy-s-duos-2-trend-plus-t3472072
Kristaps(Lv) said:
Thanks bro for working on vivaltods5m(ACE 4 SM-G313HU) and vivaltonfc3g(SM-G313HN). Hope someone will help u fix bootloop.
---------- Post added at 06:28 PM ---------- Previous post was at 06:27 PM ----------
Bro,if need something test, call me.
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Bro i think u need use patches from s duos 2
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
see compatbility patches at https://forum.xda-developers.com/s7582/development/rom-aosp-7-0-galaxy-s-duos-2-trend-plus-t3472072
Click to expand...
Click to collapse
Thanks, I'll take a look
Edit 01: I think kernel isn't booting up either
gonna try to build AOSP 5.1 first next month
help !
@doesntexits any ideas?
May ramdisk is problem
thats way phone stuck at sm-g313hu
Sent from my GT-S5312 using XDA-Developers Legacy app
Any news ?
Kristaps(Lv) said:
Any news ?
Click to expand...
Click to collapse
I have to wait till February 10th to download the sources as my monthly 150 GB internet quota is over :crying:
Didn't you notice that I live in Egypt
I used to pay 140 EGP (~20 USD 5 monthes ago, ~ 16 USD 3 monthes ago, now ~7.5 USD :crying: RIP EGP :crying: ) for a 2Mb/s ADSL connection
Oh :/
Sent from my GT-S5312 using XDA-Developers Legacy app
I installed on VM Ubuntu. Then i synced toolchains and kernel then i initialized same deconfig which u initialized. After initializing i writed make -j3. Kernel compiled successfully but when i flashed it, it stuck on black screen. :/
---------- Post added at 07:23 PM ---------- Previous post was at 07:19 PM ----------
But some time ago.. i was compiled working kernel(which worked on cm11) using stock kernel source: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-G313HN
---------- Post added at 07:25 PM ---------- Previous post was at 07:23 PM ----------
U thinking why i'm not trying build roms for vivaltonfc3g and vivaltods5m ri8 ? I'm not trying to build bcz my net too is s.it. :/ And i'm noob at rom building and error fixing..
Bro try upload ur built Aosp 7.1. Then i will can experiment with it. May I will make it boot
Kristaps(Lv) said:
Bro try upload ur built Aosp 7.1. Then i will can experiment with it. May I will make it boot
Click to expand...
Click to collapse
Unfortunately I deleted the whole Linux partition :silly:
gonna try once again next month
Kristaps(Lv) said:
I installed on VM Ubuntu. Then i synced toolchains and kernel then i initialized same deconfig which u initialized. After initializing i writed make -j3. Kernel compiled successfully but when i flashed it, it stuck on black screen. :/
---------- Post added at 07:23 PM ---------- Previous post was at 07:19 PM ----------
But some time ago.. i was compiled working kernel(which worked on cm11) using stock kernel source: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=SM-G313HN
---------- Post added at 07:25 PM ---------- Previous post was at 07:23 PM ----------
U thinking why i'm not trying build roms for vivaltonfc3g and vivaltods5m ri8 ? I'm not trying to build bcz my net too is s.it. :/ And i'm noob at rom building and error fixing..
Click to expand...
Click to collapse
I'll try to compile Aosp 5.1 first, with this prebuilt kernel image device should boot
also I'll try to get this book to learn debugging with emulator ( I'm also a noob , but with trial we will learn & one day we'll get a booting rom )
Oh.
---------- Post added at 02:58 PM ---------- Previous post was at 02:58 PM ----------
Okay,bro.
---------- Post added at 02:59 PM ---------- Previous post was at 02:58 PM ----------
Hope That one day we got booting rom
---------- Post added at 03:01 PM ---------- Previous post was at 02:59 PM ----------
I'm on AOSP 5.1.1 (which has made by Itirg) I will try build kernel from nikiz... and then add cpu overclock up to 1,3 ghz or 1,6ghz.
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
Cuz our phone with gapps is very slowly and laggy.
---------- Post added at 03:10 PM ---------- Previous post was at 03:02 PM ----------
Hope when will be added overclocking up to 1,3ghz or 1,6ghz lags will be gone.
Kristaps(Lv) said:
Oh.
---------- Post added at 02:58 PM ---------- Previous post was at 02:58 PM ----------
Okay,bro.
---------- Post added at 02:59 PM ---------- Previous post was at 02:58 PM ----------
Hope That one day we got booting rom
---------- Post added at 03:01 PM ---------- Previous post was at 02:59 PM ----------
I'm on AOSP 5.1.1 (which has made by Itirg) I will try build kernel from nikiz... and then add cpu overclock up to 1,3 ghz or 1,6ghz.
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
Cuz our phone with gapps is very slowly and laggy.
---------- Post added at 03:10 PM ---------- Previous post was at 03:02 PM ----------
Hope when will be added overclocking up to 1,3ghz or 1,6ghz lags will be gone.
Click to expand...
Click to collapse
Itigir's 5.1 or CM 12.1 has lots of bugs already
overclocking kernel won't help
Oh
Sent from my GT-S5312 using XDA-Developers Legacy app
I added overclocking up to 1,7 ghz. Now phone with gapps is faster and not lags.
Kristaps(Lv) said:
I added overclocking up to 1,7 ghz. Now phone with gapps is faster and not lags.
Click to expand...
Click to collapse
Stock kernel?
Nope.
Sent from my GT-S5312 using XDA-Developers Legacy app
---------- Post added at 09:48 PM ---------- Previous post was at 09:46 PM ----------
I overclocked theNikiz kernel ..
Sent from my GT-S5312 using XDA-Developers Legacy app
Kristaps(Lv) said:
Nope.
Sent from my GT-S5312 using XDA-Developers Legacy app
---------- Post added at 09:48 PM ---------- Previous post was at 09:46 PM ----------
I overclocked theNikiz kernel ..
Sent from my GT-S5312 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Is it working with 5.1 ?
And is it stable, no random reboots, freezes , etc?
Syncing Aosp 5.1.1 r38
It will take 2 days at least

Categories

Resources