Does anyone know how to enable the navbar on the new AOKP and CM 10.2 roms? I've tried adding qemu.he.mainkeys=0 at the end of the build.prop, saved, and rebooted, but had no luck. Personally I enjoy the software keys over the capacitive. I'm running CM 10.2 if that helps.
bokilenator said:
Does anyone know how to enable the navbar on the new AOKP and CM 10.2 roms? I've tried adding qemu.he.mainkeys=0 at the end of the build.prop, saved, and rebooted, but had no luck. Personally I enjoy the software keys over the capacitive. I'm running CM 10.2 if that helps.
Click to expand...
Click to collapse
Where did you find a 4.3 AOKP rom for this phone?
OMGMatrix said:
Where did you find a 4.3 AOKP rom for this phone?
Click to expand...
Click to collapse
My bad. Meant AOSP.
http://forum.xda-developers.com/showthread.php?t=2381648
It hasn't been enabled yet, as far as I've been able to tell.
Maybe PM SnowLeapordJB or dvhexer?
OMGMatrix said:
It hasn't been enabled yet, as far as I've been able to tell.
Maybe PM SnowLeapordJB or dvhexer?
Click to expand...
Click to collapse
I pm'd dvhexer. Will update if he answers.
Related
I am curious why here on xda is not much about this great rom?
http://goo.im/devs/liquidsmooth/umts_spyder
i am using it since few days, it is smooth as in name, battery is ok, usb connection works, it is kexec...and after you install more locale 2 is almost in your language...
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
http://goo.im/devs/liquidsmooth/umts_spyder/Liquid-JB-v2.1-STABLE-umts_spyder.zip
Im going to try this too.
Can i flash it via SS3.11?
what's the base? cm10 aokp etc. ?
will it work @bmm
There is no need to enable USB debugging even if titanium ask for that .it works without enabling since gingerbread. you can switch off the message inside titanium setting.however USB debugging is inside developer settings menu.this ROM is old.that's why it's not listed here
xtam said:
I am curious why here on xda is not much about this great rom?
http://goo.im/devs/liquidsmooth/umts_spyder
i am using it since few days, it is smooth as in name, battery is ok, usb connection works, it is kexec...and after you install more locale 2 is almost in your language...
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
http://goo.im/devs/liquidsmooth/umts_spyder/Liquid-JB-v2.1-STABLE-umts_spyder.zip
Click to expand...
Click to collapse
Are you sure it's kexec? I've been using the liquidsmooth from crackflasher's nightlies, that one runs on the ICS kernel. absolutely love the rom and it's stability
xtam said:
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
Click to expand...
Click to collapse
You can enable USB debugging tapping 4 or 5 times (don't remember exactly) over Compilation Number at Phone Info Settings. You will get a notice adverting you about it...
davtse said:
Are you sure it's kexec? I've been using the liquidsmooth from crackflasher's nightlies, that one runs on the ICS kernel. absolutely love the rom and it's stability
Click to expand...
Click to collapse
Yeah, it's Kexec i'm sure... I have seen it on the zip
This rom is not old, it is from 15 mar 2013
Base is probably some cm
Kernel is kexec, you can flash it having already installed any other kernel
In bmm 0.3.4 just enable kexec, i have it on slot_3
kernel inside this rom is 3.0.31 by dhacker29
it can be connected to usb pc and there is no reboot.
davtse said:
Are you sure it's kexec? I've been using the liquidsmooth from crackflasher's nightlies, that one runs on the ICS kernel. absolutely love the rom and it's stability
Click to expand...
Click to collapse
yes, it is kexec, after downloading you can see it in folder /system/etc/kexec
xtam said:
yes, it is kexec, after downloading you can see it in folder /system/etc/kexec
Click to expand...
Click to collapse
hmm tried it for just abit on system 2 of bmm, it's seems pretty stable, but i think i will stick with the non-kexec version for the time being. works better with motomizer for underclocking/undervolting
http://sts-dev-team.crackflasher.com/nightlies/umts_spyder/liquidsmooth/
It's not based on CM or AOKP, Liquid Smooth uses their own source.
Just installed it in Slot_2 using BMM and works like a charm! Smooth, fast and a lot of customization options. Really I love it!!
I hope they can add Spanish language because with morelocale is not enough to get everything in spanish.
Thanks for this!!
shobon said:
It's not based on CM or AOKP, Liquid Smooth uses their own source.
Click to expand...
Click to collapse
are there any other roms based on new kexec kernel, which also uses own sources, not aokp or cm ?
xtam said:
are there any other roms based on new kexec kernel, which also uses own sources, not aokp or cm ?
Click to expand...
Click to collapse
I think Dtrail is trying to come up with one, but i think the current batches are all based on whatever source Hashcode and Dhacker have released so far. Maybe some time in the future..
What about bugs?
xtam said:
I am curious why here on xda is not much about this great rom?
http://goo.im/devs/liquidsmooth/umts_spyder
i am using it since few days, it is smooth as in name, battery is ok, usb connection works, it is kexec...and after you install more locale 2 is almost in your language...
only problem i have is - i dont see how to enable usb debugging as titanium backup asks me to do it...
if soemone know, please write here, because on settings-apps there are only apps...
http://goo.im/devs/liquidsmooth/umts_spyder/Liquid-JB-v2.1-STABLE-umts_spyder.zip
Click to expand...
Click to collapse
I tried doing a search on Google but couldn't find much information of it unfortunately , From what I can tell, it seems to be on 4.2.2 but I guess we all need a tad bit of instructions :laugh:
Edit;
E.g. Information such as bugs, working h/w composer etc.
GSM? or does umts spyder already suggest that it's for gsm
QUICK QUESTION!
Are there any pre-requisites for installing this rom? Currently running Jbx 1.0
All are based on aosp so in every rom you will have same bugs. Don't know if camera flash will ever be fixed..
Sent from my XT910 using Tapatalk 2
Hello, where to find more on this? I mean, specs, screenshot, etc
Looks interesting, I will try this asap
Sisqo said:
All are based on aosp so in every rom you will have same bugs. Don't know if camera flash will ever be fixed..
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Hmm.. I've been using Jbx 1.0 and camera flash seems to be working fine
Sisqo said:
All are based on aosp so in every rom you will have same bugs. Don't know if camera flash will ever be fixed..
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
dhacker29 told on twitter that hashcode0f is working on it and probably will be later, in kernel 3.0.68 should be hdmi
https://twitter.com/dhacker29/status/313566333612736512
and they are working on camera:
https://twitter.com/Hashcode0f/status/312265780156833793
justcookiesncream said:
Hmm.. I've been using Jbx 1.0 and camera flash seems to be working fine
Click to expand...
Click to collapse
jbx is based on the stock 4.1 rom if i'm not mistaken, the roms that have issues with camera flash are the ones that are cm/aokp/liquidsmooth based roms, which are 4.2 and above.
So i successfully rooted my phone using odin and cwm recovery. i am on stock rom 4.1.2.
Can anyone please refer to a rom anyone used on this phone and it worked without many bugs.
i searched for cm11 but it still has many bugs on this phone so i ignored it. Please refer to me roms that have a newer version on android only. I dont want customised stock roms. just omniroms or maybe cm10.2. Thanks everyone!:laugh:
AKANFatality said:
So i successfully rooted my phone using odin and cwm recovery. i am on stock rom 4.1.2.
Can anyone please refer to a rom anyone used on this phone and it worked without many bugs.
i searched for cm11 but it still has many bugs on this phone so i ignored it. Please refer to me roms that have a newer version on android only. I dont want customised stock roms. just omniroms or maybe cm10.2. Thanks everyone!:laugh:
Click to expand...
Click to collapse
presently der are no cm or omni roms... but u can go for jasp hd or s4thewin roms.. dey are really good.. speaking abt cm 10.2, i myself am trying to build it and if everything goes as planned, Great!!
Bionic Monkey
Shrukul said:
presently der are no cm or omni roms... but u can go for jasp hd or s4thewin roms.. dey are really good.. speaking abt cm 10.2, i myself am trying to build it and if everything goes as planned, Great!!
Click to expand...
Click to collapse
Well I found one. Its called the bionic monkey. Its based on cyanogenmod i guess. Built especially for our device. :laugh: with the Kitkat 4.4
AKANFatality said:
Well I found one. Its called the bionic monkey. Its based on cyanogenmod i guess. Built especially for our device. :laugh: with the Kitkat 4.4
Click to expand...
Click to collapse
Interesting. Nice find, I didn't know this one. I will test to see if it's really KitKat :good:
Edit: it is a beautiful ROM, but it isn't KitKat. It's the same Android JB we all have in our devices. I'm considering to keep it installed.
It is for i8552B
freitaz said:
Interesting. Nice find, I didn't know this one. I will test to see if it's really KitKat :good:
Edit: it is a beautiful ROM, but it isn't KitKat. It's the same Android JB we all have in our devices. I'm considering to keep it installed.
Click to expand...
Click to collapse
@freitaz Did you flash that in i8552? What's your review on it.
mysteryno46 said:
@freitaz Did you flash that in i8552? What's your review on it.
Click to expand...
Click to collapse
well its nice, much lighter than the original stock rom. Plus its better and much sleeker than the touchwiz. Although its not a major upgrade like cyanogenmod. But yeah, worth more than the stock rom. One of the cleanest rom for grand quattro :good:
mysteryno46 said:
@freitaz Did you flash that in i8552? What's your review on it.
Click to expand...
Click to collapse
Yes, I tested. Let me write a little review.
I would say Bionic Monkey (the name of the rom) is a stock-based rom, with some interesting mods. By default the rom changes the DPI, so more things fit on screen. Some apps are KitKat-themed, like contacts or dialer. The stock launcher was replaced by Google Experience Launcher. It's also pre-rooted and has support to multiwindow. I didn't test multiwindow, but I think it's nice on that rom because of DPI.
The major disadvantage is that the rom is not KitKat, despite the system info. You can test it by installing any app only for KitKat - it will refuse to install.
So, in general, it's a good rom for daily use, so you might give it a try.
freitaz said:
Yes, I tested. Let me write a little review.
I would say Bionic Monkey (the name of the rom) is a stock-based rom, with some interesting mods. By default the rom changes the DPI, so more things fit on screen. Some apps are KitKat-themed, like contacts or dialer. The stock launcher was replaced by Google Experience Launcher. It's also pre-rooted and has support to multiwindow. I didn't test multiwindow, but I think it's nice on that rom because of DPI.
The major disadvantage is that the rom is not KitKat, despite the system info. You can test it by installing any app only for KitKat - it will refuse to install.
So, in general, it's a good rom for daily use, so you might give it a try.
Click to expand...
Click to collapse
do u have a kitkat rom in sight for this phone? (stable enough)
update: did u try this one? http://forum.xda-developers.com/grand-quattro/orig-development/dev-cyanogenmod-11-0-t2802701
AKANFatality said:
do u have a kitkat rom in sight for this phone? (stable enough)
update: did u try this one? http://forum.xda-developers.com/grand-quattro/orig-development/dev-cyanogenmod-11-0-t2802701
Click to expand...
Click to collapse
There's no KK for us, at least for now. All the roms that claim to be any Android higher than 4.1.2 are actually themed roms with mods on build.prop, but in fact they are Android 4.1.2.
The exception is CM (the one in link provided by you), that is KK in fact. But is still unstable and not suited for daily use.
freitaz said:
There's no KK for us, at least for now. All the roms that claim to be any Android higher than 4.1.2 are actually themed roms with mods on build.prop, but in fact they are Android 4.1.2.
The exception is CM (the one in link provided by you), that is KK in fact. But is still unstable and not suited for daily use.
Click to expand...
Click to collapse
what about cm 10.2?
AKANFatality said:
what about cm 10.2?
Click to expand...
Click to collapse
Also unstable, as far as I know
Same as CM11
AKANFatality said:
what about cm 10.2?
Click to expand...
Click to collapse
CM 10.2 is at the same stage as CM11. Not fully functional. No network detected.
Is there any vanilla android lollipop ROMS for Sprint LG G3? I am running CM12 Unofficial right now and each new update it gets further and further away from vanilla.
CM12 2/3 build is as close to vanilla as you'll get without sacrificing features. I am between barRin and cm12 atm. Still waiting for the official release to come.
asacado said:
CM12 2/3 build is as close to vanilla as you'll get without sacrificing features. I am between barRin and cm12 atm. Still waiting for the official release to come.[/QUOTE
How do I explain this without sounding stupid.
1. On a fresh install I liked the Google phone setup than the CM12 phone setup where it gave me options to restore from a particular time. It would then go on to restore my settings and apps as they were on the previous ROM. As the more current builds seem to have removed that feature. I am not really worried about other features of CM12. Is barRin a derivative of CM12 or is it something else?
Click to expand...
Click to collapse
Netstalker2009 said:
asacado said:
CM12 2/3 build is as close to vanilla as you'll get without sacrificing features. I am between barRin and cm12 atm. Still waiting for the official release to come.[/QUOTE
How do I explain this without sounding stupid.
1. On a fresh install I liked the Google phone setup than the CM12 phone setup where it gave me options to restore from a particular time. It would then go on to restore my settings and apps as they were on the previous ROM. As the more current builds seem to have removed that feature. I am not really worried about other features of CM12. Is barRin a derivative of CM12 or is it something else?
Click to expand...
Click to collapse
BarRin is a stock based ROM. CM12 is an AOSP based ROM.
Click to expand...
Click to collapse
Netstalker2009 said:
asacado said:
CM12 2/3 build is as close to vanilla as you'll get without sacrificing features. I am between barRin and cm12 atm. Still waiting for the official release to come.[/QUOTE
How do I explain this without sounding stupid.
1. On a fresh install I liked the Google phone setup than the CM12 phone setup where it gave me options to restore from a particular time. It would then go on to restore my settings and apps as they were on the previous ROM. As the more current builds seem to have removed that feature. I am not really worried about other features of CM12. Is barRin a derivative of CM12 or is it something else?
Click to expand...
Click to collapse
BarRin is based on stock. CM12 is AOSP
Click to expand...
Click to collapse
Pump Ac7i0n said:
Netstalker2009 said:
BarRin is based on stock. CM12 is AOSP
Click to expand...
Click to collapse
And if it isn't clear, BarRin is KitKat, CM12 is lollipop.
Click to expand...
Click to collapse
Stock Lollipop
meyerweb said:
Pump Ac7i0n said:
And if it isn't clear, BarRin is KitKat, CM12 is lollipop.
Click to expand...
Click to collapse
I was referring more to stock lollipop, like what you would get on a Nexus 6 rather than stock LG.
Click to expand...
Click to collapse
Hello guys, I am new and I don't know much info about phones etc. I own an LG L7 P710 and i have 4.1.2 android version but it lags so much even I have unistall "huge" apps and I have dones factory resets. So I would like to find a custom rom! But I don't know anything about these things So I would like to tell me what's the best rom for P710 is right now. If I have to post any further info of my info tell me! Sorry for my english and thanks for your time!
Cheers,
pronoobgr
If you want a Jellybean based Custom Rom, you could try Cyanogenmod 10.2 by neutrondev, its the most stable rom of all at the moment.
If you want a KitKat based Custom Rom, you could try Cyanogemod 11 or Mokee OS, but these are rather laggy due to missing gpu drivers and at the newest version of Cyanogenmod 11 the LED doesn't work.
As I said, Cyanogenmod 10.2 is the most stable so you should try this one first.
TheBesterTester said:
If you want a Jellybean based Custom Rom, you could try Cyanogenmod 10.2 by neutrondev, its the most stable rom of all at the moment.
If you want a KitKat based Custom Rom, you could try Cyanogemod 11 or Mokee OS, but these are rather laggy due to missing gpu drivers and at the newest version of Cyanogenmod 11 the LED doesn't work.
As I said, Cyanogenmod 10.2 is the most stable so you should try this one first.
Click to expand...
Click to collapse
with this kernel that skyinfo created cm11 led works and there is huge improvement in overall perfomance..
http://www.mediafire.com/download/ywqkf96d2q4rt9v/kenrel_test2-p710.zip
cm 10.2 is great but it has problems with battery draining till now.lets hope the neutrondev will fix it.
manosper said:
with this kernel that skyinfo created cm11 led works and there is huge improvement in overall perfomance..
http://www.mediafire.com/download/ywqkf96d2q4rt9v/kenrel_test2-p710.zip
cm 10.2 is great but it has problems with battery draining till now.lets hope the neutrondev will fix it.
Click to expand...
Click to collapse
Not skyinfo fixed the led. I did.
neutrondev said:
Not skyinfo fixed the led. I did.
Click to expand...
Click to collapse
sorry if i made mistake and thank you for fixing it.but i saw that kernel was posted by skyinfo and i supposed it was his work.
manosper said:
sorry if i made mistake and thank you for fixing it.but i saw that kernel was posted by skyinfo and i supposed it was his work.
Click to expand...
Click to collapse
Well skyinfo made the work for my cm10.2 and it is based on my cm10.2 kernel. . He just made the improvements in speed ^.^. Led is my work. No problem. BTW cm10.2 is miles smoother than cm11.
neutrondev said:
Well skyinfo made the work for my cm10.2 and it is based on my cm10.2 kernel. . He just made the improvements in speed ^.^. Led is my work. No problem. BTW cm10.2 is miles smoother than cm11.
Click to expand...
Click to collapse
yes cm 10.2 is miles faster and without lags but the battery draining is unfortunately annoying,but i have faith that you will be able to fix it eventually.....
manosper said:
yes cm 10.2 is miles faster and without lags but the battery draining is unfortunately annoying,but i have faith that you will be able to fix it eventually.....
Click to expand...
Click to collapse
Well performance costs battery the other portion is drained by wi-fi. Cm11 has also poor battery btw.
I am using cm 10.2 and until now, everything works perfectly! Thank you guys Keep that work!
pronoobgr said:
I am using cm 10.2 and until now, everything works perfectly! Thank you guys Keep that work!
Click to expand...
Click to collapse
Well ^.^ nice. I will continue to work on that I am the dev for cm10.2. There is some things left to do. Dev is not stopped yet.
neutrondev said:
Well ^.^ nice. I will continue to work on that I am the dev for cm10.2. There is some things left to do. Dev is not stopped yet.
Click to expand...
Click to collapse
Im glad to hear that Btw, is any way to install aps from playstore? ;p or no?
Or is any link with specific apps for cm 10.2 ??
Sorry for silly questions, I am newbie
pronoobgr said:
Im glad to hear that Btw, is any way to install aps from playstore? ;p or no?
Or is any link with specific apps for cm 10.2 ??
Sorry for silly questions, I am newbie
Click to expand...
Click to collapse
Tomorrow there will be another release. I made a mistake and gapps are crashing. Tomorrow uploading new version with some fixes and Gapps ^.^.
neutrondev said:
Tomorrow there will be another release. I made a mistake and gapps are crashing. Tomorrow uploading new version with some fixes and Gapps ^.^.
Click to expand...
Click to collapse
Ok then
purified stock 4.4.2
Hello guys! I was just wondering if someone could explain why Netflix doesn't like to work with AOSP Roms. I'm running a CM 12.1 nightly build on my galaxy note 2 (t0ltetmo) and Netflix just has never worked for me! Is it something to do with Netflix security or system libs or something? Thanks!
H4X0R46 said:
Hello guys! I was just wondering if someone could explain why Netflix doesn't like to work with AOSP Roms. I'm running a CM 12.1 nightly build on my galaxy note 2 (t0ltetmo) and Netflix just has never worked for me! Is it something to do with Netflix security or system libs or something? Thanks!
Click to expand...
Click to collapse
It's mist likely the changes cm made to the code. I run a rom based in aosp but not cm sources and it works fine for me.
zelendel said:
It's mist likely the changes cm made to the code. I run a rom based in aosp but not cm sources and it works fine for me.
Click to expand...
Click to collapse
So it must be something to do with CM specifically? Damn, sucks for me because no other ROMs support my device at the moment, lollipop came out and most ROM teams ditched my device! Haha