I'm not a newbie to messing with my phone, but I am confused about the recommendation for the latest CleanROM release. It says:
Recommend latest AT&T 1.26.502.15 Firmware for best results but other firmwares can be used.
Click to expand...
Click to collapse
The only thread I can find with that version (not just radios) is from Scott also, and it's just a rooted ROM. Which would be overwritten if I loaded CleanROM. So I searched for the difference between "ROM" and "Firmware" and in multiple places in this form it's said that ROMs are built on Firmware, and define the "Firmware" as Jelly Bean 4.2.2, etc. So CleanROM would be build on that Firmware ... and by flashing it I then have it. But that definition doesn't seem to fit with Scott's recommendation.
I'm completely confused.
Is this referring to a radio firmware?
What is the recommendation here, and how do I accomplish it??
I was wondering the same thing. I'm assuming it's best if you have software version .15, but you can also flash if you have .10 (like myself). I dl'ed the rom yesterday and am going to flash it today. By these instructions, flash .15, then flash CleanRom for best results?
In Flames said:
I was wondering the same thing. I'm assuming it's best if you have software version .15, but you can also flash if you have .10 (like myself). I dl'ed the rom yesterday and am going to flash it today. By these instructions, flash .15, then flash CleanRom for best results?
Click to expand...
Click to collapse
ROMs are like the operating system and software applications.
Firmware is like the computer bios or drivers.
When devs say ROM is based on firmware x.xx, it means the software is built on the expectation that the firmware the phone is running will match. This is usually for best performance.
Like in Windows or any other operating system, you can run outdated drivers/firmware, but you won't be fully optimized or have the latest fixes.
For example, the latest firmwares contain an updated touch panel driver that makes touch response and accuracy better.
When I was on stock ROM and stock firmware, touch panel response was hit or miss, especially the home button. Newer firmware fixed that problem.
Flashing firmware requires either exact CID/MID match if s-on, or super CID if s-off.
Also, newer firmwares have updated hboot that blocks the s-off exploit from working.
Firmwares typically include newer radios, newer hboot, newer touch panel drivers, and system partition updates. Not all firmwares will have new updates for each item each time.
Sent from my HTC One using xda app-developers app
nloding said:
I'm not a newbie to messing with my phone, but I am confused about the recommendation for the latest CleanROM release. It says:
The only thread I can find with that version (not just radios) is from Scott also, and it's just a rooted ROM. Which would be overwritten if I loaded CleanROM. So I searched for the difference between "ROM" and "Firmware" and in multiple places in this form it's said that ROMs are built on Firmware, and define the "Firmware" as Jelly Bean 4.2.2, etc. So CleanROM would be build on that Firmware ... and by flashing it I then have it. But that definition doesn't seem to fit with Scott's recommendation.
I'm completely confused.
Is this referring to a radio firmware?
What is the recommendation here, and how do I accomplish it??
Click to expand...
Click to collapse
In Flames said:
I was wondering the same thing. I'm assuming it's best if you have software version .15, but you can also flash if you have .10 (like myself). I dl'ed the rom yesterday and am going to flash it today. By these instructions, flash .15, then flash CleanRom for best results?
Click to expand...
Click to collapse
Here is the 1.26.502.15 AT&T firmware >> http://forum.xda-developers.com/showpost.php?p=44260480&postcount=95
Read the requirements for S-OFF and you'll be fine
clsA said:
Here is the 1.26.502.15 AT&T firmware >> http://forum.xda-developers.com/showpost.php?p=44260480&postcount=95
Read the requirements for S-OFF and you'll be fine
Click to expand...
Click to collapse
Flashing this should change the build number to 1.26.502.15? I just flashed and the build number is still 2.24 but the radio did change.
Where are you checking the build number at? From the bootloader?
If your checking from about /software/more/build it's wrong that's the rom version
Sent from my HTC One using Tapatalk 4
clsA said:
Where are you checking the build number at? From the bootloader?
If your checking from about /software/more/build it's wrong that's the rom version
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
I was checking it from the about section (guess it would help if i looked in the right spot). (Now to make me feel like a NOOB) Where on the bootloader is it located, I see hboot and radio but nothing concerning the build number, Im sure its probably staring me in the face:cyclops:
thenewone said:
I was checking it from the about section (guess it would help if i looked in the right spot). (Now to make me feel like a NOOB) Where on the bootloader is it located, I see hboot and radio but nothing concerning the build number, Im sure its probably staring me in the face:cyclops:
Click to expand...
Click to collapse
whoops thats my bad
you need to do fastboot getvar all from a command prompt
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4317mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.064s
Click to expand...
Click to collapse
clsA said:
whoops thats my bad
you need to do fastboot getvar all from a command prompt
Click to expand...
Click to collapse
it did flash! Thanks!:highfive:
Related
Hey Everyone, i am trying to get s-off on my phone but am unable to, i have tried many posts here at xda but i am having no success and would like for someone to help me please.
Be real specific about what you've done so far and the outcomes. Not saying that I can help much but anyone will need this information if they help you. Again specific details.
kenpachizero said:
Hey Everyone, i am trying to get s-off on my phone but am unable to, i have tried many posts here at xda but i am having no success and would like for someone to help me please.
Click to expand...
Click to collapse
Try the wire trick.
Depending on whether you're CDMA or GSM, it varies slightly.
Look it up.
Just note, you have to be running a stock ROM to do it.
DjDom said:
Try the wire trick.
Depending on whether you're CDMA or GSM, it varies slightly.
Look it up.
Just note, you have to be running a stock ROM to do it.
Click to expand...
Click to collapse
Exactly. I've done the wire trick on two different EVO 3D's, both brand new as of a few weeks ago and one from first release, and it worked perfect. Obtained S-OFF and started flashing ICS ROM's flawlessly. Search 'EVO 3D hboot 1.5 S-OFF wire trick' on Google or XDA.
Sent from my PG86100 using xda app-developers app
Delakit said:
Exactly. I've done the wire trick on two different EVO 3D's, both brand new as of a few weeks ago and one from first release, and it worked perfect. Obtained S-OFF and started flashing ICS ROM's flawlessly. Search 'EVO 3D hboot 1.5 S-OFF wire trick' on Google or XDA.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Well.. we can't be sure if he has a CDMA or GSM device and what HBoot he has.
So, just look it up on Google based on your device.
Hello, i have tried the following links to get s-off but have been unsuccessful, i have also tried the goldcard thing but that also did not work(i assume i did that wrong), links below:
http://forum.xda-developers.com/showthread.php?t=1247392
http://forum.xda-developers.com/showthread.php?t=1595157
http://forum.xda-developers.com/showthread.php?t=1262457
http://forum.xda-developers.com/showthread.php?t=1495657
http://forum.xda-developers.com/showthread.php?t=1535987
this is info about my phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.49.0013
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.23.862.4
(bootloader) serialno: HT18TV300927
(bootloader) imei: 357197040185624
(bootloader) product: shooter_u
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG8631000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 5751mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: a00907dc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
it is also unlocked and its a HTC EVO 3D GSM. Please tell me if you need any more information, thank you for helping
kenpachizero said:
Hello, i have tried the following links to get s-off but have been unsuccessful, i have also tried the goldcard thing but that also did not work(i assume i did that wrong), links below:
http://forum.xda-developers.com/showthread.php?t=1247392
http://forum.xda-developers.com/showthread.php?t=1595157
http://forum.xda-developers.com/showthread.php?t=1262457
http://forum.xda-developers.com/showthread.php?t=1495657
http://forum.xda-developers.com/showthread.php?t=1535987
this is info about my phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.49.0013
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.23.862.4
(bootloader) serialno: HT18TV300927
(bootloader) imei: 357197040185624
(bootloader) product: shooter_u
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG8631000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 5751mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: a00907dc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
it is also unlocked and its a HTC EVO 3D GSM. Please tell me if you need any more information, thank you for helping
Click to expand...
Click to collapse
Alright, boot to recovery, wipe all data and cache and then Flash this: http://forum.xda-developers.com/showthread.php?t=1318942
Once it's flashed, boot up into it and google for "HTC EVO 3D GSM WIRE TRICK" from your PC.
Do that and you'll be fine.
It's how I got S-OFF, took me 5 minutes.
DjDom said:
Alright, boot to recovery, wipe all data and cache and then Flash this: http://forum.xda-developers.com/showthread.php?t=1318942
Once it's flashed, boot up into it and google for "HTC EVO 3D GSM WIRE TRICK" from your PC.
Do that and you'll be fine.
It's how I got S-OFF, took me 5 minutes.
Click to expand...
Click to collapse
ok, i am doing it now
kenpachizero said:
ok, i am doing it now
Click to expand...
Click to collapse
Good luck! I hope it works.
It might take a few times to get the wire trick right, but it shouldn't be too hard.
Hi DjDom,
i download the (From the 1.20.401.2 RUU: 10.53.9020.00_10.13.9020.08_2 md5: ab817b2ee368c028a1725e7fe6a11b7a)
after i went to hboot as soon as it started parsing i stopped and returned to h boot, i did confirm the md5 before i tried, should i try a different one?
kenpachizero said:
Hi DjDom,
i download the (From the 1.20.401.2 RUU: 10.53.9020.00_10.13.9020.08_2 md5: ab817b2ee368c028a1725e7fe6a11b7a)
after i went to hboot as soon as it started parsing i stopped and returned to h boot, i did confirm the md5 before i tried, should i try a different one?
Click to expand...
Click to collapse
This should work perfectly.
Did you do a full wipe?
Try it again. Aha.
DjDom said:
This should work perfectly.
Did you do a full wipe?
Try it again. Aha.
Click to expand...
Click to collapse
Hey DjDom,
i wiped data and cache and tried again but got the same result.
kenpachizero said:
Hey DjDom,
i wiped data and cache and tried again but got the same result.
Click to expand...
Click to collapse
Alright, someone with the same issue managed to boot up by installing KingCobra ICS V1.2.
Try flashing that. If you're using 4EXT recovery, you shouldn't have a problem.
Otherwise, you'll need to manually flash the boot.img, which I'll attach here, since it's an older one.
Here is a link to the KingCobraICS thread.
Here is the link to download V1.2 of the ROM.
Here are the instructions to Manually flash the boot.img
Note: This is for V1.2 of King Cobra, not higher.
Also, rename it "boot.img"
DjDom said:
Alright, someone with the same issue managed to boot up by installing KingCobra ICS V1.2.
Try flashing that. If you're using 4EXT recovery, you shouldn't have a problem.
Otherwise, you'll need to manually flash the boot.img, which I'll attach here, since it's an older one.
Here is a link to the KingCobraICS thread.
Here is the link to download V1.2 of the ROM.
Here are the instructions to Manually flash the boot.img
Note: This is for V1.2 of King Cobra, not higher.
Also, rename it "boot.img"
Click to expand...
Click to collapse
Thanks, i am download 1.2 and will try
kenpachizero said:
Thanks, i am download 1.2 and will try
Click to expand...
Click to collapse
Tell me how it goes.
I'm just trying to get your phone to Boot at this point.
You should try Cool ICS as well. Great ROM. MeanROM ICS is my 2nd favorite. Post what you thought of the Kobra ROM. Maybe a screenshot or two.
Sent from my PG86100 using xda app-developers app
Delakit said:
You should try Cool ICS as well. Great ROM. MeanROM ICS is my 2nd favorite. Post what you thought of the Kobra ROM. Maybe a screenshot or two.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the input, but those are not GSM ROMs.
Those are CDMA.
If he flashes those, his phone will be bricked.
DjDom said:
Thanks for the input, but those are not GSM ROMs.
Those are CDMA.
If he flashes those, his phone will be bricked.
Click to expand...
Click to collapse
Lol, i'll avoid flashing those roms, but i am still download 1.2, out internet connection is very slow
DjDom said:
Thanks for the input, but those are not GSM ROMs.
Those are CDMA.
If he flashes those, his phone will be bricked.
Click to expand...
Click to collapse
YES, it booted, took awhile, what my next step Captain!
kenpachizero said:
YES, it booted, took awhile, what my next step Captain!
Click to expand...
Click to collapse
Alright, now you can either stay on that ROM or you can try flashing the stock GB ROM from before, again.
But before you do that, make a full nandroid backup in recovery of this ROM since you already know that it boots.
Hello all. I recently traded in my iphone 5 for an HTC one, and have been messing around with rooting, flashing, s-off, etc. I recently flashed a rooted gpe RUU running 4.3 (RUU-HTC_One_GE-3.06.1700.10_Rooted). The problem is, now I cant restore to the stock RUU. My information is below. When I run the command fastboot flash zip RUU.zip, I get the following error.
target reported max download size of 1526722560 bytes
sending 'zip' (1033210 KB)...
OKAY [ 34.677s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 34.936s
Any help would be greatly appreciated. Thanks!
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3263.15
version-cpld: None
version-microp: None
version-main: 3.06.1700.10
version-misc: PVT SHIP S-OFF
serialno: HT343W906150
imei: 354439054258605
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 3834mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-94cf81a8fd
hbootpreupdate: 11
gencheckpt: 0
I would also like to point out that I thought maybe the supercid was giving me issues. I tried to change cid back to stock (CWS_001) and it says invalid cid. Tried multiple times to ensure there was no typo and still no luck.
Sent from my HTC One using xda app-developers app
It's cws__001 not cws_001
Sent from my HTC One using Tapatalk 4
Changing to cid to stock did not help. Same error
Sent from my HTC One using xda app-developers app
Nevermind. Fixed it. Had to downgrade hboot to 1.44
Sent from my HTC One using xda app-developers app
Can you tell me how you did this? And point me to the files? I flashed the firmware and have the 3.06.1700.10 firmware, 1.54 hboot, and CleanROM 4.0.
I want to restore everything back to stock. I tried running RUU.exe and it failed. Can you point me to the files or help me out? (sorry - coming from an iphone 5 also)
FutureDocMD said:
Can you tell me how you did this? And point me to the files? I flashed the firmware and have the 3.06.1700.10 firmware, 1.54 hboot, and CleanROM 4.0.
I want to restore everything back to stock. I tried running RUU.exe and it failed. Can you point me to the files or help me out? (sorry - coming from an iphone 5 also)
Click to expand...
Click to collapse
If you have s-off, there are a few guides that will help you in the international forums of the htc one.
If you do not have s-off, its not really possible.... yet
S.Reno9 said:
If you have s-off, there are a few guides that will help you in the international forums of the htc one.
If you do not have s-off, its not really possible.... yet
Click to expand...
Click to collapse
Could you post a link to one? I've been trying to get my One back to stock for close to 8 hours now.
tlfd01 said:
Nevermind. Fixed it. Had to downgrade hboot to 1.44
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Which guide did you use? Can you post a step by step guide with links to the files please. Thanks.
Sent from my HTC One using xda app-developers app
humblehyper said:
Which guide did you use? Can you post a step by step guide with links to the files please. Thanks.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Like I mentioned above, I searched for hours and couldn't find a tutorial.
I finally just pulled HBOOT 1.44 from an RUU and flashed it through fastboot. Note that my One was S-Off and I had the Google Edition HBOOT 3.xx.
Here's HBOOT 1.44 that I used on my AT&T HTC One: https://www.dropbox.com/s/q5qntvr924lewul/firmware.zip
I believe the correct command is: fastboot flash zip firmware.zip
I'm trying to unroot my HTC one and would like to get some assistance.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4293mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
I downloaded a few RUUs and they all failed with the signature checking as shown below:
fastboot flash zip ruu.zip
sending 'zip' (1153504 KB)...
OKAY [ 51.070s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 191.002s
Any recommendation?
Thanks,
-Dave
Maybe your using the wrong Ruu. Do you have an ATT or international one? Or GE perhaps?
If your s-on you have to use an ruu that is specifically signed for your device not just any.
beamed from space.
similar problems
FanDroid09 said:
Maybe your using the wrong Ruu. Do you have an ATT or international one? Or GE perhaps?
If your s-on you have to use an ruu that is specifically signed for your device not just any.
beamed from space.
Click to expand...
Click to collapse
I'm having similar problems. How do you know if you are S-On? Sorry for the noob question, but I am used to the Samsung phones. This is a whole new world!
Your help is appreciated.
jpl81905 said:
I'm having similar problems. How do you know if you are S-On? Sorry for the noob question, but I am used to the Samsung phones. This is a whole new world!
Your help is appreciated.
Click to expand...
Click to collapse
Reboot to the bootloader. It says a couple lines down from the top
Sent from my HTC One using Tapatalk 4
FanDroid09 said:
Maybe your using the wrong Ruu. Do you have an ATT or international one? Or GE perhaps?
If your s-on you have to use an ruu that is specifically signed for your device not just any.
beamed from space.
Click to expand...
Click to collapse
I have an ATT baseband: 4A.14.3250.13
here is the files I downloaded:
RUU Zip M7_UL_JB43_50_Cingular_3.10.502.2.zip
RUU_M7_UL_JB43_SENSE50_M_rom.zip
I also tried the .exe
RUU_M7_UL_JB_50_Cingular_1.26.502.12
RUU_M7_UL_JB_50_Cingular
From htc1guru
:c
xcrazydx said:
Reboot to the bootloader. It says a couple lines down from the top
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
I'm S-On, but I don't know what firmware is appropriate for my phone, How do I find out which firmware to download? My phone is the unlocked/international version of the HTC One. This is my first android phone and I'm really worried that I can't unroot :S
IgniteTheWorld said:
I'm S-On, but I don't know what firmware is appropriate for my phone, How do I find out which firmware to download? My phone is the unlocked/international version of the HTC One. This is my first android phone and I'm really worried that I can't unroot :S
Click to expand...
Click to collapse
Then you would find the ruu in the HTC one forum, not here in the att forum.
It's not hard just do a little reading.
Sent from my HTC One using Tapatalk 4
htc one unroot problem
hi
i bought htc one internatioal somedays ago it was sense 5 but i coverted it into GE.
but now im trying to unroot and back to stock firmware now my phone is not showing the version and i dont know which ruu file i have to download for my phone
C:\fastboot>fastboot getvar version-main
version-main:
finished. total time: 0.000s
it is not showing the version.
please any one can help
[Q&A] [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended
Q&A for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wifi tethering problems
I was a long time on the v5 of the rom, now decided to update it to v20 and i love it so far. Did s-off and stuff, supercid and updated radio to correct version and flashed the rom. First audio didnt work so i flashed the zip of harman kardon sound v7 and all was good again. Sadly now i found out tethering goesnt work Like if there is not the right radio version wifi isnt working but the tetgering schould, doesn't it? Is tgere any way i can fix this? I tried a few root applications but they dont seem to work either...
Tethering may not be enabled in the actual rom,radio has nothing to do with it. sounds like mismatched firmware @wifi not working.
solidsniper3 said:
I was a long time on the v5 of the rom, now decided to update it to v20 and i love it so far. Did s-off and stuff, supercid and updated radio to correct version and flashed the rom. First audio didnt work so i flashed the zip of harman kardon sound v7 and all was good again. Sadly now i found out tethering goesnt work Like if there is not the right radio version wifi isnt working but the tetgering schould, doesn't it? Is tgere any way i can fix this? I tried a few root applications but they dont seem to work either...
Click to expand...
Click to collapse
So I have installed several sense rooms and there is a problem I'm running in to didn't know if it was just me or if others have experienced this as well haven't read anything on it,when on sense6 launcher everything works great but12 hrs or a day after the home button on the launcher becomes very laggy I mean super slow like you can see the animations slow,wondering if anyone else has encountered this problem and if they know a fix besides installing another launcher.
Sent from my HTC One_M8 using XDA Free mobile app
Any mods your using?
titaneds73 said:
So I have installed several sense rooms and there is a problem I'm running in to didn't know if it was just me or if others have experienced this as well haven't read anything on it,when on sense6 launcher everything works great but12 hrs or a day after the home button on the launcher becomes very laggy I mean super slow like you can see the animations slow,wondering if anyone else has encountered this problem and if they know a fix besides installing another launcher.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Any mods your using?
Click to expand...
Click to collapse
I've tried uninstalling all mods and not using any and the problem persists.on a side note if I use another launcher for awhile and go back to sense the lag goes away but after a couple of hrs it comes back.
Sent from my HTC One_M8 using XDA Free mobile app
Unsure on this one,ive experience no lag in rom I use..unsure whats going on with either your device or roms your using.Sorry couldnt be of more help on your issue. Does this happen on completely stock ruu software as well or just with custom roms?
Wonders_Never_Cease said:
Unsure on this one,ive experience no lag in rom I use..unsure whats going on with either your device or roms your using.Sorry couldnt be of more help on your issue. Does this happen on completely stock ruu software as well or just with custom roms?
Click to expand...
Click to collapse
I've read 3 reports like this (lag going back to home from app drawer) with the other 2 users I believe were on the stock Euro ROM. Not sure what the problem could be, as there are lots of users on this base and only a few reports of lag. But I haven't noticed it on your debloated DE ROM.
Will I be able to flash this rom running just Sense 6.0/4.4.2/S-Off/AT&T or are there any pre-reqs I need to do before attempting to flash?
I have AT&T with S-On. Should I revert back to ATT stock, update to the latest firmware and flash this Rom? I tried flashing the ROM without doing that and the wifi doesn't work. Thanks
luboss17 said:
I have AT&T with S-On. Should I revert back to ATT stock, update to the latest firmware and flash this Rom? I tried flashing the ROM without doing that and the wifi doesn't work. Thanks
Click to expand...
Click to collapse
Unfortunately v20 is 3.x base, and no such base yet exists officially from AT&T until they release Android 4.4.3 for our phone. So the only way to install compatible firmware is with s-off.
Similarly now that v27 is re-based to 4.16 software, you need corresponding 4.16 firmware, so the same goes (s-off required to update to the right firmware).
---------- Post added at 11:23 AM ---------- Previous post was at 11:22 AM ----------
rbeach21 said:
Will I be able to flash this rom running just Sense 6.0/4.4.2/S-Off/AT&T or are there any pre-reqs I need to do before attempting to flash?
Click to expand...
Click to collapse
Flash corresponding firmware (see my comments above).
redpoint73 said:
Unfortunately v20 is 3.x base, and no such base yet exists officially from AT&T until they release Android 4.4.3 for our phone. So the only way to install compatible firmware is with s-off.
Similarly now that v27 is re-based to 4.16 software, you need corresponding 4.16 firmware, so the same goes (s-off required to update to the right firmware).
---------- Post added at 11:23 AM ---------- Previous post was at 11:22 AM ----------
Flash corresponding firmware (see my comments above).
Click to expand...
Click to collapse
Thank you for your quick response. After getting home last night from work I did a quick search and found out the same thing you mentioned: AT&T won't push out firmware update.
I will just stick with Skydragon GPE v3.0.1 I have been using for a month now (it was a life saver btw, for some reason my stock Sense was lagging and slowing down like crazy)
skydragon +sense
I just installed the new Rom m8-v28.0 4.16.1540.8 on my at&t HTC one m8
With s off super cid and now cannot play any video or YouTube any video file related
App it just forcloses even online streaming videos how can I fix this I really love this Rom and Don't want to go back to android revolution hd
Firmware Link
I'm not seeing a link to the firmware anywhere. Where can I find it?
i flash latest rom
hi mr dragonesdenano i just flashed the latest [ROM][22-1]SD v 31 on my htc one m8
which is on metro pcs network but now i only get 3g not lte as before on SkyDragon+M8+Sense_v28+Lollipop
what can i do to fix this little problem i already check my apn settings you think this happen because is the international version?
thanks for you amazing rom
drewc830 said:
I'm not seeing a link to the firmware anywhere. Where can I find it?
Click to expand...
Click to collapse
Post #3 of the D thread, right below the ROM download links:
http://forum.xda-developers.com/showpost.php?p=51493750&postcount=3
---------- Post added at 03:38 PM ---------- Previous post was at 03:37 PM ----------
Caguayote said:
hi mr dragonesdenano i just flashed the latest [ROM][22-1]SD v 31 on my htc one m8
which is on metro pcs network but now i only get 3g not lte as before on SkyDragon+M8+Sense_v28+Lollipop
what can i do to fix this little problem i already check my apn settings you think this happen because is the international version?
thanks for you amazing rom
Click to expand...
Click to collapse
Did you update firmware?
no lte only 4g
My firmware is 4.16.1540..8
And i allready bought one of the strsight talk sim cards
To try it out i suppost to get 4g lte on my area but the same thing
Happen only 4g and 3g that's why my question thanks
The firmware fails to install for me with a "FAILED (remote: 24 parsing android-info fail)" error. I'm running the ATT 4.4.2 1.58.502.1 firmware, but with TWRP 2.8.1.0, rooted, unlocked, superCID, and S-OFF.
Here's my getvar info if that helps to troubleshoot:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA4C3WM01637
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I would try a newer version of TWRP, but none is available that works with ATT's stock HBOOT 3.1.6. Thanks in advance for any help!
EDIT 2012-01-27: After getting the OTA (installing it w/ stock recovery), I still was unable to flash this firmware. Instead I flashed the Euro firmware mentioned here, which did install for me. After that, I was able to install the ROM without any issues, and it seems like the radios are working correctly. Yay!
Since this was probably a very stupid thing to do, I'm going to attempt to install the US lollipop radio from this thread.
EDIT2: That worked, and everything appears to be peachy!
Upgraded apps un-upgrading
I'm still on v 31.0 WWE International version, might try to upgrade tonight to 33.0.
Every reboot certain apps (only 3 right now,) get downgraded to the version that came in the ROM. They are:
Dropbox: Downgrades to 2.4.7.14 (currently 2.4.7.18 in Google Play Store)
GMaps: 9.2.0 (currently 9.3.0)
Youtube: 6.0.13 (10.02.3)
Is this a known bug, or did I screw something up in the installation?
Thanks!
p.s. When I attempt to upgrade to v 33.0, can I do a dirty flash and keep my app data, or is it better to clean wipe?
Update: 33.0 ROM went in just fine on a dirty flash, and the problem appears to be solved. No idea if this will happen again as those apps get newer versions in the play store.
i am trying to flash a ruu to get my imei no back as suggested on :
http://forum.xda-developers.com/showthread.php?t=2074288&page=2
for that i am trying to s-off my HOX+ which is currently s-on.
i tried the "rumrunner" and "firewater" method, but in vain.
is there any other way around this?!
quantum94 said:
i am trying to flash a ruu to get my imei no back as suggested on :
http://forum.xda-developers.com/showthread.php?t=2074288&page=2
for that i am trying to s-off my HOX+ which is currently s-on.
i tried the "rumrunner" and "firewater" method, but in vain.
is there any other way around this?!
Click to expand...
Click to collapse
AND this is what happens when people don't read the forum!
YOU CANNOT S-off the X+
YOU NEED to find your RUU, don't ask me for it, I don't have one.
Lloir said:
AND this is what happens when people don't read the forum!
YOU CANNOT S-off the X+
YOU NEED to find your RUU, don't ask me for it, I don't have one.
Click to expand...
Click to collapse
As far as the ruu is concerned, I already downloaded it:
RUU_ENRC2B_U_JB_45_hTC_Asia_WWE_1.17.707.1_Radio_3.1204.168.32_release_299722_signed.exe
(I stay in India-so Asia version of ruu)
What are you saying about s-off?!
Why cant I s-off HOX+ ?
Its only after reading the forum :http://forum.xda-developers.com/showthread.php?t=1672425 ,I came to know that to run the ruu I need to s-off first since i am going back to stock rom from my current cm11 nightly.
At first, I tried running the ruu with s-on but it gave me an error.
Can u plz explain?!
quantum94 said:
As far as the ruu is concerned, I already downloaded it:
RUU_ENRC2B_U_JB_45_hTC_Asia_WWE_1.17.707.1_Radio_3.1204.168.32_release_299722_signed.exe
(I stay in India-so Asia version of ruu)
What are you saying about s-off?!
Why cant I s-off HOX+ ?
Its only after reading the forum :http://forum.xda-developers.com/showthread.php?t=1672425 ,I came to know that to run the ruu I need to s-off first since i am going back to stock rom from my current cm11 nightly.
At first, I tried running the ruu with s-on but it gave me an error.
Can u plz explain?!
Click to expand...
Click to collapse
Oh jesus that's for the sensation!! Look, I'm fedup of users like yourself not bothering to search, ALL YOUR ANSWERS ARE ON THIS FORUM
Lloir said:
Oh jesus that's for the sensation!! Look, I'm fedup of users like yourself not bothering to search, ALL YOUR ANSWERS ARE ON THIS FORUM
Click to expand...
Click to collapse
yes..i understood we cant s-off x+
so..umm what are my options to get back to stock rom to retrieve the imei..?
i read on forum on which u posted something about cid matching with the list u gave.
Unfortunately, my cid is HTC__038 which isn't in the list!
so what can i do?
here's my HOX+ info:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 3.1204.171.33
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.707.6
(bootloader) serialno: FA31NW101103
(bootloader) imei: 35xxxxxxxxxxxxx
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3990mV
(bootloader) devpower: 72
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0