Hey guys, my friend decided to flash a custom rom, asked me for help, so I told him to get rom manager and install cwm first.
He was rooted already, not long after telling him. To use rom manager to get cwm, he messages me telling me he is stuck cwm, it seems that every time he turns in the phone or restarts he cannot leave cwm at all, he also claims he cannot get into download mode, keeps taking him to cwm.
I got him to and re flash cwm via cwm, but it gave him an error.
Has anyone heard of getting stuck in cwm before??
Latest version for i9300
Sent from my GT-I9505 using xda premium
Get your friend to read the stickies in general, before he flashes anything else and destroys his phone.
Follow the guide to restoring to fully stock using odin on his pc, it might enable the phone to boot normally.
boomboomer said:
Get your friend to read the stickies in general, before he flashes anything else and destroys his phone.
Follow the guide to restoring to fully stock using odin on his pc, it might enable the phone to boot normally.
Click to expand...
Click to collapse
Hes saying that he cannot get into Download Mode though D:
Factory reset plus reflash a rom via cwm?
Sent from my GT-I9300 using Tapatalk 4
Update: Got my hands on his phone today, he had just corrupt the boot partition (and recovery?)
Red exclamation mark upper left, I presume because of flashing.
Download mode worked for me first go, Just flashed the latest Phillz Recovery 6 0 3 3 and then the latest 4.3 PacRom c:
His phones fine now.
/Thread Close
Related
Last week I flashed LD3 for my Galaxy S2 i777. Today I was going to flash CM9. Every time I tried to boot into recovery it just started the phone.
I figured I could use mobile odin to flash a new kernel and it would fix it. Like an idiot I used a Gingerbread kernel on my phone running an ICS rom. So of course my phone froze on the "Galaxy S2" screen.
I couldn't boot into recovery and freaked out because I couldn't boot into dl either. I ordered a jig but kept fiddling in the meantime. I found that if I hook my phone to the USB, wait for the battery charging icon, take the battery out, then hold the down button it would boot into dl mode. Then I had to put the battery back in before I clicked continue or else it just reset.
Ok, so got into DL mode. I grabbed the stock rom and kernel from XDA site and flashed them with Odin. http://forum.xda-developers.com/showthread.php?t=1286432 (can't post links yet).
The phone starts and setup mode begins. It shows the android figure and says click it. Now all kinds of errors pop up telling me different google services weren't working and force close. When you click the android figure it goes to setup wizard screen but nothing happens (except more android service errors).
Can someone help me out here? I've been at it 5 hours and searched this forum high and low. My thought is there are some ICS elements left behind in there it is trying to load, but I could be way off.
I still can't boot into recovery mode, just DL.
PenguinSpark said:
Last week I flashed LD3 for my Galaxy S2 i777. Today I was going to flash CM9. Every time I tried to boot into recovery it just started the phone.
I figured I could use mobile odin to flash a new kernel and it would fix it. Like an idiot I used a Gingerbread kernel on my phone running an ICS rom. So of course my phone froze on the "Galaxy S2" screen.
I couldn't boot into recovery and freaked out because I couldn't boot into dl either. I ordered a jig but kept fiddling in the meantime. I found that if I hook my phone to the USB, wait for the battery charging icon, take the battery out, then hold the down button it would boot into dl mode. Then I had to put the battery back in before I clicked continue or else it just reset.
Ok, so got into DL mode. I grabbed the stock rom and kernel from XDA site and flashed them with Odin. http://forum.xda-developers.com/showthread.php?t=1286432 (can't post links yet).
The phone starts and setup mode begins. It shows the android figure and says click it. Now all kinds of errors pop up telling me different google services weren't working and force close. When you click the android figure it goes to setup wizard screen but nothing happens (except more android service errors).
Can someone help me out here? I've been at it 5 hours and searched this forum high and low. My thought is there are some ICS elements left behind in there it is trying to load, but I could be way off.
I still can't boot into recovery mode, just DL.
Click to expand...
Click to collapse
Did you do a full wipe before flashing the stock rom and kernel?
I did not do a full wipe. How can I go about that without logging into recovery? I'm googling that now but if you have linkage I would appreciate it.
mattdm said:
Did you do a full wipe before flashing the stock rom and kernel?
Click to expand...
Click to collapse
dont need to wipe when using Odin/Heimdall.
To OP:
there is only factory recovery, no CWM, you could always just flash a kernal from the DEV section, get CWM, flash CM9.
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
PenguinSpark said:
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
Click to expand...
Click to collapse
So let me get the straight...you're on unrooted stock right now? If that's true, you should:
1. Do a factory reset from settings.
2. Use Odin to flash the Stock with Root package.
3. Use Mobile Odin to flash either Entropy's DD or Siyah.
4. Use CWM to flash what you want after that.
PenguinSpark said:
If I flash another kernel wouldn't I still have the same problem? I'll go ahead and give it a shot. Any you recommend for any reason or other?
Click to expand...
Click to collapse
recovery is in kernal. If you flash a kernal from the DEV section you'll get CWM recovery, then you can flash your CM9 that you wanted, after a wipe data/factory reset.
MotoMudder77 said:
recovery is in kernal. If you flash a kernal from the DEV section you'll get CWM recovery, then you can flash your CM9 that you wanted, after a wipe data/factory reset.
Click to expand...
Click to collapse
Yes, but if he flashes said kernel with Odin, it'll trip his flash counter. I'm just telling him the safe way to do it, Mobile Odin.
I've already tripped my counter. I have a jig that will be here tomorrow so I can use it to reset the counter.
I can't use mobile odin because I can't log into my phone. I can only use desktop Odin.
All the files I am digging up look like .zip made for cwm. Could someone help guide me towards a kernel I can flash from desktop?
PenguinSpark said:
I've already tripped my counter. I have a jig that will be here tomorrow so I can use it to reset the counter.
I can't use mobile odin because I can't log into my phone. I can only use desktop Odin.
All the files I am digging up look like .zip made for cwm. Could someone help guide me towards a kernel I can flash from desktop?
Click to expand...
Click to collapse
Either Entropy's DD or Siyah. You can open the zip and extract the zimage; the zimage is the kernel.
I just tried using Syiah:
http://forum.xda-developers.com/showthread.php?t=1367800&highlight=cf-root
I still get this message:
"The process android.process.acore has stopped unexpectedly. please try again"
I can't get past the setup screen.
And I still can't access recovery.
PenguinSpark said:
I just tried using Syiah:
http://forum.xda-developers.com/showthread.php?t=1367800&highlight=cf-root
I still get this message:
"The process android.process.acore has stopped unexpectedly. please try again"
I can't get past the setup screen.
Click to expand...
Click to collapse
you flashed siyah kernal, booted into recovery, wiped data, and reflashed and are still getting this?
I can't boot to recovery
PenguinSpark said:
I can't boot to recovery
Click to expand...
Click to collapse
Flash the return to stock package from Odin again. Something must have gone wrong with it the first time.
well thats wierd. Sorry man but are you doing it right?
vol down and power. hold it untill the screen flashes twice.
I flashed stock 3 times now. I couldn't get into recovery before this (manually or with rom manager) and still can't. It starts like its going into recovery then just resets and loads normally.
Down is for dl mode, up is recovery.
I think the lack of ability to boot into recovery and the android service errors may be related.
PenguinSpark said:
I flashed stock 3 times now. I couldn't get into recovery before this (manually or with rom manager) and still can't. It starts like its going into recovery then just resets and loads normally.
Down is for dl mode, up is recovery.
I think the lack of ability to boot into recovery and the android service errors may be related.
Click to expand...
Click to collapse
Forget recovery. You shouldn't be worrying about recovery until after you get your phone booting.
New thought: maybe your download of the stock package is corrupted. Try to download it on your computer again. Download the one with root. If that fixes it, you can go use Mobile Odin to flash the Siyah kernel.
To get into recovery hold down both volume up, volume down, and power button and don't let go until recovery comes up.
Sent from my SAMSUNG-SGH-I777 using XDA
I have been using the rooted. The fully stock won't dl. This started because I flashed a gb kernel instead of ics. Maybe I should try flashing an ics kernel instead of stock gb?
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Haizum74 said:
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Click to expand...
Click to collapse
Yup, as long as you can get to download mode, you can use odin and flash back to stock.
Haizum74 said:
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Click to expand...
Click to collapse
Yup enter in to download mode and flash it using ODIN everythin wil b fine I hav experienced the same problem so many times
Phew, I was panicking there. Thanks guys. Do I also need to download the seperate kernel and modem? Im coming from a Nexus S and didnt have these options
Haizum74 said:
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Click to expand...
Click to collapse
I have the exact problem as you,but I couldn't flash the stock rom for my country..via Odin
Don't bother with superwipe, just wipe data/factory reset in cwm and of you really feel the need you can format system under mounts and storage in cwm.
Just make sure you have something to flash already on your phone before you do, and don't reboot after formatting system.
Flashing stock via Odin will fix your problem now.
Sent from my GT-I9300 using xda premium
nodstuff said:
Don't bother with superwipe, just wipe data/factory reset in cwm and of you really feel the need you can format system under mounts and storage in cwm.
Just make sure you have something to flash already on your phone before you do, and don't reboot after formatting system.
Flashing stock via Odin will fix your problem now.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks. I dont usually format and have no idea why I thought it was a good idea to do it this time. I was going to mount internal storage through CWM and put the ROM on it but there was no option to mount it.
EDIT - All sorted. Thanks for the info
If you know how to use adb you could put the ROM on your sdcard through cwm.
Sent from my GT-I9300 using xda premium
Or if you're not comfortable with adb and got an external SD, put the external SD in your PC and transfer the cwm rom to that and flash it from external SD on your phone
if i helped-hit thanx
i have s3. i rooted the phone then tried to install flash miui v5 via with but failed -i guess- because phone is lack of cwm. so i installed cwm but the phone wouldnt boot to recover mode, instead there was always original recovery mode. so i tried again and again but still anything change. then i tried to unlock bootloder with a app named ez lock i guess i did it but after something my phone went to download mode by itself and there is nothing else. top left there is no version info. just download mode with a green android guy. i removed battery and take it back, and tried to open download mode again there was infos top left screen this time. but when i tried to enter recovery mode it just load something in cwm recovery then there is again download mode without infos top left.
now im downloading stock rom, hope it'll work. is there anything else i can do guys? please help me, im not good at this stuff..
Tried to Flash stock firmware ?
sent from the state where marijuana is NOT illegal !!
Bootloader ??? do you actually have a I9300 as bootloader is not locked .
please help me, im not good at this stuff.. That would be due to not bothering to read the faqs and guides first .
My guess is that you have bricked your phone and need a paid for service repair .
i tried to flash to stock rom with odin, but somehow it failed to flash :S then phone stucked at a screen that says "firmware upgrade encountered an issue. please select recovery mode in kies & try again. then i found this http://forum.xda-developers.com/showthread.php?t=2261153 and my phone opened.
i have a question though, why didnt cwm open in the phone? if it had opened i would've install miui
Things went wrong because you didn't read or follow the many guides on XDA that other members wrote to help you. Guessing what to do can be very expensive.
CWM didn't open because you flashed in onto a stock ROM, which immediately restored a stock recovery.
boomboomer said:
Things went wrong because you didn't read or follow the many guides on XDA that other members wrote to help you. Guessing what to do can be very expensive.
CWM didn't open because you flashed in onto a stock ROM, which immediately restored a stock recovery.
Click to expand...
Click to collapse
but i couldnt install miui because cwm wouldnt open, before that i had stock rom which same now too. anyway now i have rooted 4.1.2 stock rom of samsung with counter 7 :laugh:
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
xringo said:
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
Click to expand...
Click to collapse
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
theunderling said:
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
Click to expand...
Click to collapse
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Jeetu said:
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes I have 4.1.2. I checked the thread out . My baseband is i9100xxms4 but the thread has only xxms1. Does that matter or?
xringo said:
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Click to expand...
Click to collapse
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
theunderling said:
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
Click to expand...
Click to collapse
So what can I do? I dont mind flashing cwm with odin as long as I dont brick my phone again. I've already rooted, if i use odin to get cwm , will it cause problems? Is there no other way to get cwm without odin? Maybe flashing a zip?
Yes,Jeetu said earlier.
theunderling said:
Yes,Jeetu said earlier.
Click to expand...
Click to collapse
Probem is my baseband is xxms4 while the philz only has one xxms1. Will it still work?
bump
i rooted my devce using cwm(n9005-cwm-recovery-6.0.4.7-kk(0125)) and gained super su access.
tried to put new rom on went through the process of backing up which i dont thinhk worked, and wiping the sustem
tried to put on new rom using cwm and got an error on startup
so i tried to go back and start the whole process over again
using odin i tried to flash the phone and FAIL
i am stuck in a loop everytime i start normal or start in cwm i get a message saying firmware upgrade encountered an issue. please select recovery mode in kies and try again
but i can still use ODIN
What can i do
Thanks
I'd use TWRP if I were you and save yourself some headaches. From my understanding, CWM is hit or miss on our beloved Note 3.
https://dl.twrp.me/hltespr/twrp-2.8.6.1-hltespr-4.4.img.tar.html
Sent from my SM-N900P using XDA Free mobile app
Shotty2015 said:
i rooted my devce using cwm(n9005-cwm-recovery-6.0.4.7-kk(0125)) and gained super su access.
tried to put new rom on went through the process of backing up which i dont thinhk worked, and wiping the sustem
tried to put on new rom using cwm and got an error on startup
so i tried to go back and start the whole process over again
using odin i tried to flash the phone and FAIL
i am stuck in a loop everytime i start normal or start in cwm i get a message saying firmware upgrade encountered an issue. please select recovery mode in kies and try again
but i can still use ODIN
What can i do
Thanks
Click to expand...
Click to collapse
First what version of KK where you on when you rooted your device ? Anyway pull battery then reinstall battery. Boot into download mode, then odin flash the version of KK you had before you rooted your phone.
Chances are the device won't boot. DON'T PANIC !!! Happenes all the time, just pull the battery again. Boot into download mode again, and odin flash the stock KK again it should boot the second time.
Once you get it to boot up, check and see what version of KK you are running and make the kernel , modem, and bootloader are the same.
At this point l would odin flash it again to make sure you have a clean install. Now you can root and install a custom recovery. I use TWRP.
IF you have any questions just click rom flashing basics in my signature.
Pull battery boot cold to download mode. From there attempt odin flash of factory tar image. Report back please.
Sent from my 0x1 Note 3...... I love tep
i was originally using the stock 5.0 lollipop i rooted using the method on galaxynote3root. tried re flashing but got a fail again i dont know if im using the right kernel
odin OC5 tar.
odin cfautoroot.
odin twrp.
done. easy peasy.
WOOOP WOOOOOOOP.
It worked. it took 10 tries, but it finally worked
now to root is this the right cfautoroot
CF-Root: 48 514 333
CF-Auto-Root: 29 510 246
This file: 106 225
i just dont want to mess it up again
thanks so much guys
every things good rooted and twrp installed.
Thanks again guys