apparently i kept thinking this nook was a nook color but it is a nook tablet(color) BNTV250. i have been able to root it to try android on it but it just could keep a charge so i went back but so far i got it back to stock rom 1.4.2 but cant update and get the downloadadmin error force stop. i have tried to root it again to see if CWM can install the update because even though i downloaded the update and put it in the root directory of the nook it just sits there even after it goes to sleep plus the zip file dissapears when i plug it back into usb mode. i am trying to get rid of it but i cant till i can get the apps & games to install and update.
Xnitro67 said:
apparently i kept thinking this nook was a nook color but it is a nook tablet(color) BNTV250. i have been able to root it to try android on it but it just could keep a charge so i went back but so far i got it back to stock rom 1.4.2 but cant update and get the downloadadmin error force stop. i have tried to root it again to see if CWM can install the update because even though i downloaded the update and put it in the root directory of the nook it just sits there even after it goes to sleep plus the zip file dissapears when i plug it back into usb mode. i am trying to get rid of it but i cant till i can get the apps & games to install and update.
Click to expand...
Click to collapse
Have you tried making a bootable sd card version ? you might try that , and try out cm 7/9/10 first ?
Building a CM10.1 (JB 4.2.x) SD card for Nook Tablet
http://forum.xda-developers.com/showthread.php?t=2098419
spydergt said:
Have you tried making a bootable sd card version ? you might try that , and try out cm 7/9/10 first ?
Building a CM10.1 (JB 4.2.x) SD card for Nook Tablet
http://forum.xda-developers.com/showthread.php?t=2098419
Click to expand...
Click to collapse
ive been trying before but i dont want to use cm im just wanting to get it to update and fix the installing issue. so can i use the bootable sd card to install the update cause like i said i cant even get it over wifi or by downloading the zip file?
I don't know what's going on, but try resetting your device completely by using the repart.img, and then start over from there.
http://forum.xda-developers.com/showthread.php?t=1663836
The download is in step 1. No need to do anything exept the download from step 1.
Jump to step 2 and ectract to get the repart.img
If you've got image writing software already, just burn the repart.img and run it. After a few minutes a green checkmark should appear. Take the card out and a rather lengthy reboot and updateing process starts. Once that is done you're back to out of the box brand new condition and can start over again.
asawi said:
I don't know what's going on, but try resetting your device completely by using the repart.img, and then start over from there.
http://forum.xda-developers.com/showthread.php?t=1663836
he download is in step 1. No need to do anything exept the download from step 1.
Jump to step 2 and ectract to get the reapr.img
If you've got image writing software already, just burn the repart.img and run it. Afte a few minutes a green checkmark should appear. Take the card out and a rather lengthy reboot and updateing process starts. Once that i sdone you're back to out of the box brand new condition and can start over again.
Click to expand...
Click to collapse
so i assume this will fix the downloading apps and be able to update?
Xnitro67 said:
so i assume this will fix the downloading apps and be able to update?
Click to expand...
Click to collapse
that will take you back to factory , asawi knows his stuff , deff give that a whirl and keep in touch , let us know if it gets fixed too
OMG! I just read through my post and it's a miracle if someone understands it with all those spelling errors... Will go correct...
Anyway, as stated, if this works it brings you right back to a brand new device and you can start over again. By "start over" I mean update to 1.4.3 if you want to and then root if that is what you want.
It's usually easier to start ove than trying to find some obscure error!
so far so good i restarted it after i got through all the intro stuff and didnt get no downloadadmin error. ill try doing the update here in a bit
Edit: Omg finally its over! thanks a bunch asawi placed the zip in the nook after a bit it updated so believe now its fixed ive thanked both you and spydergt.
Xnitro67 said:
so far so good i restarted it after i got through all the intro stuff and didnt get no downloadadmin error. ill try doing the update here in a bit
Click to expand...
Click to collapse
Fingers crossed!
Once updated there are a couple of root scripts to choose from. They basically do the same thing, Some links are dead because this is pretty old stuff, but I think this one is alive: http://forum.xda-developers.com/showthread.php?t=1488035 The download is small, but it needs to be extracted and put on a 2GB or larger sd-card for use.
It's pretty old, so when first applied the Google Play store probably shows up as "Market", but it will update itself to Google Play after a while if you open it a couple of times.
I don't want to root it again trying to sell it
Xnitro67 said:
I don't want to root it again trying to sell it
Click to expand...
Click to collapse
Aaaah! Well, then you're good to go now! :good:
Related
Hey xda forums, first time poster, long time reader. I rooted my Nook color from these forums and find them to be most informative. I just got back from hiking the Grand Canyon to find my G Tablet waiting for me from Woot.
As I did with my Nook, I immediately started to replace the stock rom with Cyanogenmod 7 beta. I followed the instructions on the Wiki, including installing Gapps, by putting them on the internal SD and using CWM to install from zip. After everything was done however I am now stuck at the Viewsonic splash screen. I tried to read thru the Googles and tried reflashing back to stock by way of some instructions on DroidPirate I think it was, to no avail. I can't even see my external SD card to load the update to recover. Please help. Anyone?
I would get nvflash set up with bekit's images and flash that to get yourself back to a working stock image. Follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=861950
After that, put Clockworkmod ( v .8, get it from development forum) on it and repartition your sdcard to 2048 and 0 then you should be ready to flash.
Then get a ROM from the development forum here, there are some based off cm7 (gingerbread builds).
I was hoping not to have to use NVflash cuz people report problems with the boot loop, however I havent found any other option so far so I guess i'm trying that. Thanks for the link.
Xxlgeek,
Every time I hear boot loop I think re-partition -- because most of the time that
seems to fix the problem.
I agree you should NVFlash to get a stock version working. Then install CWM so
you can partition -- and the do the Fix Permissions, Wipe Dalvik Cache, Wipe
Cache, Wipe Factory Data.
With that I would try to wind up with a stock machine and let it OTA up to 3588.
I wouldn't load another Alternate Rom until I knew my tablet is working good and
until I know a lot more about the roms and how to work with the G-Tablet.
IMHO.
Rev
I can actually boot into CWM right now. I already repartitioned and wiped all the caches. But when I try to flash Cyanogenmod 7 again, which is on the root of the internal memory, it just does the same thing, won't load past splash screen.
Xxlgeek,
If it didn't work, I would erase the Cyanogenmod 7 file -- and I would go back to a stock rom until I could make sure all the hardware is working right and the system
is stable.
When you know the tablet is good and stable, you can always download and re-do.
Rev
Xxlgeek said:
Hey xda forums, first time poster, long time reader. I rooted my Nook color from these forums and find them to be most informative. I just got back from hiking the Grand Canyon to find my G Tablet waiting for me from Woot.
As I did with my Nook, I immediately started to replace the stock rom with Cyanogenmod 7 beta. I followed the instructions on the Wiki, including installing Gapps, by putting them on the internal SD and using CWM to install from zip. After everything was done however I am now stuck at the Viewsonic splash screen. I tried to read thru the Googles and tried reflashing back to stock by way of some instructions on DroidPirate I think it was, to no avail. I can't even see my external SD card to load the update to recover. Please help. Anyone?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1021978
you are not alone...
it may have to do with the boot loader .... further investigation needed. CW does not replace this but the stock does I have been running the old one since december on my personal tab. but most of these woot pads are updated .... hmmmmmm
Xxlgeek said:
I can actually boot into CWM right now. I already repartitioned and wiped all the caches. But when I try to flash Cyanogenmod 7 again, which is on the root of the internal memory, it just does the same thing, won't load past splash screen.
Click to expand...
Click to collapse
Which version of CM7 are you running?
jivy26 said:
Which version of CM7 are you running?
Click to expand...
Click to collapse
doesnt matter all the gbread roms do this when the error happens. thats why i am starting to think its the bootloader
Just throwing this out there. I bought 2 from Woot myself. On my first G-Tab I had the same issue with every single ROM I tried. I finally used NVFlash to go back to stock and everything was good again. I then flashed to the G-Harmony Gingerbread ROM and it worked and still runs like a CHAMP. Now, I finally get the other G-Tab out and start to go through the same routine as the first and it's been a no go repeatedly. I have mostly been trying with the Cyanogen 7 Final ROM to no avail and even with the G-Harmony. Going to try NVFlash on number 2 tab and see what the result is and will post back in a bit with updates.
Ok, I said I would reply and here it is. The downside is this.... The NVFlash worked great and put me back to stock. The bad part is that I am not sure that was what actually caused the problem to occur in the first place on the second tablet. I had read right before doing this that installing the Clockwork mod from the SD card instead can be a fix as well. I did that this time through. It also shows something different on the screen when you hold down the start and vol+ buttons than it was when CWM was installed wrong.
So basically this:
Run NV Flash (Detailed here: http://forum.xda-developers.com/showthread.php?t=861950 )
Run Clockwork Mod FROM THE SD CARD!!! (Detailed here: http://forum.xda-developers.com/showthread.php?t=865245 )
Then proceed to follow those exact instructions from the same thread.
Do not skip stuff, do not think you have a better path, just do it all as described. I now have a G-Tablet running the Cyanogen Mod 7 Final release SMOOTH as glass! Hope this helps someone else out.
tunez23 said:
Ok, I said I would reply and here it is. The downside is this.... The NVFlash worked great and put me back to stock. The bad part is that I am not sure that was what actually caused the problem to occur in the first place on the second tablet. I had read right before doing this that installing the Clockwork mod from the SD card instead can be a fix as well. I did that this time through. It also shows something different on the screen when you hold down the start and vol+ buttons than it was when CWM was installed wrong.
So basically this:
Run NV Flash (Detailed here: http://forum.xda-developers.com/showthread.php?t=861950 )
Run Clockwork Mod FROM THE SD CARD!!! (Detailed here: http://forum.xda-developers.com/showthread.php?t=865245 )
Then proceed to follow those exact instructions from the same thread.
Do not skip stuff, do not think you have a better path, just do it all as described. I now have a G-Tablet running the Cyanogen Mod 7 Final release SMOOTH as glass! Hope this helps someone else out.
Click to expand...
Click to collapse
I too am having the same problem but when I try to run NVFlash, I get the error "nvflash configuration file error: file not found Press enter to continue:"
The tablet doesn't restart or anything. I followed the steps to re-partition and install the ROM from "http://forum.xda-developers.com/showthread.php?t=865245." After that didn't work, I tried the steps from "http://forum.xda-developers.com/showthread.php?t=861950" and I get stuck at running the nvflash_gtablet.bat file.
Any help would be appreciated.
Did you extract both archives to the same directory on your computer?
akodoreign said:
doesnt matter all the gbread roms do this when the error happens. thats why i am starting to think its the bootloader
Click to expand...
Click to collapse
2 partitions are reversed and Gingerbread roms don't like it. Using bekits original nvflash files will fix the partitioning permanently as far as flashing between froyo and gingerbread.
Any official updates from viewsonic past 3588 have a locked bootloader and require viewsonics kernel so you must use Gojimis fix or nvflash to go back.
Edit.....This is not all tablets. I'm guessing around 30% or so have the 2 reversed partitions but it seems 50% of the woot tabs. Helped fix many of these on irc in the last 2 weeks
KrazyOne7 said:
I too am having the same problem but when I try to run NVFlash, I get the error "nvflash configuration file error: file not found Press enter to continue:"
The tablet doesn't restart or anything. I followed the steps to re-partition and install the ROM from "http://forum.xda-developers.com/showthread.php?t=865245." After that didn't work, I tried the steps from "http://forum.xda-developers.com/showthread.php?t=861950" and I get stuck at running the nvflash_gtablet.bat file.
Any help would be appreciated.
Click to expand...
Click to collapse
Having the same problem too!! Any help would be much appreciated.
Tried wiping everything with FORMAT.zip from another thread, and get and error for unknown device when running that *.bat file.
This newbie needs some serious help!
Locked bootloader??!
thebadfrog said:
Any official updates from viewsonic past 3588 have a locked bootloader and require viewsonics kernel so you must use Gojimis fix or nvflash to go back.
Click to expand...
Click to collapse
I think I must have the locked bootloader, but tried both Gojimis's fix and nvflash fix and get the error as mentioned above.
So I am getting nowhere, won't go past the "booting..." splash screen to install any of the update.zip files from the microSD card.
Help!
K J Rad said:
Did you extract both archives to the same directory on your computer?
Click to expand...
Click to collapse
Yes, I extracted both the gtablet and the windows zip files.
KrazyOne7 said:
Yes, I extracted both the gtablet and the windows zip files.
Click to expand...
Click to collapse
Me too, and still getting the error "nvflash configuration file error: file not found Press enter to continue:"
Are they in the same directory. If they are not then nvflash can not find the files to flash. Both zips have to be unzipped in the same directory and the driver has to work. You must be able to see the tablet from the computer when you boot into apx mode. APX mode is power/vol- NOT power/vol+
Hi all,
I had rooted my nook tablet using snowball mod about a week ago and I loaded CWM on to the emmc using indirect's one-click recovery flash app. It was all working fine.
I wanted to return to stock and so put the 1.4.0 zip on my sdcard and rebooted. But it went straight to CWM. So I remembered i had to restore the stock recovery and rebooted and flashed stock recovery. only this time, I used the updated version of the one-click app (the updated version of 26th Jan) and hit reboot to recovery. This caused my NT to be in a boot loop ever since.
I have tried the 8 failed reboot method to initiate a factory reset but it didn't work. I also tried using the Nook Recovery Fix but i can't get to install the drivers since if I connect the NT to my computer, it keeps rebooting over and over again and I can't get to show for longer than 2 secs in device manager to install the drivers for Windows. (I was using it on Ubuntu till now).
My NT just turns on, the black screen n logo shows (The "With adobe reader" screen) however it doesn't go any farther than that. It just shuts down. The white nook screen does not even show. It's like it's going through multiple failed reboots without me holding down any buttons. Any help from you guys is greatly appreciated. Thanks.
You have to make a bootable SD with CWM on it so that the computer can actually catch the Nook long enough to do anything. Also, I'm pretty sure the B&N drivers restrict what you can do, but I'm not really sure what's gonna happen if you connect for the first time in CWM. I say use the Nook and Zergy method for the drivers (the first part, runmefirst.bat)
After that, try the Nook Recovery. It should work. I'm not positive on this, but from what I've read, that's what you do.
CWM SD:
http://forum.xda-developers.com/showthread.php?t=1446987
Really though, no promises. Good luck. Lemme know how it turns out.
Data Injures said:
You have to make a bootable SD with CWM on it so that the computer can actually catch the Nook long enough to do anything. Also, I'm pretty sure the B&N drivers restrict what you can do, but I'm not really sure what's gonna happen if you connect for the first time in CWM. I say use the Nook and Zergy method for the drivers (the first part, runmefirst.bat)
After that, try the Nook Recovery. It should work. I'm not positive on this, but from what I've read, that's what you do.
CWM SD:
http://forum.xda-developers.com/showthread.php?t=1446987
Really though, no promises. Good luck. Lemme know how it turns out.
Click to expand...
Click to collapse
Thanks a lot for your suggestion! I just spent a half hour on the phone with B&N customer service and they agreed to ship out a replacement device. The rep said it was a hardware failure that was causing it to act like that. I was a bit surprised at that. I'm not sure she knew what she was talking about. Anyway I had bought mine off craigslist. And now I'm getting a new device so I guess I can't complain. But I'll try later tonight to restore this one using the bootable CWM you linked to. Thanks again.
Follow Up
Just thought of posting a follow up. The bootable CWM method worked. I was able to fix the recovery. Most certainly not a HW problem like the tech claimed. It's working fine now.
I'm glad to hear that! Now if I have the same problem in the feature I can just follow my own advice. Lol
Sent from my DROIDX using XDA App
So I have basically the same problem. My girlfreinds nook was rooted but the OTA update stopped the root from being effective. I tried the sd card revert to 1.4.0 and I hade the problem with the "n" butting not working. When i tried the 8x reset the nook went into an endless boot loop where I see the back screen and the next white screen flashes for like 2 seconds and then reboots. I tried to make the CWM SD card but it still just reboots. My question is that since i never had the CWM mod installed am I pretty much hosed or am I doing something wrong?
What are you using to make the CWM SD card? I strongly recommend using GParted either from a Linux live image or there is a GParted live image you could use. When it works correctly, the bootable SD card that should stop the boot loop.
But why did the boot loop problem occur in the first place ?
sailerph said:
But why did the boot loop problem occur in the first place ?
Click to expand...
Click to collapse
From what I know of, if you install stock recovery and hit the reboot to recovery button, it initiates the stock recovery which then causes the error. Though I don't know the reason behind nor what's causing the problem, just relaying what I have read around the forums.
From what I understand when you flash CWM it's recovery replaces the stock recovery so when you try to install the stock recovery, which you should not do, it is trying to pull from something that's no longer there. I learned this lesson the hard way.
Denmmurray said:
From what I understand when you flash CWM it's recovery replaces the stock recovery so when you try to install the stock recovery, which you should not do, it is trying to pull from something that's no longer there. I learned this lesson the hard way.
Click to expand...
Click to collapse
Hm I actually unrooted my nook a couple of times to play with it. I reinstalled the stock recovery from the app on multiple occasions, but instead of clicking reboot to recovery, I ran the one click unroot and never ran into any trouble.
I just bought a new Prime a couple days ago and installed the offical ICS update.
Today it's been going into a bootloop rage LOL.Is there a stock recovery that I could clear caches if that even exists..Any advice will be graciously welcome!Thanks
Not until ASUS unlocks the bootloader.
Dougfresh said:
I just bought a new Prime a couple days ago and installed the offical ICS update.
Today it's been going into a bootloop rage LOL.Is there a stock recovery that I could clear caches if that even exists..Any advice will be graciously welcome!Thanks
Click to expand...
Click to collapse
Yes there is a stock recovery, but it will not help you in any way. From it, you can do absolutely nothing. Sorry to be the bearer of bad news but that's just the way it is at the moment.
To get to it you need to switch off the device, then once it is off, hold (volume down + power) this will bring you to a screen saying push 'vol up' for RCK. You may get lucky and clear whatever it is that's misbehaving, but it will only look at what is in it's own recovery partition, which for most is "Jack Sh#t"!
The other options after the countdown are factory reset (which clears only user data and has no relevance to the /System partition), or "cold boot linux" which is self explanatory.
I wish you luck in your endeavours.
Bro this thing reboots every 10 minutes! When on the power cable,it stabilizes.
Before I bought, I read on all the issues but took the dive in but this is ridiculous!
I read theres an update next week to fix this issue but the last update was to do the same fix Oh well.I'm waiting for the update and if it doesn't resolve this then Imma gonna give bestbuy a little visit
Dougfresh said:
Bro this thing reboots every 10 minutes! When on the power cable,it stabilizes.
Before I bought, I read on all the issues but took the dive in but this is ridiculous!
I read theres an update next week to fix this issue but the last update was to do the same fix Oh well.I'm waiting for the update and if it doesn't resolve this then Imma gonna give bestbuy a little visit
Click to expand...
Click to collapse
I misunderstood and assumed that you were simply in a boot-loop. Whatever software version you are currently on, .11 or .13 you could try the actual update procedure from the sdcard. But only if you can boot into the system properly.
All you do is download the relevant zip, then unzip it. You will now have a new zip that you put on the root of your sdcard and start the device up. This will re-flash your current software version and possibly sort out your issues, it has helped several people in the past.
I for one would just back up any photos, videos etc... then do a factory reset followed ny this flash technique. Do not use titanium backup to restore apps, just restore them one by one from the market.
This method eliminates any possibility of bad user data causing problems, then you will know that it is the device causing the issue.
I'm still from the old school where most computer problems are user related and not actually software related. ASUS are slowly making me re-think that though.
Im on build # 9.4.2.13 from like two days ago.I don't want to root it just yet, the instructions you gave me seems for root and custom recovery right?Thanks Doktaphex
Dougfresh said:
Im on build # 9.4.2.13 from like two days ago.I don't want to root it just yet, the instructions you gave me seems for root and custom recovery right?Thanks Doktaphex
Click to expand...
Click to collapse
Nope, for straight up standard ASUS non-rooted vanilla loveliness. Just go to ASUS website, find the download area for the Prime, download the .13 US firmware, unzip. Do not unzip the zip, that the unzipped zip gives you (I hope that bit makes sense ). Then put that onto your sdcard root directory (ie. do not put in a folder, just put it on the card) then stick it in the Prime, fire it up and the Prime should see it as a firmware update, you choose this and voila. Profit.
Ok dl'd to my ex-sd fired it up and nothing copied it to internal sd and nothing...
EDIT: I dl'd the Taiwan update instead(stupid).DL'd the US update and ran it to no improvement.Factory wiped and reinstalled and still getting reboots constantly.Does anyone think I should regress to .11 and then manually install .13 again...I'm thinking there's no benefit till the supposed new update next week
Dougfresh said:
Ok dl'd to my ex-sd fired it up and nothing copied it to internal sd and nothing...
EDIT: I dl'd the Taiwan update instead(stupid).DL'd the US update and ran it to no improvement.Factory wiped and reinstalled and still getting reboots constantly.Does anyone think I should regress to .11 and then manually install .13 again...I'm thinking there's no benefit till the supposed new update next week
Click to expand...
Click to collapse
You cannot downgrade to .11 unfortunately. I hope it gets fixed up soon though.
Honestly man I wouldn't wait if you you got it retail I would just go for an exchange if you can stock seems to be loosening up......who knows if the update will work or come on time and I'm a firm believer in once something starts showing signs of problems it rarely gets better it usually continues or gets worse
Sent from my PG86100 using xda premium
pbg225 said:
Honestly man I wouldn't wait if you you got it retail I would just go for an exchange if you can stock seems to be loosening up......who knows if the update will work or come on time and I'm a firm believer in once something starts showing signs of problems it rarely gets better it usually continues or gets worse
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Agreed! I have one on hold at bb for Monday. Imma leave it on HC if it's not pre loaded with ics...I'll check back afterwards thanks gentlemen!!!
so my gtab will only show the three birds, i took the cover of the back and held down the reset button and it turned off then back on to the same screen. I even tried to nv flash it and it says that it currently update. Im not even able to get into recovery mode. Am i screwed or did i miss something, im sorta new to this stuff....thanks
1. What rom were you using?
2. Which version of CWM are you using?
3. What were you doing to the tablet when it froze like that?
There's a lot of things that can go wrong and which NVflash you use (250m partition or 350m partition) is going to be determined by which rom you wish to run.
The Gtablet for dummies site really helped me out while I was starting off, but it appears its no longer online.
Going to need some more info and I'll try to help as best and as fast as possible, but real life keeps me pretty busy most of the time.
tobalaz said:
1. What rom were you using?
2. Which version of CWM are you using?
3. What were you doing to the tablet when it froze like that?
There's a lot of things that can go wrong and which NVflash you use (250m partition or 350m partition) is going to be determined by which rom you wish to run.
The Gtablet for dummies site really helped me out while I was starting off, but it appears its no longer online.
Going to need some more info and I'll try to help as best and as fast as possible, but real life keeps me pretty busy most of the time.
Click to expand...
Click to collapse
i had ics, not sure what version, clock i think was 5. something. i know that this dont help much. i was able to get it working,
what i was trying to do was get it back to the way it came new so i could start all over with a new rom. Now i found what i thought was the stock rom but all it will do is sit on the screen where it says gtablet, i even let it sit over night,while i was at work and still the same screen.
Nobe (has some kick ass roms) has already done the legwork in another thread, try this:
http://forum.xda-developers.com/showthread.php?t=2070655
first download, should but you back at stock with a 1.2 branch ready to go.
I know it sucks, I've NVflashed dozens of times to work off of stock, I still get a little jittery every time I load another rom.
tobalaz said:
Nobe (has some kick ass roms) has already done the legwork in another thread, try this:
http://forum.xda-developers.com/showthread.php?t=2070655
first download, should but you back at stock with a 1.2 branch ready to go.
I know it sucks, I've NVflashed dozens of times to work off of stock, I still get a little jittery every time I load another rom.
Click to expand...
Click to collapse
so i tried reloading ics 4 beta that i had, after it said everything was installed and went to reboot it and just sat on the screen with birds. im able to turn off, go into recovery, and apx. So my father in law installed the 350 zip and jellybean 5.3 on his with no issues. i followed the same video he did and it said that everything installed good until i went to reboot, there it got stuck on the bird screen but im still able to do nvflash, apx and power down....Am i screwed ??
racefan82 said:
Am i screwed ??
Click to expand...
Click to collapse
We'll have to see.
See this thread, run the commands there and post the output.
Originally Posted by racefan82
Am i screwed ??
You may also try the detailed instructions by Raywaldo (Google Raywaldo for his site) on installing new ROMs on GTablet. In my opinion Smoother Bean v 1.5 (by nobe1976) is the best/fast ROM for this device.
OK. So. I've been encountering nothing but problems since I received my Huawei Ascend P2 phone.
To begin with -
I bought the phone for the sole purpose of it being 4G/LTE. When I got it, I couldn't figure out how to get it, so I contacted Three and was told that my phone had to be 4.3 - it was running 4.1.2.
When I tried to get 4.3 through whatever means, it stopped working.
I tried to do a complete factory reset and now I'm getting many more problems -
I keep getting errors that anything Google related has stopped working (especially Google keyboard).
My contacts won't auto-sync, despite me having my Google account synced up with it.
The icons at the bottom of the screen (back, home, settings/whatever else) won't light up and the home button isn't working.
It's a different loading screen than normal - before it was a Huawei Ascend splash screen, now it just says "Android".
It is not being detected by my laptop whatsoever.
When I try and download anything using a browser, it says "starting download" but nothing works.
So, anyone have a solution? It is driving me demented. And all because I wanted bloody 4G.
boneyarsebogman said:
OK. So. I've been encountering nothing but problems since I received my Huawei Ascend P2 phone.
To begin with -
I bought the phone for the sole purpose of it being 4G/LTE. When I got it, I couldn't figure out how to get it, so I contacted Three and was told that my phone had to be 4.3 - it was running 4.1.2.
When I tried to get 4.3 through whatever means, it stopped working.
I tried to do a complete factory reset and now I'm getting many more problems -
I keep getting errors that anything Google related has stopped working (especially Google keyboard).
My contacts won't auto-sync, despite me having my Google account synced up with it.
The icons at the bottom of the screen (back, home, settings/whatever else) won't light up and the home button isn't working.
It's a different loading screen than normal - before it was a Huawei Ascend splash screen, now it just says "Android".
It is not being detected by my laptop whatsoever.
When I try and download anything using a browser, it says "starting download" but nothing works.
So, anyone have a solution? It is driving me demented. And all because I wanted bloody 4G.
Click to expand...
Click to collapse
I think we need some more info on the attempt to upgrade via whatever means. What steps / guide were you following? Did you install a custom rom? If so, what rom and what recovery are you using? From a few minutes of searching around, it seems that there is no official 4.3 update for the phone, and just being ON 4.3 itself will not automagically enable LTE service as this has much to do with the radio/baseband used as much as the actual operating system and that will not get updated via a custom rom (99.999% of the time unless SPECIFICALLY stated). Seems like they are working on an LTE capable update/patch for 4.1.2 soon according to this: http://forum.xda-developers.com/showpost.php?p=50495570&postcount=162 (that post is part of a thread about your phone on a UK carrier so should be pertinent).
es0tericcha0s said:
I think we need some more info on the attempt to upgrade via whatever means. What steps / guide were you following? Did you install a custom rom? If so, what rom and what recovery are you using? From a few minutes of searching around, it seems that there is no official 4.3 update for the phone, and just being ON 4.3 itself will not automagically enable LTE service as this has much to do with the radio/baseband used as much as the actual operating system and that will not get updated via a custom rom (99.999% of the time unless SPECIFICALLY stated). Seems like they are working on an LTE capable update/patch for 4.1.2 soon according to this: http://forum.xda-developers.com/showpost.php?p=50495570&postcount=162 (that post is part of a thread about your phone on a UK carrier so should be pertinent).
Click to expand...
Click to collapse
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
boneyarsebogman said:
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
Click to expand...
Click to collapse
K. So you are still on the stock rom, rooted, with CWM recovery (which version?), and after you attempted to wipe /system, it failed to wipe (what was the error message there?), and now it boots and has all kinds of weird glitches? First thing to try would be to go back to CWM and wipe Cache and Dalvik Cache and then Fix Permissions. This MIGHT help. If it doesn't then you will just probably want to throw a stock rom back on there to get back to running right again.
es0tericcha0s said:
K. So you are still on the stock rom, rooted, with CWM recovery (which version?), and after you attempted to wipe /system, it failed to wipe (what was the error message there?), and now it boots and has all kinds of weird glitches? First thing to try would be to go back to CWM and wipe Cache and Dalvik Cache and then Fix Permissions. This MIGHT help. If it doesn't then you will just probably want to throw a stock rom back on there to get back to running right again.
Click to expand...
Click to collapse
I've wiped the Caches and Dalvik Cache and can't seem to find "Fix Permissions". I did some searching and it seems this feature was removed from CWM? I'm running v6.0.3.7 of CMW.
When I try to format the system, it says
E:format_volume failed to unmount "/system"
Error formatting /system!
Weird, they did take it out. Koush said it was a placebo. Which normally I would take as law, if it weren't for many times I have ran fix permissions and it caused apps that were force closing to not force close anymore. But whatever, if you wanna try, flash this: http://db.tt/9aWdF8Rp. It'll either help fix something, or do nothing. Won't make it any worse. If it can't mount to format though, it's either or a bug with CWM for your device, or after factory reset, reboot recovery and try again. But you really don't want to wipe /system unless you have a nandroid or another rom on your storage that is accessible.
Thanks so much for your help so far. Took me ages to figure out how to get that file on my phone, but I managed to do it. I then installed zip from recovery mode and chose the fix_permissions. Then reboot and it asked me to root the phone again. It's now upgrading and hopefully it will work now.
It is still saying "Unfortunately, Android keyboard has stopped" and other things. What do you reckon I can do now? You're right, it seems like I can't make it any worse.
boneyarsebogman said:
Thanks so much for your help so far. Took me ages to figure out how to get that file on my phone, but I managed to do it. I then installed zip from recovery mode and chose the fix_permissions. Then reboot and it asked me to root the phone again. It's now upgrading and hopefully it will work now.
It is still saying "Unfortunately, Android keyboard has stopped" and other things. What do you reckon I can do now? You're right, it seems like I can't make it any worse.
Click to expand...
Click to collapse
Ok. So looks like first thing to check is to see WHICH version of the P2 you have because it seems like there are at least 2 different sub versions of it. The P2-6070 and the P2-6011. Please go to Settings / About Phone/Device and let me know all the software info there.
Also, have you unlocked the bootloader (I'm guessing so since you have recovery, but just checking)?
I found some more info on how to get you back up and running, but want to confirm the system version so everything goes as smoothly as possible. There's a new update that just came out not too long ago that people are saying LTE works on, so hopefully we can get you to that point.
es0tericcha0s said:
Ok. So looks like first thing to check is to see WHICH version of the P2 you have because it seems like there are at least 2 different sub versions of it. The P2-6070 and the P2-6011. Please go to Settings / About Phone/Device and let me know all the software info there.
Also, have you unlocked the bootloader (I'm guessing so since you have recovery, but just checking)?
I found some more info on how to get you back up and running, but want to confirm the system version so everything goes as smoothly as possible. There's a new update that just came out not too long ago that people are saying LTE works on, so hopefully we can get you to that point.
Click to expand...
Click to collapse
Mine is the P2-6011.
Swear if we get this working, never changing anything ever.
Yes, the bootloader is unlocked.
Alright, so here is a link for the newest firmware for your phone :
http://huaweidevices.ru/ROM4221/P2/...R001C00B038CUSTC19D001_United_Kingdom_H3G.rar
Need to be on stock recovery. Unpack the rar file and put the whole folder /dload on the root of the SD card. This has the update.app that should take care of everything for you. Turn off the phone and turn it on by holding Vol + and - and Power together. This is supposed to boot it into the mode to take care of the update for you.
If you don't wanna go back to complete stock, I have another way that involves switching to TWRP recovery and restoring a rom via nandroid restore. If you'd prefer that, lemme know and I'll shoot you the links.
es0tericcha0s said:
Alright, so here is a link for the newest firmware for your phone :
http://huaweidevices.ru/ROM4221/P2/...R001C00B038CUSTC19D001_United_Kingdom_H3G.rar
Need to be on stock recovery. Unpack the rar file and put the whole folder /dload on the root of the SD card. This has the update.app that should take care of everything for you. Turn off the phone and turn it on by holding Vol + and - and Power together. This is supposed to boot it into the mode to take care of the update for you.
If you don't wanna go back to complete stock, I have another way that involves switching to TWRP recovery and restoring a rom via nandroid restore. If you'd prefer that, lemme know and I'll shoot you the links.
Click to expand...
Click to collapse
If I ever meet you I definitely owe you a drink. Did exactly as you said and everything (from what I can tell) is working.
It's one of the things I love about Android phones - unless you do some serious damage to it physically, for the most part it is fixable.
So, thanks button isn't enough - you saved me giving up and buying a new phone
*Hi Five* Glad all is well!
But yea, I do this for a living. Seriously. Helping people on here is how I stay sharp. lol
getting a gateway 504 error from link to firmware, would love to get this update working as i keep getting a notification on phone saying update available but it wont work
boneyarsebogman said:
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
Click to expand...
Click to collapse
Can you post the link of the CM 10.2 rom For huawei P2.
I search for a long long time. but still dosnt found a rom.
Thx
Sorry for digging this up but does someone have the stock ROM of the P2? Im stuck like the fella who started this thread and havent found the stock ROM anywhere.
Thanks for the attention.