Hi,
how i can use a usb ethernet adapter on any tablet?
I only have to create usb net device driver, load it and get the interface.
But now the dhcp is not working!
But why?
How can i get the adapter working with dhcp if i plug it in?
Is there a trick inside the kernel oder android 4.2.2?
PLEASE HELP!
Big big thanks
Bye
Related
From the other threads I have read, other android devices have had USB ethernet working, but they didn't go into details, as it should 'just work'. My end goal is to allow my phone to access the internet at work using a wired connection to my windows workstation running internet connection sharing.
I have a working Monoprice 100mbit USB adapter (id = 6150) using the well known linux compatible asix AX88772 chip
I have tried connecting the adapter directly, and with a powered USB hub. Same result. USB thumbdrive with hub works, so the cables all work.
I get the following dmesg pastebin.com/mdttaDmq which looks hopeful, as it detects the ASIX chipset no problem.
I ran adb netcfg while adapter connected, but there is nothing new there... pastebin.com/7nN5MY08 (shouldn't an eth0 or usb0 show up?)
I have a Galaxy S3 i747M stock 4.0.4 ICS rooted, any help would be greatly appreciated
one of the articles mentioning it just working,
http://forum.xda-developers.com/showthread.php?t=1792245
Solved my own problem since I got no hits.
http://forum.xda-developers.com/showthread.php?p=37548841#post37548841
Howdy,
I'm looking for a way, where I'm basically using an Android device as router.
My basic idea is, to have an Android device with an ethernet port (or usb-net port) and connect my PC or PC's to the ethernet port of the Android device, then tether the internet connection, that the Android device has via 3G or wireless out to be used by devices on the ethernet port.
Essentially it's like wifi or usb-tethering, but utilizing the lan-port that is build into some Android devices, like a raspberry pi, the ODroid Hardkernel board or for example Motorolas Lapdock Pro 500.
Has anyone seen a solution to archieve this ?
/M
Hi,
Are you able to include support for Ethernet Tethering in Android ?
Hi, I have a MK808 which I have connected to a usb to ethernet converter. I boot directly into XBMC, but the ethernet connection can be a little flakey. Sometimes on boot it connects to the ethernet fine but other times it doesn't and I need to go into setting and switch the ethernet off and back on and that works.
My idea is to have tasker switch the ethernet off and on just after booting so that I can be assured it would work every time, but I can't see any ethernet option in tasker does anyone know a way of doing this.
Thanks
BW
Hi People......i search a long time for an adapter, that can charge and use Usb on the Note 10.1 2014 (p600) at the same time.....no docking station do this, and all other adapters don't, cause the pins are channeled otherwise than on other devices......don't know why....but the adpater from Note Pro 10.1 with ethernet does.....but if i connect an ethernet Cable to it, nothing happens, cause (i think), Android has no Protocol to give a dhcp Adress to an ethernet device, and set the wifi Adapter off....
l found a tool for Nok 3, but I'm not sure, that will work on a P600. But on a mobile , it will not be needed as on a tablet ...
Anyone got an Idea to convert the ethernet drivers from Note Pro to the P600 kitKat ?
Sony for my ugly English
If you're rooted, this app should work: https://play.google.com/store/apps/details?id=xda.usbhost.test
I've never tried it with the Samsung branded ethernet adapter from the PRO series tablets, but I've used it in combination with an OTG cable and a generic USB to ethernet adapter, so it should work.
Thx a lot man......by the way, this is the same app, i wrote in the OP, i read about in the Note 3 Forum......i try and report
Result. ...is really strange.......the app accept the adapter, and get an ip adress...... ( it's a network Connection, coming from a router)....status gets to enabled, but i get no Internet Connection. ...strange.....i guess, Wifi have to be off. I also try to set the ip adress manually, also Router and Subnet Mask, but the same result, if i open a browser, no connection to the internet. Super SU Version is 2.02 .....any ideas?
Does anyone know of any USB Hubs without ethernet that work with the Nexus Player. I'm currently connected with the nexus player 5ghz AC and get 150megabits , so no need for ethernet. Do you guys chain a micro usb to usb cable to a hub to get this working? Products, tips and info here please. Thanks in advance
Has anyone tried this: http://www.amazon.com/gp/product/B00BWF5U0M?keywords=USB HUB&qid=1444943911&ref_=sr_1_1&s=pc&sr=1-1
dyslecix said:
Does anyone know of any USB Hubs without ethernet that work with the Nexus Player. I'm currently connected with the nexus player 5ghz AC and get 150megabits , so no need for ethernet. Do you guys chain a micro usb to usb cable to a hub to get this working? Products, tips and info here please. Thanks in advance
Has anyone tried this: http://www.amazon.com/gp/product/B00BWF5U0M?keywords=USB HUB&qid=1444943911&ref_=sr_1_1&s=pc&sr=1-1
Click to expand...
Click to collapse
I would like to know that too! Also, how did you test the connection speed on your NP?
lost2030 said:
I would like to know that too! Also, how did you test the connection speed on your NP?
Click to expand...
Click to collapse
Speed checker app. sideload the APK.
https://play.google.com/store/apps/details?id=uk.co.broadbandspeedchecker&hl=en
I use a basic 4 port USB 3.0 hub also from Sabrent (doesnt have the on/off buttons on it) and pair it with an OTG cable and it works fine. I have a wireless mouse, sixaxis or ds4 controller, and a 64GB flash drive plugged into it.