Whenever I Try To Flash The Stock Firmware On My Canvas HD ,Through Sp Tool Everything Goes Right But When I Click On Firmware>Upgrade It Gives Me Red Color In The Bar..........????
Please I Need A Quick Reply Because I Want To Have The Stock Firmware....!!!
Thanks.
Are the drivers installed properly ? Also, i suggest you upgrade your chd at the service centre (just a precaution )
Sent from my Micromax A116 using xda app-developers app
In this process the Progress bar become RED 100%,Then it shows me a screen saying "Sp Flash Tools Error : (8200), What does this means and how am i suppose to have stock firmware....???
Yes it shows to me as well
Sent from my Micromax A116 using xda app-developers app
Which version of SP tools are you using? I had the same issue but it got fixed when i used the latest supported SP tools. Try this one-
http://www.mediafire.com/download/ux2o75c4g91upfr/MTK6589_SP_Flash_Tool_v3.1304.0.119.rar
Use at own risk. I will not be responsible.
Latest Version of Flash Tool :
SP Flash Tool v3.1312.0.139
Related
Using Flash Tools to Flash Stock ROM to A116
Requirements:
Stock ROM
Flash Tool
A computer
A Micromax A116 (obviously)
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Changelog:
Software release notes
1. With a fix of unable to install Flip board application.
2. With a fix of auto rotation issue.
3. Live wallpaper is integrated as a option for user to set as manual.
4. M! Store application is removed.
DOWNLOAD PACKAGE:-
mod edit
SP Flsh tools:-
http://www.mediafire.com/?7ccl2tw67tklxdk
Drivers:-
http://www.mediafire.com/download.php?nv96xclhjmaiclu
Re: Micromax A116 New Stock Rom
Reserved
plz bro make it quick waiting eagerly
Re: Micromax A116 New Stock Rom
harsha13bm said:
plz bro make it quick waiting eagerly
Click to expand...
Click to collapse
Hey u can use mmx ftp as of now bcoz of my slow speed upload will complete by morning
Sent from my unknown using xda app-developers app
Sorry to ask a noob question, but what do you mean by step 2, particularly extract the stock ROM folder..
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
Thanks
Haroon
Re: Micromax A116 New Stock Rom
harryrasul said:
Sorry to ask a noob question, but what do you mean by step 2, particularly extract the stock ROM folder..
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
Thanks
Haroon
Click to expand...
Click to collapse
It means extract the download package i have provided above and replace recovery.img with cwm recovery provided
Sent from my unknown using xda app-developers app
Re: Micromax A116 New Stock Firmware
Is it v2 of stock ROM......
Sent from my Micromax A116 using xda premium
Re: Micromax A116 New Stock Firmware
junaid992 said:
Is it v2 of stock ROM......
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
Yup
Sent from my unknown using Tapatalk 2
Re: Micromax A116 New Stock Firmware
I already had got it preinstalled.....
Thanks....
Sent from my Micromax A116 using xda premium
will there be a GPS fix for this.. may be in next version?
new stock update.....MMX_0.20_flasher_user
kashy said:
will there be a GPS fix for this.. may be in next version?
Click to expand...
Click to collapse
in april lastweek new update MMX_0.20 released ,what are the new features in it???
a sharma
sharing is power
After flashing the rom the handset is unable to detect the 32K SIM. tried swapping the SIM but of no use. Any idea.
Thread closed due to GPL violation
I HVE USED ALL ROMS WHICH ARE AVAILABLE FOR CANVAS HD.I TRIED EACH ONE.WHEN I BUYED MY PHONE BLUETOOTH SENDING AND RECIEVING is working perfectly .. BUT after A MONTH i flashed every rom....
Now i am facing problem in sending files from android to another android(working for nokia phones : that means no hardware isssue)tried stock still same cant send files ......are u all facing the same??
if not ...still u know the solution plzz help me and reply.......'experts plzzz reply devs,,,,,
:crying:
If you can't send files please reboot the device. It might be work.
Sent from my Micromax A116 using XDA Premium 4 mobile app
sonymax2408 said:
If you can't send files please reboot the device. It might be work.
Sent from my Micromax A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AS i SAID i am not a noob i tried this everything.....
any hve solution plzz reply
Sending files via bluetooth
Use only unmodified system apps (of the ROM you flashed) to send files and they will work most of the time.
I am trying to help, but I am not sure it will fix the your issue. before doing anything take a full backup including internal storage.
method 1 : flash old stock ROM 4.1.1 using SP tools
method 2: this is highly risk.. before do this take note IMEI, WiFi and bluetooth mac address.
in sp tool format your phone, so it will wipe everything and install rom using sp tool.
restore IMEI and Mac address using sn writer tool.
method 3 : go micromax service centre
To all DEVs
Can we port this to our MMX clone Note 3 with Jelly Bean 4.3 :victory:
Original and latest firmwares can be found here http://forum.xda-developers.com/showthread.php?t=2460126 :victory:
Is it really 4.3 or just a build.prop edit? Before porting it is necessary to confirm.
Sent from my Micromax A116i using XDA Premium 4 mobile app
rajneeshk said:
Is it really 4.3 or just a build.prop edit? Before porting it is necessary to confirm.
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just a build.prop edit!!
Edit : I have same for MT6572 but after taking bacup via MTK root and tools if you try to flash the same backup via SPFlash tool then the AOSP will come up in launcher and lockscreen just a themed version of AOSP and have same with an I9500 ditto copy. but after flashing I9500 same with SPflash tool and running a code it turns the boot image and other things as of samsung.
is0l4ted said:
Just a build.prop edit!!
Edit : I have same for MT6572 but after taking bacup via MTK root and tools if you try to flash the same backup via SPFlash tool then the AOSP will come up in launcher and lockscreen just a themed version of AOSP and have same with an I9500 ditto copy. but after flashing I9500 same with SPflash tool and running a code it turns the boot image and other things as of samsung.
Click to expand...
Click to collapse
Did u download the ROM and confirmed it ???
Sent from my A250 using XDA Premium 4 mobile app
I have the same clone with MT6572 chip but describing it as a Qualcomm Chipset which is fake. Have a backup of such you want it??
Note : after taking backup and flashing again with spflash tool I lose Samsung Touchwiz UI, lockscreen and boot animation trying hard to get back will give it a shot with your provided ROM in OP. is it for MT6589 the ROM in OP?? or MT6572??
Hello friends, I wanted to ask , is there any full rom which can be flashed by stock recovery. bcoz a friend's A116 is not starting and is not on custom recovery. worse, the USB jack is also not working. but stock recovery is accessible. The phone is in bootloop while installing some fonts. Data wipe is not working.
Can we create some update zip like OTA and install??
shivrajsingh said:
Hello friends, I wanted to ask , is there any full rom which can be flashed by stock recovery. bcoz a friend's A116 is not starting and is not on custom recovery. but stock recovery is accessible. The phone is in bootloop while installing some fonts. Data wipe is not working.
Click to expand...
Click to collapse
nope u cant install /rom s in stock recovery
so u can use sp tools to flash a custom ROM u ll get al tht s needed frm the GENERAL SECTION
and thhn u can flash a custom ROM as u please :good:
jayadu said:
nope u cant install /rom s in stock recovery
so u can use sp tools to flash a custom ROM u ll get al tht s needed frm the GENERAL SECTION
and thhn u can flash a custom ROM as u please :good:
Click to expand...
Click to collapse
Sorry, forgot to mention that USB jack is not working. So we cant use SP tools.
shivrajsingh said:
Sorry, forgot to mention that USB jack is not working. So we cant use SP tools.
Click to expand...
Click to collapse
Wht do u mean by not working
Is the device being charged while plugging in?
If so thn the drivers wouldn't hav been installed properly
Just reinstall it Nd it should work
Sent from my Micromax A116 using XDA Premium 4 mobile app
jayadu said:
Wht do u mean by not working
Is the device being charged while plugging in?
If so thn the drivers wouldn't hav been installed properly
Just reinstall it Nd it should work
Sent from my Micromax A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The drivers are installed properly. PC is detecting my A116 as mtk preloader in device manager, but my friends A116(bricked) is showing unknown usb device.
shivrajsingh said:
The drivers are installed properly. PC is detecting my A116 as mtk preloader in device manager, but my friends A116(bricked) is showing unknown usb device.
Click to expand...
Click to collapse
did u try it in factory mode??
jayadu said:
did u try it in factory mode??
Click to expand...
Click to collapse
Yes, it didnot help. I was wondering, xolo q1010 updated from 4.2 to 4.4 through flashable zip. Can't we create stock recovery based full rom? It will help many others also.
Hello experts, i think its softbrick, i m using intex aqua i5 mini (i know its chinese) and i have changed bootanimation,and when i rebooted my device, the animation appeard bt i m not able to use my device. It stuck on sony erricson logo. Now plz tell me what can i do, 
My device is rooted, and i m on stock ROM. And phone is still in warranty.
I m able to get into recovery menu,but cant flash any update.zip file, bcoze my phone dosent have custom recovery, and whenever i tried to flash aroma file manager an error appear "installation aborted"
Cryin...crying...crying 
Plz help me out....
Sorry for my bad english......
Jamil69 said:
Hello experts, i think its softbrick, i m using intex aqua i5 mini (i know its chinese) and i have changed bootanimation,and when i rebooted my device, the animation appeard bt i m not able to use my device. It stuck on sony erricson logo. Now plz tell me what can i do, 
My device is rooted, and i m on stock ROM. And phone is still in warranty.
I m able to get into recovery menu,but cant flash any update.zip file, bcoze my phone dosent have custom recovery, and whenever i tried to flash aroma file manager an error appear "installation aborted"
Cryin...crying...crying 
Plz help me out....
Sorry for my bad english......
Click to expand...
Click to collapse
You'll have to factory reset using some leaked stock ROM for your phone off the internet. Data will be erased in the process. If you can still access your file system back up the stuff you don't want to lose. Go to this link http://androidxda.com/download-intex-stock-rom-models and find your phone model. Click the download button for it to get your stock ROM, then click the blue instructions hyperlink to read how to flash it. This will put your phone back to factory settings. Just an important thing to note, I have never tried those stock ROMS or the flash tool in the instructions so do this at your own risk.
Hmmm, thanx for your advice, i will try it tomorrow and let u know. Many thanx
Sent from my GT-I9500 using XDA Premium 4 mobile app
I have a nandroid backup in my sdcard, but i dont know how to flash it. Nandroid backup is in tar file formate.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Jamil69 said:
I have a nandroid backup in my sdcard, but i dont know how to flash it. Nandroid backup is in tar file formate.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
HOLD THE FACTORY RESET IDEA. I have found something that might help you restore your Nandroid backup. Unfortunately it involves using command prompt. This guide explains pretty clearly what to type and everything. If there is any part of this guide you don't understand, post a reply or send a message. http://www.modaco.com/topic/299479-howto-performing-a-nandroid-restore-manually-using-adb/. But before you do this you might want to follow this guide to know how to install the android debug bridge tools. http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
Thanx man, flashd the stock ROM, now everything is fine, thanx… thanx… thanx…
Sent from my Aqua i5 mini using XDA Premium 4 mobile app
I have also the same problem of bootloop .. I have karbon a1+ douple android 4.2.2 jelly bean . i have also download rom android xda and sp flash tool
How to install rom from recovery
Sent from my Karbonn A1+ Duple using xda app-developers app