I am a Task noob and am experiencing issues with a few profiles.
1. Wifi turn on when I connect to a specific cell tower for home and
2. inverted for when I leave home
3. The same for my work.
The issue is when I leave home it turns the wifi off, when I get to work it turns on but Wifi is turned back off because number 2 is still enabled.
Related
I tried to enable this feature in KaiserTweak and although it says the wifi is still on, it often cuts out and then does not function properly until I do a soft reset. Does anyone have a solution for keeping the wifi on during standby that works a little better?
Thanks!
DCD3.2.2
Radio 3.42.02
Pocket Toolman has that feature and it works.
I tried it and it appeared to be working for awhile but I've noticed that if I press the power button to put the phone into the standby when I resume the wifi says it is still connected but is in fact no longer functioning. All my internet-enabled applications disconnect and the browser doesn't work. Even when I move out of range of my access point the same access points remain in the available networks list. If I turn my wifi on and off and try to connect to another access point it never connects and an error pops up saying so. The wifi doesn't work until I do a soft reset.
If I do NOT enable the option to keep wifi active during sleep then all my internet-enabled apps disconnect when the phone is put in standby but the wifi continues to work properly when I resume the phone from standby...
I am running phoneAlarm. Could this cause some issues with it?
My current profile is set as "Do not change" for wifi though so I wouldn't think it would cause any issues...
First off, I'm having problems with Wifi connections. My atrix seems to only be able to connect to Wifi the first time I connect to a network. Everything works fine but if I turn off Wifi or leave range I have to forget the network and reenter the info to connect again. Any ideas?
Another question, not sure if it has been answered already, but is there any way to remove the atrix signature when sending emails? Thanks in advance.
Sent from my MB860 using XDA App
For the wifi problem, make sure that you have the setting to never sleep; I think by default it comes with sleep when the screen turns off.
For the signature issue, go into the gmail app, hit the menu button, go into settings, and I'm sure there is an option in there to change the settings.
Here's the outline of the problem:
I'm able to use the wifi to browse the internet and whatever. I turn the screen off and wait maybe half an hour. When I turn it back on, it says it's still connected to my wifi network, but I can't go to any websites. When I look at my Elixir widget, I see that the signal strength is 0%. The only way to fix it is to turn off the wifi and turn it back on, since there's no disconnect button.
Does anyone else have this problem, and is there a solution?
It's like the phone is half asleep and was about to disconnect from the wifi network, but stopped somewhere in the middle.
Seems to be a major problem for a select few on gingerbread roms. I suffer from it on DSC 0.65. A workaround for it is to use WiFi Reassociate (free on the market). For more information look here:
http://forum.xda-developers.com/showpost.php?p=19429208&postcount=360
Connected to home network, I keep the wifi on my S3 on all the time and it seems to be connected (from the icon in the top bar) but there is no data connectivity.
I have to manually switch wifi off then back on for the internet connection to start working again. This is the case after waking the phone up, and also just when the wifi has been on for longer than a few minutes even when the phone is in use.
Keep Wifi on during sleep is set to ALWAYS.
Does anyone know if this is a common s3 problem or is it specific to my device, and are there any fixes?
Thank you.
uzzy said:
Connected to home network, I keep the wifi on my S3 on all the time and it seems to be connected (from the icon in the top bar) but there is no data connectivity.
I have to manually switch wifi off then back on for the internet connection to start working again. This is the case after waking the phone up, and also just when the wifi has been on for longer than a few minutes even when the phone is in use.
Keep Wifi on during sleep is set to ALWAYS.
Does anyone know if this is a common s3 problem or is it specific to my device, and are there any fixes?
Thank you.
Click to expand...
Click to collapse
Hello,try this:
dial *#0011#, press menu button then selected WIFI .
Press the off /on buttor for disable the wireless power saving.
Django8989 said:
Hello,try this:
dial *#0011#, press menu button then selected WIFI .
Press the off /on buttor for disable the wireless power saving.
Click to expand...
Click to collapse
Thank you for your reply,
I have now swtiched wifi power saving OFF.
Hopefull this will solve the issue
Still not working...
Sorry to drag this up again, but this hasnt worked for me..
Has there been another solution since??
My wifi doesn't automatically connect when a known wifi is in range unless and until I turn the screen on. Means when it's sleeping, it won't connect to any known wifi. If its already connected to a wifi network and if the screen is turned off after that, it stays connected. But lets say power goes off and wifi disconnects because of turning off of the router. When power comes back, and router is automatically switched on, the phone doesnt reconnect automatically when in standby. It connects immediately as soon as I switch on the display. Wifi scanning, keep wifi on during sleep and all those options are enabled. But it still doesnt automatically connect to any known wifi when in standby...I have to turn on the display for that.
Any solutions?
Same issue on lg g3 and xperia z2
nilanko said:
My wifi doesn't automatically connect when a known wifi is in range unless and until I turn the screen on. Means when it's sleeping, it won't connect to any known wifi. If its already connected to a wifi network and if the screen is turned off after that, it stays connected. But lets say power goes off and wifi disconnects because of turning off of the router. When power comes back, and router is automatically switched on, the phone doesnt reconnect automatically when in standby. It connects immediately as soon as I switch on the display. Wifi scanning, keep wifi on during sleep and all those options are enabled. But it still doesnt automatically connect to any known wifi when in standby...I have to turn on the display for that.
Any solutions?
Click to expand...
Click to collapse
I am having the same issue on my LG G3 d855 and Xperia Z2 with latest cm12.1 nightlies. When my phone's screen is off and I am connected to my home wifi. If I go out of my home and to a nearby friend's home. My phone does not automatically reconnect to my friend's wifi (which is known to my phone). If have to switch on my screen and wait a few seconds to reconnect.
nilanko said:
My wifi doesn't automatically connect when a known wifi is in range unless and until I turn the screen on. Means when it's sleeping, it won't connect to any known wifi. If its already connected to a wifi network and if the screen is turned off after that, it stays connected. But lets say power goes off and wifi disconnects because of turning off of the router. When power comes back, and router is automatically switched on, the phone doesnt reconnect automatically when in standby. It connects immediately as soon as I switch on the display. Wifi scanning, keep wifi on during sleep and all those options are enabled. But it still doesnt automatically connect to any known wifi when in standby...I have to turn on the display for that.
Any solutions?
Click to expand...
Click to collapse
I have the same issue with the aosp 5.1.1 rom
Sent from my Moto E using Tapatalk
Same issue with Galaxy S3 LTE, CM12.1
Are you guys using any custom kernel?