XNovaThor Project
About:
This rom bases on the most current Android (4.1.2) Open Source Project repo That is what makes it special comparing to other custom JB roms like AOKP or CyanogenMod. This rom is fully AOSP, without stuff from AOKP or CM. Don’t even ask if i could add theme engine, custom lockscreen or other crap. Using clean rom we can reach 200mb of free ram without any task killer on board.
Working
RIL
Mobile Data
WiFi
USB tether
GPS
Leds
Audio
SD Card (internal storage)
App2SD
MTP & USB Mass Storage
Sensors
Vibrator
Project Butter
Bluetooth
Camera with camcorder
Torch
Youtube HQ
CPU sleep mode
OMX -> Hardware Decoders / Encoders
Gapps included
Added some apps (Apollo, DSP Manager, CM FIle Manager)
Known Issues
native WiFi Tethering
Fm Radio
Downloadhttp://d-h.st/czy
Instruction
wipe data, cache, dalvik-cache
flash rom via recovery
reboot and voila!
TIPS for performance!!
disable auto brightness
disable dial pad touch sounds
CreditsFXP
smileydr0id
Screenshots
Hi devswift I see some bugs on this rom is similar with your rom b4 (rom nightly TeamCanjica cyanogen 10.1)
But can you check again on KNOWN ISSUES list ? Xperia go doesn't have front camera, do you?
I'll download your great rom soon buddy
Hopefully this rom works perfectly for novathor device
Does this rom work with "Phantom Kernel"?
Can someone give us screenshot of "AnTuTu Benchmark" result?
What about battery life?
xGO dont have Frontal camera
Installation impossible, hang on (Error 7):
assert(getprop("ro.product.device") == "ST27i" || getprop("ro.build.product") == "ST27i" ||
getprop("ro.product.device") == "ST27a" || getprop("ro.build.product") == "ST27a" ||
getprop("ro.product.device") == "lotus" || getprop("ro.build.product") == "lotus");
After removing these lines from updater-script installation work and XGO boot without any problems.
ook i'm testing this AOSP rom... i din't have problem with installation.
first of all it's very fast and stable, free ram for me it's about 195 mb
I tried to flash Phantom Kernel but it doesn't boot (well i know that phantom it's for stock jb, but i tried anw )
For who like simply and clear roms, this is perfect!
And now for who ask for that antutu screen :good: not bad : 7370
Thanks a lot DevSwift1 for this one!
EDIT:
battery is good after 3/4 hours.
Only two things:
1) Wi fi switch off when the screen goes off
2) game crash (for now i tried only with candy crush saga lmao yeah i play that game )
Found Bugs:
Installation (see previous Post)
Location Service not working (Maps, Google+ and so on) (GPS-Location work)
Google Calendar not syncing (fixed by flashing gapps)
no novathor logo (kernel has freexperia logo and rom android)
No mobile Data (APN created by system on 1. boot and work but after 2. bot the apn ist deleted and i couldn´t create one)
Gesendet von meinem ST27i mit Tapatalk 4
thankss bro work great
thank's for sharing your work, but this ROM works in Stock Kenrel [LB]?
Hi devswift1, can u make this for locked bootloader? I install it and after install i flash stock kernel, but it begain but can't boot. It's not bootlop. do u know what i mean?
Try it a few day rom so fast but the batt so bad ..hope this will fix it after this tq
Sent from my ST27i using Xparent ICS Tapatalk 2
exelent rom to use in my xperia go bl unlocker thanks :d ..the only problem is not seeking q mobile networks :/
im tired searching for jb rom with no call lag
is this rom have call lag problem ????
one more q??
im using cm10 fxp234 can i flash it without change kernal
Battery drains too much. Not even a half day it holds energy.
Can you see whats draining?
Cpu usage?
gps not working
:/
Try GPS fix it does work it just takes a long time to find all satellites
Sent from my Xperia Go using xda app-developers app
@munjeni just a request as I see your looking at cm10.1 I've run that ROM with little success now using this ROM its close to done just a few bugs dialer hanging although I don't think its the dialer apk because viber does exactly the same thing its fine if you reboot the phone but after a few hours use dialer goes back to hanging an incoming and outgoing calls ( before any asks yes I turned off auto brightness and dialer sounds .
GPS takes forever to lock on gpx fix apk helps but still 15 + minutes to lock on.
Don't have a front camera to mess aout with
Sent from my Xperia Go using xda app-developers app
Our device is not designed for Cm, simple we will never get any cm rom full working! Qcom is device for development, Novathor is not! I looking for new phone but still waiting for best buy, no want to buy something like Novathor, must double chech before I buy new phone
Just to inform you, got CM10.2 booted! UI have error popup mesage, thats all. No usb adb so unable to debug problem. But good thing is audio is working without STE things so really strange audio is working!
I am realy sad about Novathor things, realy love my Xperia Go, its perfect phone with perfect size, but I can not get CM working in our device without source code, realy sad thing STE no want to give us source code for camera, audio, adm...etc, realy sad
Planing to buy Xperia ZL but since I not like big phones I realy have no idea which one phone to buy. There is no high end phones with 3.5 inch dispaly Do you have idea?
Related
Hi people,
I hope this can help those who ask some common questions in all threads or just don't read the OP or the OP hasn't Q&A, so let's start.
Q: How to enable the developer options on CM10.1/10.2?
A: Settings>About phone> click 7 times on Build number.
Q: Where can I find gapps?
A: Here.
Q: The call volume is too low, why?
A: This’s a known issue not only in Xperia phones but in the most 4.1.x & 4.2.x roms on other phones. Anyway, check your baseband. If you are not using the newest, update it here: How to Install JB, ICS or GB on Xperia™ Smartphones, as well as root them.
Or/And: Decreases the volume and increase it during a call.( this tip works for me, I'm using BB.77 but should work with other basebands too).
Q: My camera doesn’t work properly, 720p still has low quality, blablabla… why?
A: Because Sony doesn’t release JB camera libs for Sony Xperia 2011 phones, so you can wait till any developer make some kind of magic or sign this petition: "JB Camera libs for all Sony Xperia 2011 Phones".
Q: Why my Wi-Fi doesn't work?
A: Before reporting that it doesn't work, use the kernel (boot.img) inside the rom (.zip).
Q: How to enable the pie controls & navigation bar?
A: First you need a file explorer, then add this line qemu.hw.mainkeys=0 to /system/build.prop & reboot the phone to activate the on screen buttons (Navigation Bar). Then go to Settings>System>Power menu>Expanded desktop & activate it & then you will see pie control in the Settings>System menu.
Q: How to enable lockscreen rotation?
A: First you need a file explorer, then add this line lockscreen.rot_override=true to /system/build.prop & reboot the phone to take effect.
Q: How to disable buttons backlight? (This's only for JB 4.2.2 old releases)
A: First you need a file explorer, then go to /system/etc & edit the hw_config.sh file like that:
# LMU AS3676 Configuration
dev=/sys/devices/i2c-0/0-0040/leds
echo 500 > $dev/button-backlight/max_current
Change the value to:
# LMU AS3676 Configuration
dev=/sys/devices/i2c-0/0-0040/leds
echo 1 > $dev/button-backlight/max_current
After editing, save the file & restart your phone to take effect.
This new method is for Mike's CM10.1 rom (04/06/2013 & 17/06/2013 builds) or other roms based on his rom:
First download this file & then, using a file explorer, copy the file to /system/etc/init.d & set permission to rwxr-xr-x (0755), then restart your phone to take effect.
Thanks to AndyYan
Q: While flashing a rom I get "status 7" error, how to fix it?
A: This happens because you have probably wiped the system. See here how to fix it.
Q: My compass doesn't work correctly with Google Maps, Google Earth, etc. How to fix it?
A: Try this. First you need a file explorer, then go to /system/etc/sensors.conf. If by default is like that:
#Setup AKM897x axis
ak897xorientation_axis_map = 0,1,2
ak897xorientation_axis_sign = 1,1,-1
ak897xmagnetic_axis_map = 1,0,2
ak897xmagnetic_axis_sign = -1,1,1
Then change the values to:
#Setup AKM897x axis
ak897xorientation_axis_map = 0,1,2
ak897xorientation_axis_sign = 1,1,-1
ak897xmagnetic_axis_map = 0,1,2
ak897xmagnetic_axis_sign = -1,-1,1
Caution: Create a backup of your default sensors.conf file & after editing, restart your phone to take effect.
Thanks to mmhasanovee
Q: How can I help the development of any ROM?
A: Not with, "+1", "FC", "me too", "same bug here", blablabla. These comments are useless.
Q: So, how can I really help?
A: Simple. Remember doing this you're helping the developer & yourself, you're intelligent, so you understand what I'm saying, right!?!
Do that in the right ROM thread:
Phone model:
Baseband version:
ROM version:
Did you?
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using?
a task killer:
the kernel (boot.img) in the zip or other:
Settings/Performance settings (other than default):
What steps will reproduce the problem?
But the most important thing is this: attach a LOGCAT of the problem.
Q: Ok nice, but I’m noob & I don’t know how to LOGCAT, where can I learn?
A: Here, here or stop being lazy & search in XDA forums.
Battery Saving Tips Here
Thanks to Rirozizo
CM10.1/10.2 ROMs
★ MDPI DEVICES ★
Xperia Mini (Smultron) - Mini Pro (Mango) - LWW (Coconut) - Active (Satsuma)
SEARCH HERE
★ HDPI DEVICES ★
Xperia Ray (Urushi) - HERE
Xperia Neo (Hallon) - HERE
Xperia Neo V (Haida) - HERE
Xperia Play (GSM-Zeus/CDMA-Zeusc) - Xperia Neo L (Phoenix) - HERE
Xperia Arc (Anzu) - Arc S (Ayame) - Pro (Iyokan) - HERE
Special Thanks to:FXP Teammikeioannina[URL="http://forum.xda-developers.com/member.php?u=788040"]nobodyAtallM66B[/URL]shufukingpcfightercm42semc TeamSteph310XDA Developers
Thanks for reading & hope this helps you in anyway
Bump..
Sent from my GT-S5660 using xda app-developers app
just a suggestion...
i hav a suggestion for adding one more question wich is commonly asked to ur thread...:fingers-crossed:
u could add info about the status 7 error and how to overcome it...as many ppl (including me lol) keep asking this question...
just my suggestion its upto u to add it or not....
Added
Thank u for mentioning my name after the question but pls remove it...cos i only gave a suggestion for the question nd i dint give any solution for that...
OK, thanks to Google and his awesome update of Ingress, we can't use compass fix for it
At least at GMaps still working.
Hey mate
The status 7 error can be solved easily.
U can jst remove device checking lines from updater script of rom . And then flash it. Rom zip wil then flash without issues.
Sent from my Xperia Neo V using Tapatalk 2
battery drains like hell
i m running XS Katana rom with provided mike kernel in the zip on lww....every thing seems to work great ...but battery drains at a rate of 1%/min......please help me ......soon:crying:
@mauam How to make this thread a sticky?
Really need some bad ass appreciation for accumulating all FAQs under one shelter!
Added new method to disable backlight buttons, on Mike's CM10.1 rom or roms based on his rom. Thanks to AndyYan.
big problems
Many peoples said if using jellybean 4.2.2 rom with kernel 2.6.x.x have problems wifi and bluetooth cnt turn on (on mdpi 2011 devices). By the way, on my mini pro with 4.2.2 dark demon rom and 2.6.x.x kernel no problems i found, even wifi adhoc can detected . Maybe im lucky :angel:
Added "How to enable lockscreen rotation".
need walkman mod
Is there any proper working walkman mod for this ROM??
RAM issue
Hi there,
I have SE Neo Mt15i.
I am using this ROM for the last 2 days. No problems at all. Everything is working.
Kernerl from ROM.
Battery - acceptable.
But RAM is awful. In running apps its always jump from 0-50Mb free [email protected]#?
Check the attached screenshots? Why is that?
Thank you.
Sokki
Hi cyberdejy,
Which rom are you using? I'm using Mike's LX rom & I get 140~170 free ram, I use greenify app too.
Lock screen customization not work well.
Can you give me a description of shell.apk, please?
Hi @mauam. A lot of people are asking about wifi not working on mike's LX ROMs, because they don't flash the kernel included in zip. Can you add this question to your FAQ? Something like Q: "Why is my wifi not working?" A: "Flash the kernel(boot.img) included in zip file"
Thanks
Poslano iz mojega Xperia Mini Pro s pomočjo Tapatalk 4 Beta
kv1dr said:
Hi @mauam. A lot of people are asking about wifi not working on mike's LX ROMs, because they don't flash the kernel included in zip. Can you add this question to your FAQ? Something like Q: "Why is my wifi not working?" A: "Flash the kernel(boot.img) included in zip file"
Thanks
Poslano iz mojega Xperia Mini Pro s pomočjo Tapatalk 4 Beta
Click to expand...
Click to collapse
Added
FM Radio
May I know is there any way that FM radio can be use?
I'm using this ROM on Xperia mini(st15i); though there is fm radio app it won't work even I change the kernel to LuPuS. Please tell me a way to fix the radio!!!
chamara1112 said:
May know is there any way that FM radio can be use?
I'm using this ROM on Xperia mini(st15i); though there is fm radio app it won't work even I change the kernel to LuPuS. Please tell me a way to fix the radio!!!
Click to expand...
Click to collapse
I don't own the xperia mini anymore, but try this radio app. Or use the default kernel instead lupus. Happy holidays
DISCONTINUED
Sorry, I just sold my phone, and I can't develop for it anymore. I will keep these threads for you guys until something better will occur, but I will have some trouble to solve the problems. Thank you for all appreciations.
-- If this will help, you can still say thank you -- press the Thanks button! :good:
For those who are fans of MIUI, this is the closest thing. MIUI announced already that they will not support dualsim phones. But two of its "children", LewaOS and Baidu CloudROM are targeting that niche. LewaOS it's more suitable, but they didn't released a ROM for this phone... yet. Baidu did, but their ROM is focusing on China market - all farmework, and proprietary apps are filled with references to China locations, zones, codes, telephony operators, etc. I tried to build a ROM from LewaOS OpenBuild source, but unfortunately that is for gingerbread (the one from github).
I took last Baidu ROM, 32, and I made a version most in English. I put there and Morelocale apk for extra languages, but ICS 4.0.4 platform has only 16-18 languages.
Features:
- like any MIUI or LewaOS ROM.
- there are a lot of settings, and gadgets
- I removed non-important apps, integrated Google Apps
How to install:
- download the ROM zip
- delete from sdcard the well known three folders: .android-secure, Android, LOST.DIR
- in bootloader flash attached baiduboot.img
- in recovery do a full wipe
- in recovery install ROM zip from sdcard
- reboot, and wait for first boot. It will start with google setup wizard.
- do all the settings you want
- Here you go! Done!
If you choose to try this ROM, I assume that you know what you are doing, and I am not responsible if you brick your phone.
Download
1. HTC Desire V Baidu CloudROM v32 Max flavor v3 Deodexed
2. HTC Desire V Baidu CloudROM v32 Max flavor v3 Odexed
UPDATED to Version 32.
On first run it will be a big clock-weather widget on home screen - just drag it to upper margin to delete - it can't be removed for good since it is related to three jars from framework, only from screen. I did removed baidu weather because it was very limitative (only few cities from around the world), but I integrated Android weather which is much better.
Then, delete all shortcuts you don't want on any screen.
To remove the chinese bulletin from last screen on left, press menu button on home (the one with last open apps in stock ROM) and select home settings, then in opened menu scroll down to the last line and uncheck it - see the last screenshot.
To see last opened apps press and hold home button.
To set names and other things to each SIM, in DualCard settings menu, press the SIM number (22601 or 22610) and make those settings in newly appeared menu.
And, so on... you have to find by yourself how this ROM works, because are too much to talk about its settings.
carliv, nice work but any questiones .
support rom update OTA?
Version 29 i had trouble with location , support Version 31 location?
Version 29 exchange conection failed , support Version 31 exchange?
i am glad for your replay, Thanks.
alien1947 said:
carliv, nice work but any questiones .
support rom update OTA?
Version 29 i had trouble with location , support Version 31 location?
Version 29 exchange conection failed , support Version 31 exchange?
i am glad for your replay, Thanks.
Click to expand...
Click to collapse
I don't think it will support update OTA, because we don't use Baidu recovery, and the ROM is striped out. But I will make a new version for new ROM (32, 33... and waiting for v5 stable).
Location worked fine for me, it will ask you first to update some data from market, and after that all good.
I don't know about Exchange, I didn't tried it, I don't use this ROM currently (I use my senseless version), because I don't really like MIUI.
If LewaOS will release a ROM for this phone, maybe I will try it, because from what I've seen on other phones, it's a very stable and fast Android OS, and is not so much oriented for china market like Baidu.
I made this ROM because there are some people who wanted an English version.
Carliv, thank´s for your replay.
oky we will look forward .
I use at the moment your ROM HTC T328W -supercharger-Sense 5 . This ROM is great i´m happy with this. thank you very match for this work!!!
Kind Regard,
alien 1947
hi
i installed this rom.it is lovely smooth and really ell done,some bugs here and there but non major and can live with them.plz carry on development.this is a very good step to maintain this thread.we need it.
thnx dude.
im so greatful for the new update.im now downloading and will install tomorow and give my feed back soon.i am very thankful for the efforts and hope you carry on.we have to make alot to make this thread a life and ask every one to keep it a life with them subscription and replayes.
you welcome
new version in chinese
http://bs.baidu.com/platform-rom/102/T328W/T328W_102_20130906161712.zip
from here
http://bbs.rom.baidu.com/download.php?phoneid=16
New October Chinese Version
http://bs.baidu.com/platform-rom/102/T328W/T328W_102_20130922154026.zip
website
http://bbs.rom.baidu.com/download.php?phoneid=16
You can install Chinese Recovery by using Desire_V_All-In-One_Kit_v1.0
then flash the chinese version by pushing second option of Chinese recovery, then second option, after that forse restart.
You can go back to English recovery and do your Backup\Resore anytime.
Here is version 39 beta public test
http://bbs.rom.baidu.com/download.php?phoneid=16
its getting smarter.
yes. working great!
got errors with traffic monitoring. any experience with that? my Chinese aint that good
I am guessing you desire v lang in Eng now, so U souldn't have problrm in dealing with any part of the system.
version 40
http://bs.baidu.com/platform-rom/102/T328W/T328W_102_20130823115452.zip
the rom is working smoothly.... except for one "little" thing:
THE PHONE!!! is not working
it crashes as soon as I try to start a call or receive one
WTF
does someone experienced my same problem?
perhaps the rom is for the dual-sim phone HTC Desire V?
I've no problems with the Baidu rom v40
Im running the Baidu rom for months now
Lt-MajorTom said:
perhaps the rom is for the dual-sim phone HTC Desire V?
I've no problems with the Baidu rom v40
Im running the Baidu rom for months now
Click to expand...
Click to collapse
i didn't refresh the signature but I have the DESIRE V
where did you get the V40 rom?
from here
http://bbs.rom.baidu.com/download.php?phoneid=16
Install Baidu build 40 but how?
almozaffar,
Could you please share with me how you installed build 40? What boot or recovery image did you use? I really want to install Baidu ROM on my Desire V due to its slick design, speed and stability.
this method:
mr.wasssup said:
Need to remove lines:
Code:
assert(getprop("ro.product.device") == "t328w" ||
getprop("ro.product.device") == "T328W" ||
getprop("ro.product.device") == "primods" ||
getprop("ro.build.product") == "t328w" ||
getprop("ro.build.product") == "T328W" ||
getprop("ro.build.product") == "primods");
at the beginning of updater-script, which is located on the folder path META-INF\com\google\android.
To open Baidu ROM use WINRAR, to change updater-script use Notepad++ with exposed coded 'UTF-8 (without BOM)'
Put the modified updater-script in the archive with the replacement of original.
Do not unpack or repack Baidu ROM archive!!
Click to expand...
Click to collapse
carlo.edmon said:
almozaffar,
Could you please share with me how you installed build 40? What boot or recovery image did you use? I really want to install Baidu ROM on my Desire V due to its slick design, speed and stability.
Click to expand...
Click to collapse
very easy:
1-get this tool Desire_V_All-In-One_Kit_v1.0 from xda http://forum.xda-developers.com/showthread.php?t=2077774 and unpack it in "Android" folder in Drive C of your laptop
2-put your Desire V in Bootloader then plug it in, assuming you already installed the necessary drivers
3-click "Desire V.exe" from above tool
4-unpack your Baidu version then take "boot and Recovery" from it and copy them to "windows" folder of Drive C
5-click on "flash a kernel" from that exe then take "boot" from those two file you've got from Baidu pack. now you get the Baidu Boot.
6-, Unplug, reboot gadget into Bootloader again
7-click on "flash your recovery" then pick up the Baidu recovery you had
8-when done boot into recovery wich will be in chinese. Don't panic, bu using Volume button down, pick up the second choice by pressing Power Button, then the second choice which will take you to your SD where you put the latest Baidu ROM, now press Power Button to install it. when done, press Power Button continuasly intil rebooting. wait for complete startup, then get into your Settings to change language into Englsih.
9-here is the latest version 41
http://bs.baidu.com/platform-rom/102/T328W/T328W_R_2.1.41.121_102_2013-12-29_22-44-02.zip
Enjoy
Here is my port of CM11 to SM-P600, a.k.a lt03wifi. Source was almost entirely derived from the official source for SM-T520 which has almost the exact same hardware.
What works:
screen
wifi
bluetooth
logcat
usb otg storage
sound
microphone
multitouch
auto brightness
external sdcard
gps
softkeys
softkey backlight
flashlight
accelerometer
gyroscope
magnetometer
light intensity sensor
pen (without fancy Samsung menus of course)
both cameras
What doesn't work:
nothing as far as tested
Issues:
performance cpu governor causes sleep of death
stock cm camera app issue (see post below)
Links and how to install
Download link
ODIN flashable recovery
You won't be able to install it via TWRP for SM-P600, it will be complaining about the device name not being lt03wifiue. This is because they are mixing it up with SM-P601, it should be fixed on their side. I haven't tried but it might be the case for other recoveries as well. If you receive this error, flash the above recovery with ODIN and install from there. As a side note, the above recovery has much less features compared to TWRP but it's much faster, so it's better for quick test iterations.
I would be really glad if you can install, test and see what issues you might get.
Sources:
For those interested, here is the device source: https://github.com/ayberkozgur/android_device_samsung_lt03wifi.
You'll need the modified exynos 5420 kernel source: https://github.com/ayberkozgur/android_kernel_samsung_exynos5420
XDA:DevDB Information
CyanogenMod 11 - Note 10.1 (2014) WiFi, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
equilibriumtr
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-11-05
Last Updated 2014-11-05
Thanks so much! I really appreciate the work you devs do. I'll install it this weekend and play with it. Thanks again!
Camera issue
There is a weird camera issue that I can describe as follows:
cm stock Camera app hangs when launched; after this, if killed, it will crash at its next launch and Torch will start crashing as well. This seems normal as the flashlight is probably using the same driver as the camera.
Torch will work if Camera is not launched at all.
If the Google Camera app is downloaded, installed and launched, the stock Camera app will properly launch and work until the next reboot, even if the Google Camera app is closed.
At this point, within the stock Camera app, if the mode is set to Video instead of Picture (the default), the Camera app will launch successfully even after a reboot. After launched, it can go back into the Picture mode no problem. So in other words, launching the Camera app in the Picture mode will freeze the camera and the flashlight until reboot.
This is very weird and I couldn't pin it down. The dmesg dump of the stock Camera app: http://pastebin.com/xPDYRG4X
dmesg dump of the Android Camera app: http://pastebin.com/WaqxQA5E
As you see, they are nearly exactly the same.
It could be a permission issue, a driver issue, a kernel module that's loaded on-demand, I have no idea at this point. I need help. Do any of you guys have any insight as to why this might be the issue?
Update: I tried the first ~10 camera apps in the market and ALL of them work perfectly fine. I think CM camera app is to blame here. Is anyone aware of such a thing on other devices?
I love you, where is your donation button , Sir? I dont use the camera and i can stand the sleep of death(although i know it can be fixed) but you have done something really important, with cm on p600 it is much more possible to be supported as a legacy device on many roms instead of only waiting for samsung and roms based on samsung software. Omnirom, PARom, Aopk are just a compile away with something like p600 working. Congratulations, and i still want to see your donate button.
Thank you!
I replaced the camera app with Google Camera, in recovery, and it seems there are no more problems with it.
Is there any way to make the pen work?
Make sure you are using CAF-NEW for the audio,media, and display HALs. Also, make sure that you have the proper commits in the kernel to coincide with the caf-new hals.
Got the lt03wifiue instead of lt03wifi problem.
I cant flash the recovery that you compiled. It says that md5 does not match on odin 3.07. any suggestions?
installed PhilZ Touch, supposedly based on cwm and still got the lt03wifieu name problem.
Can i change lt03wifieu to lt03wifi flashing a samsung rom from sammobil?
Well, I did flash the recovery I uploaded with Odin 3.09 and I didn't try Odin 3.07 so there might be a problem there. I think the device name should be lt03wifixx in one place and lt03wifi in another. I'll check this out along with the HAL issue tomorrow.
Yes, I forgot to test the pen and it doesn't work at all. Adding it to the list.
Thank you for your kindness, but I don't think I really deserve a donation here, all I did was adjust the obvious parameters in a ready-made source
equilibriumtr said:
Well, I did flash the recovery I uploaded with Odin 3.09 and I didn't try Odin 3.07 so there might be a problem there. I think the device name should be lt03wifixx in one place and lt03wifi in another. I'll check this out along with the HAL issue tomorrow.
Click to expand...
Click to collapse
META-INF>com>google>android>updater-script
For its to work i deleted the first line that says:
assert(
getprop("ro.product.device") == "lt03wifi" ||
getprop("ro.build.product") == "lt03wifi" ||
abort("This package is for device: lt03wifi; this device is " + getprop("ro.product.device") + "."); );
Click to expand...
Click to collapse
After that and a data wipe on TWRP the installation went smooth. This will let you to flash the rom and also install cwm recovery that comes with CM roms so you can say bye to TWRP; from then, the "lt03wifieu" is not a problem for me on cwm as @equilibriumtr said. I can now flash the zip with the lines that didnt let me before.
I think we could recover the lost security from deleting that line by adding something like this:
assert(
getprop("ro.product.device") == "lt03wifi" ||
getprop("ro.build.product") == "lt03wifi" ||
getprop("ro.product.device") == "lt03wifiue" ||
getprop("ro.build.product") == "lt03wifiue" ||
abort("This package is for device: lt03wifi; this device is " + getprop("ro.product.device") + "."); );
Click to expand...
Click to collapse
Can someone please add the lines instead of deleting them first and try flashing? Since with CWM i dont get the "lt03wifi is not lt03wifiue" error so I dont know if my theory is correct.
Will be testing
Thank you for porting cyanogenmod to our tablet. I will be testing it and report anything that goes wrong.
Does ART work or Dalvik only? 'cause AFAIK you can't select ART in the official Samsung firmware...
Also the Exynos 3 cm port reportedly has got the S Pen working (without samsung's s pen functionalities of course), so you might want to take a look at their sources / repos?
PS: Keep up the good work, having a fully functional cm rom one day would be amazing :fingers-crossed:
r4yN said:
Does ART work or Dalvik only? 'cause AFAIK you can't select ART in the official Samsung firmware...
Also the Exynos 3 cm port reportedly has got the S Pen working (without samsung's s pen functionalities of course), so you might want to take a look at their sources / repos?
PS: Keep up the good work, having a fully functional cm rom one day would be amazing :fingers-crossed:
Click to expand...
Click to collapse
By the way, I always had a working pen in my Note II LTE, even back when only cm 10.2 was available. But I'll look at the pen functionality soon because we will be needing it ourselves.
I looked at the device name issue, rebuilt the source and I got exact same build.prop with the original Samsung ROM:
Code:
ro.product.name=lt03wifixx #This changed
ro.product.device=lt03wifi
ro.build.product=lt03wifi
It's basically TWRP's fault for mixing up SM-P601 (lt03wifiue) and SM-P600 (lt03wifi), it should be fixed on their side. I couldn't try philz touch because goo.im was down. For now, try to use my recovery.
I also tried flashing the recovery I provided with Odin 3.07, it works. Something might be wrong on your side.
jakew02 said:
Make sure you are using CAF-NEW for the audio,media, and display HALs. Also, make sure that you have the proper commits in the kernel to coincide with the caf-new hals.
Click to expand...
Click to collapse
I don't think Qualcomm hardware applies here, lt03wifi is Exynos-based.
Good to see that someone finally directed his attention to CM11 for our P600.
Waiting a long time for a working CM11.
Keep up the good work!!:good:
equilibriumtr said:
Well, I did flash the recovery I uploaded with Odin 3.09 and I didn't try Odin 3.07 so there might be a problem there. I think the device name should be lt03wifixx in one place and lt03wifi in another. I'll check this out along with the HAL issue tomorrow.
Yes, I forgot to test the pen and it doesn't work at all. Adding it to the list.
Thank you for your kindness, but I don't think I really deserve a donation here, all I did was adjust the obvious parameters in a ready-made source
Click to expand...
Click to collapse
If I'm not mistaken, the difference between Tab models and Note models is that the Tabs don't have an S-Pen. So it's not surprising the S-Pen doesn't work when using a Tab ROM.
Hi ...
equilibriumtr said:
I don't think Qualcomm hardware applies here, lt03wifi is Exynos-based.
Click to expand...
Click to collapse
Dear friend , is this ROM stable for Daily Use ? ( I were porting Ubuntu phone based on TW ROMs but as you made this ... it can have a better base ) ... also , do you know how is the RAM used in this ROM ? ( how much free ? )
With best Wishes
HItman1376
hitman1376 said:
Dear friend , is this ROM stable for Daily Use ? ( I were porting Ubuntu phone based on TW ROMs but as you made this ... it can have a better base ... but , do you know how is the RAM used in this ROM ? ( how much free ? ))
With best Wishes
HItman1376
Click to expand...
Click to collapse
Slow down there, mate - you can't expect a fully stable "Daily-use ready" Rom after just one day
This is still in early testing...and I doubt you can call it "stable" when there is a sleep of death problem
thanks ...
r4yN said:
Slow down there, mate - you can't expect a fully stable "Daily-use ready" Rom after just one day
This is still in early testing...and I doubt you can call it "stable" when there is a sleep of death problem
Click to expand...
Click to collapse
Thanks for the Fast response Dear friend ... Well, if the sleep of dead is all , you can get rid of it by increasing the Min CPU Freq using any CPU manager app ... can you tell me about the RAM ? ( we have RAM management problem in UP so we need some more free RAM comparing with TW ROMs ) ... Thanks in advance
With Best Wishes
Hitman1376
First off thanks for the port. I find stock android roms the best to run Linux on so if you could release a separate kernel with Virtual Terminal enabled (VT_config) it would be great.
As expected the rom only has the barebones on it and seems far more lightweight than even the most debloated rom. Merely not running the Samsung frameworks does wonders me thinks...
Q&A for [ROM][5.0.1][P760/P765] Resurrection Remix LP v5.2.0_Alpha [11/12/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.1][P760/P765] Resurrection Remix LP v5.2.0_Alpha [11/12/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome ROM
Thanks to @Rammar515!, this great awesome rom, it's run almost perfectly on my lg but there is a little bug , i don't know wethere it's bug or i did'nt flash rom perfectly, when i open messaging there is error so it can open the message , other object run smoothly except the messaging, thanks anyway
Is it ext4 based? What recovery should we use? I have Artas TWRP at the moment.
Is there android 5.0 with black settings menu? White color is too bright
abunajmi61 said:
Thanks to @Rammar515!, this great awesome rom, it's run almost perfectly on my lg but there is a little bug , i don't know wethere it's bug or i did'nt flash rom perfectly, when i open messaging there is error so it can open the message , other object run smoothly except the messaging, thanks anyway
Click to expand...
Click to collapse
I released fix for it. You can download it
Mam problem. Zainstalowałem sobie dzisiaj tego ROMa i co chwilę pojawia się komunikat "Niestety proces com.android.phone został zatrzymany", a jeżeli zablokuje telefon to po jakichś 2 lub 3 minutach wyskakuje Kernel Panic
Flash was easy, rom is very smoth, litle bugs in messenger app, thank for your work and i hope that u will continue, i love this rom!!! Thank you!
bug charger offline
bugs:
-Torch Does not work (no problem for me)
-NFC disabled (not problem)
-Charger offline: Is not it can be charged with mobile off when the battery is discharged?
Review after 1day usage
1. with one day of my testing ive found it to be laggy..
2. apps crash frequently due to memory management i guess even after disabling notifications on lockscreen ..
3. Few apps on playstore show a message that ur phone is incompatible ,well fot that ive used other app markets like mobgenie..
4. There is no option to control backlight in rom ,ive installed l9 backlightmod by artas from playstore to swichoff softkey backlight..
5. Battery life seems to be ok...
6. Inbuild flashlight doesnt work but using third party app solves the problem..
7. Dialer app seems to be so laggy, its takes ages for call screen to appear after presssing dial(green button)..
8. Signal vanishes very frequently even in full coverage area might be some ril related issue..
9. No on screen buttons option ,hopefully complete Resurction menu will appear as it is still in beta..
Thanks @Rammar515 for this rom hope u will make this rom smoother and usable in ua next update
keep up the good work mate...
Cheers!!!
Call Echo
Does anyone else have the problem with call echo ?
I had the same problem with artas rom.
Thanks!
Miracast hope work
When I try miracast it can't detect my tv miracast, hope this feature can run perfectly on this rom..thanks
recovery?
i am currently using artas182x AOSP 5.0.1 ROM, i want to try resurrection remix because artas rom has echo problem so which recovery required for resurrection remix 5.0.1 and is there any major bug , i mean rom is suitable for daily use?
nissan skyline said:
i am currently using artas182x AOSP 5.0.1 ROM, i want to try resurrection remix because artas rom has echo problem so which recovery required for resurrection remix 5.0.1 and is there any major bug , i mean rom is suitable for daily use?
Click to expand...
Click to collapse
You can use TWRP by Artas. THe Rom is really good and stable, I am using it with no problem.
disable F2FS in artas182x recovery ?
For installing this ROM via artas182x TWRP recovery should i disable F2FS ? And resurrection remix rom update via ota or manual update?
Excellent ROM
HI, I installed the ROM yesterday and til now it's working very smooth and battery with great performance.
Only not working Torch, other things like Wifi, Data, etc, are fine.
help me with storage pls, i have only 300 mb free afther instal rom and 3-4 apps! thans!
bytesx64 said:
Does anyone else have the problem with call echo ?
I had the same problem with artas rom.
Thanks!
Click to expand...
Click to collapse
not echo call
http://forum.xda-developers.com/showpost.php?p=57542992&postcount=91
Problem with apps install
It's great ROM (thanks for this), but i can't install many apps like Google Keep, newest Google Maps, Inbox, Sygic, Nokia Here. Please, solve this problem!
U can install apps but not from play store. Download it do your SD card and install through File Manager.
recovery help
should i disable F2FS in artas TWRP recovery to install this rom..??
What Is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
SOURCES
Device source : https://github.com/karthick111/android_device_corsica_cm
Kernel source : https://github.com/karthick111/Hyper_CM11
PATCHES:
Patches taken from here and also included in device tree too: https://github.com/xenon92/android_patches/tree/cm-11.0
WHAT WORKS?
Wi-Fi + Tethering
Bluetooth
RIL (Calls, SMS, Mobile Data)
Dual SIM
Sensors (Accelerometer, Compass,)
Camera (photo + Recording)
Video playback
Audio (playback + Recording)
GPS
App2SD
Known Issues:-None
DOWNLOADS
ROM Version 1:
http://www.4shared.com/zip/Gv0uDzziba/CM11-MW_by_karthick_mostwanted.html?
ROM Version 2
Google drive
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
ROM Version 3
https://www.androidfilehost.com/?fid=457095661767119153
CHANGELOGS:
Version 1: Initail build with
Version 2: Camcorder fixed
Version 3: Latest 2016-11-01 b/31618336 security patch
INSTALLATION GUIDE
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot[/B]
========================================================================
================================================================================================
CREDITS:
pawitp
xenon92
Differences ?
Thank you for the effort. Could you also elaborate the differences between your rom and Dhinesh77's CM 11 rom ?
Differences
Main difference App2SD
Why does it moves the apps automatically? And the phone memory fills with so fews apps. What should I do? I have facebook, messenger, whatsapp and pou and can't install any more apps. Help.
The video guide is no more exists. can you please upload video for installing this rom.
Thanks!
5310
Hello,
does this ROM work on 5310 without issues?
Thanks in advance...
zhlvf
Can you make App2sd flashable for the stock rom?
Cristiano Lira said:
Why does it moves the apps automatically? And the phone memory fills with so fews apps. What should I do? I have facebook, messenger, whatsapp and pou and can't install any more apps. Help.
Click to expand...
Click to collapse
Download Link2sd (available on Google Play) and in the settings appears an option to define where the apps are going to be installed as default
This is what appears (I have it in Spanish)
Installation aborted
I did the wipe data/factory reset but it doesn't install
well, at least I could install v2
---------- Post added at 11:42 PM ---------- Previous post was at 11:23 PM ----------
any changelog between v1 and v2?
I have being examinating the ROM and I have seen less things in configurations than in Dhinesh´s version, but they are minimun compared to the App2SD. Now I have liberated a lot of memory, THANKS KARTHICK!
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
muslosse said:
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
Click to expand...
Click to collapse
Hi, I'm from Chile, the same happens to me but I don't care. I think the problem is with the kernel
muslosse said:
Hello iam from indonesian.
I have problem on my samsung s5312. When i flash CM11 i really like it. Simple, fast and many feature added.
But when my samsung turned off and i charge it, battery logo do not run properly. Battery logo stuck and the screen always wake !
But, before i flash CM 11 I never get problem like this in previous stock rom.
Thats all. Sorry for bad english. Hope you understand my problem.
Regard,
Muslosse
Click to expand...
Click to collapse
Actually, there is no way
Is it compatible with gt-s5312b??
karthick mostwanted said:
What Is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
SOURCES
Device source : https://github.com/karthick111/android_device_corsica_cm
Kernel source : https://github.com/karthick111/Hyper_CM11
PATCHES:
Patches taken from here and also included in device tree too: https://github.com/xenon92/android_patches/tree/cm-11.0
WHAT WORKS?
Wi-Fi + Tethering
Bluetooth
RIL (Calls, SMS, Mobile Data)
Dual SIM
Sensors (Accelerometer, Compass,)
Camera (photo + Recording)
Video playback
Audio (playback + Recording)
GPS
App2SD
Known Issues:-None
DOWNLOADS
ROM Version 1:
http://www.4shared.com/zip/Gv0uDzziba/CM11-MW_by_karthick_mostwanted.html?
ROM Version 2
Google drive
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
INSTALLATION GUIDE
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot[/B]
========================================================================
================================================================================================
CREDITS:
pawitp
xenon92
Click to expand...
Click to collapse
Is this ROM compatible with the gt-s5312b device?
And if it is, how van I avoid the "status 7" error? This ROM has no updater file for make possible an edition deleting the "assert" part!
Missing Drive uHID suport for joystick bluetooth
Missing uHID drivers for Joystick and Gamepad Bluetooth .. and Bug in Brightness
To fix bug can't adjust brightness on CM11 mw v3..
Download this zip : Fix Brightness
Flash this zip on recovery..
I hope the brightness working properly..
Sorry for my bad english.. :""v
Thanks to @karthick mostwanted and all dev from gts5312/gts5310
Audio not working on S5310
Rom works great on my S5310, I use my phone principally as a modem and for messaging but I recently got a new plan from my provider that gives me 1000 minutes of telephone credit, it was then that I realised that the speaker and microphone are not working, it does vibrate though. Any one know how to fix the audio? or I will just have to wait for a new rom for the S5310. I do use the camera and the CM12/13 versions currently seem to have problems with that.
atomicbob said:
Rom works great on my S5310, I use my phone principally as a modem and for messaging but I recently got a new plan from my provider that gives me 1000 minutes of telephone credit, it was then that I realised that the speaker and microphone are not working, it does vibrate though. Any one know how to fix the audio? or I will just have to wait for a new rom for the S5310. I do use the camera and the CM12/13 versions currently seem to have problems with that.
Click to expand...
Click to collapse
Bro try this one : https://www.androidfilehost.com/?fid=385035244224403140
I think this is the best rom for neo
cm-11-20161202-UNOFFICIAL-corsica.zip
Kristaps(Lv) said:
I think this is the best rom for neo
Click to expand...
Click to collapse
Thanks for the link, it is has the same kind of interface only in this rom everything works perfect for my S5310. Karthick111 has a lot of interesting files over there at androidfilehost. :good: