FIRST .Please help i have a problem about NVRAM WARNING:Err = 0x10 means my mac adresss is illegal.after i flashed rom this appears when i turn on my wifi.i need somebody to send me a file called NVRAM.IMG ,.can somebody please send me for LENOVO A536.
second i thought its just my mac address but then when i saw my device information the pcba no , serial no , imei is missing..please how can i restore that
before flash
http://postimg*prc2unx/ after flash
http://postimg*fy736pp/
THANK YOU IN ADVANCE
my phone is LENOVO A536(MT6582M)
anyone please who experienced like this to any phone
a536
same problem here . anyone can answer it??
any solution to the problem?
i tried sp flash tool with format all+ download. so now i have imei errors and nvram warning. same problem as above. any solution?
solution for imei and WiFi NVRAM WARNING: ERR 0x10
follow the steps:
1. root ur lenovo a536 (with kingroot apk, 100% success)
2. install root explorer apk
3. use MTKdroidTools.(dont use the root button, just the imei/nvram button, change ur imei, reboot )
4. see this post http://forum.xda-developers.com/showthread.php?t=2730486
and voila
It's not working for me - LENOVO A536
That post in step 4 didn't fix the problem and NVRAM WARNING: Err = 0x10 isn't gone.
Root your phone then install chamelepon from playstore and insert your imei
Hope this help
OMG
szayell22 said:
Root your phone then install chamelepon from playstore and insert your imei
Hope this help
Click to expand...
Click to collapse
After spending a whole day with this Lenovo A536 and about to call quits (not really), tried all those MTKdroidtools steps and did not work. Then tried "Chamelephon" O M G My IMIE are there and my SIM card is now working (in fact SIM is working ) Thanks a bunch.
clarkst33l said:
After spending a whole day with this Lenovo A536 and about to call quits (not really), tried all those MTKdroidtools steps and did not work. Then tried "Chamelephon" O M G My IMIE are there and my SIM card is now working (in fact SIM is working ) Thanks a bunch.
Click to expand...
Click to collapse
Glad it helped
Do you have any method for restoring the serial number of the Phone, i am also using Lenovo A536 and i've flashed the stock rom but now the serial number is gone ?
szayell22 said:
Root your phone then install chamelepon from playstore and insert your imei
Hope this help
Click to expand...
Click to collapse
This is temporary method factory reset then Agen no Imei.
rsdevil9 said:
This is temporary method factory reset then Agen no Imei.
Click to expand...
Click to collapse
Yep when you factory reset your phone it will disappear but at least you can get ur imei back
Hello xda users,
Yesterday I flashed a custom rom (Darksense) on my elephone p9000. Everything went fine, that's what I thought.
My imei are changed to 111111111111111 and 222222222222222 , I cant receive sms and calls anymore.
Is there any way to change imei for the elephone p9000 ?
I was looking on engineer mode but...
There's no 'cds informations' on this phone.
Thanks in advance for any help.
reflash the stock rom and then follow the video https://youtu.be/w9POQK3kf6U
Reinstalled the Stock ROM but there's still no 'cds informations'
I'm really lost, cant receive any sms nor call :crying:
http://bbs.elephone.hk/thread-12457-1-1.html#.WBzMwPqLQdU
This method returns me that error: "Execution Warning : NVRAM database file is inconsistent with target load"
Still having the imei problem. My phone is a toy right now.
Can anyone give me some help ?
Been waiting for months now to see if the IMEI can be recovered. At this point it's a glorified PDA...
Moved on to bigger better things...
Managed to fix it !
Thanks to @jay98shankar
1) http://www.needrom.com/download/android-6-stock-20160401/ Sign up and download this (dont download the latest official rom(810) this is the only rom which can help you)
2) Flash using sp flash
3) Go to engineer mode you'll find CDS Information
4) Avoid formating your phone using sp tool just - formating made all this problem
Starkkk said:
Managed to fix it !
Thanks to @jay98shankar
1) http://www.needrom.com/download/android-6-stock-20160401/ Sign up and download this (dont download the latest official rom(810) this is the only rom which can help you)
2) Flash using sp flash
3) Go to engineer mode you'll find CDS Information
4) Avoid formating your phone using sp tool just - formating made all this problem
Click to expand...
Click to collapse
Trid this before but hell, try again.
Same results - after entering AT+EGMR"IMEI" (imei number, not IMEI....) I hit Send AT Command and get " INFO - This command is not allowed in UserBuild"
Still no love.....
@ultramag69
Add a space between AT+ and EGMR.
The command must looks like that:
For IMEI 1: AT+ EGMR=1,7,”YOUR NEW IMEI"
For IMEI 2: AT+ EGMR=1,10,”YOUR NEW IMEI"
Starkkk said:
@ultramag69
Add a space between AT+ and EGMR.
The command must looks like that:
For IMEI 1: AT+ EGMR=1,7,”YOUR NEW IMEI"
For IMEI 2: AT+ EGMR=1,10,”YOUR NEW IMEI"
Click to expand...
Click to collapse
Did as you said -
INFO.
AT command is sent:
+CME ERROR: 100
is displayed...
About ready to throw out the window....
Might just use as a codi remote... This is taking too much energy for a Peice Of Sh!t phone...
Download MauiMeta 3G, install the drivers for P9000. I think you can use the same drivers as SP flash tool. Run Mauimeta, choose something like "flash imei", laod file witch is named MDDB_**********.EDB. Shut down your phone, press on start and turn your phone on. Write your imei into the textfields and flash it. (For me it worked only with Stockrom)
Fix IMEI Number Without Root Or Without PC (Lollipop MTK Device) :
NOTE : (Must Read)
This guide was tested on Lenovo Vibe P1ma40 Lollipop stock ROM. It may also work on some other Mtk Lollipop device but it may need to change the code (Space between AT+ and EGMR... Eg; AT+ EGMR=1,7"IMEI_1" ) or without any space or maybe no need.
STEPS :
1) Download and install Mtk Engineering Mode apk from here.
2) Open and Go to Engineer mode (MTK)
3) Go to Connectivity Tab and Select CDS information.
4) Select Radio Information after that Select Phone1. (for the first IMEI)
5) At the top there is a command line which begins “AT+” just type there AT+E G M R=1,7,"IMEI_1" (Put your first IMEI number number)
6) Hit send command and you will / may get a confirmation.
7) Now go back and select “Phone2. (for the second IMEI number)
8) At the top there is a command line which begins “AT+” just type there AT+E G M R=1,10,"IMEI_2" (Put your second IMEI number)
9) Reboot your phone and check your IMEI number (Dial *#06#).
Note : Put a space between E & G & M & R ( Don't put space between AT and + or any other except I mentioned )
Eg;
AT+E<space>G<space>M<space>R=1,7"123456789098765" (Sim 1)
AT+E<space>G<space>M<space>R=1,10"123456789123456" (Sim 2)
mod edit - link removed
A very common method, but rarely shared on XDA, thanks for that :good: (working on MM)
I am not getting CDS information at MTK engineering app in my mobile
I am using Lenovo Vibe S1 Error Unknown Imei number
abdulheru said:
I am not getting CDS information at MTK engineering app in my mobile
I am using Lenovo Vibe S1 Error Unknown Imei number
Click to expand...
Click to collapse
Are you using stock rom?
Vlk Is My Name said:
Are you using stock rom?
Click to expand...
Click to collapse
Don't know whether it is stock rom or original rom
I just bought it as second sales.
Any tips on how to do this on devices with Snapdragon?
not working
mod edit - quote removed
I have micromax p681 and it didnt work for me.It gives error cme +100 And i suspect that your device is rooted and you might me cheating(sorry)like some fake youtubers(who change imei on rooted device with apps that work only on rooted devices like mtk, uncle vuncle, xposed).
harproy said:
I have micromax p681 and it didnt work for me.It gives error cme +100 And i suspect that your device is rooted and you might me cheating(sorry)like some fake youtubers(who change imei on rooted device with apps that work only on rooted devices like mtk, uncle vuncle, xposed).
Click to expand...
Click to collapse
Read carefully from the beginning again... dude
mod edit - quote removed
My bad! I m extremely sorry n i take my foolish words back. Thx a lot the first format AT+ E.. worked for me.
harproy said:
mod edit - quote removed
My bad! I m extremely sorry n i take my foolish words back. Thx a lot the first format AT+ E.. worked for me.
Click to expand...
Click to collapse
:good: wc
Thanks a lot this method helped, side note the device is AG Boost running Kitkat 4.4.2
thanks
thanks a lot
I had faced this prob also
and now it's solved thanks to this awesome method
my mobile Lenovo p1m
thanks again
engineering mode can be accessed using ussd : *#*#3646633#*#*
Error in phone 2
This method worked fine for sim 1,but when I do this in sim 2, it shows "at command is sent: error 100".
Any help?
Lenovo vibe p1m.
I tried it, minding the spaces, etc, but I am still getting the error message: "at command is sent: error 100".
Check the code again...
I cant acces Phone 1. Its just drops back to previous menu. Any help?
Worked flawlessly on Lenovo S1 Lite! Thanks!
How can I get CDS and radio information on Lenovo k4 note. Because when I'm trying I couldn't find that option.
Nothing to see here
2char
Hi all,
I just wanted to share what I did when I had a few problems with my Lenovo K6 Note - karatep.
What did I do which ruined my phone?
I unlocked my bootloader, still on stock ROM, haven't installed TWRP yet.
Since then no calls on non-VoLTE network like Vodafone/Airtel/BSNL.
Primary SIM doesn't connect to any other network than 4G.
I had installed CM15.1 ROM with TWRP and Magisk root and I had the same network issues.
When should you follow this guide?
You have problems with network connectivity where you can't make calls on 3G or 2G network.
Primary (data) slot doesn't connect to 3G or 2G.
No signal on either one slot or both the slots.
IMEI shown as null or 0.
WiFi and Bluetooth address either different or shown as unavailable.
Rebooting to fastboot and performing "fastboot erase modemst1; fastboot erase modemst2" didn't work for you and lost your IMEI and/or WiFi and Bluetooth address.
Do not reboot to fastboot and execute "fastboot erase modemst1; fastboot erase modemst2". I lost my IMEI and MAC because of this.
Requirements:
1. Your phone needs to have root access.
2. Your original IMEI numbers and WiFi address, you can find them from your phone's packaging box.
If you don't have your IMEI, better use an IMEI from an old/dead phone of yours. Don't google this up, there can be blacklisted IMEIs.
Steps:
Preparing the .QCN file for restoration
Download and install UltraEdit (you can google up this for the link)
Download and install Qualcomm QPST/QFIL downloader (google it again)
Download IMEI Converter (find it in the attachments below)
Download .QCN file (find it in attachments, this is for Lenovo K6 Note - karatep)
Get your IMEI (for both the slots), WiFi and Bluetooth addresses
Open IMEI Converter and type your IMEI. You will get the hexcode for your IMEI, get the hexcode for both of your IMEIs. Copy the hexcodes.
Open the .QCN file with UltraEdit and search for "08 8A 11 11 11 11 11 11 11" (without the quotes). This is the dummy IMEI in the file, you have to replace it with your phone's IMEI.
In UltraEdit, goto find and replace, search for 08 8A 11 11 11 11 11 11 11 and replace it with your IMEI's hexcode. You have to replace the first hexcode with the hexcode for your second slot's IMEI and the second hexcode with the hexcode for your first slot's IMEI.
Search for AA AA AA AA AA AA and replace it with your WiFi MAC address, this has to update your Bluetooth address as well, there are four places where you have to replace it with your WiFi MAC address.
Save the .QCN file and close UltraEdit.
Enabling DIAG COM port on your phone to download .QCN to your phone
Execute in command prompt.
adb shell
su
setprop sys.usb.config diag,adb
Click to expand...
Click to collapse
This will enable the diagnostic port on your phone.
Restoring .QCN to your phone
Open QFIL as administrator.
Connect your phone to your computer, keep your phone powered on with DIAG port enabled.
Goto Tools -> QCN Backup Restore
Browse your edited .QCN file
Don't change SPC code - leave it as such.
Select Enable Multi-SIM.
Click on Restore QCN.
This will take some time, once done, restart your phone.
Voila! Your IMEI, WiFi and Bluetooth addresses should be updated and network should be able to receive signal and place calls.
Please feel free to reach me if you run into any issues, I'll try my best to help you!
Thanks,
tfr!
reserved
anyone with .QCN file for K6 Power (k33a42)?
If you di then please share it or tell me where to get it!
Thanks in advance.
manishurfmannu said:
anyone with .QCN file for K6 Power (k33a42)?
If you di then please share it or tell me where to get it!
Thanks in advance.
Click to expand...
Click to collapse
If you get qcn file for Lenovo k6 power share with me
pranavpro0001 said:
If you get qcn file for Lenovo k6 power share with me
Click to expand...
Click to collapse
flash the stock S223 firmware, it will fix the issue.
manishurfmannu said:
flash the stock S223 firmware, it will fix the issue.
Click to expand...
Click to collapse
No it will not. Flashing stock firmware even with QFIL will not fix baseband issue.
I did this but....
theflyingrahul said:
Hi all,
I just wanted to share what I did when I had a few problems with my Lenovo K6 Note - karatep.
What did I do which ruined my phone?
I unlocked my bootloader, still on stock ROM, haven't installed TWRP yet.
Since then no calls on non-VoLTE network like Vodafone/Airtel/BSNL.
Primary SIM doesn't connect to any other network than 4G.
I had installed CM15.1 ROM with TWRP and Magisk root and I had the same network issues.
When should you follow this guide?
You have problems with network connectivity where you can't make calls on 3G or 2G network.
Primary (data) slot doesn't connect to 3G or 2G.
No signal on either one slot or both the slots.
IMEI shown as null or 0.
WiFi and Bluetooth address either different or shown as unavailable.
Rebooting to fastboot and performing "fastboot erase modemst1; fastboot erase modemst2" didn't work for you and lost your IMEI and/or WiFi and Bluetooth address.
Do not reboot to fastboot and execute "fastboot erase modemst1; fastboot erase modemst2". I lost my IMEI and MAC because of this.
Requirements:
1. Your phone needs to have root access.
2. Your original IMEI numbers and WiFi address, you can find them from your phone's packaging box.
If you don't have your IMEI, better use an IMEI from an old/dead phone of yours. Don't google this up, there can be blacklisted IMEIs.
Steps:
Preparing the .QCN file for restoration
Download and install UltraEdit (you can google up this for the link)
Download and install Qualcomm QPST/QFIL downloader (google it again)
Download IMEI Converter (find it in the attachments below)
Download .QCN file (find it in attachments, this is for Lenovo K6 Note - karatep)
Get your IMEI (for both the slots), WiFi and Bluetooth addresses
Open IMEI Converter and type your IMEI. You will get the hexcode for your IMEI, get the hexcode for both of your IMEIs. Copy the hexcodes.
Open the .QCN file with UltraEdit and search for "08 8A 11 11 11 11 11 11 11" (without the quotes). This is the dummy IMEI in the file, you have to replace it with your phone's IMEI.
In UltraEdit, goto find and replace, search for 08 8A 11 11 11 11 11 11 11 and replace it with your IMEI's hexcode. You have to replace the first hexcode with the hexcode for your second slot's IMEI and the second hexcode with the hexcode for your first slot's IMEI.
Search for AA AA AA AA AA AA and replace it with your WiFi MAC address, this has to update your Bluetooth address as well, there are four places where you have to replace it with your WiFi MAC address.
Save the .QCN file and close UltraEdit.
Enabling DIAG COM port on your phone to download .QCN to your phone
Execute in command prompt.
This will enable the diagnostic port on your phone.
Restoring .QCN to your phone
Open QFIL as administrator.
Connect your phone to your computer, keep your phone powered on with DIAG port enabled.
Goto Tools -> QCN Backup Restore
Browse your edited .QCN file
Don't change SPC code - leave it as such.
Select Enable Multi-SIM.
Click on Restore QCN.
This will take some time, once done, restart your phone.
Voila! Your IMEI, WiFi and Bluetooth addresses should be updated and network should be able to receive signal and place calls.
Please feel free to reach me if you run into any issues, I'll try my best to help you!
Thanks,
tfr!
Click to expand...
Click to collapse
i have Lenovo k6 note ,i don't know about the karatep part, it's in the vibe series ,k53a48 is the name with 4 GB ram,
I lost my IMEI, sn etc after doing the fastboot commands in an attempt to fix the common radio band issue of enabling us bands..but wifi, Bluetooth, etc weren't affected at all..
I've flashed qcn file from a youtube video after editing the IMEI to my own ..everything is restored, baseband,SN number(sn number is not mine tho),IMEI all..
but,
my phone still cant read sim cards, it says that the sim is not ready.. earlier the phone couldn't even recognize that i ve inserted the sim but after the qcn flash it can do that..but still it says sim card not ready...
please help me sir its been months! please?
i m running on the stock rom of Lenovo k6 note
guitargeek0517 said:
i have Lenovo k6 note ,i don't know about the karatep part, it's in the vibe series ,k53a48 is the name with 4 GB ram,
I lost my IMEI, sn etc after doing the fastboot commands in an attempt to fix the common radio band issue of enabling us bands..but wifi, Bluetooth, etc weren't affected at all..
I've flashed qcn file from a youtube video after editing the IMEI to my own ..everything is restored, baseband,SN number(sn number is not mine tho),IMEI all..
but,
my phone still cant read sim cards, it says that the sim is not ready.. earlier the phone couldn't even recognize that i ve inserted the sim but after the qcn flash it can do that..but still it says sim card not ready...
please help me sir its been months! please?
i m running on the stock rom of Lenovo k6 note
Click to expand...
Click to collapse
Hello,
Sorry for the late reply, we have a bad network connection here due to the lockdown.
Coming to your problem, karatep simply refers to K6 Note, so you have done the right procedure hopefully.
Can you see the IMEI when you enter *#06# in the Dialer?
You're on stock ROM right? Where did you get it from? You did a full flash with QFIL or a ROM flash only? Please note that ROM flashes can be dirty.
If you can see your IMEI, please try the following in the order I've mentioned below.
1. Check the network settings and select the proper network type. Especially if you are on Jio, set it to LTE only, make sure that the non-Jio SIM is set to GSM only. This is the most common problem.
2. Perform a full system reset from recovery, must solve the problem usually.
3. Try lineage 15.1 or 16.0, you'll be able to find the links here, they are really stable and worth upgrading.
4. Full factory flash with QFIL, you should be able to find videos on YouTube, else let me know, I'll be happy to help!
Let me know the results.
Happy to help!
rah.
theflyingrahul said:
Hello,
Sorry for the late reply, we have a bad network connection here due to the lockdown.
Coming to your problem, karatep simply refers to K6 Note, so you have done the right procedure hopefully.
Can you see the IMEI when you enter *#06# in the Dialer?
You're on stock ROM right? Where did you get it from? You did a full flash with QFIL or a ROM flash only? Please note that ROM flashes can be dirty.
If you can see your IMEI, please try the following in the order I've mentioned below.
1. Check the network settings and select the proper network type. Especially if you are on Jio, set it to LTE only, make sure that the non-Jio SIM is set to GSM only. This is the most common problem.
2. Perform a full system reset from recovery, must solve the problem usually.
3. Try lineage 15.1 or 16.0, you'll be able to find the links here, they are really stable and worth upgrading.
4. Full factory flash with QFIL, you should be able to find videos on YouTube, else let me know, I'll be happy to help!
Let me know the results.
Happy to help!
rah.
Click to expand...
Click to collapse
Thank you for the reply,
i do see my imei when i enter the code, Its the sn number that has been changed..
and about the stock rom part, I didn't do it by myself, i had given the phone to a repair shop earlier to fix the issue, this was before i flashed the QCN myself,
i flashed the qcn from a youtube video and all that guy had told was to have stock rom marshmallow, the repair shop had flashed a marshmallow rom so i figured it would do.. but i dont know what tool they used to flash it..
i used QFIL to flash the QCN though..
Let me try the factory reset solution and if that dont work i ll try to flash stock rom again...
for the other two,
1. The network settings are inaccessible for me(i tried to attach screenshots but its asking for URLs)
3. I really dont want to use lineage OS if i dont have to..
let me try the other solutions and i ll let you know..
thank you so much for helping me..
guitargeek0517 said:
Thank you for the reply,
i do see my imei when i enter the code, Its the sn number that has been changed..
and about the stock rom part, I didn't do it by myself, i had given the phone to a repair shop earlier to fix the issue, this was before i flashed the QCN myself,
i flashed the qcn from a youtube video and all that guy had told was to have stock rom marshmallow, the repair shop had flashed a marshmallow rom so i figured it would do.. but i dont know what tool they used to flash it..
i used QFIL to flash the QCN though..
Let me try the factory reset solution and if that dont work i ll try to flash stock rom again...
for the other two,
1. The network settings are inaccessible for me(i tried to attach screenshots but its asking for URLs)
3. I really dont want to use lineage OS if i dont have to..
let me try the other solutions and i ll let you know..
thank you so much for helping me..
Click to expand...
Click to collapse
Hello,
You cannot do anything about the serial number, there is currently no way to restore it, it should not limit the functionality of the device.
Is your phone rooted now? Do you have TWRP installed? Try resetting the phone from TWRP. If it doesn't work, restore stock rom with QFIL. Restoring with QFIL will reprogram your eMMC chip and revert it to stock, TWRP will be removed. This will give you the cleanest possible install.
For flashing QCN, you don't need stock Marshmallow. I'm on Lineage 16.0 and I keep changing my MAC address with QFIL, that is not a problem at all.
I'd like to see the screenshots, you can add them as attachments... Use the paper clip icon above, else upload the image to Google Drive and put the URL here.
Happy to help!
rah.
guitargeek0517 said:
Thank you for the reply,
i do see my imei when i enter the code, Its the sn number that has been changed..
and about the stock rom part, I didn't do it by myself, i had given the phone to a repair shop earlier to fix the issue, this was before i flashed the QCN myself,
i flashed the qcn from a youtube video and all that guy had told was to have stock rom marshmallow, the repair shop had flashed a marshmallow rom so i figured it would do.. but i dont know what tool they used to flash it..
i used QFIL to flash the QCN though..
Let me try the factory reset solution and if that dont work i ll try to flash stock rom again...
for the other two,
1. The network settings are inaccessible for me(i tried to attach screenshots but its asking for URLs)
3. I really dont want to use lineage OS if i dont have to..
let me try the other solutions and i ll let you know..
thank you so much for helping me..
Click to expand...
Click to collapse
What's your network BTW?
Here are the screenshots
https://drive.google.com/folderview?id=1Bxed7rCpd0MoVbnZCSGtJBjAlmgVkF1r
And no my phone is not rooted and nor is TWRP installed..i was planning on rooting it as a last resort..
I m now currently downloading the stock rom file..its nearly completed..
Should i try rooting it before flashing stock? I dont want to risk another brick cause of rooting
guitargeek0517 said:
https://drive.google.com/folderview?id=1Bxed7rCpd0MoVbnZCSGtJBjAlmgVkF1r
And no my phone is not rooted and nor is TWRP installed..i was planning on rooting it as a last resort..
I m now currently downloading the stock rom file..its nearly completed..
Should i try rooting it before flashing stock? I dont want to risk another brick cause of rooting
Click to expand...
Click to collapse
You don't have to root if you're flashing with QFIL.
How did you flash the QCN without root anyways?
Again, what network are you in?
theflyingrahul said:
You don't have to root if you're flashing with QFIL.
How did you flash the QCN without root anyways?
Again, what network are you in?
Click to expand...
Click to collapse
i followed this youtube video..
https://www.youtube.com/watch?v=1-4tmWvTGiI
i remember reading about it somewhere.. you only need to enable diagnostic mode to flash QCN, and many phones require root to enable this port, and some other need root to unlock to bootloader..
but k53a48 phones have unlocked bootloader and diagnostic mode port can be enabled easily like the guy in the youtube video..
(power off and press power button and volume up till a screen comes on and then connecting the USB, the PC installs the diagnostic port..
this is what i think happened.. i had zero errors during qcn flashing and i hope i didn't do it wrong?
I Have idea network if that is what you asked
The ROM download is complete..so i ll start flashing then?
guitargeek0517 said:
i followed this youtube video..
https://www.youtube.com/watch?v=1-4tmWvTGiI
i remember reading about it somewhere.. you only need to enable diagnostic mode to flash QCN, and many phones require root to enable this port, and some other need root to unlock to bootloader..
but k53a48 phones have unlocked bootloader and diagnostic mode port can be enabled easily like the guy in the youtube video..
(power off and press power button and volume up till a screen comes on and then connecting the USB, the PC installs the diagnostic port..
this is what i think happened.. i had zero errors during qcn flashing and i hope i didn't do it wrong?
I Have idea network if that is what you asked
The ROM download is complete..so i ll start flashing then?
Click to expand...
Click to collapse
It's correct that you have to enable only the diagnostic port to download QCN, but I'm not sure of the procedure that you describe here....
K6 Note doesn't come with an unlocked bootloader by default, you'll have to manually unlock.
I'm not sure of the technique that is shown in the video, the general procedure to open the diagnostic port is through adb. But if you are sure that the IMEI is flashed correctly, then there's nothing to worry about I guess.
Again, you're going to flash the S223 ROM using QFIL right?
Your network is fine, it's non-VoLTE, so calls should work if you have restored the QCN properly.
I m downloading the rom from a link in the description of a video..there were multiple stock files and i asked the youtuber and he told me download this one..
Lenovo_K6_Note_K53A48_K53_USR_S306_1709051329_Q00440_POLK_QPST
This is the one that i downloaded.. why are there so many stock files anyway? Is this right? Else
Would flashing stock using lenovo moto assistant application work?
Some people in xda had success using lenovo moto assistant..but the application asks for HW code and I cannot find my HW code from my sn number- HNB1GDX3 ,
No calls are not working, even ussd codes arent working..does that mean that even the qcn flash was done wrong ?:crying:
guitargeek0517 said:
I m downloading the rom from a link in the description of a video..there were multiple stock files and i asked the youtuber and he told me download this one..
Lenovo_K6_Note_K53A48_K53_USR_S306_1709051329_Q00440_POLK_QPST
This is the one that i downloaded.. why are there so many stock files anyway? Is this right? Else
Would flashing stock using lenovo moto assistant application work?
Some people in xda had success using lenovo moto assistant..but the application asks for HW code and I cannot find my HW code from my sn number- HNB1GDX3 ,
No calls are not working, even ussd codes arent working..does that mean that even the qcn flash was done wrong ?:crying:
Click to expand...
Click to collapse
Hello,
The file seems to be correct. You should install QPST and use it to flash the ROM file.
Lenovo moto assistant might work, I had no success with that though.
The QCN that you used might be probably dirty, I'd suggest you to reflash with QPST and try burning the QCN again. Generate a new QCN before you do.
Sir, I Did custom ROM flash for lenovo K6 note, with twrp and lineage OS 16, after completion of ROM flash, although I have IMEI number, wifi MAC address in about phone section
My problems to FIX:
------------------------
1) Need Volte support(VOLTE not supporting for my JIO SIM)
2) *#06# IMEI code not working(IT shows "Connection problem or invalid MMI code." although the IMEI numbers are available in About phone category under settings)
3) In settings Bluetooth address "Unavailable"
FayazD said:
Sir, I Did custom ROM flash for lenovo K6 note, with twrp and lineage OS 16, after completion of ROM flash, although I have IMEI number, wifi MAC address in about phone section
My problems to FIX:
------------------------
1) Need Volte support(VOLTE not supporting for my JIO SIM)
2) *#06# IMEI code not working(IT shows "Connection problem or invalid MMI code." although the IMEI numbers are available in About phone category under settings)
3) In settings Bluetooth address "Unavailable"
Click to expand...
Click to collapse
Hey FayazD,
What you've mentioned seems to be a common problem and I couldn't really find a fix.
1). VoLTE doesn't seem to work. Before writing this post (restoring the baseband), no other calls except VoLTE ones worked for me. After restoring the baseband, 3G/2G calls work and VoLTE doesn't work. I'm not sure if there is a fix for that.
2). This could probably be an issue with the ROM itself. Try to flash a different ROM, I recommend AEX, which I'm currently using and is very stable.
3). The Bluetooth address issue again is something which I observed in Lineage 16. It shouldn't affect the functionality, except for the changing Bluetooth address on every reboot. Not sure if it is an issue with the ROM itself, try AEX, this issue isn't present there. Again note that the Bluetooth address could be shown as "Unavailable" when Bluetooth is turned off.
Will update if there is a solution for the VoLTE thingy.
theflyingrahul said:
Hey FayazD,
What you've mentioned seems to be a common problem and I couldn't really find a fix.
1). VoLTE doesn't seem to work. Before writing this post (restoring the baseband), no other calls except VoLTE ones worked for me. After restoring the baseband, 3G/2G calls work and VoLTE doesn't work. I'm not sure if there is a fix for that.
2). This could probably be an issue with the ROM itself. Try to flash a different ROM, I recommend AEX, which I'm currently using and is very stable.
3). The Bluetooth address issue again is something which I observed in Lineage 16. It shouldn't affect the functionality, except for the changing Bluetooth address on every reboot. Not sure if it is an issue with the ROM itself, try AEX, this issue isn't present there. Again note that the Bluetooth address could be shown as "Unavailable" when Bluetooth is turned off.
Will update if there is a solution for the VoLTE thingy.
Click to expand...
Click to collapse
In AEX the VOLTE will work or not, if you give me the assurance i'll flash with AEX