[MOD][XPOSED][2018/2/25 1.60]Ringer & Notification Volume Unlink - Xposed Framework Modules

Since ICS, Google has decided to link the volume of ringer and notification volume together. This Xposed module can separate the two streams as they were before ICS. This module is based on AOSP AudioService and Settings source codes. I tested it on my Sony Xperia ZR phone and should work on other AOSP-based ROM too.
Requirements
1. Your phone must be rooted
2. Xposed framework must be installed first http://forum.xda-developers.com/showthread.php?t=1574401
Instructions
Install the module
Run Xposed Installer and enable the module Separate ringer & notification volume link in ICS/JB
Reboot the phone
Credits
Special thanks to HpNoTiQ for testing on Lollipop!
Source code
You can find source code for this module from GitHub here.
Download
Xposed Module Repository | Play Store

1.60
- Add support for Android 8 (Oreo)
1.50
- Add support for Nougat
1.41
- Add support for Sony Xperia Android 6 UI
1.40
- Add support for Android 6
1.31
- Improved exception handling for 5.1 non Xperia devices
1.30
- Add support for Xperia 5.1 ROM (volume rocker popup)
1.22
- Add support for Android 5.1
1.21
- Added Slovak translation
1.20
- Add support for Lollipop (Android 5.0) (thanks to HpNoTiQ)
1.11
- Updated Simplified Chinese localisation (thanks to liveasx)
1.10
- Add localisations

Very Good Job, dude!!:victory:
But have a problems with MTK devices It's used another framework may be

DenisMF said:
Very Good Job, dude!!:victory:
But have a problems with MTK devices It's used another framework may be
Click to expand...
Click to collapse
Hm, have you tried GravityBox xposed mod? It's for MTK, I believe, and there's this option under one of the categories inside the app.
Sent from my Xperia Z

sunbriel said:
Hm, have you tried GravityBox xposed mod? It's for MTK, I believe, and there's this option under one of the categories inside the app.
Sent from my Xperia Z
Click to expand...
Click to collapse
GravityBox is specialy for 6589 quard cores, but I have 6577 dual core

sunbriel said:
Hm, have you tried GravityBox xposed mod? It's for MTK, I believe, and there's this option under one of the categories inside the app.
Sent from my Xperia Z
Click to expand...
Click to collapse
Yes, this mod works only if your ROM uses Android framework, at least for the AudioService.
GravityBox has similar option for MTK devices.

Confirmed on Xperia L with stock FW 4.1.2

Not work on Lenovo A390 4.0.4 so sad
Sent From My A390 by Tapatalk 4

kpkid said:
Not work on Lenovo A390 4.0.4 so sad
Sent From My A390 by Tapatalk 4
Click to expand...
Click to collapse
Do you have a link for this A390 ROM so that I can take a look at the code?

itandy said:
Do you have a link for this A390 ROM so that I can take a look at the code?
Click to expand...
Click to collapse
I sent you message
Sent From My A390 by Tapatalk 4

Not working on my rooted EPIC 4g Touch.

DRACONIANDRAGON said:
Not working on my rooted EPIC 4g Touch.
Click to expand...
Click to collapse
Can you post a screenshot of the system settings volume screen?
Sent from my C5503 using Tapatalk 4

Really need this
Finally i solved my problem after installed this app thank you very much. developer

DRACONIANDRAGON said:
View attachment 2223306
Click to expand...
Click to collapse
Does the screen look like this before applying the module? Or only after installing the module?
Can the ringer and notification volume change independently? I just want to know how much of the module is in effect.

That is after. When I lower my volume for ringer only it takes notifications and system sound and mutes it all together. Now I use automated profiles for ringer volume increase to max early morning to receive only important calls, but unfortunately when ringer gets maxed out it also maxes my notification, system and Im trying to avoid that.

DRACONIANDRAGON said:
That is after. When I lower my volume for ringer only it takes notifications and system sound and mutes it all together. Now I use automated profiles for ringer volume increase to max early morning to receive only important calls, but unfortunately when ringer gets maxed out it also maxes my notification, system and Im trying to avoid that.
Click to expand...
Click to collapse
Do you have a link to the ROM you're using?

http://forum.xda-developers.com/showthread.php?t=2320041
[ROM][GB27] Project X v3.1 {Team Rejectz}(Updated 8/11/13)

DRACONIANDRAGON said:
http://forum.xda-developers.com/showthread.php?t=2320041
[ROM][GB27] Project X v3.1 {Team Rejectz}(Updated 8/11/13)
Click to expand...
Click to collapse
I found that Samsung has changed too much codes in the SecSettings.apk that it's significantly different from the AOSP version. This module is not compatible with it anymore.

Working on xperia z, but an annoying problem, the icon is white on a white background. Could you make a black version?
Sent from Z Beast

Related

[ROM][INTL4.0] DrEaM Ultra (Port YP-GB70 for YP-G1) (6/26/12) Rls:2.2

​DrEaM Ultra latest version: Rls:2.2​The firmware is collected on the basis of: GB70KRKPL Deodex (app, framework, lib, media). Other parts of the firmware from the YP-GB1, and YP-G1.
Works under any kernel CWM (YP-G1) and Korean versions of kernels including Tegrak Build 39 KPC.
DrEaM Ultra Rls:1.0
- FM radio - GT-I9000
- The clock on the center of the lock screen
- Russification
- The changed settings, the ability to change the Wallpaper on lock screen
- The modified system sounds
- Possibility to connect an ad-hoc wi-fi
Click to expand...
Click to collapse
DrEaM Ultra Rls:2.0:
- PowerMenu (+screenshot)
- Default Themes STOCK ROM (there is no mods) and choice modified Themes ICS in AROMA Installer
- Swipe to Remove Notification
- the screen brightness slider
- MusicPlayer (GT-I9000)
- High performance
- Tweak Init.d
Click to expand...
Click to collapse
DrEaM Ultra Rls:2.1:
- French language
- A choice of 6 bootanimation in AROMA Installer
- busybox 1.19.3
Click to expand...
Click to collapse
DrEaM Ultra Rls:2.2:
- new design of the Xperia in the style of the ICS.
- Lidroid panel in the design of ICS, the Xperia.
- the all clear button notification in the curtain appears at the bottom of the notification.
- added Xperia bootanimation, the choice of 7 bootanimation in AROMA Installer
- Voodoo Control
- Monkey patched fonts, host
- Fix GPS
Click to expand...
Click to collapse
Installation:
Install as a zip update through CWM (of cource, you need a CWM kernel (^__^))
Installation process provided by AROMA Intaller
If you have troubles with ROM (like bootloops or lags), wipe data (through CWM)
.
Click to expand...
Click to collapse
Download: DrEaM Ultra Rls:1.0
Download: DrEaM Ultra Rls:2.0
Download: DrEaM Ultra Rls:2.1
Download: DrEaM Ultra Rls:2.2- NEW
***
Thank you for your help in testing: king212112, Pro_ [Noob], xap4oru, Воанергес
Problem: I don't know running the firmware on YP-G1[USA] and the YP-GB1.
***
Another brightness slider ICS and Xperia:
DrEaM Ultra Rls:1.0
DrEaM Ultra Rls:2.0 (modification theme ICS)
Overclocking the CPU 1.2
DrEaM Ultra Rls:2.2 (modification theme ICS and Xperia)
ICS
good job for people earning YP-GB1.
I have a YP-GB70 and i see you mention a port from GB70KRKPL Deodex (app, framework, lib, media) Firmware.
Can you share the link where you get this firmware available? This in order we use it for our device.
Many thanks
Is it possible to add French language to it please?
Thanks
Sent from my GT-I9000 using xda premium
lolo9393 said:
good job for people earning YP-GB1.
I have a YP-GB70 and i see you mention a port from GB70KRKPL Deodex (app, framework, lib, media) Firmware.
Can you share the link where you get this firmware available? This in order we use it for our device.
Many thanks
Click to expand...
Click to collapse
The firmware of the YP-GB70 STOCK ROM Mods from the DrEaM Ultra 2.0 fit YP-GB70, open the zip (mods\theme\ics) and replace the files with myself
zaclimon said:
Is it possible to add French language to it please?
Click to expand...
Click to collapse
I'll try to add French language in the next build.
Sorry for my English.
Thanks for your answer.
rgds
zaclimon said:
Is it possible to add French language to it please?
Thanks
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
You can have it using More Locale 2 if you don't want to wait
Thanks for you Work Smok
It's really fast OO the fastest rom I ever had
DrEaM Ultra Rls:2.1:
- French language
- A choice of 6 bootanimation in AROMA Installer
- busybox 1.19.3
Click to expand...
Click to collapse
Can you add the Haptic feedback in the settings as in the normal one ?
And also the possibility to set the Brightness to automatic
Thanks for your great work
Dark_Balor said:
Can you add the Haptic feedback in the settings as in the normal one ?
And also the possibility to set the Brightness to automatic
Thanks for your great work
Click to expand...
Click to collapse
I remember while creating my ROMs that in framework-res.apk in bools.xml there is a line to enable automatic brightness. The 5.0 doesn't have a light sensor so the that line is probably 'false'. You could decompile the apk and take a look if you want.
klin1344 said:
I remember while creating my ROMs that in framework-res.apk in bools.xml there is a line to enable automatic brightness. The 5.0 doesn't have a light sensor so the that line is probably 'false'. You could decompile the apk and take a look if you want.
Click to expand...
Click to collapse
I'm interested yes
This feature is quite useful when going out/in .
By the way I discover that the GPS lib (/system/lib/hw) is not the same on this ROM as in the stock 4.0 one. The gps is working ... in a strange way, it's telling me he have 2 satellites ... with one of a SNR of 200 ... knowing that I never got upper than 40 ... and it can localize me with only 2 satellite. It's like it's aggregating the satellites.
I replaced the lib by the one of the 4.0, and now everything is back to normal I advice you to do it also in your next release.
Really nice Rom its awesome fast but i dont have a Brightness slider in the notification bar and i cant Set it to automatic because there is no setting for it. Sorry for my bad english
Gesendet von meinem Nexus S mit Tapatalk 2
ChaosChris said:
Really nice Rom its awesome fast but i dont have a Brightness slider in the notification bar and i cant Set it to automatic because there is no setting for it. Sorry for my bad english
Gesendet von meinem Nexus S mit Tapatalk 2
Click to expand...
Click to collapse
You used the design of ICS or STOCK ROM? Mods are all included with the design of ICS. Automatic brightness is not in 5.0.
Dark_Balor Can download lib (/system/lib/hw) to compare ?
Can you add the Haptic feedback in the settings as in the normal one ?
Click to expand...
Click to collapse
Did not understand the question (, bad translator translates, can make a screenshot??
Sorry for my English
S_m_O_k said:
You used the design of ICS or STOCK ROM? Mods are all included with the design of ICS. Automatic brightness is not in 5.0.
Dark_Balor Can download lib (/system/lib/hw) to compare ?
Did not understand the question (, bad translator translates, can make a screenshot??
Sorry for my English
Click to expand...
Click to collapse
ICS design.
/system/lib/hw of 4.0 : http://www.mediafire.com/?7q8slherwnba8c8
You'll see that only the file gps.s5pc110.so is different (33,8 Kb)
About haptic feedback. When you are using one of the capacitor button, the device should be vibrating.
Edit : for the Auto brightness I used that trick : http://forum.xda-developers.com/showthread.php?t=1599378 it seems to be working
S_m_O_k said:
You used the design of ICS or STOCK ROM? Mods are all included with the design of ICS. Automatic brightness is not in 5.0.
Dark_Balor Can download lib (/system/lib/hw) to compare ?
Did not understand the question (, bad translator translates, can make a screenshot??
Sorry for my English
Click to expand...
Click to collapse
I used the ics design
Could you make the Rom Multi language? Or can you add german language?
Thanks for this great Rom!
Gesendet von meinem Nexus S mit Tapatalk 2
Just letting OP know this will work on US model 4.0 player, just use a US kernel.
one issue I have found is somehow voodoo sound is partially broken, its settings won't stick. also had it freeze and reboot from camera issues.
Update: reinstalled after doing a full wipe cache, wipe data/factory reset and wipe dalvick. now voodoo seams to be working right but I'm getting these random freezes.
Dark_Balor said:
About haptic feedback. When you are using one of the capacitor button, the device should be vibrating.
Edit : for the Auto brightness I used that trick : http://forum.xda-developers.com/showthread.php?t=1599378 it seems to be working
Click to expand...
Click to collapse
Auto brightness, works in lidroid panel.
gps correct.
vibrating it is possible will not work (.
ChaosChris wipe do?
S_m_O_k said:
Auto brightness, works in lidroid panel.
gps correct.
vibrating it is possible will not work (.
ChaosChris wipe do?
Click to expand...
Click to collapse
When i wipe the data Partition then i lose my home Button :/ i think in /data or in /dbdata is a config file or so that controls the home Button.
Gesendet von meinem Nexus S mit Tapatalk 2
S_m_O_k said:
Auto brightness, works in lidroid panel.
gps correct.
vibrating it is possible will not work (.
ChaosChris wipe do?
Click to expand...
Click to collapse
Where can I find lidroid panel ?
For GPS, the lib is incorrect but working, just not giving the right number of satellite.

[MOD][XPOSED][2018/2/25 3.20]Android Phone Vibrator

This Xposed module can vibrate the phone on different call status. It should work on ICS to O phone apps.
Features:
1. Vibrate when an outgoing call is connected
2. Vibrate when an incoming call is connected
3. Vibrate when an incoming call is waiting
4. Vibrate when a call is ended
5. Vibrate during outgoing call at 45 second mark of every minute (default is off)
6. Vibrate once at fixed time after outgoing call is connected (default is off)
7. Any of the above features can be turned on/off
8. Vibration intensity can be adjusted
Requirements
1. Your phone must be rooted
2. Xposed framework must be installed first http://forum.xda-developers.com/showthread.php?t=1574401
3. Xposed library 2.2 is required
Instructions
Install the module
Run Xposed Installer and enable the module Vibrate on connected call, ended call and new call waiting for Android phones
Reboot the phone
Credits
kantry123 - for testing with Xperia U phone
Source code
You can find source code for this module from GitHub here.
Download
Xposed Module Repository
Change Log
Code:
3.20
- Fix the issue that settings are not applied for Nougat and higher devices
3.13
- Add support for Android 6
3.12
- Fix incorrect vibration time when Every Minute is selected on Lollipop
3.11
- Hangup vibration now works even when call is not connected on Lollipop
3.10
- Add support for call waiting on Lollipop
3.00
- Add support for Lollipop (including Xperia phones)
- Strongest vibration intensity is now 5
2.53
- Improved exception handling
2.52
- Update translation (Thanks to Jose Artuñedo for Spanish)
2.51
- Update translation (Thanks to Jan Žák for Czech)
2.50
- New feature to adjust state change threshold for outgoing call. Use it if your phone does not vibrate on outgoing call. Check FAQ below for details.
- New option to enable additional debug info
- Update translation
2.40
- New feature to adjust vibration intensity
- New localisation for Traditional Chinese for Hong Kong
2.31
- Updated localisation for Simplified Chinese (thanks to liveasx)
- New localisation for Traditional Chinese
2.30
- Second mark of every minute can now be changed
- New feature to vibrate once at fixed time after outgoing call is connected (default is off)
2.20
- New feature to vibrate the phone during outgoing call at 45 second mark of every minute (default is off)
- New localisation for Simplified Chinese (thanks to liveasx)
2.12
- Fix issue that vibrate on incoming call might not work on some phones
2.11
- Add new feature Vibrate when an incoming call is waiting
- Add new feature Vibrate when an incoming call is connected
- All features can be turned on/off
2.00
- Completely rewritten based on ICS/JB AOSP source code using CM ROM logic. Now should work on most Android phone apps.
1.11
- Added support for ICS ROM. Now should work with more Xperia phones.
FAQ
Q: My phone does not vibrate when an outgoing call is connected.
A: It's possible that the time of state change for your phone after an outgoing call is connected is slower than expected. This module has an assumption that this state change should happen in no longer than 200ms. In version 2.50, there's a new option to change this threshold. But first you need to know how much time your phone need. Following the procedures below:
1. First Enable Debug Info (new option available in 2.50 also) in setting.
2. Make some calls.
3. Check the Xposed log file under /data/data/de.robv.android.xposed.installer/log/.
4. Look for the line beginning with "cstate:ACTIVE". The value after "durationMillis" is the amount of time your phone needs for the state change for outgoing call. This value might varies so make several calls and mark the largest value.
5. Set the threshold to something higher than the largest value you found.
6. Try calling out again and see if it vibrates.
is there anyway to make this work with other phones that are on 4.2 builds ? or is this just exclusive to your sony model phone.
SystemErrorOne said:
is there anyway to make this work with other phones that are on 4.2 builds ? or is this just exclusive to your sony model phone.
Click to expand...
Click to collapse
I haven't checked out the source code for AOSP dialer. But if Xperia phone app is using similar code, then this module should also work in AOSP and other similar dialer.
Technically, this module only call the system vibrator after the method hideCallingProgress in the LargeCallView class. So if this class and method exist, then it mod should work.
You can try it and report back your result.
itandy said:
I haven't checked out the source code for AOSP dialer. But if Xperia phone app is using similar code, then this module should also work in AOSP and other similar dialer.
Technically, this module only call the system vibrator after the method hideCallingProgress in the LargeCallView class. So if this class and method exist, then it mod should work.
You can try it and report back your result.
Click to expand...
Click to collapse
Well considering that Im into designing and not so familiar with coding I will attempt to do it myself but feel free to give me a starting point
Thanks for the response :good:
SystemErrorOne said:
Well considering that Im into designing and not so familiar with coding I will attempt to do it myself but feel free to give me a starting point
Thanks for the response :good:
Click to expand...
Click to collapse
Actually you can check out the source code from GitHub if you want to know how this module works. It's just a few line of codes.
But again you can try this module to see if it works on your phone first. I have a feeling that it works too.
itandy said:
Actually you can check out the source code from GitHub if you want to know how this module works. It's just a few line of codes.
But again you can try this module to see if it works on your phone first. I have a feeling that it works too.
Click to expand...
Click to collapse
do you have a G+ account ?
SystemErrorOne said:
do you have a G+ account ?
Click to expand...
Click to collapse
Just PM
This did nothing, no effect on my Xperia T.
ironwick said:
This did nothing, no effect on my Xperia T.
Click to expand...
Click to collapse
Can you give me the link to download your ROM. I can take a look.
Can you make something for my xperia S with stock JB 4.1.2?
Regards
Hi
Well, does not work on Xperia mini pro (stock 4.0.4 rom).
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
itandy said:
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
Click to expand...
Click to collapse
2 downloads but no reply? Does the new version works?
itandy said:
2 downloads but no reply? Does the new version works?
Click to expand...
Click to collapse
nope bro... i replied to ur market comment but u did'nt respond
even the above version doesn't work on xperia U stock ics rom
even i tried on jb 4.1.2 not working
any other fix..!!!!
regards
kantry123
itandy said:
Guys, please try out this version if the Play store version is not working for you. I checked some Xperia ICS ROM and found that a different method is called which is different from JB. Anyway, I made this version trying to support both methods. Please report your result. Thanks!
Click to expand...
Click to collapse
Hi, I'll test it and will able to say it it works.
Bye.
kantry123 said:
nope bro... i replied to ur market comment but u did'nt respond
even the above version doesn't work on xperia U stock ics rom
even i tried on jb 4.1.2 not working
any other fix..!!!!
regards
kantry123
Click to expand...
Click to collapse
I downloaded this Xperia U ICS ROM. Is it what you're using? Can you also give me the link to your JB ROM?
itandy said:
I downloaded this Xperia U ICS ROM. Is it what you're using? Can you also give me the link to your JB ROM?
Click to expand...
Click to collapse
Stock rom ICS here is the link
jellybean rom link is here
(THE ABOVE JELLYBEAN ROM WAS MADE BY ME...ACTUALLY CUSTOM JELLYBEAN)
BUT STILL DOESN'T WORK AT ALL..!
REGARDS
kantry123
kantry123 said:
Stock rom ICS here is the link
jellybean rom link is here
(THE ABOVE JELLYBEAN ROM WAS MADE BY ME...ACTUALLY CUSTOM JELLYBEAN)
BUT STILL DOESN'T WORK AT ALL..!
REGARDS
kantry123
Click to expand...
Click to collapse
I've made a test build to write some debug info to the Xposed log. Can you install it, reboot the phone, try a call and wait until it's connected. Then send me the file from /data/xposed/debug.log. Thanks!
itandy said:
I've made a test build to write some debug info to the Xposed log. Can you install it, reboot the phone, try a call and wait until it's connected. Then send me the file from /data/xposed/debug.log. Thanks!
Click to expand...
Click to collapse
Here is the log file
Have a look..I did all ur mentioned steps above
https://app.box.com/s/mnxopqb7f67j2sh3slou
Pls...do have a look & reply
Sent from my ST25i using XDA Premium 4 mobile app

[XPOSED] neXus Navbarz v2.3 (26/05/14)

neXus
navbarZ
Motivation:
i just learned using xposed module and creating them from scratch. With it i also learned about creating android apps and java.
So here i present a month of effort, neXus navbarz.
Click to expand...
Click to collapse
How to Use:
1. Install and enable the module in Xposed Framework
2. Launch app and select a navbar
3. Soft Reboot and enjoy !
Click to expand...
Click to collapse
DOWNLOADS:
See attachment
COMPATIBILITY:
Android 4.0+
AOSP & Stock ROMs supported
HTC Sense, Touchwiz New &
MDPI devices not supported
Click to expand...
Click to collapse
Changelog:
v2.3
- Fixed a selection bug of Roboto Style
- Fixed XHDPI resolution. Hopefully.
V2.2
- Fixed some SuperUser Permission bug
- Added new Style by Prazaar
- Added proper support for HDPI resolution
for 2.1
- New DT style softkeys added
- Navbar Height presets
- Navbar Width presets
- Soft Reboot Button
Click to expand...
Click to collapse
CREDITS:
rovo89 - For the best thing ever, apart from custom roms
atticus182 - softkeys collection
matthew0776 - for DT softkeys
hamzahrmalik - For guiding and helping
Click to expand...
Click to collapse
Is this only for nexus or will this work on any device?
gridironbear said:
Is this only for nexus or will this work on any device?
Click to expand...
Click to collapse
my nick is neXus.... not for only nexus phones, its for all phones.... all romz... just check and let me know if it doesnt work for you.
i only tested on CM11 and SLIMKAT
Works quite well on my tablet, the nexus buttons are a little small,
Sent from my TF300T using Tapatalk
Not working on GS4 4.4 Stock kitkat
gridironbear said:
Not working on GS4 4.4 Stock kitkat
Click to expand...
Click to collapse
Give me your systemui.apk
Sent from my C5303 using Tapatalk
Wonderful work!! Has also transparent option? Is it possible to add a botton to hide navbar(for watching movies...) Thanks in advance.!
There is no "Nexus Navbarz" in Xposed Download (not installed) list.
This module havê the navbar size option?
Nice work
Enviado do meu Nexus 7 através de Tapatalk
i have small nav bar size..... also i use 5 nav bar options, can yhu make for 5 nav bars?
nice work!
Worked like a charm for KK 4.4.2 on MotoG XT 1033 - Brazilian custom rom ( almost original/AOSP )
Would be nice if you can add other options as well, with other beautifull colors, and icons just like LG G2 has ...
For those who asked about the size, just changed with GravityBOX and no problems just liked
BTW, is it possible to add a restartUI after choosing or changing styles ?!
Thx
can u please include an option to adjust nav bar hieght...
neXus PRIME said:
i just learned using xposed module and creating them from scratch. With it i also learned about creating android apps and java.
So here i present a month of effort, neXus navbarz.
Just enable in xposed modules list, select a navbar style, and reboot.
See attachment for download.
NOTE:
I ONLY TESTED ON CM11 and SLIMKAT. Should work on all phones with AOSP based ROMz, and Xperia roms as well. If it doesnot work on any rom, let me know.
Credits:
atticus182 - softkeys collection
hamzahrmalik - For guiding and helping
Click to expand...
Click to collapse
Dear Dev
Can you please add icons for the (keyboard hide) button as the picture?
Thank you for the hard work
Good work! Can you please add text soft buttons too?
couldn't get it to work on my t0lte running latest Omni nightlies
Works perfect, after change need re-boot (soft is enough) :good:
But I've got a question. Can you add stock theme? Without reflect?
Device - Xperia T, Sony Stock 4.3 .199
Work fine in nexus 7 with slimkat ROM.
Cool module! Nice work. Would this theoretically (now or in a future version) make it possible to restore tablet UI on AOSP KitKat? There are many folks who prefer the old tablet mode with the buttons on the left.
Do you need to root for this?
TXRaunchy said:
Do you need to root for this?
Click to expand...
Click to collapse
You need root to run Xposed Framework, and this is an Xposed Framework module, so, yes, you need root.

[Xposed][MODULE][4.0+] XInstaller

Various tweaks for Package Installer.
Description
Basic description: http://repo.xposed.info/module/com.pyler.xinstaller
Advanced description of app and all module features: http://pyler.wen.ru/XInstaller/Help.html
Translations
https://crowdin.com/project/xinstaller
For detailed description read description and changelogs in Xposed repo.​
Thanks
- @GermainZ, @M66B, @hamzahrmalik, @rovo89, @MohammadAG, @caspase, @moneytoo and others who help me with coding
- translators, contributors
Contributions
Module is open source. Check it here:
https://github.com/pylerSM/XInstaller
Donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=6NTYA2HMPQHVW
DOWNLOAD:
http://repo.xposed.info/module/com.pyler.xinstaller
This goes without saying, but this module is a huge security risk if always enabled. After using it for whatever you want to use it for, disable it and reboot.
Sent from my HTC One_M8 using Tapatalk
Yes, it should not be always enabled. Enable it only when you need it.
What risks?
Thx, useful to switch between DEBUG and RELEASE builds :good:
A feature like 'enable for 1 minute' would be nice.
A simple ui with justa checkbox for the enabling/disabling of the module would bê a good adition.but not sure if it's possible
For what? You can enable or disable module in Xposed Installer.
pyler said:
For what? You can enable or disable module in Xposed Installer.
Click to expand...
Click to collapse
But after enabling /disabling you need to reboot, witch is the same as you unistalling the original apk and installing the New one with diferente signature
The only difference being you would keep the data
But it's only my personal opinion .
Yes, hm. It sounds well. I will do it.
RSDamasceno said:
What risks?
Click to expand...
Click to collapse
Someone who modifies a trusted app like Google play store with malicious codes can install it over the real app which has an encrypted signature
@pyler can we get gingerbread support plz?
v1.1:
Changes:
- added settings to control APK signature check (just click on module in Xposed Installer to launch module settings)
- support for android 2.3
pyler said:
v1.1:
Changes:
- added settings to control APK signature check (just click on module in Xposed Installer to launch module settings)
- support for android 2.3
Click to expand...
Click to collapse
Thank you for this module, but the setting in app is invalid, whenever I checked or unchecked the box in app, I must reboot device to make it work successfully, just like enable/disable this module in xposed installer then reboot.
Actually, I want to toggle this function easily, just bypass the annoying reboot process. It it technically possible?
This app screwed up something on my Nexus 5. I'm running CM11 and when I rebooted it showed basically what it did when I first installed the ROM. I used the TWRP file manager to delete the apk and everything went back to normal. Any ideas?
Sent from my Nexus 5 using Tapatalk
Same to me. Running this in my Galaxy S4 CM11 4.4.3 and after reboot I've "lost" all applications other than system ones. Then disabled xposed through recovery and got everything back but all Accounts section was lost.
Funny, but some time ago I made a similar module for development purposes (XDisableAppSignCheck on github).
This is very handy in development. But you should never use it in production! Especially on devices with important data.
This module gives me bootloops. Galaxy s3 cm 4.4.3
btw, removed setting because it doesnt work (can't work in initZygote) - v1.2
I dont know why it bootloops on CyanogenMod.. I tested it on stock Android 4.4.3 & TouchWiz 4.2.2 and all works. logs?
pyler said:
btw, removed setting because it doesnt work (can't work in initZygote) - v1.2
I dont know why it bootloops on CyanogenMod.. I tested it on stock Android 4.4.3 & TouchWiz 4.2.2 and all works. logs?
Click to expand...
Click to collapse
First time posting logs. Hopefully they're what you need. https://mega.co.nz/#!UEUGSZwY!D-SQ6U_GwP9ULxNV7k7rsFOvs1iRwpKQ4oXOh4DPAVY
Or https://www.dropbox.com/s/1mnsxynjyz2sro7/2014-06-17_00.50.zip
Sent from my GT-I9300 using Tapatalk 2

d618 + any xposed navbar remover

long story short ,every xposed navbar remover/tweaker mess up with several system apks (contacts, galery, messages and so on) other xposed modules function as espected on my wife's d618, i think the problem lies on the dualsim changer button, so, is there any solution/workaround for this issue as she hates navbar (as i do) and wanna use pie controls
as far as this post is written I've tried with gravity box and lg pie support xposed modules with no luck, i always get some important application messed up
phone runs on stock, rooted 4.4.2 rom with no custom recovery
any help is appreciated
Sent from my LG-D805 using XDA Free mobile app
Try this : https://play.google.com/store/apps/details?id=it.ptoti.g2_tweaksbox&hl=tr
or this : https://play.google.com/store/apps/details?id=com.tinyroar.xposedlgg2&hl=tr
Pondera said:
Try this : https://play.google.com/store/apps/details?id=it.ptoti.g2_tweaksbox&hl=tr
or this : https://play.google.com/store/apps/details?id=com.tinyroar.xposedlgg2&hl=tr
Click to expand...
Click to collapse
same result, either way immerse me module seemed to fit her needs, it isn't pie but doesn't take screen away
sent from the grey stuff inside my skull

Categories

Resources