Hi
I am using omega 4.2.2 latest built. The phone gets stuck/hanged whenever I connect mobile data. Sometimes it works fine but stucks when I use twitter or Facebook app.
Why is that so?
And can I downgrade to omega 4.1.2 ?
Sent from my GT-I9300 using xda premium
Sent from my GT-I9300 using xda premium
Try a different baseband
Sent from my GT-I9300 using Tapatalk 4
Don't know much about the basebands. I think every rom has a different baseband. So you mean try some other rom ? Stock or custom ?
Sent from my GT-I9300 using xda premium
Alright did some research and yes I got the idea. Its baseband problem. I am gona try XXEMC6.
But can I downdowngrade from jb 4.2.2 to jb 4.1.2 after a full wipe?
Sent from my GT-I9300 using xda premium
Why are you downgrading the rom? I said try another baseband. Not try another rom.
Sent from my GT-I9300 using Tapatalk 4
Because I cannot find any other than XXUFME7 baseband for jb 4.2.2
I thought it came with only one baseband.
I checked wanamlite and omega. They both come up with XXUFME7.
Can you recommend some roms ?
Sent from my GT-I9300 using xda premium
hero420 said:
Because I cannot find any other than XXUFME7 baseband for jb 4.2.2
I thought it came with only one baseband.
I checked wanamlite and omega. They both come up with XXUFME7.
Can you recommend some roms ?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
My point is you can use ANY baseband. It is not tied or related to the ROM in any way. There's hundreds of basebands available to flash in the general forum.
Now you are making sense. So I had to install the rom first or the baseband first then any rom?
Baseband and a kernel is the same thing ?
Sent from my GT-I9300 using xda premium
hero420 said:
Now you are making sense. So I had to install the rom first or the baseband first then any rom?
Baseband and a kernel is the same thing ?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Please follow the link in my signature to general > sticky roll-up thread. Read "Understanding the basics before rooting". I put a lot of effort into answering all your questions in advance there. Please read it, you'll find it very informative.
Changed my kernal using omega v47
No freezes anymore. The 4.2.2 kernal is so unstable.
Sent from my GT-I9300 using xda premium
Related
Friends, i flashed the ics cyanogenmod rom by lupohirp..
But the problem i am facing is that when my phone starts first time after booting, it doesn't detect/read my sim card.. my BaseBand turns as UNKNOWN... then i have flash my cyanogenmod rom and everthing works fine on it...can somebody help plz and tell me what to do about this UNKNOWN BaseBand issue..?
Sent from my LG-P500 using xda premium
You are on the old basband and that's why you get unknown!
So you can check out dk.notor tutorial on how to change the basband or go to the first page in the generalCM9 topic and folow the instructions(can't provide links now but you should be able to find them)
Sent from my LG-P500 using XDA App
Bro, how do we check if we are on old baseband or new baseband..?
Sent from my LG-P500 using xda premium
And how to switch to new baseband...?
Sent from my LG-P500 using xda premium
God i told you what topics to search for and you can read them.
If you had any rom except these ones cm7Nightly/cm7.2 N-series/cm9/official lg 2.3 then you are on old baseband and you have to move to the new one-read how.
Sent from my LG-P500 using XDA App
K.. thanks paul.
Sent from my LG-P500 using xda premium
Good luck,also don't forget to put franco3.0 testing kernel if you decide to stay on cm9-it will perform better-you can also find it in the first post on generalCm9 thread
Sent from my LG-P500 using XDA App
@pqul678..I found how to upgrade baseband but i can't find the General cm9 thread..
Sent from my LG-P500 using xda premium
Friends, i have to switch to a rom(cm9 by lupohirp) that needs new baseband, and i am currently on old baseband.. i have big doubt.. should i upgrade to new baseband first and then flash new rom or should i first flash new rom and then baseband.. plz tell..
Sent from my LG-P500 using xda premium
It doesn't matter wich you do first
Sent from my LG-P500 using XDA App
Is flashing new baseband tough/risky...? :/
Sent from my LG-P500 using xda premium
[url[http://forum.xda-developers.com/showthread.php?p=15250036
[/url]
Howz this..?
Sent from my LG-P500 using xda premium
I don't want to be mean, but I think you should stop asking so many questions and have some faith in yourself
If you follow the instructions in that thread, you will have the new baseband in no time.
Just a question. There are numerous sites on the internet that tells you how to install cm9 on sgs2. Others say that you dont need to flash a leaked ics. Others need you to install . Please help thanks.
Sent from my GT-I9100 using xda premium
Go by the guide on CM9 website. I played it safe and flashed the tar version via PDA in odin. Once that's installed you can then update to latest nightly. I've never had any issues with that process. All the best.
Sent from my GT-I9100 using xda premium
So sir did you install first a leaked ics or not? Thanks
Sent from my GT-I9100 using xda premium
Erm not sure I'm a bit of a flasher- holic. More than likely I was on a 4.0.4 based custom rom. If you do full wipes and format system then flash via odin I'm sure you will be fine as that's what I did. Please read CM9 guide though.
Sent from my GT-I9100 using xda premium
I went from stock GB to CM9 nightly without any problem
Well done mate
Sent from my GT-I9100 using xda premium
Ok thanks sir imma download hehe
Sent from my GT-I9100 using xda premium
I recently flashed revolt 2.5 job 4.1.1 and. all was fine. I rebooted the phone once and when it turned on the scree is smaller, I can see black on the right and left side of the screen that is unused... any help would be appreciated
Sent from my GT-I9100 using xda premium
FuN2OwN said:
I recently flashed revolt 2.5 job 4.1.1 and. all was fine. I rebooted the phone once and when it turned on the scree is smaller, I can see black on the right and left side of the screen that is unused... any help would be appreciated
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Sounds as it could be an issue with the graphics/Mali drivers.
Maybe you should read the ROM thread and flash another ROM as long as this problem is not solved.
Good luck !
I tried flashing rootbox ROM and ressurection remix but the screen is still smaller. Any suggestions?
Sent from my GT-I9100 using xda premium
FuN2OwN said:
I tried flashing rootbox ROM and ressurection remix but the screen is still smaller. Any suggestions?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
what kernal are you using?
When the problem happened I was using siyah kernel
Sent from my GT-I9100 using xda premium
FuN2OwN said:
When the problem happened I was using siyah kernel
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Siyah kernal didnt have the new Mali drivers that some of the jelly bean ROMS needed. Try flashing this kernal : its based on siyah with latest Mali drivers http://forum.xda-developers.com/showthread.php?t=1617219
Edit : you need the version with new Mali (Dorimanx 7.4) direct link : http://dorimanx.shine.sk/kernels-jb/Kernel_Dorimanx-V7.4.2-JB-MALI-17-11--25-10-12-SGII-PWR-CORE.zip
Does the kernel work with root box jb 4.1.2?
Sent from my GT-I9100 using xda premium
FuN2OwN said:
Does the kernel work with root box jb 4.1.2?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yes it should
any update?
Flashed the kernel didn't help if anything it made the phone lag a bit. Thx antways
Sent from my GT-I9100 using xda premium
FuN2OwN said:
Flashed the kernel didn't help if anything it made the phone lag a bit. Thx antways
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ahh sory bout that, i would say try flashing stock firmware/kernal using ODIN. jopefully that will fix the issue
I have a rooted galaxy s2 with an xwlp7 kernel. The jelly bean rom i saw was 4.1.2 XXLSJ. Will this work with my kernel?
Sent from my GT-I9100 using xda premium
The kernel you currently have has no relation to a different ROM which has its own kernel.
Or to directly answer your odd question, no, your current non-JB kernel certainly will not work with a JB ROM.
But if you mean you want to install the JB-leak (or didn't you mean that?): that is possible. Your current kernel will be replaced.
Sent from the Matrix
Yes I meant the leaked version. Was just wondering if it can be done before attempting.
Sent from my GT-I9100 using xda premium
Spartan199 said:
Yes I meant the leaked version. Was just wondering if it can be done before attempting.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes that is possible. You can flash the official one, or one from a developer (I personally would recommend Neatrom). Good luck.
Sent from the Matrix
I will take a look. Thank you for clearing my doubts
Sent from my GT-I9100 using xda premium
I currently have a s3 gt i9300 on XXEMC2 firmware. I have the odd random reboot once in a while. Im rooted and jist noticed XXEMD3 os available. Is it woth while upgrading?
Sent from my GT-I9300 using xda premium
adie1234 said:
I currently have a s3 gt i9300 on XXEMC2 firmware. I have the odd random reboot once in a while. Im rooted and jist noticed XXEMD3 os available. Is it woth while upgrading?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's always worth updating, yes. Newer releases have newer fixes.
Also how did you miss this sticky thread?
[READ THlS FlRST] POST QUESTIONS IN THE Q&A SECTION AND NOT HERE!!!!
No idea. .. .lol jis spotted it today by chance...
Sent from my GT-I9300 using xda premium
Will the fw be fine to flash as when I started the download it said it was for turkey. Lol
Sent from my GT-I9300 using xda premium
Yes you can flash for any country so long as the model is correct. MD3 isn't even the latest anymore. ME2 is (which you can download for Netherlands or Norway).
You'll lose root when you flash Via Odin.
Any particular reason you won't go for something like Wanam Lite ROM, flash through recovery?
Still a sort of noobie...not really had the guts to flash any rom yet
Rooted but on stock XXEMC2
Sent from my GT-I9300 using xda premium
adie1234 said:
Still a sort of noobie...not really had the guts to flash any rom yet
Rooted but on stock XXEMC2
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Its no harder than using Odin. In fact, its probably easier.
Any sort of link to that rom as theres tons of threads
Sent from my GT-I9300 using xda premium
It's in "Android Development"
Cheers
Sent from my GT-I9300 using xda premium
adie1234 said:
Cheers
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
As a rule of thumb,
"Galaxy SIII Android Development" contains:
Samsung TouchWiz based custom ROMs
Unofficial CM, AOKP builds
"Galaxy SIII original Android Development" contains:
Samsung Kernels
Official CM, AOKP (AOSP) builds
AOSP Kernels