Related
This ROM has been superceded by MCR 1.5 here.
P
aad4321 said:
Sweet, i might give it a shot. quick question tho... will this wipe the device?
Click to expand...
Click to collapse
Modacp said:
I'm pleased to present my MoDaCo Custom Nexus One ROM! No 'wipe' is required to use this ROM.
Click to expand...
Click to collapse
Reading comprehension much?
aad4321 said:
just to confirm, wavesecure add on is a anti theift program which is a monthly service?
Click to expand...
Click to collapse
No, there is no monthly service charge...at least not yet. I have been using wave secure for a little while now, and for a 3rd party security app its pretty damn good.
I tried to flash and got this:
Code:
E:No space left on device
E:Error writing Boot:
E:Failure at line 369:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
I tried to reboot and it wouldn't boot, so I pulled the battery and went back into recovery and tried to apply the NANDROID backup, seemed to apply fine, but now it always boots into bootloader, no matter what I do. I can still make it into recovery so it isn't all lost, but I can't do anything else from there.
Bizarre, never seen an error like that before!
What happens if you try to re-apply the ROM?
P
ccunningham83 said:
I tried to flash and got this:
Code:
E:No space left on device
E:Error writing Boot:
E:Failure at line 369:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
I tried to reboot and it wouldn't boot, so I pulled the battery and went back into recovery and tried to apply the NANDROID backup, seemed to apply fine, but now it always boots into bootloader, no matter what I do. I can still make it into recovery so it isn't all lost, but I can't do anything else from there.
Click to expand...
Click to collapse
did you wipe then restore nandroid?
anyone get tether working on this rom?
Only wireless tether is supported at the moment. Wired tether coming in a future release.
P
modaco said:
Only wireless tether is supported at the moment. Wired tether coming in a future release.
P
Click to expand...
Click to collapse
neither wireless or wired working for me..
Strange, wireless seems to be working for me I think?
P
wireless tethering say "please wait while starting" but never starts...
any suggestions?
modaco said:
Bizarre, never seen an error like that before!
What happens if you try to re-apply the ROM?
P
Click to expand...
Click to collapse
Re-Applying the ROM gets the same result.
I did Wipe and try to re-apply and also wipe and Nandroid. All got me nowhere. I ended up getting it fixed by applying Cyanogens Bacon1.img. I am really interested in your ROM though. Think maybe I got a bad download or something. I will try again and check the md5 sum this time.
my tether puts a signal out and all but i cant connect to it.. only get local
So after downloading the ROM again after the first one didnt work, I got this for the md5 checksum:
Code:
e04970294888313787d0b9d5cb370a12
Which is entirely different than what is posted on the MoDaCo Forum:
Code:
d537e42372a7239dfaf40846ef0b8b4e
However, I could be doing it wrong. This is the first time I tried using md5 checksums to verify a download. However I used two different utilitys to get the same checksum and I don't want to try to flash it again and have it mess up.
ccunningham83 said:
Re-Applying the ROM gets the same result.
I did Wipe and try to re-apply and also wipe and Nandroid. All got me nowhere. I ended up getting it fixed by applying Cyanogens Bacon1.img. I am really interested in your ROM though. Think maybe I got a bad download or something. I will try again and check the md5 sum this time.
Click to expand...
Click to collapse
I can help fix your problem and it is very simple. READ THE FIRST POST BY PAUL. DO NOT WIPE. Do a Nandriod backup then apply the update. Remember do not extract the rom file with I hope WINRAR, just rename update. Let me know if this solves it for you which it should. Kevin
kevinrirvine said:
I can help fix your problem and it is very simple. READ THE FIRST POST BY PAUL. DO NOT WIPE. Do a Nandriod backup then apply the update. Remember do not extract the rom file with I hope WINRAR, just rename update. Let me know if this solves it for you which it should. Kevin
Click to expand...
Click to collapse
Maybe I should have explained everything I did step by step, I did READ THE FIRST POST BY PAUL AND DIDN'T WIPE. Before I even tried flashing, I performed a Nandroid Backup. I booted into recovery, applied the update, got the error message I listed, tired to reboot, got stuck, pulled the battery, booted back into recovery, performed a wipe, reapplied the update, rebooted, still a no-go, rebooted back into recovery, performed a Nandroid restore, after it completed, rebooted, got stuck on bootloader screen, reloaded the ROM on the SD card, tried flashing again, still no luck, ended up flashing Cyanogens Bacon1.img to fix the problem.
I want to give it another try, but I may wait and find out if my md5 sum is correct or maybe try another link if someone post it up.
ccunningham83 said:
Maybe I should have explained everything I did step by step, I did READ THE FIRST POST BY PAUL AND DIDN'T WIPE. Before I even tried flashing, I performed a Nandroid Backup. I booted into recovery, applied the update, got the error message I listed, tired to reboot, got stuck, pulled the battery, booted back into recovery, performed a wipe, reapplied the update, rebooted, still a no-go, rebooted back into recovery, performed a Nandroid restore, after it completed, rebooted, got stuck on bootloader screen, reloaded the ROM on the SD card, tried flashing again, still no luck, ended up flashing Cyanogens Bacon1.img to fix the problem.
I want to give it another try, but I may wait and find out if my md5 sum is correct or maybe try another link if someone post it up.
Click to expand...
Click to collapse
Paul's rom's are only at modaco and I am pretty sure he does not allow other links for I only use his rom's and have one on my Hero Telus, AT&T 3G, and what I like most about them is he keeps them as close to stock as possible, a good thing, and just optimizes them.
Your not going to brick your n1 so I know your gun-shy now but try the link a few more times even and it will work. Also, delete or format your memory card so it the rom is at the root for this might have something to do with it. Want you to have a happy ending. Kevin
The zips are signed, if a download is corrupt it won't flash.
P
kevinrirvine said:
Paul's rom's are only at modaco and I am pretty sure he does not allow other links for I only use his rom's and have one on my Hero Telus, AT&T 3G, and what I like most about them is he keeps them as close to stock as possible, a good thing, and just optimizes them.
Your not going to brick your n1 so I know your gun-shy now but try the link a few more times even and it will work. Also, delete or format your memory card so it the rom is at the root for this might have something to do with it. Want you to have a happy ending. Kevin
Click to expand...
Click to collapse
I need to re-format my sdcard, I still have the three partitions from my G1. I will give that a try, but I am still unsure about the md5 sum issue. Not too worried about bricking the device after all I put my G1 through.
Thank you for posting here on XDA also
No matter what I do, I cannot get a single thing to flash anymore with CWM. I'm on the dark side rom, unlocked bootloader & rooted, 4.5.91, and using romracers 4.0.1.5 cwm recovery. I even tried tenfars and the one rom manager gives me, but the problem persisted. Is there any fix for this because it is getting VERY frustrating!
The only fix available would be to figure out what you've done. The CWM versions all work fine and don't require a fix. It's something at your end and with the information you've given, there's not much to go on.
It must corrupt the files when I transfer them from the computer to the phone. I've downloaded straight from the source and MANY other sources of the exact same rom/kernal/ect... and it all ends up not working. Is it better to download on the phone? Oh, missed one detail but I don't think it matters, I'm using a mac and when I download a file it auto unzipps, then I just re-compress it and throw it on the phone. Would that affect anything?
change ur cable... try different machine...
Same problem
I've encountered the same problem! I flashed darkside on my rooted AT&T Atrix, (unlocked bootlader, rooted). My friend borrowed my phone and saw the AT&T system update and installed it. the phone reboots and I couldn't move past that, then i got the little green android dude with the /!\ sign behind him. Tried factory resetting, restoring from backup, and even flashing over Gingerbread, but nothing worked! If you have found a fix, an answer would really be appreciated!
dcben09 said:
I've encountered the same problem! I flashed darkside on my rooted AT&T Atrix, (unlocked bootlader, rooted). My friend borrowed my phone and saw the AT&T system update and installed it. the phone reboots and I couldn't move past that, then i got the little green android dude with the /!\ sign behind him. Tried factory resetting, restoring from backup, and even flashing over Gingerbread, but nothing worked! If you have found a fix, an answer would really be appreciated!
Click to expand...
Click to collapse
Not the same problem! You tried to OTA on an unlocked bootloader.
CaelanT said:
Not the same problem! You tried to OTA on an unlocked bootloader.
Click to expand...
Click to collapse
Would you happen to know how I might go about fixing it?
Gfrt94yn said:
Oh, missed one detail but I don't think it matters, I'm using a mac and when I download a file it auto unzipps, then I just re-compress it and throw it on the phone. Would that affect anything?
Click to expand...
Click to collapse
That's probably your problem right there. Use a Windows machine to download to, put the zip file on your phone from Windows, do a FULL fastboot wipe, and try flashing the ROM. (Or download right to your phone).
Sorry, I don't use a mac, so can't help there. I can tell you that just zipping files without the correct compression settings will cause the flash to fail.
e.g. If using 7-Zip you need to set Archive format to "zip" and Compression level to "store" when creating flashable zip files or they won't work.
In any event, do a FULL fastboot wipe before flashing:
reboot to recovery
wipe dalvik
wipe cache
reboot to fastboot
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall
fastboot reboot (to recovery)
flash ROM
There are a couple of scripts in the forums which are almost completely automated to do this.
Actually I figured this out forever ago (moved on to new phone), but I'll still help. Anyway download the file DIRECTLY to your phone, no computers!! Then place it on root of sd card (for convenience, you don't have to) and flash. Problem solved! if that doesn't work, the file is most likely corrupt or the way your phone downloaded it is outta wack. Hope this helped
Sent from my SAMSUNG-SGH-I727 using XDA App
Gfrt94yn said:
Actually I figured this out forever ago (moved on to new phone), but I'll still help. Anyway download the file DIRECTLY to your phone, no computers!! Then place it on root of sd card (for convenience, you don't have to) and flash. Problem solved! if that doesn't work, the file is most likely corrupt or the way your phone downloaded it is outta wack. Hope this helped
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Please see my post right before your post. Your problem was downloading to a MAC and the files being unzipped. Then when you zipped them back up it was not done correctly. Computers are not the problem!
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
bump. Please, need help.
ClipTy said:
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
Click to expand...
Click to collapse
if you dont have cwm installed, i assume that you flashed that rom while in bootstrap recovery because you didnt state that the phones bootloader was unlocked.That particular rom is an unlocked only rom, which is why you're stuck in that loop. If I'm right and you flashed that rom via bootstrap, you should be able to get back into it by powering down the phone, holding power and volume down, then using the volume down key to cycle through the options until you hit 'android recovery', then press volume up to boot into it.
At that point, go to mounts and storage, mount usb storage while phone is plugged into your pc, and place this rom:
http://forum.xda-developers.com/showthread.php?t=1648297
On your sd card. After this, go back into mounts and storage and wipe data, system, and cache. Flash the rom you just placed onto your sd card and reboot.
Again, this is all asuming you installed bootstrap recovery, if I'm wrong let me know and ill try to help you further.
I forgot to add, you're also going to need to download a stock blur kernel and place that on your sd card aswell, flashing it after you flash the rom. I can't remember where to find the stock blur kernel but give me a second and ill try to find it for ya.
I don't find that very professional. I think the best you can do is tell me which section it belongs in. At least Acvice offered help...
Thanks you so much! I knew I would have to flash the stock stuff, but I just couldn't find it! Yes, I used bootstrap as I thought it was the only means of getting into cwm. I wont be screwing around after this. Only problem is, the phone is dead! I need to charge it again lol. Thanks for helping. Ill let you know the outcome later.
Acvice said:
*snip*
Click to expand...
Click to collapse
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
ClipTy said:
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
Click to expand...
Click to collapse
Meh, you just flashed something you shouldnt have is all. It honestly happens to all of us. You learn the most by screwing up your phone haha.. Figured i would have you try that method as it would have gotten you a nice fast rom and also fixed your problem. But it looks like youre just unlucky. Were just gonna have to get ya back on stock by flashing an SBF.
1) Download the Windows Moto drivers and install them. Make sure you choose 32bit or 64bit, respectively. (quick google search)
2) Download RSD Lite (quick google search)
3) Download the SBF located here and unzip it.
Use this video to guide you through. Some of his links are outdated which is why i linked the one above. If you are used to ODIN on Samsung devices, you'll probably already know what to do as it's the same kind of program. Good luck. Let me know how it goes.
I've tried RSDLite with an Sbf before, it never succeeded.
Sent from my HTC Sensation using xda app-developers app
Is it possible to flash an sbf with a low battery? If not, how can I charge this thing?
After many lost hours of sleep, I finally give up and come to the community for help. I've seen the problems I'm having posted a lot, but I've not yet found a solution.
To start, all was well with my KitKat 4.4 ROM, except that my SIM would not read. So in my troubleshooting process, I did a full system wipe of everything through TWRP v2.6.3.0 (including internal memory), knowing that my ROM and other necessary files were saved on my SD card. The problem now is that TWRP will not show that I actually have an SD, so I'm stuck with no OS now. I've tried everything I've seen, such as formatting and properly "ejecting" the SD from my computer after doing so. I've tried three different SD cards, two 16gig and one 2 gig. Still won't read.
The only other thing I can think to do is use ADB to push or sideload - my device does not show at all when I try. Same result with fastboot. I'm suspecting that the issue with this is the driver. So far, after searching for hours and hours, the only driver I've found to use with the E970 is the usb_driver downloaded through SDK Manager. When I use this driver, it shows my phone as Google Galaxy Nexus ADB Interface in the Device Manager. But still no luck with ADB or Fastboot.
So I apologize if either of these has been solved one or more times before, but I'm desperate for help. Thanks!
AFAIK , there is a special modded TWRP version for KK Geeb that is patched to read SD Cards.
You'll have to search it or wait till someone who has it posts it here. But I have read about that somewhere , it's just that I am not able to recall. If I find it , I'll post asap.
Rishi. said:
AFAIK , there is a special modded TWRP version for KK Geeb that is patched to read SD Cards.
You'll have to search it or wait till someone who has it posts it here. But I have read about that somewhere , it's just that I am not able to recall. If I find it , I'll post asap.
Click to expand...
Click to collapse
As of right now, my phone has no ROM installed. I'd be willing to bet that it wouldn't read from an SD even before I tried my first ROM, but I don't really know since I never tried. Stupid on my part for not doing so before the wipe. I'll look into the modded TWRP, and hopefully it'll get me somewhere. Thanks for the help!
I assume it shouldn't be hard to push the modded recovery to the phone via ADB. Then you would be able to get the SDcard recognized and flash the rom of your choice.
Or second choice stands as LGNPST , then flash alt./orig. teenybins , which'll give you TWRP 2.5.0.0 or something similar to it. You can flash the new modded TWRP using that as well.
Rishi. said:
I assume it shouldn't be hard to push the modded recovery to the phone via ADB. Then you would be able to get the SDcard recognized and flash the rom of your choice.
Or second choice stands as LGNPST , then flash alt./orig. teenybins , which'll give you TWRP 2.5.0.0 or something similar to it. You can flash the new modded TWRP using that as well.
Click to expand...
Click to collapse
The problem with this is that I can't get ADB to find my device. If that were the case, I'd just push the ROM straight to my internal memory since that's the only one it sees. I've tried and double checked many times to make sure I was doing the ADB process properly. As far as I can tell, I am. Which leads me to think its not the proper driver for my phone. But I can't find any others.
I thought about LGNPST, but I can't get the phone into download mode without an OS. And that's the only way I know to use LGNPST.
You can get the phone to download mode , even without a ROM. The Download mode is initiated , right at phone start up. I think you may be doing it in a wrong way or so , that's why it's not booting up in dload mode. Check the TeenyBins thread , and see if you are doing it right way.
If your phone is booting then LGNPST will work most probably.
Rishi. said:
You can get the phone to download mode , even without a ROM. The Download mode is initiated , right at phone start up. I think you may be doing it in a wrong way or so , that's why it's not booting up in dload mode. Check the TeenyBins thread , and see if you are doing it right way.
If your phone is booting then LGNPST will work most probably.
Click to expand...
Click to collapse
You're absolutely right! I had entered download mode more than a few times before, so I knew how to do it. But I guess in my sleep-deprived and frustrated state, I must have been forgetting something. Just got it into download mode on the first try. I feel like starting fresh with a stock ROM is best, so it's working on that right now.
Thanks coming your way!
SmithZ33 said:
You're absolutely right! I had entered download mode more than a few times before, so I knew how to do it. But I guess in my sleep-deprived and frustrated state, I must have been forgetting something. Just got it into download mode on the first try. I feel like starting fresh with a stock ROM is best, so it's working on that right now.
Thanks coming your way!
Click to expand...
Click to collapse
Take enough sleep , before flashing next time. Last time I remember when I was sleep deprived and did some flashing , I ended up with a partial brick. :lol:
Start fresh with teeny bins. Then FLash the stock rom using recovery. ( Don't LGNPST the stock .tot file.( Use LGNPST just to throw in the correct TWRP recovery and update partitions with TeenyBins ). I would recommend flashing the stock JB .zip file using TWRP recovery . (Created by SnowLeopardJB ). ) Check his thread.
Post if you face any issues. ::highfive:
Rishi. said:
Take enough sleep , before flashing next time. Last time I remember when I was sleep deprived and did some flashing , I ended up with a partial brick. :lol:
Start fresh with teeny bins. Then FLash the stock rom using recovery. ( Don't LGNPST the stock .tot file.( Use LGNPST just to throw in the correct TWRP recovery and update partitions with TeenyBins ). I would recommend flashing the stock JB .zip file using TWRP recovery . (Created by SnowLeopardJB ). ) Check his thread.
Post if you face any issues. ::highfive:
Click to expand...
Click to collapse
Well, I opted to use LGNPST to flash TeenyBins and a TWRP that read my SD. Flashed the KitKat ROM just to try it, and it boots perfectly but I'm back to no SIM. So I'll be moving on to this new issue... haha
So you didnt slept...huh .. lol.
Sent from my LG-E970 using Tapatalk
Rishi. said:
So you didnt slept...huh .. lol.
Sent from my LG-E970 using Tapatalk
Click to expand...
Click to collapse
Haha, no I didn't. Between work and travel, I'm still trying to figure out this sim issue. It won't detect my sim on this ROM, or others it seems. I tried on a LiquidSmooth 4.3.1 ROM just now and it had the same issue. It's almost as if it has the detection set backwards. When I insert the sim, it thinks I've removed it and says ”sim removed." Then when removed, it says ”sim inserted” or something along those lines, and wants to restart. I'm at a loss, and I'm wondering why it could be doing this.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.