check last page for latest situation status.
a bad download, maybe? you try redownloading the files?
Right-click on the file you downloaded and extract it to your desktop or somewhere else you can find it. Then go to the file you extracted, right-click on it and select to run as administrator. Also make sure you're connected to a USB 2.0 port.
Sent from my EVO using XDA Premium 4 mobile app
Yeah, I tried a new download, and still the same outcome.
That didn't work. Some results.
Would it matter that the linux folder has an extra file the Windows file doesnt. (Moonshiner.sh)
redm1st said:
Would it matter that the linux folder has an extra file the Windows file doesnt. (Moonshiner.sh)
Click to expand...
Click to collapse
Are you running it on Linux or Windows?
Did you download the correct format?
I'm running the windows version. And yes its the right version. I dropped the sh. File Into my windows moonshine folder and I got all the way to test 3. But hit a battery to low error. So I'm a charge it and try again. Maybe it may work. Not sure yet.
redm1st said:
I'm running the windows version. And yes its the right version. I dropped the sh. File Into my windows moonshine folder and I got all the way to test 3. But hit a battery to low error. So I'm a charge it and try again. Maybe it may work. Not sure yet.
Click to expand...
Click to collapse
Good luck
Pm if you have any questions
Thanks. Will do. :thumbup:
bigdaddy619 said:
Good luck
Pm if you have any questions
Click to expand...
Click to collapse
Got this far, then it just stopped.
redm1st said:
Got this far, then it just stopped.
Click to expand...
Click to collapse
I think folks are fixing that by rebooting manually.
bigdaddy619 said:
I think folks are fixing that by rebooting manually.
Click to expand...
Click to collapse
Yeah, just rebooted to bootloader. And it says s-off moonshine. So I guess its done..
Thanks for your assistance. :thumbup:
redm1st said:
Yeah, just rebooted to bootloader. And it says s-off moonshine. So I guess its done..
Thanks for your assistance. :thumbup:
Click to expand...
Click to collapse
NP if you see the hands free activation start when you reboot let it do it's thing
A side effect of S-OFF is you can't make or receive calls or texts
bigdaddy619 said:
NP if you see the hands free activation start when you reboot let it do it's thing
A side effect of S-OFF is you can't make or receive calls or texts
Click to expand...
Click to collapse
Yeah it did that during moonshining 2 phase.
CANT s-off for 3.17.651.4
==================== Moonshine S-OFF 0.2.1 (shine) ===========================
Moonshine S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running Moonshine S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running moonshine] ----
(2) Realize that moonshine S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute moonshine S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason touch, unplug, lick or maim your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Reading model id....[PJ7510000]
Test 2: Booting device
Waiting for ADB (41/120)
Device detected.....................
[------------------------------------------------------------]
Test 3: Rebooting into bootloader (again)
Waiting for fastboot (7/120)
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
......................
(Dots go on forever)
redm1st said:
==================== Moonshine S-OFF 0.2.1 (shine) ===========================
Moonshine S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running Moonshine S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running moonshine] ----
(2) Realize that moonshine S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute moonshine S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason touch, unplug, lick or maim your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Reading model id....[PJ7510000]
Test 2: Booting device
Waiting for ADB (41/120)
Device detected.....................
[------------------------------------------------------------]
Test 3: Rebooting into bootloader (again)
Waiting for fastboot (7/120)
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
......................
(Dots go on forever)
Click to expand...
Click to collapse
Use the newest Universal version 0.5.0 and read the instructions it will tell you why you are getting endless .................
BD619 said:
Use the newest Universal version 0.5.0 and read the instructions it will tell you why you are getting endless .................
Click to expand...
Click to collapse
Tried rumrunner 5.0 and got this. (downloaded a fresh download, and still a no go)
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (52/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit
Use a stock rooted rom like Captian_Throwbacks rom
Make sure your Superuser/SuperSU binaries are up to date
Keep the screen awake it may ask you to grant superuser rights
Make sure all your security programs are disabled or deleted and your firewall is turned off
BD619 said:
Use a stock rooted rom like Captian_Throwbacks rom
Make sure your Superuser/SuperSU binaries are up to date
Keep the screen awake it may ask you to grant superuser rights
Make sure all your security programs are disabled or deleted and your firewall is turned off
Click to expand...
Click to collapse
Phone's being stubborn, that's still a no go.
Related
While rooting / SOFFing my One Max, I had to look all around to find all the parts. I wanted to create a guide so other people could get it faster / easier than I could .
This is for the Sprint HTC One Max, not sure how other devices will react. rumrunner is for more than just the Sprint version though.
I TAKE NO CREDIT. IM JUST PUTTING A GUIDE TOGETHER. ALL CREDIT GOES TO PEOPLE WHOM MADE THIS HAPPEN.
Credit: (In no order) Please donate to them! They deserve it.
rumrunner: SOFF program.
scotty1223: Unlocking/removing tampered flag
Flyhalf205: Custom recoveries
carl1961: Unsecure kernel
HTC for an awesome phone
If I forgot anyone, let me know! Everyone that made this happen is awesome!
DISCLAIMER: IT IS NOT MY FAULT IF YOUR PHONE YELLS AT YOU AND RUNS AWAY BECAUSE YOU DID SOMETHING WRONG.
Step One: Unlock your bootloader at htcdev.com. Create an account and follow their instructions. When it asks you for your device put "all other support devices"
Step Two: Make sure your ADB/Fastboot prompts are working. Here's how we check that:
a. Make sure USB debugging is on.
b. Plug in your phone, then open your adb prompt.
c. Issue the command adb devices. If your serial number is shown, adb is working.
d. While still in the adb prompt, issue the command adb reboot bootloader. Your phone will reboot in to your bootloader
e. Now issue the command fastboot devices. If your serial number is shown, fastboot is working.
f. Reboot your device so it's on and fully boot up. It's time to get set up!
Step Three, Getting all the files needed on your craptop. (Computer, just kidding)
a. Download your choice of recovery from flyhalf205's thread (TWRP didn't play nice with my phone, so I used CWM, but your results my vary).
CWM: http://forum.xda-developers.com/showthread.php?t=2498749
TWRP: http://forum.xda-developers.com/showthread.php?t=2498746
b.Then download this superuser.zip. :http://www.mediafire.com/download/v27kh5nkpo3nfum/superuser.zip Place it on your phone somewhere.
c. Then download rumrunner from beaups' thread: http://forum.xda-developers.com/showthread.php?t=2525375
d. Then download carl1961's unsecure kernel : http://www.mediafire.com/download/rrfelsllgomrpix/Sprint_One_Max_1.16.651.4_Unsecure_kernel.zip
Step Four: Lets do this thing!
a. First, we flash a custom recovery. Place the recovery you downloaded from flyhalf205 into the same directory as your adb/fastboot stuff.
b. Plug in your phone, issue the command adb devices just to make sure there is a connection. (can never be too careful now.)
c. If all is good and a serial number is shown, issue the command adb reboot bootloader.
d. You should see a string of words on your phone's bootloader saying "fastboot usb". Issue the command fastboot flash recovery "NAME OF RECOVERYFILEHERE".img. If all goes well. You now have a custom recovery, woop!
BOOT INTO THE RECOVERY AND MAKE A NAND. NOT OPTIONAL.
While in recovery, go ahead and flash the superuser.zip as you would do any other zip.
e. Now open the kernel and extract the boot.img file, place it in the adb/fastboot place.
f. Boot back into the bootloader, and make sure you're in fastboot. Issue the command fastboot flash boot boot.img. If all is well, the unsecure kernel is now on your phone! Now delete the boot.img from that directory (It'll mess with rumrunner).
g. Unzip the rumrunner contents into the adb/fastboot directory and run the soju.exe. Follow the prompt. If all goes well, you should now have an SOFF television in your hand .
HOW-TO Re-enable your fingerprint scanner!
You have to relock (after SOFFing it) the bootloader.
All credit goes to scotty1223.
a. Follow this OP to lock your bootloader. : http://forum.xda-developers.com/showthread.php?t=2540004
b. Follow this OP to remove the tampered flag on your bootloader : http://forum.xda-developers.com/showthread.php?t=2540024
I tested all of this on my own Sprint HTC One Max, and it has all worked with no side effects. After relocking and removing the tampered flag my fingerprint reader was 100% working again.
I'll help if I can. Have fun everyone!
If I can recommend rumrunner first **for Verizon versions** which soff, unlocks bootloader (vice htcdev) , installs unsecure kernel and roots. Htcdev unlock voids warranties for some carriers. Then install recovery of choice.
Lastly I would insert a line to remind everyone to donate to the devs for countless hours put in.
EDITED for versions
Any issues with fingerprint scanner
Thanks PUNK9 for putting this guide together!! Thanks to the devs for their hard work!!
I've had my One Max for 2 weeks and I must root it!!!
I read that unlocking the One Max caused issues with the fingerprint scanner. Is this your experience?
Also, I am a fan of TWRP. What issues did you expereince that caused you to go to CWM.
Thanks,
Gary
Jiggity Janx said:
If I can recommend rumrunner first **for International and Verizon versions** which soff, unlocks bootloader (vice htcdev) , installs insecure kernel and roots. Htcdev unlock voids warranties for some carriers. Then install recovery of choice.
Lastly I would insert a line to remind everyone to donate to the devs for countless hours put in.
Click to expand...
Click to collapse
Do I need unlock the bootloader via HTCDev and flash insecure kernel after S-OFF in order to get root on VZW One Max ?
GaryJohnSr said:
Thanks PUNK9 for putting this guide together!! Thanks to the devs for their hard work!!
I've had my One Max for 2 weeks and I must root it!!!
I read that unlocking the One Max caused issues with the fingerprint scanner. Is this your experience?
Also, I am a fan of TWRP. What issues did you expereince that caused you to go to CWM.
Thanks,
Gary
Click to expand...
Click to collapse
TWRP would go on the "swipe to unlock" screen I wasn't able to swipe it. So I used the classic version of CWM.
Also yes, unlocking the bootloader stops the fingerprint scanner from working. Here is how you get it back working (Which i'll update the OP for)
You have to relock (after SOFFing it) the bootloader.
All credit goes to scotty1223.
Follow this OP to lock your bootloader. : http://forum.xda-developers.com/showthread.php?t=2540004
Follow this OP to remove the tampered flag on your bootloader : http://forum.xda-developers.com/showthread.php?t=2540024
I tested all of this on my own Sprint HTC One Max, and it has all worked with no side effects. After relocking and removing the tampered flag my fingerprint reader was 100% working again.
Have fun!
androitri said:
Do I need unlock the bootloader via HTCDev and flash insecure kernel after S-OFF in order to get root on VZW One Max ?
Click to expand...
Click to collapse
No to htcdev. Rumrunner does all of that for the verizon version EDITED OUT
Jiggity Janx said:
No to htcdev. Rumrunner does all of that for the verizon version and I *believe* it does all that for all versions.
Click to expand...
Click to collapse
anyone use rumrunner and the boot image he attaches with a sprint phone?
---------- Post added at 12:59 PM ---------- Previous post was at 12:18 PM ----------
Jiggity Janx said:
No to htcdev. Rumrunner does all of that for the verizon version and I *believe* it does all that for all versions.
Click to expand...
Click to collapse
"Your device must be HTCDEV unlocked or rooted unless using rumrunner with a device blocked by htcdev (e.g. m7wlv)"
from rumrunner prereq's.
What is considered a device blocked by htcdev?
Having some work issues lately... as in I may not have work in the next week or two. Removing some of the things I have posted recently because I just was not thinking clearly. My apologies.
Jiggity Janx said:
Having some work issues lately... as in I may not have work in the next week or two. Removing some of the things I have posted recently because I just was not thinking clearly. My apologies.
Click to expand...
Click to collapse
Did you unlock on Windows or Linux?
I have linux-64 bit ubuntu and I get a error when running ./soju
error while loading shared libraries: libcurl.so.4
i haveflashed Then download carl1961's unsecure kernel, and i have supersu installed provided by above link. bootloader unlocked by HTCDEV. Same output, constantly.
I receive this for a rumrunner output, what am i doing wrong???
Never getting any popups to give ADB root access, no popups for any escalation.
Starting from usb debugging mode android OS up.
==================== rumrunner S-OFF 0.5.1 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (38/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (32/120)
must ferment longer...
chilling..................
bottles are packed, here we go, shhhhhh....
Waiting for device
rom or root issue? unexpected behaviour detected - flash different rom and try a
gain.
ERROR: run rumrunner again.....
Press ENTER to exit
---------- Post added at 04:08 PM ---------- Previous post was at 03:12 PM ----------
Jiggity Janx said:
No to htcdev. Rumrunner does all of that for the verizon version EDITED OUT
Click to expand...
Click to collapse
DeadPhoenix said:
Did you unlock on Windows or Linux?
I have linux-64 bit ubuntu and I get a error when running ./soju
error while loading shared libraries: libcurl.so.4
Click to expand...
Click to collapse
From rumrunner instructions -
Prerequisites
32-bit Linux (Ubuntu is preferred)
Live CD’s are fine.
Live USB is fine.
Native install is fine.
VM’s are unsupported.
64-bit Linux may work with 32 bit libraries, but is unsupported.
Finger print
Punk9 said:
TWRP would go on the "swipe to unlock" screen I wasn't able to swipe it. So I used the classic version of CWM.
Also yes, unlocking the bootloader stops the fingerprint scanner from working. Here is how you get it back working (Which i'll update the OP for)
You have to relock (after SOFFing it) the bootloader.
All credit goes to scotty1223.
Follow this OP to lock your bootloader. : http://forum.xda-developers.com/showthread.php?t=2540004
Follow this OP to remove the tampered flag on your bootloader : http://forum.xda-developers.com/showthread.php?t=2540024
I tested all of this on my own Sprint HTC One Max, and it has all worked with no side effects. After relocking and removing the tampered flag my fingerprint reader was 100% working again.
Have fun!
Click to expand...
Click to collapse
Finally done and S-OFF. How do I go 'bout fingerprint again???
I was unable to use htcdev.com to unlock the bootloader. I am with Verizon, perhaps thats the issue, not sure. The error I received
Error Code: 160.
Error Reason: MID Not Allowed
Tried using rumrunner and of course that failed due to the fact the bootloader is still locked and there is no unsecure kernel.
Am I missing something?
Punk9 said:
While rooting / SOFFing my One Max, I had to look all around to find all the parts. I wanted to create a guide so other people could get it faster / easier than I could .
This is for the Sprint HTC One Max, not sure how other devices will react. rumrunner is for more than just the Sprint version though.
I TAKE NO CREDIT. IM JUST PUTTING A GUIDE TOGETHER. ALL CREDIT GOES TO PEOPLE WHOM MADE THIS HAPPEN.
Credit: (In no order) Please donate to them! They deserve it.
rumrunner: SOFF program.
scotty1223: Unlocking/removing tampered flag
Flyhalf205: Custom recoveries
carl1961: Unsecure kernel
HTC for an awesome phone
If I forgot anyone, let me know! Everyone that made this happen is awesome!
DISCLAIMER: IT IS NOT MY FAULT IF YOUR PHONE YELLS AT YOU AND RUNS AWAY BECAUSE YOU DID SOMETHING WRONG.
Step One: Unlock your bootloader at htcdev.com. Create an account and follow their instructions. When it asks you for your device put "all other support devices"
Step Two: Make sure your ADB/Fastboot prompts are working. Here's how we check that:
a. Make sure USB debugging is on.
b. Plug in your phone, then open your adb prompt.
c. Issue the command adb devices. If your serial number is shown, adb is working.
d. While still in the adb prompt, issue the command adb reboot bootloader. Your phone will reboot in to your bootloader
e. Now issue the command fastboot devices. If your serial number is shown, fastboot is working.
f. Reboot your device so it's on and fully boot up. It's time to get set up!
Step Three, Getting all the files needed on your craptop. (Computer, just kidding)
a. Download your choice of recovery from flyhalf205's thread (TWRP didn't play nice with my phone, so I used CWM, but your results my vary).
CWM: http://forum.xda-developers.com/showthread.php?t=2498749
TWRP: http://forum.xda-developers.com/showthread.php?t=2498746
b.Then download this superuser.zip. :http://www.mediafire.com/download/v27kh5nkpo3nfum/superuser.zip Place it on your phone somewhere.
c. Then download rumrunner from beaups' thread: http://forum.xda-developers.com/showthread.php?t=2525375
d. Then download carl1961's unsecure kernel : http://www.mediafire.com/download/rrfelsllgomrpix/Sprint_One_Max_1.16.651.4_Unsecure_kernel.zip
Step Four: Lets do this thing!
a. First, we flash a custom recovery. Place the recovery you downloaded from flyhalf205 into the same directory as your adb/fastboot stuff.
b. Plug in your phone, issue the command adb devices just to make sure there is a connection. (can never be too careful now.)
c. If all is good and a serial number is shown, issue the command adb reboot bootloader.
d. You should see a string of words on your phone's bootloader saying "fastboot usb". Issue the command fastboot flash recovery "NAME OF RECOVERYFILEHERE".img. If all goes well. You now have a custom recovery, woop!
BOOT INTO THE RECOVERY AND MAKE A NAND. NOT OPTIONAL.
While in recovery, go ahead and flash the superuser.zip as you would do any other zip.
e. Now open the kernel and extract the boot.img file, place it in the adb/fastboot place.
f. Boot back into the bootloader, and make sure you're in fastboot. Issue the command fastboot flash boot boot.img. If all is well, the unsecure kernel is now on your phone! Now delete the boot.img from that directory (It'll mess with rumrunner).
g. Unzip the rumrunner contents into the adb/fastboot directory and run the soju.exe. Follow the prompt. If all goes well, you should now have an SOFF television in your hand .
HOW-TO Re-enable your fingerprint scanner!
You have to relock (after SOFFing it) the bootloader.
All credit goes to scotty1223.
a. Follow this OP to lock your bootloader. : http://forum.xda-developers.com/showthread.php?t=2540004
b. Follow this OP to remove the tampered flag on your bootloader : http://forum.xda-developers.com/showthread.php?t=2540024
I tested all of this on my own Sprint HTC One Max, and it has all worked with no side effects. After relocking and removing the tampered flag my fingerprint reader was 100% working again.
I'll help if I can. Have fun everyone!
Click to expand...
Click to collapse
If this helps anyone out there. I think unplugging device from USB while rumrunner states it is "Waiting for adb" is probably a good idea. Then plug it back in once the device is fully booted and off the security screen.
This was found on a post somewhere on these forums. Guess its worth a try, i will let everyone know the results!
Everyone having issues with rumrunner should make sure they have plugged in their phone into their computer with AND without adb debugging enabled AND in fastboot to make sure all drivers are set up properly before rumrunner.
Having said that beaups himself said the device driver error is normal.
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
luv2ride said:
I was unable to use htcdev.com to unlock the bootloader. I am with Verizon, perhaps thats the issue, not sure. The error I received
Error Code: 160.
Error Reason: MID Not Allowed
Tried using rumrunner and of course that failed due to the fact the bootloader is still locked and there is no unsecure kernel.
Am I missing something?
Click to expand...
Click to collapse
Read second post of this thread
Jiggity Janx said:
Everyone having issues with rumrunner should make sure they have plugged in their phone into their computer with AND without adb debugging enabled AND in fastboot to make sure all drivers are set up properly before rumrunner.
Having said that beaups himself said the device driver error is normal.
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
Read second post of this thread
Click to expand...
Click to collapse
I will try that!!!! thanks for the response!!!!
I went back and did some research. Found the correct version of RumRunner & completed the process. I was using the "universal" version.
Jiggity Janx said:
Everyone having issues with rumrunner should make sure they have plugged in their phone into their computer with AND without adb debugging enabled AND in fastboot to make sure all drivers are set up properly before rumrunner.
Having said that beaups himself said the device driver error is normal.
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
Read second post of this thread
Click to expand...
Click to collapse
Finished flashing the unsecure kernel and locked the bootloader. Now I'm unable to turn on wifi, I slide the tab and it grays out without turning on. Anyone have an idea on this one?
luv2ride said:
Finished flashing the unsecure kernel and locked the bootloader. Now I'm unable to turn on wifi, I slide the tab and it grays out without turning on. Anyone have an idea on this one?
Click to expand...
Click to collapse
As my second post says rumrunner does EVERYHTING for verizon versions. You have now flashed something non verizon to your phone (kernel) so likely it will have prpblems . You are lucky you are not screwed permanently. However you may have to wait until a dev creates a flashable verizon unsecure kernel. Im not sure what direction to tell you to go...
same issue
==================== rumrunner S-OFF 0.5.1 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (47/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (59/120)
must ferment longer...
chilling..................
bottles are packed, here we go, shhhhhh....
Waiting for device
rom or root issue? unexpected behaviour detected - flash different rom and try a
gain.
ERROR: run rumrunner again.....
Press ENTER to exit
when out of developer mode it is not detected by OS which is strange, HTC Sync picks it up when i reinstalled it attempting to get drivers to make it be detected. What is this issue about? simply PC drivers?
---------- Post added at 07:12 PM ---------- Previous post was at 06:49 PM ----------
just tried from linux - same exact error.
any ideas?
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (59/120)
must ferment longer...
chilling..................
bottles are packed, here we go, shhhhhh....
Waiting for device
rom or root issue? unexpected behaviour detected - flash different rom and try a
gain.
ERROR: run rumrunner again.....
---------- Post added at 07:18 PM ---------- Previous post was at 07:12 PM ----------
logikzzz said:
same issue
==================== rumrunner S-OFF 0.5.1 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (47/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (59/120)
must ferment longer...
chilling..................
bottles are packed, here we go, shhhhhh....
Waiting for device
rom or root issue? unexpected behaviour detected - flash different rom and try a
gain.
ERROR: run rumrunner again.....
Press ENTER to exit
when out of developer mode it is not detected by OS which is strange, HTC Sync picks it up when i reinstalled it attempting to get drivers to make it be detected. What is this issue about? simply PC drivers?
---------- Post added at 07:12 PM ---------- Previous post was at 06:49 PM ----------
just tried from linux - same exact error.
any ideas?
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (59/120)
must ferment longer...
chilling..................
bottles are packed, here we go, shhhhhh....
Waiting for device
rom or root issue? unexpected behaviour detected - flash different rom and try a
gain.
ERROR: run rumrunner again.....
Click to expand...
Click to collapse
omg, ive been running wrong one. should be using universal... lol this will work now i bet
---------- Post added at 07:53 PM ---------- Previous post was at 07:18 PM ----------
s-off wow i feel dumb
DeadPhoenix said:
Did you unlock on Windows or Linux?
I have linux-64 bit ubuntu and I get a error when running ./soju
error while loading shared libraries: libcurl.so.4
Click to expand...
Click to collapse
install 32-bit curl libs and ur all set!
is released for 3.06.605.4
visit rumrunner.us and be sure to use device specific download for dlx (not the universal version).
to summarize options for dlx:
software version 1.xx - use facepalm
software version 2.xx - use moonshine (2.06 version of moonshine DOES work with 2.07 devices)
software version 3.xx - use rumrunner
how many times can we pwn the same device? time will tell.
thank you sir!
Sent from my HTC X920e using XDA Premium 4 mobile app
Wow Beaups, that was quick!!
ocman40 said:
Wow Beaups, that was quick!!
Click to expand...
Click to collapse
Had it done last night but was too lazy to update the site
beaups said:
Had it done last night but was too lazy to update the site
Click to expand...
Click to collapse
GLad to see this happening, Only problem is Im still running Tranquil sense 5 Rom and have not found another sense 5 Rom that I like enough to switch to!!
Maybe all this new stuff coming will give them something to work on and release. I just really love the theme and dont think I can settle for less.
Honestly still Feel the DNA is Verizons best phone.
No one has tried this yet, especially those on the latest update?
I'll be trying it tonight after I get home.
orangechoochoo said:
No one has tried this yet, especially those on the latest update?
Click to expand...
Click to collapse
I tried it. But really it shouldn't be needed yet. Doubt any phones are showing up with this new software version out of the box just yet....
Good lord your the man.
I tried it too. Worked Perfectly!!
Worked flawlessly for me. Thanks for all you do.
snellc001 said:
Worked flawlessly for me. Thanks for all you do.
Click to expand...
Click to collapse
One more flawless operation thank you!
Where is the download link? Checked the site but I only see previous versions.
Sent from my HTC6435LVW using Tapatalk
ocman40 said:
GLad to see this happening, Only problem is Im still running Tranquil sense 5 Rom and have not found another sense 5 Rom that I like enough to switch to!!
Maybe all this new stuff coming will give them something to work on and release. I just really love the theme and dont think I can settle for less.
Honestly still Feel the DNA is Verizons best phone.
Click to expand...
Click to collapse
Viper sense 5 is the tits imho
Sent from my dlx using XDA Premium 4 mobile app
Let me break the chain...
I cant get this to work on the latest firmware. Everything works until...
==================== rumrunner S-OFF 0.5.6 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (8/120)
Waiting
Test 2: Booting device
Waiting for ADB (29/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (8/120)
Waiting for ADB (29/120)
must ferment longer...
chilling..................
bottles are packed, here we go, shhhhhh....
Waiting for device
heh, just a shot glass for this one....
rom or root issue? unexpected behaviour detected - flash different rom and try a
gain.
ERROR: run rumrunner again.....
I am unlocked. I just wanted SOff.
If this is like Moonshine, turn off anti virus software
Fatal error
Keep getting FATAL ERROR on hboot 1.54.0000. I'm locked and s-on but rumrunner.us states that it works on HTCDEV blocked devices for unlocking. Be careful performing a full update. I've tried the universal and DNA specific with both giving a fatal error.
Update
rftechguy said:
Keep getting FATAL ERROR on hboot 1.54.0000. I'm locked and s-on but rumrunner.us states that it works on HTCDEV blocked devices for unlocking. Be careful performing a full update. I've tried the universal and DNA specific with both giving a fatal error.
Click to expand...
Click to collapse
Works on Unbuntu Live USB. Thanks!!
beaups said:
is released for 3.06.605.4
visit rumrunner.us and be sure to use device specific download for dlx (not the universal version).
to summarize options for dlx:
software version 1.xx - use facepalm
software version 2.xx - use moonshine (2.06 version of moonshine DOES work with 2.07 devices)
software version 3.xx - use rumrunner
how many times can we pwn the same device? time will tell.
Click to expand...
Click to collapse
i bet this is a big sucker punch toward verizon
verizon exec: "finally we got sense 5 to the DNA, and we broke moonshine. maybe now i can rest easy."
messenger: "uh sir they've already exploited it."
verizon exec: "NOOOOOOOOOOOOOO"
I'll try this when I get home! Looking forward to it!!! Seems like people are not having any issues!
Sent from my DNA using xda app-developers app
Stock 3.06.605.4 trying to use RumRunner and it fails every time. Anyone have any ideas?
I have ran as administrator every time
Installed the drivers using DNA toolkit
Checked ADB and Fastboot
Cleanboot my machine so nothing else is running.
Keep getting "FATAL: Download updated package at www . rumrunner . us"
==================== rumrunner S-OFF 0.5.6 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (6/120)
Waiting
Test 2: Booting device
Waiting for ADB (35/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (11/120)
FATAL: Download updated package at www . rumrunner . us
Press ENTER to exit
iofractal said:
Stock 3.06.605.4 trying to use RumRunner and it fails every time. Anyone have any ideas?
I have ran as administrator every time
Installed the drivers using DNA toolkit
Checked ADB and Fastboot
Cleanboot my machine so nothing else is running.
Keep getting "FATAL: Download updated package at www . rumrunner . us"
==================== rumrunner S-OFF 0.5.6 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (6/120)
Waiting
Test 2: Booting device
Waiting for ADB (35/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (11/120)
FATAL: Download updated package at www . rumrunner . us
Press ENTER to exit
Click to expand...
Click to collapse
Help
Maybe you downloaded the wrong thing.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
thayl0 said:
Maybe you downloaded the wrong thing.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The one I downloaded was supposed to be correct there are only two options for DNA Linux or Windows on the rumrunner .us site
I'm going to need information. Power phone off. Hold vol down power and does you phone say locked with s on?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
thayl0 said:
I'm going to need information. Power phone off. Hold vol down power and does you phone say locked with s on?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes it does but I thought since this is a htcdev blocked phone that it shouldn't matter and that you can just use this utility. It says that in the instructions. Unless I am wrong and that you can unlock the droid DNA on htcdev. Thanks!
iofractal said:
Yes it does but I thought since this is a htcdev blocked phone that it shouldn't matter and that you can just use this utility. It says that in the instructions. Unless I am wrong and that you can unlock the droid DNA on htcdev. Thanks!
Click to expand...
Click to collapse
I think they blocked it on the newer models. That use to be a way to unlock it. Now you use moonshine or rumrunner.
thayl0 said:
I think they blocked it on the newer models. That use to be a way to unlock it. Now you use moonshine or rumrunner.
Click to expand...
Click to collapse
So how do I figure this out? I am running rumrunner that is for my device and still failing. I wish there were logs I could read of what its doing when it fails.
iofractal said:
So how do I figure this out? I am running rumrunner that is for my device and still failing. I wish there were logs I could read of what its doing when it fails.
Click to expand...
Click to collapse
I would advise you try an message beanup and he could tell you.
thayl0 said:
I would advise you try an message beanup and he could tell you.
Click to expand...
Click to collapse
Tried to message the guy you told me and no response..... Guess I am just stuck with no root for now..... bummer
iofractal said:
Tried to message the guy you told me and no response..... Guess I am just stuck with no root for now..... bummer
Click to expand...
Click to collapse
Post in the thread.
thayl0 said:
Post in the thread.
Click to expand...
Click to collapse
Huh? What thread?
iofractal said:
Huh? What thread?
Click to expand...
Click to collapse
I Think I figured it out
iofractal said:
I Think I figured it out
Click to expand...
Click to collapse
Good
Sent from my HTC6435LVW using XDA Premium 4 mobile app
iofractal said:
I Think I figured it out
Click to expand...
Click to collapse
Stupid limit on posting to developer threads, this will put me over 10 post
thayl0 said:
Post in the thread.
Click to expand...
Click to collapse
Okay, so I am lost I cant find the thread, I thought I found it but it was how to reverse to fully stock.
iofractal said:
Okay, so I am lost I cant find the thread, I thought I found it but it was how to reverse to fully stock.
Click to expand...
Click to collapse
Post in Rumrunner thread http://forum.xda-developers.com/showthread.php?t=2559232
Deleted
thayl0 said:
Good
So I got it figured out, after talking with beanup on IRC. He said Network/Firewall/Antivirus were the cause in every issue with the process. So I took my laptop to a different network and bam it worked. Kinda frustrating because from what I could tell in the process monitor there was no issue but guess I should have also ran a wireshark. Anyways rumrunner is awesome, even better to have it unlock the device without factory reset like if you unlock with HTCdev.
Click to expand...
Click to collapse
OK I've googled and and searched on here and I cant find a straight yes or no answer. I'm thinking about getting an AT&T HTC One and I want to convert it to a google edition. Can I S-OFF the new 1.56 hboot that comes iwth the 4.4.2 update? And if so, can someone provide me instructions or a link. Thanks
ZSwagger1988 said:
OK I've googled and and searched on here and I cant find a straight yes or no answer. I'm thinking about getting an AT&T HTC One and I want to convert it to a google edition. Can I S-OFF the new 1.56 hboot that comes iwth the 4.4.2 update? And if so, can someone provide me instructions or a link. Thanks
Click to expand...
Click to collapse
rumrunner or firewater
why do you think your phone will come with the new software ? most don't
clsA said:
rumrunner or firewater
why do you think your phone will come with the new software ? most don't
Click to expand...
Click to collapse
Im trading for it and its already been upgraded. Thanks for the answer.
Both rumrunner and firewater should be able to do HBOOT 1.56. I didn't have success with rumrunner but it might of just been my computer. However I was able to get firewater to work with HBOOT 1.56 fine. It did take several attempts though. Don't be discouraged if it doesn't work. Restart the phone then try again. You only have to load it to the phone once. Repeat attempts just involve opening adb shell again then running firewater as root.
P.S. - An added note. For me when I got finished with firewater it seemed to have removed tampered flag for me.
Ok so I got the boot loader unlocked and I got a custom recovery installed and I rooted it tried to run rumrunner and I get the "pouring" part but it just keeps doing it any ideas I tried firewater but it wouldn't load the file onto the phone
ZSwagger1988 said:
Ok so I got the boot loader unlocked and I got a custom recovery installed and I rooted it tried to run rumrunner and I get the "pouring" part but it just keeps doing it any ideas I tried firewater but it wouldn't load the file onto the phone
Click to expand...
Click to collapse
flash a rom with insecure kernel like ARHD 36.1 or an older version of insertcoin like 5.0.4
I GOT IT!!!!!!!!!! I had a Screen Lock on the phone when it says to shut it off lol now I'm running HTC One GPE
clsA said:
flash a rom with insecure kernel like ARHD 36.1 or an older version of insertcoin like 5.0.4
Click to expand...
Click to collapse
im on arhd 36.1 and cant get firewater or rumrunner to work on it ...when ask for su it doesnt give me prompt just a # .... when connected with usb debugging enabled it doesnt show it on phone as to be in usb debugging mode just mtp node is enabled.. fastboot is off and lock screen set to none...
Firewater:
C:\Users\ace\Desktop\htc 1 toolkit>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\ace\Desktop\htc 1 toolkit>adb wait-for-device push firewater /data/loca
l/tmp
2777 KB/s (4519496 bytes in 1.589s)
C:\Users\ace\Desktop\htc 1 toolkit>adb shell
[email protected]:/ # su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
==================== firewater S-OFF 8.0.5.15 ===========================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs. posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
yes
yes
Type 'Yes' or 'No'
(Yes/No)
Yes
Yes
********** whelp, this sucks, firewater can not work on your device **********
********** no amount of reflashing, retrying, or ruuing will fix... **********
********** DO NOT COME TO IRC ASKING FOR UPDATES OR ETAS!!!!!! **********
********** if we are able to fix this issue, it will be announced **********
********** bye bye.....sorry it didn't work out. **********
..............................................................................................................
..............................................................................................................
rumrunner:
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (22/120)
Waiting
Test 2: Booting device
Waiting for ADB (16/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (28/120)
must ferment longer...
chilling..................
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)..........................
pouring (2)...........................
pouring (3)............................
pouring (4)............................
pouring (5)..............................
pouring (6)............................
pouring (7)............................
pouring (8).............................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
bigfdaddy2 said:
im on arhd 36.1 and cant get firewater or rumrunner to work on it ...when ask for su it doesnt give me prompt just a # .... when connected with usb debugging enabled it doesnt show it on phone as to be in usb debugging mode just mtp node is enabled.. fastboot is off and lock screen set to none...
Click to expand...
Click to collapse
yeah it's unfortunate they don't work for everyone... some phones just won't go s-off. just enjoy flashing roms it's not the end of the world not being s-off
Yea but I am stuck to sense roms everything else slows and glitches if it not sense based
Sent from my HTC One using Tapatalk
delete me
Hi all. i tryed S-off from my htc desire x. Bootloader unlocked custom rom and kernel. When i try rumrunner FATAL: Download updated package at rumrunner and firewather same not working. Hboot.1.25.0002 Radio 1.15.40.04. I tried to use universal rumrunner not working. I now have seven vibrations. Any idea?
turboflashing said:
Hi all. i tryed S-off from my htc desire x. Bootloader unlocked custom rom and kernel. When i try rumrunner FATAL: Download updated package at rumrunner and firewather same not working. Hboot.1.25.0002 Radio 1.15.40.04. I tried to use universal rumrunner not working. I now have seven vibrations. Any idea?
Click to expand...
Click to collapse
You need to run the device specific latest package from rumrunner.us.
dansou901 said:
You need to run the device specific latest package from rumrunner.us.
Click to expand...
Click to collapse
Where i can download?
Here: http://rumrunner.us/downloads-2/
Just go down the site and pick the HTC Desire X one.
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit
HTC Desire X (proto/protou) Windows MANY rumrunner_proto_0.7.1.zip - 21.4 MB
and
Windows 0.5.0 rumrunner_HTC_0.5.0.zip - 20.2 MB
Same error.....
ANY IDEAS?
.1. No Antyvirus and firewall
2. New windows 7 pro 32 updated
3. my rom JB Desire X STOCK ROM 2.20.401.6 Jelly Bean Sense 4+
i'm getting the same error:
Code:
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (14/120)
Waiting
Test 2: Booting device
Waiting for ADB (82/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (14/120)
FATAL: Download updated package at www.rumrunner.us
i already s-offed my phone once (and s-on'd it again) some time ago, i followed the instructions on romrunner.us, no idea where this error comes from.
edit: same with deodexed stock rom 2.20.401.6
tried different kernels, too. still no luck.
probably romrunner has disabled servers. I flash new stock boot Jb and
the problem is the same
and when they turn on? and what to do now? need to ask the developer to include the server.
realCyphox said:
i'm getting the same error:
Code:
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (14/120)
Waiting
Test 2: Booting device
Waiting for ADB (82/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (14/120)
FATAL: Download updated package at www.rumrunner.us
i already s-offed my phone once (and s-on'd it again) some time ago, i followed the instructions on romrunner.us, no idea where this error comes from.
edit: same with deodexed stock rom 2.20.401.6
tried different kernels, too. still no luck.
Click to expand...
Click to collapse
I have same problem, different roms/kernels etc. Mine gets stuck here.
==================== rumrunner S-OFF 0.7.1 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner]
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this wo
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (6/120)
Waiting
Test 2: Booting device
Waiting for ADB (48/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please.............................................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (6/120)
FATAL: Download updated package at www.rumrunner.us
Press ENTER to exit
I have the same problem, please help
Help?
Anyone? Any sugestions? I need to unlock my desire x...
Disable your AV and firewall, reboot and try run it with administrator permission.
IulianV4 said:
Anyone? Any sugestions? I need to unlock my desire x...
Click to expand...
Click to collapse
I do not use antivirus. closed all running apps, restarted windows, etc, tried everything. maybe is something about the phone? about rumrunner?
It's not rumrunner, it's either something with firewall, network or internet security. What ROM, kernel and hboot are you on ?
nightwalkerkg said:
It's not rumrunner, it's either something with firewall, network or internet security. What ROM, kernel and hboot are you on ?
Click to expand...
Click to collapse
how can you be so sure about that? i already s-offed my phone once (on win7, same system) and now on win8 it doesnt work anymore.
no av, firewall disabled, network configuration the very same as before.
i tried it on different roms and kernel, even on stock rom, always the same error.
tried it on a winxp netbook, too. same.
and as there are more and more people experiencing this "fatal error: download update blabla yada"-error, i very tend to believe that the problems is on rumrunners side somehow.
realCyphox said:
how can you be so sure about that? i already s-offed my phone once (on win7, same system) and now on win8 it doesnt work anymore.
no av, firewall disabled, network configuration the very same as before.
i tried it on different roms and kernel, even on stock rom, always the same error.
tried it on a winxp netbook, too. same.
and as there are more and more people experiencing this "fatal error: download update blabla yada"-error, i very tend to believe that the problems is on rumrunners side somehow.
Click to expand...
Click to collapse
Because the other devices had a same problem and got fixed by av/firewall disable. I recommend you to download Ubuntu, make a live cd and try with it.
Does ADB USB drivers work Windows 8? I though it didn't worked
Do as nightwalker said, and if you're not on stock Rom and kernel, go back to it.
albru123 said:
Does ADB USB drivers work Windows 8? I though it didn't worked
Do as nightwalker said, and if you're not on stock Rom and kernel, go back to it.
Click to expand...
Click to collapse
tried different roms, different kernels. went back to stock rom odexed, deodexed, all have the same result, same ****ing error...
albru123 said:
Does ADB USB drivers work Windows 8? I though it didn't worked
Click to expand...
Click to collapse
well, you are wrong!!
albru123 said:
Do as nightwalker said, and if you're not on stock Rom and kernel, go back to it.
Click to expand...
Click to collapse
tried with ubuntu 32bit, guess what happened?
maybe i should change my isp or move to a different country or planet to get rumrunner working again
or maybe some people should finally consider the possibility that some server-sided response from rummrunner doesnt work.
realCyphox said:
well, you are wrong!!
tried with ubuntu 32bit, guess what happened?
maybe i should change my isp or move to a different country or planet to get rumrunner working again
or maybe some people should finally consider the possibility that some server-sided response from rummrunner doesnt work.
Click to expand...
Click to collapse
Yeah,i heard Venus has a nice 1Gbps plan,and it's cheap. ( HA! In your face Google! )
If that is the case then you do this :
1. Go to webchat.freenode.net. ( Or you can use your own IRC client)
2. Join the #rumrunners channel.
3. Tell Beaups that he is d*** for not fixing it. ( He is not really a D, he is a great guy. xP )
4. Profit! ( Or get a ban from the channel. )