Just checked for OTA pushed updates for my 920 GB Yellow unbranded and its downloading now as i type.. well somthing is comming down..
Will keep you posted as to what i get.
Fone prod code 059R072
If i am a bit later with the message and i am last to get it then can a mod just delete the thread.
Cheers
chris
Data sense is in.. Call + SMS filter is in ( no idea if it works tho)
OS ver 8.0.10328.78
still looking for other things but all looks good so far.
Related
Did an OTA software update before and received 1.2.A.1.174 which came in around 16MB.
Haven't noticed any changes yet but will post again if I find anything. Apparently the WiFi issues have been resolved but I never had an issue with WiFi so can't comment on that.
no update here yet, custom NL.
Which build are you on?
Nothing here too
dcuk7 said:
Did an OTA software update before and received 1.2.A.1.174 which came in around 16MB.
Haven't noticed any changes yet but will post again if I find anything. Apparently the WiFi issues have been resolved but I never had an issue with WiFi so can't comment on that.
Click to expand...
Click to collapse
I can see and download, but i can't install... :-(
My phone is rooted.
no update available for me either.
rootet 1.1.A.0.8 / no branding / provider "blau.de"
I've got the update. The UI little bit change (color of text on buttons). Some new app appear (I think) Geotags, new TrackID, some bugfix on handsfree control and some widgets. I think also that response on some action is now smoother but cannot tell on 100%.
new update
Only the one change that I found on my phone - it is not possible to use a default setting in compass application menu - I must use a alternate sensor type. If I use "defaults" - the compass does not appear on screen...
no update available for me either (mini pro qwertz)
rootet 1.1.A.0.8, no branding, Vodafone Italy
Can't be stuffed unrooting, updating, re-rooting and then uninstalling all the crapware again. I'll just wait for 2.1 to come out.
oversim said:
no update available for me either (mini pro qwertz)
rootet 1.1.A.0.8, no branding, Vodafone Italy
Click to expand...
Click to collapse
I can confirm no update in Italy for now...i onestly hoper ti solve my problem with the phone rebooting during some incoming calls with the new update
update 1.2.A.1.174
I found a new information on this update on our Czech language forum - there a new widgets on phone - "last call - or intelligent searching" application - find last call through 3 days with small numeric keyboard; next is a great widget to change the status of phone - to Wifi enable/disable - Airplane mode enable/disable - bluetooth enable/disable - all in one clicks.
just got the new update, has the new widgets, as well as some minor changes, such as trackID, other than that, feels a bit faster?
running on the generic UK firmware.
I got a notice of a new update, but I accidently accepted it before turning on data, so I got an error-message about my network connection and the update notification was lost. Is there anyway to get it "back"?
I have a rooted debranded voda pro and this update has just come through - will I lose root installing this or should everything contiue to run as it was?
snenz said:
I got a notice of a new update, but I accidently accepted it before turning on data, so I got an error-message about my network connection and the update notification was lost. Is there anyway to get it "back"?
Click to expand...
Click to collapse
Go to Settings > About phone > Software update > Update now
Is there a way to download the firmware first and then update the phone offline ?
joshuawittstock said:
just got the new update, has the new widgets, as well as some minor changes, such as trackID, other than that, feels a bit faster?
running on the generic UK firmware.
Click to expand...
Click to collapse
Hi josuawittstock
I am on vodacom but i have not received the update as yet. I bought the phone (mini rooted) in the UK last month. Are you with vodacom as well?
Downloading update now on the missus Mini. (Orange - UK)
.
No Update yet for my MiniPro - (02 Uk)
I have generic UK firmware and yet mine says up-to-date :/
generic uk firmware and rooted, and i have the update.
I've tried so many times, but I still can't get it update to 2.1.Why is that? Mine is x10i.
FYI i just got the update notification for 2.1 by SE downloading it now
o2 uk
We would need to know the brand and country of your current firmware to be able to help because x10i doesn't help.
from the swipe to unlock screen.. press
menu back back menu
back menu menu back
service menu - model info (I think)..
kingkongking said:
I've tried so many times, but I still can't get it update to 2.1.Why is that? Mine is x10i.
Click to expand...
Click to collapse
My first guess would be that you can't read very well...
my original network was tmobile.but its unlocked now.
That wasn't what I asked.
im_iceman said:
We would need to know the brand and country of your current firmware to be able to help because x10i doesn't help.
from the swipe to unlock screen.. press
menu back back menu
back menu menu back
service menu - model info (I think)..
Click to expand...
Click to collapse
I know we may not get the update until 2012 but is there at least a date as to when we'll get the update here in the US? this is driving me crazy.
I'm kind of afraid of debranding my phone because I don't want to brick it. If I just have a general release date that will be enough to hold me over...but I don't even know that!
Model:
X10a
Country:
USA
Brand :
ATT
It's actually surprisingly easy to replace the firmware on your phone.. and then to swap it back if you need or want to.. have a look in the dev section and work your way upto it.. took me a while to build up the courage (mainly helped along by my impatience for the 2.1 upgrade)... but once i'd realised how easy it was.. there was no looking back.. i've since re-rooted my 2.1 several times, installed JIT to improve performance, removed a load of system apps that I don't use..
and if I bugger it up in the process, I can just repair it using SEUS and start from a fresh 2.1 build (not that I've needed to do that yet!).
Hi folks
I used this app to unlock my phone (SGS2) from Three UK to Orange UK - Worked perfectly...! (Rated 5 stars in the market by the way)
Then (stupidly?!) I upgraded the firmware using the Samsung OTA update this morning to WKF4 (which went well) but now I get "No Service" when using my Orange SIM. I can put in the original Three SIM card and it works fine (eg I get service and can make calls), when I insert my orange the problem returns.
I do not get a box asking for my unlock code a second time when inserting the Orange SIM.
Does any kind individual have any pointers or ideas?
Some extra information: I notice that Im prompted to download a further update (which I havent done yet). Im running on Android 2.3.3 (Yes Im rooted and have SU permissions according to Titanium backup)
*#SIMLOCK# shows everything is OFF
Any pointers welcome
Thanks
Dont know why you did not install a non branded firmware since you seem to be using UK 3 and Orange sim cards.
Search in this forum there a a few unlock tips and apps..
Great, thanks. Ill take a look.
Im new to the SGS2 (HTC Desire before) - I had planned to install a generic firmware - Perhaps that should be the next thing I try to see if it makes any difference.
I debranded my SGS3 to general UK firmware (XLE8 BTU) and I changed my CSC to BTU and after 2 OTA updates I have a strange issue: I cannot update anymore through OTA because a special message appears.
Now, I am updating from my computer through Kies. Check the image.
Off-topic: The message looks like they translated it from Korean to English with Google Translate.....
Further translation
WAIT THE SERVERS ARE OVERLOADED.
jje
I was also receiving this message when trying to update from OTA, it seems to appear when the Samsung servers are busy, not sure but I assume that is the reason..
the server might be in maintenance or overload, you can try again later :good:
I bought a s9+ from swappa around February. I bought my mom one from the same supplier a week ago. At first I was concerned that her's had ATT logo until I realized it would change once a tmobile sim was put in. Her's is now SW ver Tmb/Tmb/Tmb. Then I noticed she is at Android 10.0 UI ver 2.0. I am stuck at Android 9 UI ver 1.0
So It seems I was worried about the wrong phone. It is MY phone that can't get updates. My baseband is:
G965USQU7CSK6 which I believe is an ATT baseband. my SW ver is Tmb/Tmb/Att
I tried connecting to smart switch and it says I am up to date. I tried putting in an at&t sim card (that no longer is in service) and smart switch doesn't complain about anything but it still says it is up to date. Doing OTA while using At&t sim card also says I am up to date. I am CLEARLY not up to date. My last update says Nov.1, 2019.
I have used Odin before...mostly for rooting phone. I haven't rooted since the s5 ( where I could take the battery out ). Little paranoid to use Odin considering I can't take the battery out, but with good instructions I will proceed.
Any help on how to update and especially update on tmobile network would be extremely appreciated.
btw I'm in the US and my model is SM-G965U
-Craig
--UPDATE
I have researched a bit and found that it IS possible to change the firmware over to Tmobile using a patched version of Odin.
I downloaded from
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
the 3.13.3_3B_PatcheD.zip
I downloaded G965USQS7CSK3_G965UOYN7CSK3_TMB.zip
from sammobile, which is for Android 9
I would love to be able to use HOME_CSC but that may not work. I could really use some hand holding going through this process.
Is this the correct firmware? Should I be using Android 10 firmware if that is ultimately what I want? HOME_CSC or no? I notice they have the 10 version:
PDA G965USQS7DTB1
CSC G965UOYN7DTB1
as well, which is Android 10 for Tmobile. Also, knox ? will this trip the knox counter thing-a-ma-jig?
Thanks
SOLVED
cw9002 said:
I bought a s9+ from swappa around February. I bought my mom one from the same supplier a week ago. At first I was concerned that her's had ATT logo until I realized it would change once a tmobile sim was put in. Her's is now SW ver Tmb/Tmb/Tmb. Then I noticed she is at Android 10.0 UI ver 2.0. I am stuck at Android 9 UI ver 1.0
So It seems I was worried about the wrong phone. It is MY phone that can't get updates. My baseband is:
G965USQU7CSK6 which I believe is an ATT baseband. my SW ver is Tmb/Tmb/Att
I tried connecting to smart switch and it says I am up to date. I tried putting in an at&t sim card (that no longer is in service) and smart switch doesn't complain about anything but it still says it is up to date. Doing OTA while using At&t sim card also says I am up to date. I am CLEARLY not up to date. My last update says Nov.1, 2019.
I have used Odin before...mostly for rooting phone. I haven't rooted since the s5 ( where I could take the battery out ). Little paranoid to use Odin considering I can't take the battery out, but with good instructions I will proceed.
Any help on how to update and especially update on tmobile network would be extremely appreciated.
btw I'm in the US and my model is SM-G965U
-Craig
--UPDATE
I have researched a bit and found that it IS possible to change the firmware over to Tmobile using a patched version of Odin.
I downloaded from
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
the 3.13.3_3B_PatcheD.zip
I downloaded G965USQS7CSK3_G965UOYN7CSK3_TMB.zip
from sammobile, which is for Android 9
I would love to be able to use HOME_CSC but that may not work. I could really use some hand holding going through this process.
Is this the correct firmware? Should I be using Android 10 firmware if that is ultimately what I want? HOME_CSC or no? I notice they have the 10 version:
PDA G965USQS7DTB1
CSC G965UOYN7DTB1
as well, which is Android 10 for Tmobile. Also, knox ? will this trip the knox counter thing-a-ma-jig?
Thanks
Click to expand...
Click to collapse
ok, so I bit the bullet and decided to go ahead. I used
odin 3.14.1_3B_PatcheD.zip just to be sure
I made sure my phone was unlocked: yes it changes carriers if I put in different sim. When in Tmobile sim Settings->Connections->Mobile Networks->Network operators , yes it has a search networks button and it eventually comes up with other carriers so....safe to say I had unlocked phone ( but not samsung unlocked ie. SM-G965U not SM-G965U1)
I used the latest android 9 firmware. and I used HOME_CSC ( even though I did a backup with smart switch b4) Everything went smoothly, and I still have my apps and now I can get an ota security patch for it. Will write back once I am up to Android 10. oh, btw I am still at SW ver Tmb/Tmb/Att , but I've got ota updates so I don't care
cw9002 said:
ok, so I bit the bullet and decided to go ahead. I used
odin 3.14.1_3B_PatcheD.zip just to be sure
I made sure my phone was unlocked: yes it changes carriers if I put in different sim. When in Tmobile sim Settings->Connections->Mobile Networks->Network operators , yes it has a search networks button and it eventually comes up with other carriers so....safe to say I had unlocked phone ( but not samsung unlocked ie. SM-G965U not SM-G965U1)
I used the latest android 9 firmware. and I used HOME_CSC ( even though I did a backup with smart switch b4) Everything went smoothly, and I still have my apps and now I can get an ota security patch for it. Will write back once I am up to Android 10. oh, btw I am still at SW ver Tmb/Tmb/Att , but I've got ota updates so I don't care
Click to expand...
Click to collapse
I am now at the same baseband version as my mom. Everything worked perfectly. I suggest you go with the least change possible to get to the point that you are able to do OTA updates. For me this was going to the latest Android 9 that they had at sammobile since I was on Android 9 and going with the Tmobile version. I hear the carrier doesn't even matter these days, but I decided I wanted to make sure it was Tmobile compatible so I chose the Tmobile version from sammobile. Happy trails to you in your endeavors. Hopefully you can learn something from mine.
Hey, I really want to thank you for this! I had the same issue and was exploring similar solutions. After several days of researching alternate plans, I was about to give it up as too risky until I found your post - by googling for hints: "SW ver. TMB/TMB/ATT"! You helped me take the dive, and I'm now happily past having a second-hand S9 (sm-g960u) that wouldn't do an OTA update. After a flawless flash, my first OTA request got me to Android 10, (UI 2). now I have a follow-up update scheduled for the wee hours. (And, yes, I'm still at "TMB/TMB/ATT".)
Perhaps like you, I started by investigating the possibility of flashing the UNLOCKED ("U1") firmware. After learning it was possible with the _patchedD Odin, it still scared me enough that I decided on a more conservative approach and followed your exact advice. I especially appreciated your plan to flash NOT the latest update, but the last Android 9 TMB update. That turned out to correspond to the ATT version on my phone, making TMobile either unable or unwilling to offer an OTA update.
History: This is my third used S9. While all were sold as UNLOCKED, only the first had the "U1" model suffix (SM-g960u1). When the second one booted up as a TMobile phone, I felt tricked - but also lucky that I got the right carrier. That's when I learned about the difference in model numbers. As you noted the U1 firmware is factory unlocked - attached to no carrier. When my third phone booted up with a Verizon greeting I figured I could be facing trouble - even though it accepted my TMB sim card.
The seller explained to me that my phone was part of a batch of ATT phones, all "SIM unlocked" using a Verizon sim card. I think sellers of phones with claims to be unlocked should be required to specify whether FACTORY or SIM unlocked.
Hope this great contribution of yours will continue to help others.