So, I decided to stick with stock and what do I get? A phone that randomly stops working like I flashed a custom rom on it :X
All jokes and the sad situation aside, when plugged in i can get the Download Mode to stay open (else it closes after 3sec when not plugged in), figured I would try and flash the Stock Kernel to try and recover some of my app data but can only get to download mode so cant use recovery!
Can someone throw together an Odin flash-able Stock 4.1.2 Galaxy Note i717 Kernel together for me? Id like to try that before I outright flash over the entire rom through Odin!
Thanks!
Hammerfest said:
So, I decided to stick with stock and what do I get? A phone that randomly stops working like I flashed a custom rom on it :X
All jokes and the sad situation aside, when plugged in i can get the Download Mode to stay open (else it closes after 3sec when not plugged in), figured I would try and flash the Stock Kernel to try and recover some of my app data but can only get to download mode so cant use recovery!
Can someone throw together an Odin flash-able Stock 4.1.2 Galaxy Note i717 Kernel together for me? Id like to try that before I outright flash over the entire rom through Odin!
Thanks!
Click to expand...
Click to collapse
ok, I read that you have seemingly more than ample experience here o XDA, so I want to give you the respect that is due, however you post is a wee bit confusing. maybe that's due to a lack of some other information.
let me ask a few questions.
is this phone new to you?
can you get to about phone info? what does it say?
I don't understand you download mode information..........
if you were trying t flash stock kernel, then your not on stock?
if you are on stock, then you HAVE stock kernel?
what recovery are you supposed to have?
no offense meant, but you HAVE pressed VOL UP & DOWN and POWER until vibe and logo then releasing POWER for download mode right?
again no offense, but sometimes the simplest things right.......
captemo said:
ok, I read that you have seemingly more than ample experience here o XDA, so I want to give you the respect that is due, however you post is a wee bit confusing. maybe that's due to a lack of some other information.
let me ask a few questions.
is this phone new to you?
can you get to about phone info? what does it say?
I don't understand you download mode information..........
if you were trying t flash stock kernel, then your not on stock?
if you are on stock, then you HAVE stock kernel?
what recovery are you supposed to have?
no offense meant, but you HAVE pressed VOL UP & DOWN and POWER until vibe and logo then releasing POWER for download mode right?
again no offense, but sometimes the simplest things right.......
Click to expand...
Click to collapse
None taken been around the block a few times...
As for the phone, its basically in need of replacement by my thoughts, but I wanted to try and salvage some of my app data files:
WITHOUT the power plugged in, the unit does nothing but vibrate when I press the VOL Down, and any other key combos do not make the unit respond either.
When I remove the battery, then hold the VOL Down button... down... then put the battery back in, the unit will start in "Download mode" but even if I leave it on the screen or hit the up arrow to continue, after a few seconds it just shuts off and wont stay on.
However when I remove the battery, then hold the VOL Down, then plug in the adapter, it boots into download mode and doesnt shut off after a few moment's (however it wont start normally when I plug it in, just eternally vibrate).
The unit is an AT&T Variant of the Samsung Galaxy Note, specifically just the SGH-i717
The unit was/is running STOCK ROM+Kernel
I was making the request for the Stock Kernel for an Odin flash because when I had the Stock 4.0.4 I had a very identical situation occur (the difference being back then I could get and stay in download mode without using the power adapter) and used the Stock Odin Kernel from here:
http://forum.xda-developers.com/showthread.php?t=1506330
To get back into the unit and continue on without issue.
So the core of my post remains the same I need an Odin flash-able Stock AT&T 4.1.2 i717 kernel
*Your right, been here a while, I have tried again and again to grasp doing my own builds and all that other stuff when it comes to development and "do it yourself" and while I can fix a computer, build one, troubleshoot one, when it comes to Code... I am SO lost without a cause its not funny, so making the kernel file for myself is like asking me to walk on water when I am perfectly able to swim laps around someone who is ...
Sounds like you more than likely have a bad battery or a stuck power button. Mine had stuck on two separate occasions and just sits there vibrating and can't get it to boot or anything. Since I'm pretty sure you are out of warranty you can take a small screw driver and guitar pick to take it apart and use a little rubbing alcohol to clean the button.
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app
kind of with RQUIETT............
after reading more detailed post, the first thing that came to my head was the stuck power button issue which has plagued many.
the battery, I have seen many have that too.
I am definitely not he brainpan to just whip up a kernel like it were a batch of cookies or something, I am still just curious as to why you keep going on about just the kernel, but to each there own.
good luck and keep us posted
captemo said:
kind of with RQUIETT............
after reading more detailed post, the first thing that came to my head was the stuck power button issue which has plagued many.
the battery, I have seen many have that too.
I am definitely not he brainpan to just whip up a kernel like it were a batch of cookies or something, I am still just curious as to why you keep going on about just the kernel, but to each there own.
good luck and keep us posted
Click to expand...
Click to collapse
if you are still curious then you failed to read my last post... reading not required I guess
Ill check the power button, but it definitely doesn't feel stuck, gives the wonderfully audible click still (been in an otterbox the whole time), I also had the local AT&T store order me a replacement battery, if not Insurance claim it will be.
Random thought, the thing that doesnt add up is that if its a stuck power button, then it would STILL turn off when plugged in to the AC/PC, which it doesnt... but Im willing to give it a try because If fear they will try and replace my wonderful 16:10 screen with a ****ty 16:9 one... (sorry, for all the wow of the GN2, its to NARROW for my use)
Hammerfest said:
if you are still curious then you failed to read my last post... reading not required I guess
Click to expand...
Click to collapse
if anyone reads around here it is me, and I think its ok for me not to understand what needing a kernel alone is going to do for you. you came cross to me as a little harsh at someone who is trying to help and little demanding to expect someone to drop what they are doing just whip up a file for you flash in Odin.
I never claim to know everything here, and again, many times what I have to say (right or wrong) will spark someone else to chime in with a more educated answer.
but hey glad to try and help you anyway
My power button never felt stuck when it was. It did a lot of what you described when it did. Sometimes you can take it out of the case and tap on the back and it will free it up
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app
captemo said:
if anyone reads around here it is me, and I think its ok for me not to understand what needing a kernel alone is going to do for you. you came cross to me as a little harsh at someone who is trying to help and little demanding to expect someone to drop what they are doing just whip up a file for you flash in Odin.
I never claim to know everything here, and again, many times what I have to say (right or wrong) will spark someone else to chime in with a more educated answer.
but hey glad to try and help you anyway
Click to expand...
Click to collapse
Ill go ahead and post again what I posted before (again):
"""The unit is an AT&T Variant of the Samsung Galaxy Note, specifically just the SGH-i717
The unit was/is running STOCK ROM+Kernel
I was making the request for the Stock Kernel for an Odin flash because when I had the Stock 4.0.4 I had a very identical situation occur (the difference being back then I could get and stay in download mode without using the power adapter) and used the Stock Odin Kernel from here:
http://forum.xda-developers.com/show....php?t=1506330
To get back into the unit and continue on without issue."""
I have also made bold and increased the size of the "confusing" subject matter answer for you.
Also pretty sure I never asked anyone to drop what they where doing either.
@rquiett: thanks, I will go ahead and try and disassemble it and see if thats the case, they wont be processing any claims requests until Tuesday anyway, weird stuff as its the first time I have left the Phone Stock since FJ's rom's.(the irony of a phone having an issue while on stock when I normally flash everything with a custom rom does NOT escape me)
your welcome
I blame Samsung then since you are on stock
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app
Related
Please help! i rooted my phone and everything was fine. then i used odin to put on a rom. i followed the instructions which said to choose the re-partition option and place files for the pit, pda and phone sections, here is the rom i was using
http://forum.xda-developers.com/showthread.php?t=1207466
there was a failed message and my phone was locked in download mode. i shut it down by holding the power button and now it is in a hard bricked state. everything is black and nothing is recognised. when i plug in the charger nothing happens same with usb. ive tried all the button presses i could find volume up+home+power, volume down+home+power, volume down+home with no battery and then place battery... etc.
really nothing is working.
if there is anything i can try can you please let me know! also if there is nothing i can do and i have to take it in to my service provider then will they know what i have done?
thank you.
Go post in Q&A thread. Developement is reserved for developement. I'll help you when you will have asked for a move or rewrited in Q&A
Sent from my GT-I9100 using xda premium
You flashed a I9000 ROM on an I9100 device?!
Kiss your phone goodbye unless you jtag it or send it to the service center.
You have flashed a rom for a different phone. The rom you flashed is for Galaxy S not Galaxy S II..
I have read a thread similar like this before but
for what I can remember his phone is permanently bricked. You might want to search
in the Q&A thread. This thread is for Android Development.
donalgodon said:
You flashed a I9000 ROM on an I9100 device?!
Kiss your phone goodbye unless you jtag it or send it to the service center.
Click to expand...
Click to collapse
i don't know how i missed that. could you tell me what jtag is? is it the same as a jig?
thanks.
Yes it is totally bricked. Unless you have chance and want to try something. The USB jig to put i9000 and i9100 phone in download is the same ( Both use 151k oHms). If you try to use a jig on your phone you might be able to put it back on download mode. However, i would doubt that it work. Since you don't have the good Bootloader on your phone, i'm more like 97% sure it wont work. The black screen only is also a good sign of death. Sry to ear that. JTag is not the same thing than the jig btw. JTag is how they put the first information, at factory, on your phone. It can be used to put back the good bootloader on your phone. But if i remember well, only phone compagnie ( On this case Samsung) and a few person have what it take to make a JTag.
katiezoppo said:
Please help! i rooted my phone and everything was fine. then i used odin to put on a rom. i followed the instructions which said to choose the re-partition option and place files for the pit, pda and phone sections, here is the rom i was using
http://forum.xda-developers.com/showthread.php?t=1207466
there was a failed message and my phone was locked in download mode. i shut it down by holding the power button and now it is in a hard bricked state. everything is black and nothing is recognised. when i plug in the charger nothing happens same with usb. ive tried all the button presses i could find volume up+home+power, volume down+home+power, volume down+home with no battery and then place battery... etc.
really nothing is working.
if there is anything i can try can you please let me know! also if there is nothing i can do and i have to take it in to my service provider then will they know what i have done?
thank you.
Click to expand...
Click to collapse
flypubec said:
That's correct. Original GB bootloaders are provided within the package.
Click to expand...
Click to collapse
Thats from the creator of the i9000 ROM you just flashed.
Your phone is 100% bricked, just wondering why did you flash an i9000 ROM on a i9100 ROM, thats not only the wrong phone, but you also added a PIT files with Odin which also is not good for the i9100, and this ROM contains bootloaders.
its 100% bricked, however there is light at the end of the tunnel. A good friend of mine at Mobile Tech Videos can fix your phone 100%
hes the only guy that can do this around the world, only does it for 50 dollars, and he can guarantee fix your phone.
Just dont do this again, maybe next time flash DlevROM
Dlev7 said:
Thats from the creator of the i9000 ROM you just flashed.
Your phone is 100% bricked, just wondering why did you flash an i9000 ROM on a i9100 ROM, thats not only the wrong phone, but you also added a PIT files with Odin which also is not good for the i9100, and this ROM contains bootloaders.
its 100% bricked, however there is light at the end of the tunnel. A good friend of mine at Mobile Tech Videos can fix your phone 100%
hes the only guy that can do this around the world, only does it for 50 dollars, and he can guarantee fix your phone.
Just dont do this again, maybe next time flash DlevROM
Click to expand...
Click to collapse
i am very embarrassed about it. im new to this and i didnt notice that it was the wrong ROM. but why would i send it to your friend and not back to samsung? im sorry but im a little iffy about sending out my phone when there are 5 reviews, all with 5 stars and i have been searching and i havent found someone else with a hard bricked samsung galaxy s2.
thanks
katiezoppo said:
i am very embarrassed about it. im new to this and i didnt notice that it was the wrong ROM. but why would i send it to your friend and not back to samsung? im sorry but im a little iffy about sending out my phone when there are 5 reviews, all with 5 stars and i have been searching and i havent found someone else with a hard bricked samsung galaxy s2.
thanks
Click to expand...
Click to collapse
I mean this guy is 100% trusted, and email him if you have questions.
hes the best bet for getting it back fast, and working.
Samsung will most likely play games, take longer, and ask you how this happened.
its your choice, but hes 100% legit, you dont have to use him Im just saying this is the best bet for saving you
Maybe if is better to send it to Samsung and let them figure it out.
If they ask what happened, just tell them that you left it on charger snd a few hours after it was dead. After all i doubt that theg can get info from inside the phone.
They will make a clean flash plus bootloaders.
That is what would i have done.
Sent from my GT-I9100 using xda premium
mariosraptor said:
Maybe if is better to send it to Samsung and let them figure it out.
If they ask what happened, just tell them that you left it on charger snd a few hours after it was dead. After all i doubt that theg can get info from inside the phone.
They will make a clean flash plus bootloaders.
That is what would i have done.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
They can access everything on your phone if they have it in their hand. The only thing is : Do they really give a f**k about what you really did. It's longuer to ask question than to only repair.
Just send your phone to get repaired. then next time please read properly and more carefully before you start playing with rooting and flashing
wow
i want my 3 mins back reading this thread...
this is unbelievable
ok im sorry i understand that you feel like you want to critisize people when they make mistakes but there is no reason to try to make me feel any stupider right now, if there is nothing productive you can say then please dont say anything at all.
thank you
katiezoppo said:
ok im sorry i understand that you feel like you want to critisize people when they make mistakes but there is no reason to try to make me feel any stupider right now, if there is nothing productive you can say then please dont say anything at all.
thank you
Click to expand...
Click to collapse
the reason why you should send it to dlev's friends shop to get it fixed instead of samsung is if samsung finds out what you did to the phone, they will probably charge you an arm and a leg for it...
the site looks legit to me...was that productive enough for you?
Send it to sammy. If they wsnt to charge you alot then take it to the other site.
Sent from my GT-I9100 using xda premium
thanksgiving60 said:
the reason why you should send it to dlev's friends shop to get it fixed instead of samsung is if samsung finds out what you did to the phone, they will probably charge you an arm and a leg for it...
the site looks legit to me...was that productive enough for you?
Click to expand...
Click to collapse
Hmmm let me think Dlev mate or samsung were she would be still under warranty...hard choice i guess
katiezoppo said:
ok im sorry i understand that you feel like you want to critisize people when they make mistakes but there is no reason to try to make me feel any stupider right now, if there is nothing productive you can say then please dont say anything at all.
thank you
Click to expand...
Click to collapse
Unlucky my friend....on a brighter note....maybe you could get the rights on the word "Stupider"? is this realy a word? sounds cool though
Matriak31 said:
Hmmm let me think Dlev mate or samsung were she would be still under warranty...hard choice i guess
Click to expand...
Click to collapse
if OP does end up sending it to samsung, then i hope samsung doesnt find out or just simply doesnt care
thanksgiving60 said:
if OP does end up sending it to samsung, then i hope samsung doesnt find out or just simply doesnt care
Click to expand...
Click to collapse
well she should because one they WONT charge her and two i know who i out of the two i would trust to send my phone to. and the OP when she sends it should just mention something wrong happened hence why the phone is the way it is now...Either way its her(sorry just going by the Katie bit) to do what she wants..Either way i hope the OP get's the phone fixed and next time reads before she does flashing or roots....
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?
Hi people, I have a i777 but the phone does not turn on at all, what happens is that it will turn the screen on when you plug it in, show the battery image for less then a second and do that 2-3 times before it just stays blank. computer doesnt recognize it or do anything when pluged to it.
Left it plugged in to charge and the phone got very hot. I have not attempted anything with the phone its not even rooted, just stopped working.
Please if any one has any tips or anything that can assist I would really appreciate it.
When did you buy it?
Did you try a battery pull, wait a bit, then put it back and connect the charger without turning it on.
Cetus90 said:
Hi people, I have a i777 but the phone does not turn on at all, what happens is that it will turn the screen on when you plug it in, show the battery image for less then a second and do that 2-3 times before it just stays blank. computer doesnt recognize it or do anything when pluged to it.
Left it plugged in to charge and the phone got very hot. I have not attempted anything with the phone its not even rooted, just stopped working.
Please if any one has any tips or anything that can assist I would really appreciate it.
Click to expand...
Click to collapse
I would say return it for a replacement.
Sent from my GT-I9100 using xda premium
chadrick.7 said:
I would say return it for a replacement.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yea but first it would be good to remove any personal things and backup what you can before doing so.
Have you tried getting into recovery or download mode.
sent from my Shostock Sgh-I777 running siyah!
Hey guys sry for reviving this thread its just ive been reading and its driving me kinda crazy. ( i miss my Palm !!!)
So i figured out somethings about the phone, It does go into bootloader mode only if i take out the battery and plug it in, with battery it does nothing at all.
Theres so much info about roms and all this other things i cant quite figure exactly what i need to do with the phone. I'm trying to find a stock rom, but like i said i don't know if its the room, bootloader, kernal or what the hell it needs to fix it.
Please anytips or questions or leads that can guide me.
Model is SGH I777
(Also can't really return it or do anything with at&t since I'm in Colombia, plus att just sucks)
Cetus90 said:
Hey guys sry for reviving this thread its just ive been reading and its driving me kinda crazy. ( i miss my Palm !!!)
So i figured out somethings about the phone, It does go into bootloader mode only if i take out the battery and plug it in, with battery it does nothing at all.
Theres so much info about roms and all this other things i cant quite figure exactly what i need to do with the phone. I'm trying to find a stock rom, but like i said i don't know if its the room, bootloader, kernal or what the hell it needs to fix it.
Please anytips or questions or leads that can guide me.
Model is SGH I777
(Also can't really return it or do anything with at&t since I'm in Colombia, plus att just sucks)
Click to expand...
Click to collapse
It would be helpful if you could give some details of the problem that you have. We can't just assume that you have the exact same issue that the original poster described in the first post. Please describe your problem in detail. The phone will/won't turn on. The screen is/isn't completely dead. etc.
A little background would also be helpful. How long have you had the phone? Was it working before? Where did you get it? etc.
Need enough information to begin trouble shooting the problem. Will be happy to help if I can.
I had exactly the same problem with my SII. I bought an external charger for the battery, recharged the battery using that and worked fine afterwards (the charger I bought came with a couple of spares which was a bonus as well ;-).
My guess is the battery is empty, leave it on the charger for a bit and try again
Sent from my SGH-I777 using xda premium
creepyncrawly said:
It would be helpful if you could give some details of the problem that you have. We can't just assume that you have the exact same issue that the original poster described in the first post. Please describe your problem in detail. The phone will/won't turn on. The screen is/isn't completely dead. etc.
A little background would also be helpful. How long have you had the phone? Was it working before? Where did you get it? etc.
Need enough information to begin trouble shooting the problem. Will be happy to help if I can.
Click to expand...
Click to collapse
LOL creepy he is the op.
sent from my Shostock Sgh-I777 running siyah!
Hey there,
I had a similar problem with my battery, it turns out that the charger I was using essentially fried my battery.
Go to an AT&T store (which stock i777 batteries and USB chargers) and explain your problem to them. If this just happened without installing any ROMs or rooting, there's no reason to flash anything, and it's likely a hardware problem. Explain the problem and they will let you borrow a new battery and charging cable to see if it makes a difference.
Otherwise, if this happened out of the blue like that, without any interventions or changes on your part, you should take the advice of the other posters and make use of your warranty.
- Flaw
Intub8 said:
LOL creepy he is the op.
sent from my Shostock Sgh-I777 running siyah!
Click to expand...
Click to collapse
Blind... lol
Thanks guys for the responses.
*story is i sold the phone to someone and i brought it back since it was not turning on*
Ive had time now to research a bit on android and this phone.
I think its hard bricked the phone does not go to download mode when you press the keys even with a full battery *charged it in anoher phone*
I can get it into download mode only when he battery is taken out of the phone... Once its in download mode i tried to flash the stock rom with Odin and stock kernel, but when its done flashing the phone tries to restart but nothing happens the screens turns on and off and the bottom keys flash in and out.
Ive read that you can use a Jtag or w/e you call it *the micro usb with the resistors in i* but since im in Colombia its hard to find those type of electronics off he shelf*
Anyway if any one has any thoughts or ideas to fixing it with out the battery in it while its in download mode i would really appriciate it ^_^
thanks again for the responses
warranty exchange
Cetus90 said:
Hi people, I have a i777 but the phone does not turn on at all, what happens is that it will turn the screen on when you plug it in, show the battery image for less then a second and do that 2-3 times before it just stays blank. computer doesnt recognize it or do anything when pluged to it.
Left it plugged in to charge and the phone got very hot. I have not attempted anything with the phone its not even rooted, just stopped working.
Please if any one has any tips or anything that can assist I would really appreciate it.
Click to expand...
Click to collapse
Im just asking since you didnt mention it... Did you press the power button for at least 3 seconds? My Grandfather did this. Took back his phone only to discover that he had not pushed the power button long enough to turn it on. Sometimes you never know...
I had this same problem. Discovered it was just a dead battery. Battery in, I get nothing. Battery out and I can see the buttons flash when connected to a power source. So obviously its the battery.
edit: Since I still have the dead battery thought I would test out the download mode. Got it to boot into download mode without the battery, then started to put in the battery. As soon as the contacts touched, my phone turned off. No idea what happened to this battery..
Cetus90 said:
Thanks guys for the responses.
*story is i sold the phone to someone and i brought it back since it was not turning on*
Ive had time now to research a bit on android and this phone.
I think its hard bricked the phone does not go to download mode when you press the keys even with a full battery *charged it in anoher phone*
I can get it into download mode only when he battery is taken out of the phone... Once its in download mode i tried to flash the stock rom with Odin and stock kernel, but when its done flashing the phone tries to restart but nothing happens the screens turns on and off and the bottom keys flash in and out.
Ive read that you can use a Jtag or w/e you call it *the micro usb with the resistors in i* but since im in Colombia its hard to find those type of electronics off he shelf*
Anyway if any one has any thoughts or ideas to fixing it with out the battery in it while its in download mode i would really appriciate it ^_^
thanks again for the responses
Click to expand...
Click to collapse
Not sure what you used to flash back to stock, but if you didn't try it already, I would try the full stock package with bootloaders, param.lfs and all. Go to the Download Repository and flash the I777UCKH7-CL503881 Stock Binaries. The one-click downloader would be fine.
As far as the battery goes, even though you charged it in another phone, it may still be faulty. To test, use a known good battery from another phone.
Oh, and one other thing. Just curious, was the phone working normally when you sold it?
creepyncrawly said:
Not sure what you used to flash back to stock, but if you didn't try it already, I would try the full stock package with bootloaders, param.lfs and all. Go to the Download Repository and flash the I777UCKH7-CL503881 Stock Binaries. The one-click downloader would be fine.
As far as the battery goes, even though you charged it in another phone, it may still be faulty. To test, use a known good battery from another phone.
Oh, and one other thing. Just curious, was the phone working normally when you sold it?
Click to expand...
Click to collapse
Yes it was working.
Thanks alot for that info ill try it tonight or tomorrow!
Also i think ill be making a video showing whats going on and ill get a battery from a friend to test out, thanks alot again this really has helped me understand more ^^
Cetus90 said:
Yes it was working.
Click to expand...
Click to collapse
Seems to me you were generous to take it back. I wouldn't be surprised if the person flashed some firmware not intended for the I777, with bootloaders and param.lfs and such.
Yeah but kinda had a deal so not loosing much but i still want to fix it.
Let me ask you guys will it be fine to flash without the battery in the phone? Since it does open up the bootloader to and Odin detects it.
-----------------
---This first post is outdated. My current question is one post below. I've left the content of this post for other noobs to see.
-----------------
Hey folks, sorry to bother you all but all input would be greatly appreciated. I'm rather unfamiliar with android flashing and kernels, and have spent the last 8 hours trying to figure this out to no avail.
Following this (http://forum.xda-developers.com/showthread.php?t=1238070) (section 5) guide on how to get back to stock gingerbread on my phone (after a few partially failed attempts flashing other roms), I was using Odin, had the .pit 2.2 as well as CI500_VZW_EH03_GB_CM.tar.md5 loaded into the program and left it running. About 20 mins in, the phone stopped progressing and I started to get concerned. After two hours, I powered down the phone and proceeded to reattempt the flash. This is when things got weird. My phone was unable to enter the Download Mode and instead showed Android system recovery when plugged in, or a black screen with a phone and a computer, with arrows between when not plugged in. The weirdest part is that the phone no longer recognized vol+ or the power button when in Android Recovery, and could only vol- to go down the menu, then was stuck at the bottom of the list.
I've searched everywhere on this site, and google to try and come up with a solution.
When pluggin into the computer, I hear a connection sound, but the device is not recognized by Odin. Pressing the running a blind vol+ and vol-, then a vol- to hope Odin recognizes the device, as pointed out in this (http://forum.xda-developers.com/showthread.php?t=1764022) thread, resulted in nothing. Holding vol- while pluggin in the usb cable, doesn't show the download mode. All of the steps in this (http://forum.xda-developers.com/showthread.php?t=1026746) thread proved futile, as most of them required download mode anyways.
I'm going to keep searching and keep you posted as things come. Your help as always will be greatly appreciated!
Edit: Things just got weirder... After a few more attempts at making this work, I'm now getting an "Unable to charge non-supported battery. See user manual." With this error, I'm not able to get into Android Recovery anymore. More searching...
Edit 2: AFAIK I'm gonna need a jig. Anyone confirm?
Edit 3: Got a jig, Download Mode working, all is well. Please remove this thread, or leave it for other noob flashers to see.
Hey Folks, its been a while since I last posted in this forum, but I ran into a pretty serious issue earlier this evening. I was attempting to flash CM9 to my T959D and was running into tonnes of trouble. Throughout my attempts I was restoring back to stock rom, kernel and bootloader. During one of these restores, Odin froze in Win 7. Since then I've been unable to detect any form of life from the phone. It simply sits in a black screen. Holding the vol down while booting, blind vol up and down cable inserting, using my Jig and inserting the cable/battery in various orders results in nothing. The most I hear is a device failure to connect sound in Windows with no sign of life in Odin.
What can I do?
Someone posted stating leaving the battery out for multiple days would reset something on the motherboard, allowing me to get into download mode. Though I was hoping to have this resolved tonight. I realize that there aren't many people left with these phones, but I hope someone has a solution to this.
I'm going to be installing ubuntu tonight on an older desktop in a effort to resolve this. Though my experience with it is very limited, and success is unknown.
NOT GOOD... You should wait and see if others have a better solution, but Unbrickable Mod may be your only option.
Posted from my Fascinate using XDA Premium
MultipleMonomials said:
NOT GOOD... You should wait and see if others have a better solution, but Unbrickable Mod may be your only option.
Posted from my Fascinate using XDA Premium
Click to expand...
Click to collapse
Thats not good to hear. Well, I was snooping around looking for someone who could solder this for me, to no avail. My soldering skills are non existent. The most I fixed was a door bell, and I did a terrible job. I won't be able to get my hands on a soldering iron until tomorrow, is it worth trying?
I have located someone who can do a jtag on this model but have a few questions in regards to this:
Since my bootloader was corrupted, would the jtag service put a new bootloader on?
Would it prevent the same thing from happening again?
Are jtags designed on a per-phone basis?
Since there is a telus fascinate T959D as well as a verizon fascinate, and both phones are completely different, would I need to make sure the jtag is meant for this phone?
Is there anything I need to be made aware of before doing this that I haven't mentioned?
I've haven't had any experience with JTAG, but I've heard Unbrickable Mod is preferable. If you're looking for someone who can solder, check out your local RC/hobby store. If that fails, check out an electronics store, though it may take some searching to find one.
Posted from my Galaxy Tab with CM10
TheMegosh said:
Thats not good to hear. Well, I was snooping around looking for someone who could solder this for me, to no avail. My soldering skills are non existent. The most I fixed was a door bell, and I did a terrible job. I won't be able to get my hands on a soldering iron until tomorrow, is it worth trying?
I have located someone who can do a jtag on this model but have a few questions in regards to this:
Since my bootloader was corrupted, would the jtag service put a new bootloader on?
Would it prevent the same thing from happening again?
Are jtags designed on a per-phone basis?
Since there is a telus fascinate T959D as well as a verizon fascinate, and both phones are completely different, would I need to make sure the jtag is meant for this phone?
Is there anything I need to be made aware of before doing this that I haven't mentioned?
Click to expand...
Click to collapse
Make sure you use the stock Samsung cable see if you can reinstall the drivers hook it into the computer and hold volume down if you can get any type of signal from the phone your good.
Sent from my SCH-I500 using Tapatalk 2
---------- Post added at 04:27 PM ---------- Previous post was at 04:24 PM ----------
MultipleMonomials said:
I've haven't had any experience with JTAG, but I've heard Unbrickable Mod is preferable. If you're looking for someone who can solder, check out your local RC/hobby store. If that fails, check out an electronics store, though it may take some searching to find one.
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
Hey no offence but stop telling everyone on the street they need too soljeir there phone with unbrickable mod before they can fix I'm tired of having too calm the person down after you said they have too open up the phone its utter bull****. 1 out of 10 soft bricks you may need it I've been without download mode and fixed mine just fine.
Sent from my SCH-I500 using Tapatalk 2
An update:
Took my phone in to get the jtag service... He said some of my partitions were corrupted, one of which was the boot layer. He put a new bootloader on, and showed it could be placed back into recovery and download mode, but when I got home the device was even more dead than when I left; no device failed to connect sound in windows, just nothing. I'm taking it back to him in a week after exams to get this resolved. Maybe the battery has reached the end of its life...? I checked it with a volt meter, and it had 3v+ so I really don't know.
Sent using Science!
As bbrad pointed out, there may be other solutions, and my answer could be totally wrong, but if even your bootloader is cooked, Unbrickable Mod may be your only hope. Since UM affects startup code literally hardwired into the chip, it should work as long as the JTAG doesn't interfere.
Posted from my Fascinate using XDA Premium
Another update. So apparently I flashed a bootloader from another phone, which royally screwed up the partition, kernel and mounted drives. The technician managed to get the original bootloader, kernel and rom on the phone and everything is working from stock again.
Why on earth is the 959d Telus version such a pain in the ass to customize?
Is there anyone on here that uses a 959d that can direct me to a proper method to leaving stock? Before this entire situation I had vodoo kernel on, with cwm, but every time I flashed a kernel it would hang on reboot and either sit on a black or white screen. In a lot of cases I would flash in cwm, reboot, then I would be brought back to cwm as if there was no rom on the phone at all, no matter what I formatted and wiped.
When I'm not on my phone I can link all of the guides I've tried that leave me back where I started. So I re flash back to stock using Odin.
At the end of the day, I have to ask, is it really worth it in the end? I've rooted and flashed many roms on other phones but have never run into as many problems as with this fascinate t959d
Sent using Science!
I just got a galaxy note for my galaxy nexus last night (traded) and I took it home and install goomanager and downloaded a rom that was "compatible" it saved to the directory that goomanager puts it in so I rebooted into CWMR and cleared cache / data etc then proceeded to install zip from SD Card. it started by saying flashing kernel 4% or whatever and then came back with an error. me being as bright as I am recently...I fixed permissions and rebooted thinking that it would at least let me back into recovery.
I now have a "Dead" note sitting on the floor infinitely "charging" so to speak its just plugged into the wall, Will not boot. Is there a way I can at least get it into Download mode? Hell stick a magnet on it to erase everything even?
I don't need another paper weight..I have an iPhone for that.
Can you boot into download? If so, use Odin to flash the correct kernel.
Can you boot into recovery? If so, flash the correct kernel.
If you can't do either one, your phone is bricked and you will need to send it for a repair. $50 and one week later you will have your phone back with stock 4.0.4 ICS rom. Its called a JTAG service, from www.mobiletechvideos.com. Many note user have gone there, from just this thing.
The jig that works with other phones 99% of the time won't work with the note.
Don't trust CWR. Get your roms from our developers.
Jig 99% Of the time won't work... you made that statistic up. If button combos aren't working it's definitely worth a shot, resistors are super cheap, especially compared to jtag which doesn't sound needed here yet.
And what do you mean. "Don't trust cwr get your roms from the devs here"?
That is a recovery... he didn't download anything with it, he used goomanager.
And even if he downloaded it from here...he would've flashed it in cwm... xda isn't a custom recovery...
So you tried holding the down volume button+ power to get it into download? Flashing a kernel will not remove your recovery/download mode unless you flashed a Rom not made for your device that installed something on said partition(s).
As for the jig...don't know statistics, but I am a one percenter. Worth a shot imo.
https://www.youtube.com/watch?v=6K-lvaAop2w&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I717 using Xparent Gray Tapatalk 2
Volume down and power, then when prompted volume up, for download mode.
And I'm also a "1% er" and my jig isn't homemade. Josh from mobile tech gave me one of his he sells on the site.
As nun said, the combos should work, they are in the bootloaders, flashing a kernel won't effect those unless says kernel is for a different device, then you wouldn't get a single thing outta the device at all, no charging screen, no bootloop. Nothing. Whatsoever.
studacris said:
Volume down and power, then when prompted volume up, for download mode.
And I'm also a "1% er" and my jig isn't homemade.
Click to expand...
Click to collapse
Right amigo 99% + 1% = 100%. You and Nunhugger are the only ones who said a jig worked for them. So actually its way higher than 99%. . . But you guys are ninjas. Your phone would probably reboot if you just told it to. I just wanted to kill the eventual jig question early.
And my response about CWR was because it sounded like he used the old app Rom Manager to see what was available. Clearly it was wrong so I told him not to trust it, and put in a plug for our developers.
When an update is released the forum gets slammed with complaints about bad flashes of incorrect kernels, and I have seen several members heal their phone by flashing the correct kernel. I just figured he was not accustomed to the button combos of the note and would get to that eventually. But if it was for the wrong device I wanted him to get his mind around the $50 and week wait.
Sheesh. . . decaf.
Well seeing that I can't Get into either mode and no button combos will work, I am assuming I need the JTAG. I figured an app like GooManager would have at least gave me the right roms for my device. it did say i717 but that could just be my memory playing tricks on me.
Man, I'm real sorry. But the JTAG service has been used by many, and with lots of positive comments. Good luck.
hahah thats okay, I mean its a great phone, definately not worth keeping in a draw collecting dust so I will go with the JTAG service. Thanks Guys!
You still have signs of life, it shows the charging animation, therefore your phone isn't bricked.
Do some searching on making a jig, I personally think it's well worth a try.
You could very well fix your phone for under $10 and have the satisfaction of accomplishing this yourself And have the know how to do it again...
It doesn't have the charging animation. just a dead black screen.
Then why did you say this?:
leveliv said:
I now have a "Dead" note sitting on the floor infinitely "charging" so to speak its just plugged into the wall, Will not boot.
Click to expand...
Click to collapse
That's more than a little misleading...
Will not boot...could mean many things.
From a easily fixed bootloop down to a brick.
Saying it was infinitely charging made it sound less severe.
if it weren't for that line, I wouldn't have bothered to tell you to use a jig.
JTAG it is
cris, why do you need to experiment with finding the proper resistance? Why should there be any variability in that circuit? Perhaps that is why some users have used up as many as six usb port replacement parts.
By the way, my 99% statistic is, like my entire post, just my opinion, and strictly a figure of speech. If it were a fact I was quoting I would have included a footnote. Remember those painful things? Do we have to include disclaimers for any figure we use? Sorry to mislead anyone!
I said "dead" because its not necessarily dead because a JTAG thing can fix it..and I said "charging" because to the normal person who didn't know anything was wrong with said device it would look like it was charging. But anyhow. I'm sending the phone out this week. I just don't understand why all the phones can't be as open as the devices straight from google.
You're phone is dead.
JTAG is akin to zombie, the phone needs disassembled and a special rig is needed to hook to the motherboard and flash EVERYTHING back to the nand at the prebootloader level.
The I717 is pretty much just as open as a nexus as far as easily modified and rooted...
No locked bootloader even which nexus have though it's a single line in a terminal to unlock, that step isn't needed on this device.
Only thing that isn't as open is the hardware drivers.
You may have flashed an incompatible kernel for a DIFFERENT device... and that on any phone will brick you.
And ranger not sure if it's the circuits within the phones that vary from device to device, ands seem to require a more specific voltage across those pins to trigger download mode
Or, if It's the resistors that are the variable. They are only rated within a certain +/- tolerance the cheaper ones having a larger margin of error.
And lol yes I am a ninja, but I didn't do anything special to my jig at all, I got mine from mobiletechvideos, funny enough it's worked on 4 captivates, a vibrant, 2 note 1s, and an s3, but didn't work on an s2 I was fixing.
the one I got from Goomanager was probably for the i700 which shouldn't even be able to happen.
They have video proof of them fixing phones with dead black screens from exactly what happened to mine using the JTAG Method. As far as I am concerned this thread can be closed cause I got the answer to my question.
the JTAG rewrites basically everything anyways so it is being sent out later this week. Till then I'll use a blackberry or something...Take care guys hopefully next time you see me post it will be to help someone and not asking for help
You'll be up and running by next weekend. By then, lots of exciting development will be happening on the released rom.
I doubt it, I live in Canada and have to send it to the states. It probably be closer to the weekend. Unless I expedite everything.