hey! i was on a custom rom for quite some time and all was well till today. my phone suddenly stuck/jam/lag then it rebooted to a grey and white line screen. tried going to recovery but couldnt. went to download mode and tried to flash stock with odin but it wrote
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
can some one help please? :crying:
muhdzahil said:
hey! i was on a custom rom for quite some time and all was well till today. my phone suddenly stuck/jam/lag then it rebooted to a grey and white line screen. tried going to recovery but couldnt. went to download mode and tried to flash stock with odin but it wrote
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
can some one help please? :crying:
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED
You need a service centre repair you have damaged Partition Information Table .
jje
Related
When i came home my phone would bot respond to unlocking the screen so i've pulled the battery and powered on and then the screen was white and full of horizontal lines . At first i thought that there was something wrong with the screen connector becaus the scrreen lokked different when phnone was off charger was plugged in and different than normally turned on. But with hope i've tried booting to recovery again lines. but booting to download mode worked.
Then i've searched over xda and few other sites (mostly linking here)
I've tried flashing single file stock rom:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
then i've downoaded mx.pit file tried with repartition and there was:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've pulled battery for 15 min ant the same thing happend.
I even tried updating via KIES in download mode but there was an error . in the begining of the update.
The warranty of the phone was voided few months ago.
Is there anything I can still do at this point (maybe finding proper pit file .... bit i dont know how to match it to my gt-i9300 16GB version)
Will someone better equipped will be able to repair it or i have to brace myself for the cost of a new phone (mainboards are as expensive ad used s3)?
is this what you have ?
przemo-c said:
When i came home my phone would bot respond to unlocking the screen so i've pulled the battery and powered on and then the screen was white and full of horizontal lines . At first i thought that there was something wrong with the screen connector becaus the scrreen lokked different when phnone was off charger was plugged in and different than normally turned on. But with hope i've tried booting to recovery again lines. but booting to download mode worked.
Then i've searched over xda and few other sites (mostly linking here)
I've tried flashing single file stock rom:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
then i've downoaded mx.pit file tried with repartition and there was:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've pulled battery for 15 min ant the same thing happend.
I even tried updating via KIES in download mode but there was an error . in the begining of the update.
The warranty of the phone was voided few months ago.
Is there anything I can still do at this point (maybe finding proper pit file .... bit i dont know how to match it to my gt-i9300 16GB version)
Will someone better equipped will be able to repair it or i have to brace myself for the cost of a new phone (mainboards are as expensive ad used s3)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2379256
idanohh said:
http://forum.xda-developers.com/showthread.php?t=2379256
Click to expand...
Click to collapse
yes that's exactly the same problem
przemo-c said:
yes that's exactly the same problem
Click to expand...
Click to collapse
Well not exactly .. mine doesnt get stuck on :
Code:
Get PIT for mapping..
it goes further but fails anyway.
hi guys.
i have been searching for like 3 days on the internet how to unbrick my phone.
i have a gt-i9300
in odin mode
product name: GT-I9300
Custom binary download: no
Current Binary: Samsung Official
System Status: Custom
Click to expand...
Click to collapse
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i also cant get into recovery mode, i get a banl screen with some stripes.
there are similar questions on the net, but i still have product name in odin mode.
so i was hoping if there is a sollution.
thanks in advance guys
Questions go in the q&a forum, report your own post and ask a moderator to move it.
Search in general forum for rescue firmware, follow the instructions exactly. If this doesn't help then you may need a new motherboard.
Hello everyone
Today my phone randomly went into ***** mode and it didn't do anything when I pressed the home or power button. So I pulled out the battery and put it back in and started up the phone as this wasn't the first time that something likes this happend. But it didn't do anything. It just showed the Galaxy S III logo and that's it. So I tried to boot in recovery and tried to wipe all my data. But it gave like a thousand errors saying: Can't mount /cache/ ... Can't mount /sdcard/ etc... So I tried to flash stock rom with odin. It failed. So I googled about my problem and tried to flash the PIT (don't know if i'm saying it correctly) and it gives this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So after some research I found out about SDS (sudden death syndrome). It seems that my internal memory is damaged and I have to get a new motherboard or a new phone? Is there any way to fix this? As I can still acces download mode and recovery mode (although none of the functions work).
I had cyanogenmod 11.2 M12 on it, so android 4.4.
Thanks!
Try the rescue firmware from general forum, flash with the pit file that thread contains.
If that fails then downgrade bootloader to BLFB first before flashing.
If none of that works then nand is burned out, time for a new phone.
nope, none of the solutions you said worked, guess it's time for a new phone... RIP my $$$
michownz said:
Hello everyone
Today my phone randomly went into ***** mode and it didn't do anything when I pressed the home or power button. So I pulled out the battery and put it back in and started up the phone as this wasn't the first time that something likes this happend. But it didn't do anything. It just showed the Galaxy S III logo and that's it. So I tried to boot in recovery and tried to wipe all my data. But it gave like a thousand errors saying: Can't mount /cache/ ... Can't mount /sdcard/ etc... So I tried to flash stock rom with odin. It failed. So I googled about my problem and tried to flash the PIT (don't know if i'm saying it correctly) and it gives this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So after some research I found out about SDS (sudden death syndrome). It seems that my internal memory is damaged and I have to get a new motherboard or a new phone? Is there any way to fix this? As I can still acces download mode and recovery mode (although none of the functions work).
I had cyanogenmod 11.2 M12 on it, so android 4.4.
Thanks!
Click to expand...
Click to collapse
Sudden death didn't be fixed in 4.1.2 ?
Sent from my GT-I9300 using XDA Free mobile app
Sudden death was due to a bug in the nand memory wear levelling code, the memory still wears out now -but not so fast.
michownz said:
Hello everyone
Today my phone randomly went into ***** mode and it didn't do anything when I pressed the home or power button. So I pulled out the battery and put it back in and started up the phone as this wasn't the first time that something likes this happend. But it didn't do anything. It just showed the Galaxy S III logo and that's it. So I tried to boot in recovery and tried to wipe all my data. But it gave like a thousand errors saying: Can't mount /cache/ ... Can't mount /sdcard/ etc... So I tried to flash stock rom with odin. It failed. So I googled about my problem and tried to flash the PIT (don't know if i'm saying it correctly) and it gives this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So after some research I found out about SDS (sudden death syndrome). It seems that my internal memory is damaged and I have to get a new motherboard or a new phone? Is there any way to fix this? As I can still acces download mode and recovery mode (although none of the functions work).
I had cyanogenmod 11.2 M12 on it, so android 4.4.
Thanks!
Click to expand...
Click to collapse
can you try flashing the later twrp through odin?
http://techerrata.com/browse/twrp2/i9300
check if any of the functions work
also here is an thread abou an dead/bricked s3 but it contains in op pit file!
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
and if necessary here you can find bootloader
http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-stock-kernel-bootloaders-t2189063
good luck
disclwd65 said:
can you try flashing the later twrp through odin?
http://techerrata.com/browse/twrp2/i9300
check if any of the functions work
also here is an thread abou an dead/bricked s3 but it contains in op pit file!
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
and if necessary here you can find bootloader
http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-stock-kernel-bootloaders-t2189063
good luck
Click to expand...
Click to collapse
With the PIT I get this:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
It's pretty much stuck there forever. But the other fixes all gave the same error.
michownz said:
With the PIT I get this:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
It's pretty much stuck there forever. But the other fixes all gave the same error.
Click to expand...
Click to collapse
hmmm thats strange, okey i guess your device is probably dead
Hi!
So a question I think I hard bricked my S3
I've installed the lollipop custom rom on it and it worked fine for 3-4 of days after one night charging I found device unresponsive so I've pull the battery out and now I get this when device is turning on:
i.imgur.com/TV5xhAh.jpg
Do you know guys what happen?
I can go in to download mode but Odin doesn't allow nothing pass giving an error:
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
Or when I try do add pit:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you guys know what I may have done? Is there any solution to this?
Thanks for any help or info
lpooltech-uk said:
Hi!
So a question I think I hard bricked my S3
I've installed the lollipop custom rom on it and it worked fine for 3-4 of days after one night charging I found device unresponsive so I've pull the battery out and now I get this when device is turning on:
i.imgur.com/TV5xhAh.jpg
Do you know guys what happen?
I can go in to download mode but Odin doesn't allow nothing pass giving an error:
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
Or when I try do add pit:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you guys know what I may have done? Is there any solution to this?
Thanks for any help or info
Click to expand...
Click to collapse
You don’t need Odin to flash something, you can flash a zip file from your custom recovery.
josephiskandar said:
You don’t need Odin to flash something, you can flash a zip file from your custom recovery.
Click to expand...
Click to collapse
Hey I can't access the recovery just the download mod and nothing else
lpooltech-uk said:
Hey I can't access the recovery just the download mod and nothing else
Click to expand...
Click to collapse
Ok you hadn’t mentioned it so I thought you might be able to.
A hard brick is when you cannot boot your phone into any mode.
From what I’ve read your case is called a sudden death (SDS), so try to search for it.
lpooltech-uk said:
Hi!
So a question I think I hard bricked my S3
I've installed the lollipop custom rom on it and it worked fine for 3-4 of days after one night charging I found device unresponsive so I've pull the battery out and now I get this when device is turning on:
i.imgur.com/TV5xhAh.jpg
Do you know guys what happen?
I can go in to download mode but Odin doesn't allow nothing pass giving an error:
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
Or when I try do add pit:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you guys know what I may have done? Is there any solution to this?
Thanks for any help or info
Click to expand...
Click to collapse
You need service repair seen many posts like this example >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << white screen is the sign of the complete eMMC failure I have not seen any posts that have solved this with a software solution.
tallman43 said:
You need service repair seen many posts like this example >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << white screen is the sign of the complete eMMC failure I have not seen any posts that have solved this with a software solution.
Click to expand...
Click to collapse
Thank you for the answer! I already replaced my phone with New one but I wonder would change of the motherboard help me I see few not too expensive on eBay.
lpooltech-uk said:
Thank you for the answer! I already replaced my phone with New one but I wonder would change of the motherboard help me I see few not too expensive on eBay.
Click to expand...
Click to collapse
There are in fact some cheap used motherboards sold on eBay.
If you feel confident with replacing it, all steps are explained in images and video.
Be careful as you may need to take off the rear camera from your old motherboard and plug it on the new one.
so i was installing a custom recovery (twrp) and when i rebooted it from flashify it got stuck in the Samsung logo screen, now i was trying to use odin to put a stock firmware on to the device and fails every time showing an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after this failure on the top left of the downloading screen it says ''sw rev. check fail device 3 binary 1''
PLZ HELP
First, you are on the wrong forum.. there is a section for the galaxy edge.. this is normal galaxy s6. Second.. you be be flashing a wrong file not ment for the sm-g925f
groszczak said:
so i was installing a custom recovery (twrp) and when i rebooted it from flashify it got stuck in the Samsung logo screen, now i was trying to use odin to put a stock firmware on to the device and fails every time showing an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after this failure on the top left of the downloading screen it says ''sw rev. check fail device 3 binary 1''
PLZ HELP
Click to expand...
Click to collapse
It means you are flashing firmware that is not compatible for your model.
use samfirm to find the correct firmware and use odin 3.10