Using Stephens 2.2 I was able to install apps from the market place.
I then did a couple of things, 1 was to install Universal Androot, the other was to configure my APN settings.
After that I'm unable to install anything from the Market (just paid for 2 apps as well).
Tried a few things, (clear cache, airplane mode etc) but nothing tried so far works, I suspect it could be wrong APN settings, can anyone post their O2 apn settings so I can double check?.
Can anyone suggest anything else to try (i did see a post saying to uninstall market updates from options, but can't find that app (the instructions were a bit vague so I could be missing something).
Thanks
There is a problem with the market either very slow at downloading or it wont download you just have to be patient and keep trying
You mean I've just factory reset my phone for nothing !!!!!!
Fill in adequate expletives here
lufc said:
There is a problem with the market either very slow at downloading or it wont download you just have to be patient and keep trying
Click to expand...
Click to collapse
I'm not sure quite how but I seem to have sorted it out, earlier it wouldn't download
using APN settings I found elsewhere, these were as follows (trying to help others),
----------------------------------------------------------
Name: O2 Internet
APN: mobile.o2.co.uk
username: vertigo
password: password
MCC:234
MNC 10
APN type: default (actually type in default, don't leave it blank)
All others remain as "not set".
2nd access point
Name: O2 MMS
APN: wap.o2.co.uk
proxy: http://wap.o2.co.uk
port:9201
username: o2wap
password: password
server: http://mmsc.mms.o2.co.uk:8002
mmsc: http://mmsc.mms.o2.co.uk:8002
mms proxy: 193.113.200.195
MMS port: 8080
MCC: 234
MNC: 10
APN type: mms
---------------------
Neither the phone's own connection or my home wifi connection would work, did a factory re-set, no APN's configured, setup wireless and downloaded three or four apps from market no problems.
Did a bit more configuring on the phone and then needed some more apps only this time they wouldn't download, same issue as before. No APN's configured yet.
Tried all sorts of the recommended fixes but no success.
Stopped wifi configured this APN :-
------------------------------------------------
Name o2
APN mobile.o2.co.uk
Username mobileweb
Password password
------------------------------------------------
I dont think I rebooted, but after enabling the connection and giving it a couple of minutes to settle, then trying a web page I went back to market and apps have downloaded since (5 apps).
Sometimes I get a "Network Error" when starting and have to close market and try again but so far have managed to install 5 apps.
So, wifi connection sometimes works, which got me wondering :-
I read somewhere that Market uses different ports, is there a list of ports (will search after this) and do they sometimes switch ports, eg if there's a number of connections on one port do they switch to another (and this one is blocked by my firewall).
Do they blacklist certain IP's during busy times, eg server is really busy and I've downloaded apps for 20 minutes (really slow connection at home) so they block my IP ?.
In other words, is this deliberate in order to share overloaded bandwidth fairly ? rather than a problem with phones/settings themselves.
So I know this seems to be an issue but cant seem to find a straight answer.
I got my vibrant a few days ago and do not know what rom I am running. I am using Tmobile and I am able to recieve MMS's blurry, and I can not send them. However I updated the APN settings to these
Name: Simple
APN: simple
Proxy: 216.155.165.050
Port: 8080
Username: Not set
Password: Not set
Server: Not set
MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: 216.155.165.050
MMS port: 8080
MCC: 310
MNC: 260
Aunthentication type: PAP
APN type: internet + mms
Now when I performed this last night working station 3.I was using wifi calling and all of a sudden was able to send MMS no problem. I left and was on regular network and still I could send...no matter what I still recieved blurry ones. I woke up today and went to work at station 4. I again could not send MMS's at all (was on wifi calling and tried normal network). I came back to station 3 and still could not send MMS. I checked my APN settings to make sure nothing changed, and alas it did not. I am on the wifi calling here. I retried and sure enough I can send...I changed nothing and am on wifi calling and when I was at station 4 this morning I was on wifi calling and it didnt work, and i tried on the regular network and it didnt work.
Sometimes I get a general "fail to send", while others I get "error connecting to the network"
My question is why is it working now after i checked the settings and changed nothing.? and how can I find what version and kind of ROM I am running?
Regardless of which I am finding a lot of topics, but cant seem to find a fix for both the blurry issue and not being able to send MMS.
Thanks guys for the understanding and cooperation this whole droid thing is new to me after being a blackberry head. I love the phone but I am still new to this whole thing, I am wish I knew how to update my kernel (if I knew what version or type of a ROM I am running).
I feel burnt out from pondering this all day.
For Att Compatible Phones:
Find below the values needed to update your device data settings to be able to send MMS* and connect to the Internet via your Browser:
1. CREATE A NEW APN (ACCESS POINT NAME). ENTER ONLY THE SETTINGS LISTED BELOW:
FIELD SETTINGS
NAME straight talk
APN att.mvno
PROXY proxy.mvno.tracfone.com
PORT 80
MMSC http://mmsc.cingular.com
MMS PROXY 66.209.11.33
MMS PORT 80
2. SELECT THE APN YOU JUST CREATED.
3. DELETE THE OLD APN FROM YOUR PHONE IF POSSIBLE.
Tmobile Compatible settings
FIELD SMARTPHONE SETTINGS ALL OTHER PHONES
NAME straight talk straight talk
APN wap.tracfone wap.tracfone
PROXY leave blank 216.155.165.40
PORT 8080 8080
MMSC http://mms.tracfone.com http://mms.tracfone.com
MMS PROXY leave blank 216.155.165.40
MMS PORT leave blank 8080
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
That's the settings I use for straight talk, works great. I get 4g just about everywhere here in pa. Mms works great too. I've had straight talk for a year and a half on at&t. Can't complain. If you use alot of cell data they will throttle you slow, but I'm usually close to wifi. I've heard 2GB then they slow you down.
Sent from my PantechP9070 using xda app-developers app
Bushmaster78FS said:
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
Click to expand...
Click to collapse
I'm getting 1.3Mbps down and 657 Kbps up. Pretty happy with it.
To the last poster, I thought Straight Talk didn't offer LTE coverage?! If it did, it'd be an even more amazing deal than I had thought it was!
My data works fine. Got like 6mbps this morn but my MMS wont send for ****. Using an Xperia Ion
Pantech Pocket ATT - Straight Talk MMS Settings
The Pantech Pocket needs to have the Straight Talk APN data loaded to TWO locations.
Both Phone APN and Wap APN need to be setup with the Straight Talk APN settings.
Straight Talk makes it sound like you only need to enter the information in one location.
You need to enter the information in Phone APN and Wap APN, if you want MMS to work!
APN name: Straight Talk
APN: att.mvno
Proxy: Straight Talk value
Port: 80
MMSC: Straight Talk value
MMS Proxy: 66.209.11.33
MMS Port: 80
My Pantech Pocket is running flawlessly on Straight Talk now. MMS is 100% functional. The pictures are getting through. I'm getting 5Mbps download speed and 1Mbps upload speed.
My Pantech burst uses only one apn. On gingerbread and ice cream sandwich. I don't run proxy but the rest of the settings I put in and works good. Seems faster tried it. 40kbps proxy vs 4000kbps no proxy. Not sure why. Any ideas?
Sent from my PantechP9070 using xda app-developers app
HOLY SH!T!!!
I just put in the settings Bushmaster78FS posted and I am now on TRUE 4G with ST. 6Mbps!!! ITS FASTER THAN MY WORKS WIFI BY 3X!!!
AMAZING!!! THANKS BUSHMASTER!
Nice
Thanks for the settings you posted Bushmaster.
The settings provided are the first ones I have used and successfully got both data and mms working with only one APN.
Using Samsung Galaxy S III.
1. My phone is unocked and compatible on both AT&T networks and T-Mobile right now i am using an blue AT&T sim and i am thinking to make the move to T-Mobile network. Do you think i can use the same AT&T compatible sim and just change the APN setting to T-Mobile and have it work on the T-Mobile network or so i have to buy a sim?
2. I heard that you can get a free sim by buying a free phone and just using it on your phone but other people say that those sims are lock to those phones. Which is true?
3. I see that Straight talk sells cheap GSM phones and my GF has her phone on T-Mobile so can i buy one of the ST phones and swap it to use on T-Mobile or are the locked and can they be unlocked?
I just switched from the default straight talk apn to the ones bushmaster posted. I went from 1 mbps to 4.8 on a Nexus 4.
Bushmaster78FS said:
Here is an interesting development... I flashed CyanogenMod 10 on my Sony Xperia arc S phone and the ROM downloaded some settings by itself. There are 3 APNs that comes with this ROM.
1. ATT
2. ATT LTE
3. StraightTalk ATT
StraightTalk was picked by default. I was about to delete them all and enter the settings from here but then I received a text message from a friend... Lo and behold, it was a MMS message with a pic attached and already downloaded. I saw that my WiFi was on, so I turned off the WiFi and asked my friend to send me more pics... They all arrived including a video snippet.... Then I sent one, a larger pic, and he received it. All amazed I fired up the CM10's browser and went to www.testmy.net Did a smarttest and my download was 3.4 Mbps and upload was 577 Kbps... In Phoenix, AZ...
Here are the settings that came with CM10 ...
Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
Does this make any sense now?
Click to expand...
Click to collapse
hey, so i been messing around a bit with everything and i think i found one that is faster: for
username: [email protected]
password: CINGULAR1
apn type: default,supl,mms,hipri
all others are the same i just added these and i feel (maybe placebo effect) its faster like almost 1.5mb.
the username n password i got from the att apn and hipri i guess means high priorty connection. need conformation tho works with n4
APn for Straight Talk on Pantech Breeze 3
shinb said:
hey, so i been messing around a bit with everything and i think i found one that is faster: for
username: [email protected]
password: CINGULAR1
apn type: default,supl,mms,hipri
all others are the same i just added these and i feel (maybe placebo effect) its faster like almost 1.5mb.
the username n password i got from the att apn and hipri i guess means high priorty connection. need conformation tho works with n4
Click to expand...
Click to collapse
I have a unlocked AT&T Pantech Breeze 3 with a Straight Talk sim in it. Am unable to access the web. All my settings still go to AT&T.
Does anyone know the correct APN settings?
I have to go 3 places to do the setups.
# 1 Messaging > Settings > Multimedia > MMS Settings
There I can enter Profile Name: MMSC: Connection Type: Proxy Address:& Proxy Port.
Does anyone know the correct values to put in here?
# 2 My Stuff > Applications > Browser > Manage > Profiles
Profile Name : Home URL: Connection Type : Proxy Address: Proxy Port
# 3 Settings > Network Connectivity > Connection Name > APN : Primary & secondary DNS : Linger Time : Authentication: Username :
Password
Does anyone know the correct values that I need to put in here in order to get my phone to go to the web.
I ha ve voice mail, can call and text. Just not access the web. Can anyone help me here?:
slotalkinwoman said:
I have a unlocked AT&T Pantech Breeze 3 with a Straight Talk sim in it. Am unable to access the web. All my settings still go to AT&T.
Does anyone know the correct APN settings?
I have to go 3 places to do the setups.
# 1 Messaging > Settings > Multimedia > MMS Settings
There I can enter Profile Name: MMSC: Connection Type: Proxy Address:& Proxy Port.
Does anyone know the correct values to put in here?
# 2 My Stuff > Applications > Browser > Manage > Profiles
Profile Name : Home URL: Connection Type : Proxy Address: Proxy Port
# 3 Settings > Network Connectivity > Connection Name > APN : Primary & secondary DNS : Linger Time : Authentication: Username :
Password
Does anyone know the correct values that I need to put in here in order to get my phone to go to the web.
I ha ve voice mail, can call and text. Just not access the web. Can anyone help me here?:
Click to expand...
Click to collapse
absolutely works now i wonder if my AOSP roms will have working RIL...
nocoast said:
absolutely works now i wonder if my AOSP roms will have working RIL...
Click to expand...
Click to collapse
OK, nocoast. You said they absolutely work, would you mind sharing the values with me that you put in all those blanks so that mine will work too.Thanks.
anyone try these settings on S2 i9100 and see speed gains?
APN set, no data.
Hey gang, I've looked far-and-wide and haven't been able to locate a solution so, I throw myself on y'all's mercy and ask if anyone has a clue why I can't receive wireless data on my SGT AT&T GT-P1000.
I received my AT&T Straight Talk SIM the other day and porting the phone over was no issue. However, when I set up the APN I did not immediately reboot the phone due to some confusion about when the service actually transferred. Could this have affected my registration on the ST wireless network?
I've entered the APN settings precisely but, alas, still cannot connect to the wireless data. I really want to move over to ST, not only will it save me $30 a month whilst adding an "unlimited" data plan but, best of all, I'll get to tell AT&T to go pound sand.
Any help would be greatly appreciated.
did you add in the " http://"?
Does anybody now any way to unthrotte. Since we all now that ST throttle after 5gb. I called to ST customers service, they told me that unlimited data is only for navigation.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
I have these setting’s on my AT&T HTC One that is unlocked.. Calls, SMS, MMS, WEB, Voicemail all work anywhere I’ve gone in the US.. I am here in Mexico for this week and I added the Mexico plan so I can roam out here but I can’t get my phone to connect out here. Do I need to change these APN settings? Please help
Name : metropcs
APN: Fast.t-mobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://metropcs.mmsmvno.com/mms/wapenc
MMS proxy: not set
MMS port: not set
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: Not set
APN enable/disable: APN enabled
Bearer: Unspecified
IF that company doesnt have agreements with cell companies in Mexico not sure your gonna have luck on that one....I know with att they have an agreement with a buncha companies to allow their sims to use outside towers..If not mistaken metropcs is running off sprint towers so might have some difficulty with this one...good luck
mobilecj said:
I have these setting’s on my AT&T HTC One that is unlocked.. Calls, SMS, MMS, WEB, Voicemail all work anywhere I’ve gone in the US.. I am here in Mexico for this week and I added the Mexico plan so I can roam out here but I can’t get my phone to connect out here. Do I need to change these APN settings? Please help
Name : metropcs
APN: Fast.t-mobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://metropcs.mmsmvno.com/mms/wapenc
MMS proxy: not set
MMS port: not set
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: Not set
APN enable/disable: APN enabled
Bearer: Unspecified
Click to expand...
Click to collapse
APN type should read: default,supl,mms. (No spaces after commas)
mexigga said:
APN type should read: default,supl,mms. (No spaces after commas)
Click to expand...
Click to collapse
Thanx I will try it now what will that change when I'm back in the states bc everything works fine with out that line just curious
Sent from my 831C using XDA Premium 4 mobile app
Maybe you guys can help me? My HTC One is only getting EDGE.
My HTC One that is being used with MetroPCS' BYOD plan is only getting EDGE, and not 3g, 4g, or even LTE. The phone was being used with Verizon Wireless before I got it. Everything works fine, but my data speed is super slow (EDGE 0.01 download and 0.01 upload). When I check the APN settings, it still says Verizon Wireless Internet. The people at my local MetroPCS store were no help since they don't know anything about APN settings. Thanks.
Racinglovian said:
My HTC One that is being used with MetroPCS' BYOD plan is only getting EDGE, and not 3g, 4g, or even LTE. The phone was being used with Verizon Wireless before I got it. Everything works fine, but my data speed is super slow (EDGE 0.01 download and 0.01 upload). When I check the APN settings, it still says Verizon Wireless Internet. The people at my local MetroPCS store were no help since they don't know anything about APN settings. Thanks.
Click to expand...
Click to collapse
Google found this >> http://forum.xda-developers.com/showthread.php?p=46767551
I have the same problem with a Metro PCS plan on an Alcatel One Touch Fierce XL, has anyone been able to make Mexico roaming function?
I just switched my verizon phone to straight talk. Im finding out one of the things thats saving me money is terrible customer support...
So I have an S5 SM-G900V running 4.4.2 unlocked.
So I switch to straight talk and everything is great. Same exact service as verizon for half the price. The next day I get a text that my data plan has been updated from 5 gb to 8 gb. They told me this would happen. Now when they switch my plan over they also reflashed my APN and broke my data/MMS. Get on the web google a little bit download a couple things and within an hour Ive got the APN properly working and data going just fine. Next day I try to send someone a picture via text and realize I cant receive or send MMS'. Get back on google tonight to configure the texting an APN settings and for the life of me I cant get it to work. Ive tried numerous old and new MMSC's proxies, ports, etc. I managed to get my downloading working but uploading refuses to play nice.
My APN reads as follows right now.
APN: TRACFONE.VZWENTP
MMSC: HTTP://MMS.VTEXT.COM/SERVLETS/MMS
MCC: 311
MNC: 480
APN TYPE: DEFAULT,DUN,STDHIPRI,SUPL
APN PROTOCOL: IPV4/IPV6
APN ROAMING PROTOCOL: IPV4/IPV6
BEARER: LTE
If I didnt listed the field is blank. So as a small note my wife has the same exact phone but with the next version of android and is having no issues. Her APN reads exactly the same except the MMSC is set to default, and the APN TYPE doesnt have STDHIPRI. I tried her settings not luck. Also the MMSC im currently on is not what worked for downloading so Im broken on up and download right now. I used an older tracfine address that got downloading working. This vtext address is what is listed as correct for a verizon phone everywhere on the web...
Also Id like to add I wanted to try some settings I found with different MCC and MNC numbers but if I change them it immediately deletes my APN profile...
I did also try go sms and some other recommended messaging apps and it made no difference.
Help please lol. Im getting super frustrated.
Well I just fixed it. Go figure I walk away from it for a couple hours, make a post, screw with it for 10 minutes and figure it out...
SO for anyone else on the internet with this issue here is the functioning current APN for a verizon phone on straight talk as of 8/2017
APN: TRACFONE.VZWENTP
MMSC: HTTP://MMS.VTEXT.COM/SERVLETS/MMS
MCC: 311
MNC: 480
APN TYPE: DEFAULT,MMS,SUPL
APN PROTOCOL: IPV4/IPV6
APN ROAMING PROTOCOL: IPV4/IPV6
BEARER: LTE
It was all in the stupid APN Type line. Apparently either my phones a screw ball OR perhaps newer android phones default better on certain settings that my rooted phone cant? Either way this stupid line changed worked to fix both my downloading and uploading...