Hello there
after i rooted my xperia p lt22i every thing goes will
then when i restarted my phone it hangs up in SONY illustrator light
i tried to flash it again using flashtool but it didnt work i tried to unroot the phone and it didnt work
now my phone is hanging up in that screen and doesnt want to go to home screen
help me please guys :crying:
How dod it not work flashing with flashtool?
ChikeD said:
How dod it not work flashing with flashtool?
Click to expand...
Click to collapse
11/016/2013 21:16:04 - INFO - Please connect your device into flashmode.
11/016/2013 21:16:52 - INFO - Device disconnected
11/017/2013 21:17:38 - INFO - Device connected in flash mode
11/017/2013 21:17:38 - INFO - Opening device for R/W
11/017/2013 21:17:38 - INFO - Start Flashing
11/017/2013 21:17:38 - INFO - Processing loader
11/017/2013 21:17:38 - INFO - Checking header
11/017/2013 21:17:38 - INFO - Ending flash session
11/017/2013 21:17:38 - ERROR -
11/017/2013 21:17:38 - ERROR - Error flashing. Aborted
11/017/2013 21:17:38 - INFO - Device connected in flash mode
do you know anything about that error why cant i flash my device again???
fares91.us said:
do you know anything about that error why cant i flash my device again???
Click to expand...
Click to collapse
I know you are not the only that had it. Could be bad FW file or drivers issue.
Have you flashed this file before?
What Windows version are you using?
ChikeD said:
I know you are not the only that had it. Could be bad FW file or drivers issue.
Have you flashed this file before?
What Windows version are you using?
Click to expand...
Click to collapse
yes it is clean official room i have used is before but now after rooting and hanged up on Sony logo i wanted to unroot and install this official room again now i cant use my phone i want help
thank you very much
fares91.us said:
yes it is clean official room i have used is before but now after rooting and hanged up on Sony logo i wanted to unroot and install this official room again now i cant use my phone i want help
thank you very much
Click to expand...
Click to collapse
Have you flashed it before with the same flashtool on the same PC?
ChikeD said:
Have you flashed it before with the same flashtool on the same PC?
Click to expand...
Click to collapse
same pc yes but another older version of flashtool is it important ??
fares91.us said:
same pc yes but another older version of flashtool is it important ??
Click to expand...
Click to collapse
Might be, make sure you run the binary compatible with you Windows.
Flashtool64(.exe) for 64-bit windows or Flashtool(.exe) for 32-bit windows.
Actually my devive is hanging on this screen so can i enter the flashmood while this screen is shown???
and should i use the same version of flashtool that i have used with the same room??
is the root effect the flashtool working ???
thank you very much
fares91.us said:
Actually my devive is hanging on this screen so can i enter the flashmood while this screen is shown???
and should i use the same version of flashtool that i have used with the same room??
is the root effect the flashtool working ???
thank you very much
Click to expand...
Click to collapse
Turn it off first, press power + volume up untill you feel 3 vibrations, then you can enter flash mode.
ChikeD said:
Turn it off first, press power + volume up untill you feel 3 vibrations, then you can enter flash mode.
Click to expand...
Click to collapse
thank you very much bro it worked the key of my problem was that feel 3 vibration to enter the flash mood :good:
any way thank you very much appreciate
fares91.us said:
thank you very much bro it worked the key of my problem was that feel 3 vibration to enter the flash mood :good:
any way thank you very much appreciate
Click to expand...
Click to collapse
But the log you posted showed you were in flash mode already.
ChikeD said:
But the log you posted showed you were in flash mode already.
Click to expand...
Click to collapse
actually i was trying to use the room without pressing the power + volume up and feel 3 vibrations after i do that i easily did the simple steps of flashtool
Related
I just flashed this through CWM in an unlocked-bootloader sola (as the thread suggested) and then after i pressed reboot from the CWM menu the phone stopped responding to anything!
screen, adb, fastboot, nothing working...
The only responses i can get from it are:
phone vibrates once when i press power+vol up
red led turns on when i plug in the usb cable
It won't even enter adb or fastboot, so i cant think of a way to fix this
Flash mode seems to appear working but when i try to flash anything through FlashTool it wont flash anything with an empty error message.
check the device's id at the device drivers log --> FlashTool "check device drivers" log: http://pastebin.com/xfM2PHQw
FlashTool "trying to flash relock bootloader" log: http://pastebin.com/wJHrF7BG
PC Companion recognizes the device as "Sony / Sony Erickson device"
SEUS shows the message for unlocked bootloaders (the one that says it contains modified software or something similar)
wrong section. but you must install drivers manually on device manager.
Try flashing stock firmware in flash mode
Sent from my LT22i using Tapatalk 2
wrong section. but you must install drivers manually on device manager.
Click to expand...
Click to collapse
Tried both in windows and linux (don't require drivers here), couldn't get it to recognize.
Try flashing stock firmware in flash mode
Click to expand...
Click to collapse
Already tried, this is the log:
09/032/2012 14:32:09 - INFO - (USBFlashWin32.java:18) - Opening device for R/W
09/032/2012 14:32:09 - INFO - (X10flash.java:408) - Reading device information
09/032/2012 14:32:30 - INFO - (X10flash.java:320) - Start Flashing
09/032/2012 14:32:30 - INFO - (X10flash.java:198) - Processing loader
09/032/2012 14:32:30 - INFO - (X10flash.java:167) - Checking header
09/032/2012 14:32:30 - INFO - (X10flash.java:365) - Ending flash session
09/032/2012 14:32:30 - ERROR - (X10flash.java:342) -
09/032/2012 14:32:30 - ERROR - (X10flash.java:343) - Error flashing. Aborted
09/032/2012 14:32:30 - INFO - (FlasherGUI.java:1020) - Device connected in flash mode
Click to expand...
Click to collapse
Varemenos said:
Tried both in windows and linux (don't require drivers here), couldn't get it to recognize.
Already tried, this is the log:
Click to expand...
Click to collapse
i had that problem with my xperia go once. when i turned it on it would show the Sony logo, then the Xperia logo and restart...
when i tried to flash a new ics rom(the stock one) via flash tool it had the same error, but i figured out you need to have PC companion opened when using flashtool.(at least that worked for me)
sarsarhos said:
wrong section. but you must install drivers manually on device manager.
Click to expand...
Click to collapse
techno-np said:
Try flashing stock firmware in flash mode
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
OverdiveKill said:
i had that problem with my xperia go once. when i turned it on it would show the Sony logo, then the Xperia logo and restart...
when i tried to flash a new ics rom(the stock one) via flash tool it had the same error, but i figured out you need to have PC companion opened when using flashtool.(at least that worked for me)
Click to expand...
Click to collapse
The problem is, my phone doesn't turn its screen on.
I can't tell whats going on, if its on or not (im being guided by led colors).
And i tried having pc companion on while using flashtool which didn't help
My friend sorry to say but you should read that post clearly before installing that rom this rom is for unlocked bootloader only.
May you have not checked bl status whether it is properly unlocked or not.
Or try to unlock bl again from flash tool and try to flash from again.
Sent from my MT27i using xda app-developers app
sorry,but is going to flashmode?
Regards,
G
rehan512 said:
My friend sorry to say but you should read that post clearly before installing that rom this rom is for unlocked bootloader only.
May you have not checked bl status whether it is properly unlocked or not.
Or try to unlock bl again from flash tool and try to flash from again.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
It was unlocked...
Also which was the section was i supposed to post it to?
GEKTHEBOSS said:
sorry,but is going to flashmode?
Regards,
G
Click to expand...
Click to collapse
i was able to get in flash mode yesterday (even though the driver name was odd) but today i can't get it to work.
Thread moved to Q & A section, post in the relevant section next time.
Please i need help with flashtool, i want to flash a custom kernel to my xperia neo, but anytime i try to do it i get an error in flashtool. what i dont understand is that i can use flashtool to flash ftf files but if i use the fastboot mode it also works good and i can also enter into fastboot via adb but if i click on select kernel to flash then it tells me that ,that action can only be done in fastboot mode. i have here how my log cat from flashtool. looks like please help because am a victim of the almigty 0%:crying::crying:
this is what i get when i try to flash kernel with flashtool
17/032/2012 01:32:55 - INFO - <- This level is successfully initialized
17/032/2012 01:32:56 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
17/032/2012 01:32:56 - INFO - You can drag and drop ftf files here to start flashing them
17/033/2012 01:33:12 - INFO - Device connected with USB debugging on
17/033/2012 01:33:12 - INFO - Connected device : MT15
17/033/2012 01:33:13 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
17/033/2012 01:33:13 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
17/033/2012 01:33:22 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
17/033/2012 01:33:22 - INFO - Device Status: ADB mode
17/033/2012 01:33:25 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
17/033/2012 01:33:26 - INFO - Device will soon enter fastboot mode
17/033/2012 01:33:29 - INFO - Device disconnected
17/033/2012 01:33:29 - INFO - Device connected in fastboot mode
17/033/2012 01:33:33 - INFO - Device Status: NOT FOUND
17/033/2012 01:33:59 - ERROR - This action can only be done in fastboot mode
17/034/2012 01:34:04 - ERROR - This action can only be done in fastboot mode.
First, use SEUS update companion to clear problems.
Then turn on usb debugging, unknown sources and enable connection to pc in MSC.
Connect phone, let it recognize, then turn it off, hold back button while connecting to to phone and the LED should go green.
Make sure you have the drivers installed too.
Tnx man will give it try
Sent from my GT-S5660 using xda premium
And also install drivers from flashtool..
Sent from my MT11i
Connect phone, let it recognize, then turn it off, hold back button while connecting to to phone and the LED should go green
Click to expand...
Click to collapse
Actually u should hold menu button and LED goes blue..for Fastboot mode..
Thank you all for the help. I done all that you Gus suggested but i still get the error . I lock the bootloader and use pc companion to repair the phone and now i cannot unlock the bootloader . Any help on that one too will be appropriated
Sent from my GT-S5660 using xda premium
myjoejoe said:
Thank you all for the help. I done all that you Gus suggested but i still get the error . I lock the bootloader and use pc companion to repair the phone and now i cannot unlock the bootloader . Any help on that one too will be appropriated
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Flash a stock firmware via flashtool
N unlock yur bl ,download a fastboot
Package install drivers n then
The kernel man
Gl
seNt froM My bustEr Neo v <3
Tnx. Can u help me to unlock the bootloader
Sent from my GT-S5660 using xda premium
myjoejoe said:
I lock the bootloader and use pc companion to repair the phone and now i cannot unlock the bootloader .
Click to expand...
Click to collapse
Why not?
myjoejoe said:
Tnx. Can u help me to unlock the bootloader
Click to expand...
Click to collapse
How you did it first time?
I can't root it. I have try all the root method but none of them work . That is why i cant unlock
Sent from my GT-S5660 using xda premium
myjoejoe said:
I can't root it. I have try all the root method but none of them work . That is why i cant unlock
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Root your phone and unlock your bootloader is not the same thing.
If you have root your phone,that doesnt mean you have unlock your Bootloader.
Root is what in your file system.while Bootloader related with the kernel.
For users with Locked Bootloader usually Root Phone and install REcovery(CWM).
For users with unlock BL...didnt need to root phone and didnt install CWM.Kernel is pre-rooted and built-in CWM.
Thank you very much. The problem is that i try to unlock the bootloader and it did not work .i also try to root it but it did not work too. So now i don't know what to do cuz if i unplug the phone from charge then if goes of cuz of the O% problem
Sent from my GT-S5660 using xda premium
So try unlock your BL first...either with official or unofficial way.
Why have 0% problem?this problem exist from old kernel...the latest kernel didnt have this problem.
Tnx man ,I have manage to get root now. But still can't install kernel. Cuz in flashtool when i boot to fastboot mode via adb, then when i click on select kernel to flash . I get error massage that this action can only be done in fastboot mode. Mean while the phone is connected in fastboot mode.
Sent from my GT-S5660 using xda premium
myjoejoe said:
Tnx man ,I have manage to get root now. But still can't install kernel. Cuz in flashtool when i boot to fastboot mode via adb, then when i click on select kernel to flash . I get error massage that this action can only be done in fastboot mode. Mean while the phone is connected in fastboot mode.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
You have to hold menu when you connect your phone .. Make sure that your kernel in fastboot folder
Sent from my MT11i
plzz help
guys i have flashed my phone , flashing fished then its showing phone will reboot , but phone is not rebooting and after that its showing device disconnected then device connected in flash mode then again device disconnected ,please solve this probleum...:crying::crying::crying:
john abrahim said:
guys i have flashed my phone , flashing fished then its showing phone will reboot , but phone is not rebooting and after that its showing device disconnected then device connected in flash mode then again device disconnected ,please solve this probleum...:crying::crying::crying:
Click to expand...
Click to collapse
Hey dude come on there is not a big issue.. If it says phone will reboot it won't you have to reboot manually..
Whent it says disconnected and again connected. Means the flashtool finished the process device will disconnect and reconect for another process..
When ever you try to flash anything from flashtool always do one process and disconect the phone and again make flashtool ready for another process then connect your phone.. You have to understand how to use flashtool first
Sent from my MT11i
Tnx man is just that am not good with this things am a noob who is learning from the forum .
Sent from my GT-S5660 using xda premium
Ysharief said:
Hey dude come on there is not a big issue.. If it says phone will reboot it won't you have to reboot manually..
Whent it says disconnected and again connected. Means the flashtool finished the process device will disconnect and reconect for another process..
When ever you try to flash anything from flashtool always do one process and disconect the phone and again make flashtool ready for another process then connect your phone.. You have to understand how to use flashtool first
Sent from my MT11i
Click to expand...
Click to collapse
my dear friend , i know how to switch on the phone , but the prob is , when i am clicking on the power botton green light is blinking , please help what to do.
john abrahim said:
my dear friend , i know how to switch on the phone , but the prob is , when i am clicking on the power botton green light is blinking , please help what to do.
Click to expand...
Click to collapse
Flash a stock firmware via flashtool
Its should work man
http://forum.xda-developers.com/showthread.php?t=1678690
Try the .587 nordic gl
seNt froM My bustEr Neo v
Hey,
I wanted to restore my backup but it didn't work and after rebooting my sola is now stuck in the sony Logo
I tried to flash the firmware, and the kernel but I always get the message:
22/040/2013 15:40:45 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0026";ERR_DYNAMIC="08 : TA flush failed";
It is Xperia Sola rooted Stock .54
Please help me :crying:
DatJoe said:
Hey,
I wanted to restore my backup but it didn't work and after rebooting my sola is now stuck in the sony Logo
I tried to flash the firmware, and the kernel but I always get the message:
22/040/2013 15:40:45 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0026";ERR_DYNAMIC="08 : TA flush failed";
It is Xperia Sola rooted Stock .54
Please help me :crying:
Click to expand...
Click to collapse
did you try to update the version of flashtoo to 0.9.11.0l?
Did you try to flash any custom kernel too?
How many threads will you open?? Try hard restart.. Check if all the drivers are installed n flash just official ftf..
DaRk-L0rD said:
did you try to update the version of flashtoo to 0.9.11.0l?
Did you try to flash any custom kernel too?
Click to expand...
Click to collapse
Okay, I'm downloading this version now, will report. No I didn't try any custom kernel, my BL is locked does it work anyway and may you give me a link if it would work?
rakz said:
How many threads will you open?? Try hard restart.. Check if all the drivers are installed n flash just official ftf..
Click to expand...
Click to collapse
I'm sorry, but this is another problem.What do you mean with "Hard restart" I restarted the phone already but always stuck in Sony logo and I installed all drivers before. Before this happened everything worked with the Flashtool and the Firmwares/Kernels I downloaded.
DatJoe said:
Okay, I'm downloading this version now, will report. No I didn't try any custom kernel, my BL is locked does it work anyway and may you give me a link if it would work?
Click to expand...
Click to collapse
Custom kernels are only for unlocked bootloader. I though you were on unlocked bootloader buddy.
Also, when you try to install a firmware via flashtool uncheck the option "final verification".
DaRk-L0rD said:
Custom kernels are only for unlocked bootloader. I though you were on unlocked bootloader buddy.
Also, when you try to install a firmware via flashtool uncheck the option "final verification".
Click to expand...
Click to collapse
Okay, I have a locked BL. I tried it with unchecking it, same issue...
Which ftf file are you using!?? check if it is for locked bootloader!! Press power and volume+ together and wait until it vibrates three times.. This is hard restart
rakz992 said:
Which ftf file are you using!?? check if it is for locked bootloader!! Press power and volume+ together and wait until it vibrates three times.. This is hard restart
Click to expand...
Click to collapse
I'm using MT27_6.1.1.B.1.54_CE I downloaded it here and it worked before. Yeah Hard reset works but I'm still stuck in sonys logo.
I updated Flashtool but same problem
Really guys I hope you still have suggestions (
Do you have .10 ftf?? Try flashing it once .n I have to ask does it go into bootloop or just stays on sony logo for all time?!
It must be some problem with your drivers on pc, if u can enter fastboot mode then u shouldnt have problem flashing...
Sent from my ST25i using Tapatalk 4 Beta
rakz992 said:
Do you have .10 ftf?? Try flashing it once .n I have to ask does it go into bootloop or just stays on sony logo for all time?!
Click to expand...
Click to collapse
No, I will download .10 ftf. No it just stays on the sony logo all the time.
It must be some problem with your drivers on pc, if u can enter fastboot mode then u shouldnt have problem flashing...
Sent from my ST25i using Tapatalk 4 Beta
Click to expand...
Click to collapse
This can be because sometimes flashtool asks me to install drivers and when I'm installing them then there is the error. I Can't enter fastboot because I ha ve a locked BL.
In your pc go to c/flashtool/drivers n install that exe.. And if you're mobile just stays on sony logo then let it stay there for sometime.. May be some error with TA partition
rakz992 said:
In your pc go to c/flashtool/drivers n install that exe.. And if you're mobile just stays on sony logo then let it stay there for sometime.. May be some error with TA partition
Click to expand...
Click to collapse
Yeah, I installed the drivers like 3 x times.
I re-installed the flashtool and downloaded another ftf here:
24/028/2013 13:28:06 - INFO - Selected MT27i / 6.1.1.B.1.10 / India
24/028/2013 13:28:06 - INFO - Preparing files for flashing
24/028/2013 13:28:26 - INFO - Please connect your device into flashmode.
24/037/2013 13:37:14 - INFO - Device connected in flash mode
24/037/2013 13:37:14 - INFO - Opening device for R/W
24/037/2013 13:37:14 - INFO - Reading device information
24/037/2013 13:37:14 - INFO - Phone ready for flashmode operations.
24/037/2013 13:37:15 - INFO - Current device : MT27i - BX903CFKEJ - 1261-7807_R1G - 1254-4241_6.1.1.B.1.54 - WORLD_6.1.1.B.1.54
24/037/2013 13:37:15 - INFO - Start Flashing
24/037/2013 13:37:15 - INFO - Processing loader
24/037/2013 13:37:15 - INFO - Checking header
24/037/2013 13:37:15 - INFO - Flashing data
24/037/2013 13:37:19 - INFO - Loader : S1_Root_3065 - Version : R5E003 / Bootloader status : ROOTABLE
24/037/2013 13:37:19 - INFO - Disabling final data verification check
24/037/2013 13:37:19 - INFO - Ending flash session
24/037/2013 13:37:19 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0026";ERR_DYNAMIC="08 : TA flush failed";
24/037/2013 13:37:19 - ERROR - Error flashing. Aborted
24/037/2013 13:37:19 - INFO - Device connected in flash mode
24/037/2013 13:37:20 - INFO - Device disconnected
Same problem...
Please I need your help! :crying:
Using that ftf.. Untick everything n just tick kernel.. N flash. If it's successful then try flashing the whole ftf
rakz992 said:
Using that ftf.. Untick everything n just tick kernel.. N flash. If it's successful then try flashing the whole ftf
Click to expand...
Click to collapse
It doesn't matter which ftf I'm flashing. I always get this error, but I'll try.
EDIT: Same Error....
DatJoe said:
Hey,
I wanted to restore my backup but it didn't work and after rebooting my sola is now stuck in the sony Logo
I tried to flash the firmware, and the kernel but I always get the message:
22/040/2013 15:40:45 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0026";ERR_DYNAMIC="08 : TA flush failed";
It is Xperia Sola rooted Stock .54
Please help me :crying:
Click to expand...
Click to collapse
D/L flashtool and D/L MT27_6.1.1.B.1.54_KERNEL.ftf. put that tft into >>C:\Flashtool\firmwares<< Then open flashtool and click on the lightning icon, Mode Selector pops up choose fflashmode, then chose the MT27_6.1.1.B.1.54_KERNEL.ftf. Switch off the phone,press the volume down button,keep it pressed and connect the usb cable.:cyclops:
if u get that error again make sure that your bootloader is unlocked if not then i suggest that you unlock it.
ibless said:
D/L flashtool and D/L MT27_6.1.1.B.1.54_KERNEL.ftf. put that tft into >>C:\Flashtool\firmwares<< Then open flashtool and click on the lightning icon, Mode Selector pops up choose fflashmode, then chose the MT27_6.1.1.B.1.54_KERNEL.ftf. Switch off the phone,press the volume down button,keep it pressed and connect the usb cable.:cyclops:
if u get that error again make sure that your bootloader is unlocked if not then i suggest that you unlock it.
Click to expand...
Click to collapse
Read the whole thread, and you'll see I still get the message.
If there isn't an other way to solve it, then I'll have to unlock it but is it possible when I can't use my phone?
DatJoe said:
Read the whole thread, and you'll see I still get the message.
If there isn't an other way to solve it, then I'll have to unlock it but is it possible when I can't use my phone?
Click to expand...
Click to collapse
You can try! n thanks was by mistake
DatJoe said:
Read the whole thread, and you'll see I still get the message.
If there isn't an other way to solve it, then I'll have to unlock it but is it possible when I can't use my phone?
Click to expand...
Click to collapse
Yes it is possible without having to start up your phone, and yes i read thread but take note on what i was refering to in detail i said MT27_6.1.1.B.1.54_KERNEL and not {{MT27_6.1.1.B.1.54_Global}}}. Either way just unlock your bootloader seeing as how u cant turn it on to get the imei their is another way with flashtool.
1) download and install latest Flashtool (Flashtool Version 0.9.11.0)
2) Start Flashtool and click on BLU button on the top its right next to the lightning rod
3) turn off your phone (Hold power button and volume up make sure it vibrates twice), connect phone to PC in flashmode(hold down volume down while connecting it to pc)
4) click on get unlock key button, it will switch you to Sony Mobile website, here complete all boxes
5) copy IMEI form Flashtool to Sony Mobile site, than you will get unlock code to your mailbox
6) copy unlock key to Flashtool window and than click unlock
7) connect phone in fastbootmode ( holding volume up while connecting it to pc)
8) wait to unlock finish.
you should now have unlocked bootloader. Then retry flashing the .54 i also say just flash .54_KERNEL and NOT .54_Global.
ibless said:
Yes it is possible without having to start up your phone, and yes i read thread but take note on what i was refering to in detail i said MT27_6.1.1.B.1.54_KERNEL and not {{MT27_6.1.1.B.1.54_Global}}}. Either way just unlock your bootloader seeing as how u cant turn it on to get the imei their is another way with flashtool.
1) download and install latest Flashtool (Flashtool Version 0.9.11.0)
2) Start Flashtool and click on BLU button on the top its right next to the lightning rod
3) turn off your phone (Hold power button and volume up make sure it vibrates twice), connect phone to PC in flashmode(hold down volume down while connecting it to pc)
4) click on get unlock key button, it will switch you to Sony Mobile website, here complete all boxes
5) copy IMEI form Flashtool to Sony Mobile site, than you will get unlock code to your mailbox
6) copy unlock key to Flashtool window and than click unlock
7) connect phone in fastbootmode ( holding volume up while connecting it to pc)
8) wait to unlock finish.
you should now have unlocked bootloader. Then retry flashing the .54 i also say just flash .54_KERNEL and NOT .54_Global.
Click to expand...
Click to collapse
Can I relock my phone and is the guarantee away?
what should i do unlocking the bootloader or sending the phone back to the shop? Would they take it ?
Hey guys,
first of all i need to state that i am an asshole. i used to flash kernels and stuff when i had LG optimus one, and i just assumed that flashing xperia p is almost the same. oh, i didn't know about bootloader. so, everything mentioned is totally my fault and i can't blame anyone but myself.
the situation is as follows: i install root, cwm, and then i flash sliding_xp kernel and MoonBreaker ROM just like manual says.
then, of course, my phone won't start - only vibration and nothing more.
OK, i google, and i find out that i need to flash stock kernel to save the phone.
OK, i install flashtool, and:
06/057/2013 23:57:27 - INFO - Device disconnected
06/057/2013 23:57:35 - INFO - Device connected in flash mode
06/057/2013 23:57:37 - INFO - Device disconnected
so i, like, have only two second to flash. i tried to do it and failed.
my PC runs win8 x64 and has no USB 2.0 ports, only 3.0.
i can't charge as well as it also disconnects after a couple of seconds. battery before flashing was about 60%.
any suggestions what can i do? i tend to try another PC, but i don't have any now.
@sciezka
Have you flashed with your PC before?
Jave you installed drivers from flashtool (specifically the 2 at the bottom of the list, fastboot & flasj mode)?
Try installing them following the steps in this post.if it doesn't work see the first post in that thread.
hath mvbnese
ChikeD said:
@sciezka
Have you flashed with your PC before?
Jave you installed drivers from flashtool (specifically the 2 at the bottom of the list, fastboot & flasj mode)?
Try installing them following the steps in this post.if it doesn't work see the first post in that thread.
Click to expand...
Click to collapse
actually i failed even to do repairs with PC Companion with similiar symptomes (green/purple light goes off after a couple of seconds), but i did this with another PC. that's why i tend to do it again.
btw, but DooMLoRD easy rooting toolkit worked fine on my PC, but i guess it uses different drivers.
i also tried to do steps from that post you mentioned, but x64 restricted this modification. all i get is error message.
sciezka said:
actually i failed even to do repairs with PC Companion with similiar symptomes (green/purple light goes off after a couple of seconds), but i did this with another PC. that's why i tend to do it again.
btw, but DooMLoRD easy rooting toolkit worked fine on my PC, but i guess it uses different drivers.
i also tried to do steps from that post you mentioned, but x64 restricted this modification. all i get is error message.
Click to expand...
Click to collapse
The rooting toolkit use adb device.
What you got error for the command lines or driver installation?
You need to run command line as administrator.
ChikeD said:
The rooting toolkit use adb device.
What you got error for the command lines or driver installation?
You need to run command line as administrator.
Click to expand...
Click to collapse
i run command line as administrator.
my win8 is russian one, so i'll give as accurate translation as i can:
error occured when setting element data.
value proctected by safe booting policy and can't be changed or deleted.
sciezka said:
i run command line as administrator.
my win8 is russian one, so i'll give as accurate translation as i can:
error occured when setting element data.
value proctected by safe booting policy and can't be changed or deleted.
Click to expand...
Click to collapse
See if this helps
http://www.youtube.com/watch?v=ElzvaL96cw0
ChikeD said:
See if this helps
http://www.youtube.com/watch?v=ElzvaL96cw0
Click to expand...
Click to collapse
unfortunately, nope. the same problem.
here's the log of when i try to flash:
07/024/2013 01:24:58 - INFO - Selected Xperia P LT22i_6.2.A.1.100_Middle East.ftf
07/024/2013 01:24:58 - INFO - Preparing files for flashing
07/024/2013 01:24:58 - INFO - Please connect your device into flashmode.
07/025/2013 01:25:06 - INFO - Device connected in flash mode
07/025/2013 01:25:06 - INFO - Opening device for R/W
07/025/2013 01:25:06 - INFO - Start Flashing
07/025/2013 01:25:06 - INFO - Processing loader
07/025/2013 01:25:06 - INFO - Checking header
07/025/2013 01:25:06 - INFO - Ending flash session
07/025/2013 01:25:06 - ERROR -
07/025/2013 01:25:06 - ERROR - Error flashing. Aborted
07/025/2013 01:25:07 - INFO - Device connected in flash mode
07/025/2013 01:25:07 - INFO - Device disconnected
sciezka said:
unfortunately, nope. the same problem.
here's the log of when i try to flash:
07/024/2013 01:24:58 - INFO - Selected Xperia P LT22i_6.2.A.1.100_Middle East.ftf
07/024/2013 01:24:58 - INFO - Preparing files for flashing
07/024/2013 01:24:58 - INFO - Please connect your device into flashmode.
07/025/2013 01:25:06 - INFO - Device connected in flash mode
07/025/2013 01:25:06 - INFO - Opening device for R/W
07/025/2013 01:25:06 - INFO - Start Flashing
07/025/2013 01:25:06 - INFO - Processing loader
07/025/2013 01:25:06 - INFO - Checking header
07/025/2013 01:25:06 - INFO - Ending flash session
07/025/2013 01:25:06 - ERROR -
07/025/2013 01:25:06 - ERROR - Error flashing. Aborted
07/025/2013 01:25:07 - INFO - Device connected in flash mode
07/025/2013 01:25:07 - INFO - Device disconnected
Click to expand...
Click to collapse
Don't even bother to flash untill you install the drivers and make sure flashmode stay on for ~45 seconds.
Did you install the drivers again in non safe boot ?
Is there a disable driver signing option in windows 8 boot menu? you can try that as well.
ChikeD said:
Don't even bother to flash untill you install the drivers and make sure flashmode stay on for ~45 seconds.
Did you install the drivers again in non safe boot ?
Click to expand...
Click to collapse
yup, i did. and i don't get any drivers errors here like i did on the other 2 PCs running win7 x64 i tried.
so, it's all just about drivers?
sciezka said:
yup, i did. and i don't get any drivers errors here like i did on the other 2 PCs running win7 x64 i tried.
so, it's all just about drivers?
Click to expand...
Click to collapse
Likely.
Device is shut off with force shutdown?
EDIT: do you mean with windows 7 in safe mode? Win7 don't have safe boot option.
ChikeD said:
Likely.
Device is shut off with force shutdown?
EDIT: do you mean with windows 7 in safe mode? Win7 don't have safe boot option.
Click to expand...
Click to collapse
it flashed via CWM like normal, one after another, and i rebooted after i was done with CWM menu.
but it didn't boot after.
i didn't get much time on XP because those are not my laptops, my rommates only lend me in for a couple of minutes to try quickly. i didn't went so deep like i did with my PC.
sciezka said:
it flashed via CWM like normal, one after another, and i rebooted after i was done with CWM menu.
but it didn't boot after.
i didn't get much time on XP because those are not my laptops, my rommates only lend me in for a couple of minutes to try quickly. i didn't went so deep like i did with my PC.
Click to expand...
Click to collapse
I meant force shut down, hold power + volume up for about 10-15 seconds untill you feel 3 vibrations, then try flash mode and fastboot mode.
Don't flash anything just leave flashtool open to see if they are on for more than few seconds.
ChikeD said:
I meant force shut down, hold power + volume up for about 10-15 seconds untill you feel 3 vibrations, then try flash mode and fastboot mode.
Don't flash anything just leave flashtool open to see if they are on for more than few seconds.
Click to expand...
Click to collapse
OH. MY. GOD.
so simple.
in the other tread someone said it won't help. i'm more of a moron now.
thank you. you are my hero today.
sciezka said:
OH. MY. GOD.
so simple.
in the other tread someone said it won't help. i'm more of a moron now.
thank you. you are my hero today.
Click to expand...
Click to collapse
It's difficult to tell a boot loop that ends before the logo come on from driver problem, but worth checking the device is off.
ChikeD said:
It's difficult to tell a boot loop that ends before the logo come on from driver problem, but worth checking the device is off.
Click to expand...
Click to collapse
actually while your advice was great, it appears that the other thing i did made the difference since after i reverted it i couldn't connect anymore.
my laptop has only usb 3.0 ports, but you can fix the way they work (i'm not a specialist, but i say what i understood).
in BIOS you cand find USB settings. there you need to switch off xhci and switch on ehci. that allows to connect like i need. maybe this could be helpful for someone else.
[Q] Need Help! Xperia U Flashing Stock ICS Firmware Problem..
After Some Time, I Find Its Quite Hard To Live With A Buggy Phone.. So I Decided To Go Back To The Stock Firmware Using Flashtool..
The Problem Starts Here..
I Tried To Flash The Stock Ftf For st25i With Exclude Baseband Checked, But When I Connect My Phone In Flash Mode It Gives Me This Error :
23/000/2013 12:00:24 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
23/000/2013 12:00:29 - INFO - Device disconnected
23/000/2013 12:00:37 - INFO - Selected ST25i / 6.1.1.B.1.100 / Sony
23/000/2013 12:00:37 - INFO - Preparing files for flashing
23/001/2013 12:01:12 - INFO - Please connect your device into flashmode.
23/001/2013 12:01:16 - INFO - Device connected in flash mode
23/001/2013 12:01:17 - INFO - Opening device for R/W
23/001/2013 12:01:17 - INFO - Start Flashing
23/001/2013 12:01:17 - INFO - Processing loader.sin
23/001/2013 12:01:17 - INFO - Checking header
23/001/2013 12:01:17 - INFO - Ending flash session
23/001/2013 12:01:17 - ERROR -
23/001/2013 12:01:17 - ERROR - Error flashing. Aborted
23/001/2013 12:01:17 - INFO - Device connected in flash mode
23/001/2013 12:01:25 - INFO - Device disconnected
Should I Uncheck The Baseband Or Something I Had Missed Before Flashing It?
Btw Im Running XNovathor 4.1.2 V5 Currently..
Any Help Would Be Appreciated..
@TJam12
It may be corruped firmware file, connect your phone in flashmode while flashtool window is open, if it stays connected for about 45 seconds it's not drivers problem.
Why not use SUS or PCC to flash stock?
I Could But I Need To Relock The Bootloader By Flashing The Relock Ftf.. But Its Gives Me The Same Error As This One..
Btw, It Only Stays For 10 Seconds, Is It A Drivers Problem? But Flashtool Detected It Though..
TJam12 said:
I Could But I Need To Relock The Bootloader By Flashing The Relock Ftf.. But Its Gives Me The Same Error As This One..
Btw, It Only Stays For 10 Seconds, Is It A Drivers Problem? But Flashtool Detected It Though..
Click to expand...
Click to collapse
Might be drivers, what windows version is it?
What about fastboot how long can it stay connected?
ChikeD said:
Might be drivers, what windows version is it?
What about fastboot how long can it stay connected?
Click to expand...
Click to collapse
At Least Its Longer Than Flashmode Ones, Its Over 1 Minute And Still Not Disconnected.. Maybe Can Reach Over 4 Minutes..
Im On Windows 8 Pro..
TJam12 said:
At Least Its Longer Than Flashmode Ones, Its Over 1 Minute And Still Not Disconnected.. Maybe Can Reach Over 4 Minutes..
Im On Windows 8 Pro..
Click to expand...
Click to collapse
Fot my understanding you can flash with fastboot, at least system and kernel, and maybe the rest you'd be able to flash with flashtool as they are small.
ChikeD said:
Fot my understanding you can flash with fastboot, at least system and kernel, and maybe the rest you'd be able to flash with flashtool as they are small.
Click to expand...
Click to collapse
Any Idea How To Flash The Stock ICS Using Fastboot?
TJam12 said:
Any Idea How To Flash The Stock ICS Using Fastboot?
Click to expand...
Click to collapse
Just as flashing the kernel
fastboot flash boot kernel.sin
fastboot flash system system.sin
Not sure how safe this is if you cannot flash the others.
The others I don't know but maybe you will be able to flash them with flashtool
There is the partition image that may need to be flashed first.
Maybe it's better to find a computer that flashtool would work on.
TJam12 said:
After Some Time, I Find Its Quite Hard To Live With A Buggy Phone.. So I Decided To Go Back To The Stock Firmware Using Flashtool..
The Problem Starts Here..
I Tried To Flash The Stock Ftf For st25i With Exclude Baseband Checked, But When I Connect My Phone In Flash Mode It Gives Me This Error :
23/000/2013 12:00:24 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
23/000/2013 12:00:29 - INFO - Device disconnected
23/000/2013 12:00:37 - INFO - Selected ST25i / 6.1.1.B.1.100 / Sony
23/000/2013 12:00:37 - INFO - Preparing files for flashing
23/001/2013 12:01:12 - INFO - Please connect your device into flashmode.
23/001/2013 12:01:16 - INFO - Device connected in flash mode
23/001/2013 12:01:17 - INFO - Opening device for R/W
23/001/2013 12:01:17 - INFO - Start Flashing
23/001/2013 12:01:17 - INFO - Processing loader.sin
23/001/2013 12:01:17 - INFO - Checking header
23/001/2013 12:01:17 - INFO - Ending flash session
23/001/2013 12:01:17 - ERROR -
23/001/2013 12:01:17 - ERROR - Error flashing. Aborted
23/001/2013 12:01:17 - INFO - Device connected in flash mode
23/001/2013 12:01:25 - INFO - Device disconnected
Should I Uncheck The Baseband Or Something I Had Missed Before Flashing It?
Btw Im Running XNovathor 4.1.2 V5 Currently..
Any Help Would Be Appreciated..
Click to expand...
Click to collapse
I Think Its Common Problem , Bcz I Too Faced This !!
Easy To Solve Dis : Just Try 3-4 Times By Flashtool When Yu Get *Error Flashing. Aborted* Just Unplug Yur Device Nd Close D Flashtool & Try Again By Opening Flashtool Nd Select Yur Firmware .. !
ChikeD said:
Just as flashing the kernel
fastboot flash boot kernel.sin
fastboot flash system system.sin
Not sure how safe this is if you cannot flash the others.
The others I don't know but maybe you will be able to flash them with flashtool
There is the partition image that may need to be flashed first.
Maybe it's better to find a computer that flashtool would work on.
Click to expand...
Click to collapse
Btw, I Flashed This Firmware Before And It Was A Success.. Now Im Doing The Same As Wht I Do Before, But It Gives Me Error.. Maybe Theres Something I Did Tht Makes This Error? Will Formating The /System,/Data And /Cache Could Result In This?
TJam12 said:
Btw, I Flashed This Firmware Before And It Was A Success.. Now Im Doing The Same As Wht I Do Before, But It Gives Me Error.. Maybe Theres Something I Did Tht Makes This Error? Will Formating The /System,/Data And /Cache Could Result In This?
Click to expand...
Click to collapse
You said flash mode disconnects after 10 seconds, normally it is 45 seconds, that could be a problem or with the file.
Try reloading the firmware file or even better, build ne from PCC files.
Start repair with PCC untill it ask you to connect in flash mode, the build FTF .
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Haha, No Need.. I Solved It Already..
Apparently Its Because Of The "Holding Down Volume Button" Thing..
If U Just Connect The Phone While Its Powered Off Without Holding Anything It Works.. Anyway, Thx For Helping..
TJam12 said:
Haha, No Need.. I Solved It Already..
Apparently Its Because Of The "Holding Down Volume Button" Thing..
If U Just Connect The Phone While Its Powered Off Without Holding Anything It Works.. Anyway, Thx For Helping..
Click to expand...
Click to collapse
That's ultra weird, gotta hold down the volume down, but not forever.
You say it flashed without holding it down at all,?
ChikeD said:
That's ultra weird, gotta hold down the volume down, but not forever.
You say it flashed without holding it down at all,?
Click to expand...
Click to collapse
Yup.. I Actually Forgot To Hold And Continue Connecting It, Then It Goes To Flash Mode And Bam! The Error Is Gone..