my galaxy s3 keeps freezing after i flashed omega aokp v8.1 milestone 2 can anyone help please???
Kingfish907 said:
my galaxy s3 keeps freezing after i flashed omega aokp v8.1 milestone 2 can anyone help please???
Click to expand...
Click to collapse
Do you have a proper wipe in recovery ?? If not then do a complete wipe and again flash the ROM if problem reman then change the ROM the problem might be in your ROM your flashing
sent from my HTC ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup: development
thanks button not harms your fingers while clicking
Did a full wipe and reflashed it but its still doing the same.
It work fine on my old galaxy s3 but I lost it and had to get a new one, now it won't work
Sent from my GT-I9300 using xda app-developers app
Kingfish907 said:
Did a full wipe and reflashed it but its still doing the same.
It work fine on my old galaxy s3 but I lost it and had to get a new one, now it won't work
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Then change the ROM simple
sent from my HTC explorer having ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup: development
thanks button not harms your fingers while clicking
Don't understand how it won't work, when it worked on my old Samsung galaxy s3
Sent from my GT-I9300 using xda app-developers app
Kingfish907 said:
Don't understand how it won't work, when it worked on my old Samsung galaxy s3
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmm. Try redownloading the ROM from other place you can Google it and also while downloading and transferring file to the phone may also occur the problem like that.
sent from my HTC explorer
ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup: development
thanks button not harms your fingers while clicking
Ok I'll try downloading it straight to my phone see if that work, if not I'll try a different rom.
Sent from my GT-I9300 using xda app-developers app
Kingfish907 said:
Ok I'll try downloading it straight to my phone see if that work, if not I'll try a different rom.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Good luck my friend
sent from my HTC explorer
ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup: development
thanks button not harms your fingers while clicking
Cheers
Another thing that keeps happening it is, when I put it in to sleep mode by locking the screen, it just stays black and won't unlock so I have to reboot it
Sent from my GT-I9300 using xda app-developers app
If you have read the basic faqs and guides and in particular the Freezing thread then your next step is a service centre .
jje
JJEgan said:
If you have read the basic faqs and guides and in particular the Freezing thread then your next step is a service centre .
jje
Click to expand...
Click to collapse
throw the stock rom back on there and see if you have the same prob,if you do may be hdwr,if you dont then its software,at least you will narrow it down and know what direction you need to go.
Kingfish907 said:
Cheers
Another thing that keeps happening it is, when I put it in to sleep mode by locking the screen, it just stays black and won't unlock so I have to reboot it
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Flash cwm latest version Change your ROM as I told you It defiantly solve the prob . If the problem. Remains
.... After doing all and nothing happens and you can't find something then go to service center :thumbup:
sent from my HTC explorer
ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup: development
thanks button not harms your fingers while clicking
I've done all that and put slimbean 8 on, it keeps freezing but not has much. Think it will have to go back to the service centre
Sent from my GT-I9300 using xda app-developers app
Related
Hey folks. I'm having problems with not getting the setup welcome screen on factory reset. I have flashed countless roms over the past few weeks and never had a problem. It's ok when I flash custom roms but when I come to flash official rom on my sgs2 there's no welcome screen just goes straight to main screen. Please advise.
One more point us that this doesn't happen when I flash gingerbread official.
Sent from my GT-I9100 using xda premium
Please note that I am running ics official from 3uk
Sent from my GT-I9100 using xda premium
Dial *2767*3855#
And it will come
atifsh said:
Dial *2767*3855#
And it will come
Click to expand...
Click to collapse
Thanks but that just reset my phone and formatted my sd cards. Still no sign of the welcome setup screen just boots and goes into main screen.
Still an issue
Try flashing a firmware with its stock rom..
Sent from my GT-I9100 using xda premium
Done that too. It only comes up when I load a custom rom, never official stock rom apart from official gingerbread. Bizarre I know
Sent from my GT-I9100 using xda premium
Bizarre it is,
Using cwm format cache system data preboot
Wipe dalvik
Download stock ROM flash using Odin.
If still issues I'll be going crazy lol
Arrrgh the problem still persists. I'm beginning to wonder if this has something to do with the root directory.
Knightmare
Sent from my GT-I9100 using xda premium
Why is this so important?
Sent from my GT-I9100 using xda premium
It's not overly important but it's bugging me. I generally know my way round Android but this has really stumped me. It's bothersome.
Sent from my GT-I9100 using xda premium
The welcome-screen-intro-thingy is part of the Google apps package - if Google apps aren't installed you wont get it. Are Gapps installed on your rom? If yes, try re-installing them.
They are, I'm running stock but have rooted and installed them to check if I was missing something.
Sadly nothing solved. I'm giving up on this now.
Sent from my GT-I9100 using xda premium
Hello,
I just got my GS3 and immediately flashed Task650 latest release (I am using his ROM for my Gtab for almost a year now, and I love it).
My question is, I really liked the Samsung camera app, however, when I try to install the apk from the stock Rom it just fails to install, any ideas?
BTW, I tried copying it to system/app and revolt the phone, no luck also.
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So you would be yet another lost soul judged by your
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
This is the International I9300 forum please read the sticky at the top of the page .
jje
Sorry, my bad, I re-posted the question in the right thread.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hi Guys
I'm having issues with my camera on the Unlocked international GT-N7000.
I'm running ICS 4.0.4 and I flashed it using odin.
It says "camera failed" and sometimes "running media scan" and then crashes. Any ideas on how to fix this?
Sent from my GT-N7000 using xda app-developers app
LordVaderXIII said:
Hi Guys
I'm having issues with my camera on the Unlocked international GT-N7000.
I'm running ICS 4.0.4 and I flashed it using odin.
It says "camera failed" and sometimes "running media scan" and then crashes. Any ideas on how to fix this?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
is the rom ure using an official version?
cus on many ics custom roms or ported roms the camera does not work and due kernel issues u might get problems with the media scan as u statet
so try a samsung stock ics firmware i guess its available for the note
Yeah it is the German official ROM. I'm going to re flash the rom as it gave me an issue on the first flash. I hope that works.
Sent from my GT-N7000 using xda app-developers app
Well that didn't work. I'm also noticing a few crashes here and there and reboots. Any idea why?
Sent from my GT-N7000 using xda app-developers app
LordVaderXIII said:
Well that didn't work. I'm also noticing a few crashes here and there and reboots. Any idea why?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
which method did u use to flash the rom?
where did u got it?
check out this page (if you dont already know it) http://www.sammobile.com/firmware/
its the first place to search for samsung stock roms
I used odin to flash it.
Usually get my roms from Samsung-updates.com
I'll have a look there thank you.
Sent from my GT-N7000 using xda app-developers app
Thanks Jiffer. I found the South African ICS rom on there. (It was only released yesterday) All seems to be well. Everything is now working. Thanks for the help.
Sent from my GT-N7000 using xda app-developers app
I have been encountering flickering problem while unlocking and locking.everything is stock bought it 3 days ago is it a software issue or a hardware issue?? Reply asap
Sent from my GT-I9300 using xda app-developers app
noufel said:
I have been encountering flickering problem while unlocking and locking.everything is stock bought it 3 days ago is it a software issue or a hardware issue?? Reply asap
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Try rebooting the phone at first, if that did not help do a data factory reset. After that if not solved you might reflash a stock rom. Still no remedy, take it to the shop/repair center.
noufel said:
I have been encountering flickering problem while unlocking and locking.everything is stock bought it 3 days ago is it a software issue or a hardware issue?? Reply asap
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Turn off power saving mode, you don't need to root the s3 it's perfect the way it is.
Sent from my GT-I9300 using xda app-developers app
buge boyo said:
Turn off power saving mode, you don't need to root the s3 it's perfect the way it is.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Am I missing something here? At what point did they even mention rooting the phone? And rooting is still the best way of disabling bandwidth hungry ads in apps.
gee2012 said:
Try rebooting the phone at first, if that did not help do a data factory reset. After that if not solved you might reflash a stock rom. Still no remedy, take it to the shop/repair center.
Click to expand...
Click to collapse
How can I reflash a stock rom?
Sent from my HTC Vision using xda app-developers app
noufel said:
How can I reflash a stock rom?
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
Dude, use the search,...
Please do not start again such Thread like "How can I flash"
There are a lot of Tutorials. Just try the search.
And please pick a more appropriate title next time.
noufel said:
How can I reflash a stock rom?
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
See my signature item 3 :silly:
noufel said:
I have been encountering flickering problem while unlocking and locking.everything is stock bought it 3 days ago is it a software issue or a hardware issue?? Reply asap
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
What type of flickering? This may sound stupid, but it is a legit question. Try making a photo of it.
If it is going downwards in bar-like formation, it's the display.
If it is blinking, it is Android, or a loose connection...
Today I installed the ROM Android revolution HD version 22.4. The ROM is very good but I have a problem.
When I try to move an application from the drawer to the home screen than the TouchWiz freezing and the stop working.
What I have to do?
Ask in the rom thread. More likely to get help
Sent from my GT-I9300 using xda premium
xcly said:
Ask in the rom thread. More likely to get help
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I can't ask there because I don't have 10 posts...
They have a QnA thread too.
Sent from my GT-I9300 using xda premium
Or1994 said:
Today I installed the ROM Android revolution HD version 22.4. The ROM is very good but I have a problem.
When I try to move an application from the drawer to the home screen than the TouchWiz freezing and the stop working.
What I have to do?
Click to expand...
Click to collapse
For issues like that, Mike recommends checking if the MD5 matches the given values and reflash the ROM with the correct MD5 to fix it.