Hello ! I'm new here and apparently I can't find the right section for my thread, I hope this is the right one, if not I'm very sorry.
I have a Jiayu G3 that won't boot in Android and apparently not in CWM either. I kinda did a lot of "upgrades" so please bare with me , here it goes (I just wanted to upgrade it to Jelly Bean).
I originally had 4.0.3 (stock/unrooted) then I rooted it using Binr4y's root method. Then I "installed Jelly Bean" from this video and then it started a boot loop then went on and on so I tried another rom and found this one RAW MOD B3, this one didn't worked either still looped on and on, so I tried finding a fix and came up with this Lewa Recovery 2.0 for JIAYU G3 so I flashed Lewa Recovery image with CWM and now to my surprise I can't even boot to CWM anymore.
I also installed before the Lewa Recovery Flash, White Google Logo.
So now my situation is kinda like this:
- I should have RAW MOD B3.
- I can't boot into Android it loops on and on at the logo.
- I can't boot into CWM either it also loops on and on.
- I don't really know how to boot into TWRP or Lewa.
Any help small as it is, is very much appreciated. Thank you for taking your time and reading about my problem and once again sorry if I have posted in the wrong section.
Solved
I fixed my phone, I went to some people who repair android phones it cost me 20$ (not much), they said that the USB method wasn't working so they tried with a device called BOX from Samsung who apparently rewrites the rom. It works as in the first day, also I don't see any screws being used to I think they didn't need to acces the mainboard, but I could be wrong.
Related
At work I just got a 100 galaxy tab's 10.1 (GT-p7510)
and I have to flash them al..
so I put the clockworkmod on it right away..
but I got a weird screen problem (as visible in the video)
the android os was still working normally, but once I put a custom rom on it android also started acting up in much the same way.. (as also visible in the video)
So here's a video of, loading into clockwordmod, then restarting into android
youtube.com/watch?v=nLZGwGeSke4
I tried putting the stock recovery tool back.. but still the same problem..
I'm out of ideas....
anyone?
http://forum.xda-developers.com/showthread.php?t=1555984
I didn't see that post.. thank you, I'll try that right away
Thank you
I ended up using the clockwork mod from here droidbasement.com/db-blog/?p=2487
and I replaced the boot .img in the rom with one from forums.acsyndicate.net/showthread.php?2122-GUIDE-ACS-How-To-Root-Unroot-The-Samsung-Galaxy-Tab-10-1-USA-Retail-WiFi-Only&p=10788#post10788
(the blue download link)
hello i recently purchased this tablet ahappydeal.com/product-160586.html
but i made the mistake of installing chainfire 3d clicked install driver and now
it wont boot it just goes to a white scree witth oem powered by and does not go any further
i know you can flash the stock rom back onto it but i have googled forumed youtubed
everything i juust cannot find one so i'm hoping you guys can help me out i am desperate at the moment
also if you know of any custom roms or where i might get the stock rom perhaps
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
hi guys
really could do with some help
i had flashed my u8850 when i first got my phone and played around with the custom roms which were not fully usable at the time. As my wife wanted the phone I flashed it to stock rom .. proper stock without root or CWM... with SUT l3 tool
now she gave it back to me as she upgraded, and i went to do a factory reset to clear out the contacts etc.. and start afresh.
it went and got stuck at the huawei symbol and hasn't gone off since.
since researching this, i found out that its a boot loop and anyone who has flashed a custom rom can never do a factory reset from the settings menu, but must do it in CWM instead.
so, Im stuck in a boot loop, with a original rom with no CWM and although the computer recognizes the phone as a huawei and loads the ADB drivers etc... Ive got no way to flash a rom with CWM to get me to cyanogen at all.. SUT doesn't recognize the phone at all..
so ive got the roms i need and even tried with android AIO flasher ...
clearly i need some help ...
can you assist?.. thanks..
The same problem
I got the same problem... I "played" with the ROM Toolbox app (changed boot animation, changed status bar icons, changed the SYSTEM UI), and now I got the same problem... Can anyone help us plz.?