Hey guys i used the one click Odin for the Verizon S4, and it gives me an error. phone will only boot into download mode
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sbl1.mbn
<ID:0/022> sbl2.mbn
<ID:0/022> sbl3.mbn
<ID:0/022> rpm.mbn
<ID:0/022> aboot.mbn
<ID:0/022>
<ID:0/022>
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone know whats going on?
thanks
I would try another cord or USB port. If you're on a desktop, try one in the back.
eric303 said:
Hey guys i used the one click Odin for the Verizon S4, and it gives me an error. phone will only boot into download mode
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sbl1.mbn
<ID:0/022> sbl2.mbn
<ID:0/022> sbl3.mbn
<ID:0/022> rpm.mbn
<ID:0/022> aboot.mbn
<ID:0/022>
<ID:0/022>
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone know whats going on?
thanks
Click to expand...
Click to collapse
It sounds like your on me7 and attempted to flash a custom recovery which you cant do. By the error log I can tell your on me7 and trying to flash mdk which you also cant do, or anything prior. Youll have to flash the stock me7 file to get back stock recovery.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
hexitnow said:
It sounds like your on me7 and attempted to flash a custom recovery which you cant do. By the error log I can tell your on me7 and trying to flash mdk which you also cant do, or anything prior. Youll have to flash the stock me7 file to get back stock recovery.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Click to expand...
Click to collapse
thanks, but i'm not trying to flash a custom recovery, i'm just trying to flash the stock image back on. I'll look for a stock me7 file and see what happens and report back.
I Tried the ME7 file like you suggested, still same thing
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thats a different error. Could of been a corrupted download. Might have to download it again, after its done I would verify the md5 to make sure you got a good download.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Related
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Assuming you cant get into CWM or anything?
CdTDroiD said:
Assuming you cant get into CWM or anything?
Click to expand...
Click to collapse
That's correct sir.
But I can hear it connecting/reconnecting if I toggle it.
Is this a complete irreversible hard brick?
I don't think so...
I don't think so.... try to flash with heimdall!!!
or
Send to samsung.... a month ago i sent my GT-P1000 (galaxy tab) completely bricked (it doesn't power on!!!!!) in 2 weeks they have sent me a new one!!
Just Try !!!!
Cheers Cascio97
Mushinronjya said:
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Click to expand...
Click to collapse
hard bricked, you have to use riffbox
Hi,
I tried to flash my Verizon Galaxy S4 but odin failed; I followed this guide, since I do not want to erase my pics.
http://forum.xda-developers.com/showthread.php?t=2301259
I couldn't check my build, so I tried all three factory images (VRUAMDK, VRUAME7,VRUDMI1)
I searched this forum and tried to change computer, cable, and usb port, but I still cannot flash.
Please help me to solve this problem.
FYI, here goes odin message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
newbie)Jay said:
Hi,
I tried to flash my Verizon Galaxy S4 but odin failed; I do not want to erase my pics, so I followed this guide.
http://forum.xda-developers.com/showthread.php?t=2301259
I couldn't check my build, so I tried all three factory images (VRUAMDK, VRUAME7,VRUDMI1)
I searched this forum and tried to change computer, cable, and usb port, but I still cannot flash.
Please help me to solve this problem.
FYI, here goes odin message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You probably need MK2: http://forum.xda-developers.com/showthread.php?t=2578209
Let me try
Oishikatta said:
You probably need MK2: http://forum.xda-developers.com/showthread.php?t=2578209
Click to expand...
Click to collapse
It worked!!! Thank you very much
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
falconflyer82 said:
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
Click to expand...
Click to collapse
Download stock rom from Sammobile and flash in Odin..
tallman43 said:
Download stock rom from Sammobile and flash in Odin..
Click to expand...
Click to collapse
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
falconflyer82 said:
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
tallman43 said:
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
Click to expand...
Click to collapse
I tried the rescue firmware, similar result:
Code:
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
P. S. I read somewhere in case of dead emmc I shouldn't be able to see the device version in download mode. But I can..
bricked device i9300..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
falconflyer82 said:
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
Click to expand...
Click to collapse
I used the 3.09 still same problem am stuked up really
If the rescue firmware and pit didn't flash then your emmc chip is damaged, either new motherboard or phone.
Sent from my GT-I9300 using Tapatalk
falconflyer82 said:
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
Click to expand...
Click to collapse
There must be a way to reset the download count by installing stock recovery. Maybe @Chainfire can help here.
Sent from my XT1033 using Tapatalk
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
what @boomboomer said is what you should consider.
If you keep on insisting, you will just damage the phone more ( i am talking from experience ) .
change motherboard or in some places, people can replace the emmc Chip for you.
Salam
Mot sure what specs i need to list here. i have the sch-i545, 4.3 and MJ7.
Im trying to use odin to flash stock but i keep getting this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried another .tar and im now getting the firmware upgrade encountered an issue. please select recovery in kies & try again.
I am completely lost and activating my old droidx till this can be fixed.
Denots said:
Mot sure what specs i need to list here. i have the sch-i545, 4.3 and MJ7.
Im trying to use odin to flash stock but i keep getting this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried another .tar and im now getting the firmware upgrade encountered an issue. please select recovery in kies & try again.
I am completely lost and activating my old droidx till this can be fixed.
Click to expand...
Click to collapse
You're using an MDK Odin tar...you need to use an MJ7 Odin tar instead.
Sent from my SCH-I545 using XDA Premium 4 mobile app
I found this file
N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5
looks like same error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So where do i go from here?
Denots said:
I found this file
N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5
looks like same error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUBMJ7_N900VVZWMJ7_N900VVRUBMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So where do i go from here?
Click to expand...
Click to collapse
Thats for the note 3. Here download this
I tried odin a few times on all of the tar's i have and continued to get the "succeed0/fail1" error but now i can boot up the phone to how i was before the "firmware upgrade error"
Waiting for the file you linked to finish downloading then giving it a try.
UPDATE
The file you linked worked, back on stock now time to get to rooting.
Denots said:
I tried odin a few times on all of the tar's i have and continued to get the "succeed0/fail1" error but now i can boot up the phone to how i was before the "firmware upgrade error"
Waiting for the file you linked to finish downloading then giving it a try.
UPDATE
The file you linked worked, back on stock now time to get to rooting.
Click to expand...
Click to collapse
You're welcome.
Sent from my SCH-I545 using XDA Premium 4 mobile app
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
husamba said:
hi guys,
my phone is soft-bricked and it freezes samsung logo screen on the startup.
How can I enable usb debugging mode on this situation ? Do you have any solution ??
My phone is: Samsung Galaxy S3 GT-I9300 International..
Click to expand...
Click to collapse
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
DejVidKo said:
There is no way how to enable USB debugging mode if is device soft bricked.. Download official FW ,then go to download/bootloader mode and flash it via Odin.
Click to expand...
Click to collapse
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
husamba said:
Hi DejVidKo,
I just get official FW from sammobile, I went to download mode and I am getting an error like below on ODIN. Do you have any guess about what I am doing wrong.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you have another version of Odin,try Odin v3.04
DejVidKo said:
If you have another version of Odin,try Odin v3.04
Click to expand...
Click to collapse
No wayyy. I tried it too. And I am getting same error. There are more than one rom in sammobile. May I download the wrong rom from sammobile.. :S
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)