Hi everyone.
I broke the front glass on my i9300, but managed to separate it from the LCD without damaging the screen. I have the glass replacement already, but i'd also like to take the opportunity and replace the housing on the phone, since because of it's ****ty quality the paint came out in lots of places.
I've found this for sale:
http://www.ebay.co.uk/itm/LCD-Frame...K_Replacement_Parts_Tools&hash=item2582c6dab1
I've seen a bunch of disassemble instructions for the i9300, but none of it shows how can you "pop-out" the LCD from the frame. Anyone has any idea on how to do it?
Lemme answer my own question:
You can't do it without breaking the display.
Oh well, there goes 100 quid. At least i'll get a new frame.
Sure? I know the glass breaks when removing it from the middle plate but the amoled display? which leads to the question - how do they get it in in the first place?
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
sorry for bringing this thread up but is this info that i9300 cant be fully dismantled (from old housing) true? I've bought one s3 really cheap with broken glass and really scratched paint all over the buttons and case and I'm willing to replace full housing because I have to replace glass so why not to replace it all
also if it is not possible to replace whole housing and glass, why d hell to they sell it as replacement parts?
Related
Hi there!
I didn't put a screen protector on my TD2 -and over time it has become more scratched than expected. I'd like to replace the front display -I guess that is the one called the digitizer, or?
http://cgi.ebay.com/Touch-Screen-Di...wItemQQptZPDA_Accessories?hash=item4837633bd0
What are the chances for getting an original HTC at ebay?
Did anybody do this replacement with success?
Cheers
No one?
check this out too!!!
more expensive and not a word about oem product!!!
So... oem digitizer with just 19$ .... hmmmm! don't know!!!!
Perhaps this guide can help you.
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Hopefully not.. But I think it's only glued to the frame.. I don't really know what kind of glue to use for the new one though...
ren28 said:
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Click to expand...
Click to collapse
Sorry to tell you all that the Digitizer is permanently attached with LCD. I know this because I was drop my D2 and went to service center. They change to front cover (case) which was broken when droped. when I get it back they give me back my old front cover and I notice that the digitizer is stick with over part.....
When I ask the service's counter. They told me that they have to change the new digitizer because it come with whole part.. not saparated.
Sorry for my english....
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
niknik76 said:
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
Click to expand...
Click to collapse
Sorry for lag of my understanding, Yes the digitizer is stick with front frame, not a LCD. In my case, I ask the service to change my front cover because it broke and they change the front cover + digitizer.... because it stick together.
Hope this would clear all out.
Hi guys,
i replaced today the broken digitizer of my topaz.
Got one for $60 from ebay, with a screen (i wasn't sure if it was a screen problem or digitizer so i got both.)
you need to unstick the old one from the housing and attach the new one. i didn't use extra glue/stick , since the old one was left on the casing.
cheers
Thanks mistral82cy! Thanks for sharing -now I feel a little more up to going ahead with the operation
Hi! Could you please tell me how much the service center charged you to get the new cover and digitizer installed?
I've to change mine, as well!
Thanks a lot
I would suggest finding the parts list for the phone and finding out exactly what digitizer is needed then buy one online from somewhere such as e-bay. I did this with my G1 replaced it myself and it worked wonderfully. Research before you buy otherwise you might end up buying the wrong one or a clone which doesnt work as well
I dun it myself, buying one digitizer from ebay, getting the old one out was a little tricky , but appart from that it was easy(and i had to do it again, as i dit not secure it properly and there was dust comming underneath the screen from the sides. Any questions you could ask, but it is pretty straight forward.
pistonripper changed his housing, so he would have also replaced his digitizer, so you might want to check with him
http://forum.xda-developers.com/showthread.php?t=572728
If you want to buy one, this would be a good choice
http://cnn.cn/shop/touch-diamond2-digitizer-p-6733.html
replace digitizer on your own!
Hello everyone!
My digitizer broke last week, because i droped my Diamond!
But don't worry I am a rookie in technical things and I managed it to replace my digitizer on my own.
Don't waste money on repair charge from repairshops! Ok... you loose your garantie but the Cellphone is allready old. The new HD2 is already available!
Just buy the digitizerscreen at ebay... i've paid 60 € and then use this manual:
http://www.pdacenter.ru/razborka/htc-touch-diamond2/
Now it works like before.
Bye Ghostina
HTC Pure Digitizer or LCD
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
darkside896 said:
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
Click to expand...
Click to collapse
It's a bit hard to see on the photos but if its new can you not return it? if not then you need to look closely between the digitizer and the screen and see if the damage is just the top layer or the screen, if it is the top layer then just replace your digitizer!
spammer said:
It is easy to do it, if you need, I can send you the instruction that how to change it to you. You can visit my website --spam-- for this product Touch Screen Digitizer For HTC Touch Diamond 2 II T5353
Hope that it will help you.
thanks
Click to expand...
Click to collapse
Every single post of yours is a website promotion.
Chill.
Out.
Seriously.
As always this site is a big help. Just ordered the items, and thanks to the guide I'm fairly confident I will pull it off. For me the bottom 2cm's of the screen have shifted about 1cm to the left somehow. The digitizer still works "perfectly" but it's kinda hard to hit the right buttons like that
Hi. I have a problem with a minor crack on the front glass near the "go back" button. (I've marked it with red line on this picture: http://i51.tinypic.com/10rpybl.jpg )
So my question is what is the cheapest way to fix it? I have been thinking about SGP Glass but I don't like how it looks, however if there is no option to replace just a front glass, I will consider it.
i have the same question,
Is it passable to separate outer glass and LCD ?
on ebay you can find only glass, no connectors, that means it should be passable to separate them, does anyone tried to do so?
I would like to know that also. Anybody has experience with that?
it is possible, i have the same problem...but ideally you should use a special tool to seperate the digitiser (the actual touchscreen bit) from the glass.
and you'll risk breaking your working touchscreen if it goes wrong..
if the screen functions and the crack isn't that big...and if you can't afford to go the whole way and replace the lot....i wouldn't bother (i'm not and i have a huge spider like crack all over my phone.)
I dont think so. Mostly the Touscreen is bound to the Display.
Watch this Video around 2:45. You will see that he nearly destroyes the glass.
watch?v=k6Y6an6D2P | sry can post any Urls yet
But i cant also explain to myself why there are only "glass" sold on ebay
Glass Frame
hi everyone
to answer all your questions YES its possible but in-order to do so you'll have install a copy of the original glass which comes in full meaning the other half the your phone
this has happened to me, my phone slipped from my hand and fall to the floor the glass was shattered so i went to my friend a mobile phone reaper man and got the glass changed only and its was not that bad although there was no samsung logo i chose to install a glass copy because the price of the original is almost half the price of a new I9100
i hope this helps
iMatrix
imatrix83 said:
hi everyone
to answer all your questions YES its possible but in-order to do so you'll have install a copy of the original glass which comes in full meaning the other half the your phone
this has happened to me, my phone slipped from my hand and fall to the floor the glass was shattered so i went to my friend a mobile phone reaper man and got the glass changed only and its was not that bad although there was no samsung logo i chose to install a glass copy because the price of the original is almost half the price of a new I9100
i hope this helps
iMatrix
Click to expand...
Click to collapse
That is exactly what I need to do.... Replace the glass only! I already have the glass but need to figure out how to replace it without damaging the digitizer.
Maybe your friend can help?
The whole glass/digitizer is very expensive!
Please help!
clazaro69 said:
That is exactly what I need to do.... Replace the glass only! I already have the glass but need to figure out how to replace it without damaging the digitizer.
Maybe your friend can help?
The whole glass/digitizer is very expensive!
Please help!
Click to expand...
Click to collapse
This could affect the touch sensitivity badly. If the repair is too pricy for you, use a screen protector so you won't get cuts and save money for repair.
Sent from my digital submersible hovercraft.
A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.
Quick question and i'm sorry if it has been asked before.
My stepdad cracked the screen but the digitizer and the LCD are fine.
My question is, can I replace the glass screen by its-self (as i've seen for sale for $7.00), or is the digitizer and LCD glued to the screen when I take it apart similar to the iPhones.
I'd rather not have to purchase a digitizer and a LCD if i don't have to.
Thanks in advance for the help :good:
Its one unit so you need to buy that for about $185. Its only possible to successfully separate the glass from the digitizer and the capacitive buttons with a machine.
Used notes are priced at about the same as the replacement screen unit.
Worth a try
http://www.youtube.com/watch?v=KV-80zTAfyc
Not really. The hairdryer heats up and damages the lcd while doing a marginal job of softening the adhesive. You will likely overheat the lcd. The buttons are deeply imbedded in the adhesive and are harder to place on the new glass. The adhesive sticker is pretty difficult to place correctly. I have excellent skills, and have replaced many screens (gorilla glass is a poor name choice) and I attempted this but it didn't go so good.
Agoattamer said:
Worth a try
http://www.youtube.com/watch?v=KV-80zTAfyc
Click to expand...
Click to collapse
wow, that's intense!! maybe if it was my phone, i'd try. thanks for the video, but i'm going to tell him to buy a new phone. haha, way too much work for me!
Hello guys & gals,
So as you all may know how fragile this phone is & with the lack of a full surround case (and brains) the top of the phone is essentially asking to be smashed.
So it finally happened, as I was walking, the phone slipped out of my pocket & landed on the pavement, the top right hand portion of the glass is chipped & there's a very small hairline crack on the glass itself, the digitizer itself is fine, however the front glass absorbed the damage causing it to crack & chip, I was wondering if it's actually possible to just heat the front glass, remove it & stick on a new glass like the one available in the link: https://www.ebay.com/itm/Display-To...202764?hash=item3d793f64cc:g:B7oAAOSwhJFb5xgu
Or would I have to go out of my way to get an entire screen & tear down the phone to replace it, there aren't many videos on this phones repair, plus I can only seem to find the front glass. Any information & help will be appreciated.
Here, they sell it the screen
https://es.aliexpress.com/item/Orig...-ctil-digitalizador-asamblea/32916778043.html
Glass repair
Hey
I was looking for the answer to the same question. I went ahead and bought replacement glass off ebay. I'll be giving it a try this evening/tomorrow. I'll let you know how it goes.
Endaemoniada said:
Glass repair
Hey
I was looking for the answer to the same question. I went ahead and bought replacement glass off ebay. I'll be giving it a try this evening/tomorrow. I'll let you know how it goes.
Click to expand...
Click to collapse
Hey were you successful in replacing the glass? I see some on Amazon for $30. I'm in the same boat now. If i have to replace the whole display for several hundred dollars I'd rather just bin the phone and buy a different brand.