Sony Xperia P Bootloader not Boots - Sony Xperia P, U, Sola, Go

Hi !
I have Sony Xperia P with latest JB 4.1.2 work fine .
i check my phone through Service Testing Code and found that my phone is Bootlaoder Unlocked :Yes so i check by powering Off my phione and Press Up kep and power key but it wont Boot into Bootloader menu... how can i Boot my Phone i also check this with volume down button also...:crying:

naeembabakheil said:
Hi !
I have Sony Xperia P with latest JB 4.1.2 work fine .
i check my phone through Service Testing Code and found that my phone is Bootlaoder Unlocked :Yes so i check by powering Off my phione and Press Up kep and power key but it wont Boot into Bootloader menu... how can i Boot my Phone i also check this with volume down button also...:crying:
Click to expand...
Click to collapse
You are confusing bootloader with CWM based recovery.
Unlocked bootloader only means you can install custom kernels not made by Sony.
To have CWM recovery you will need to either, install a stock based custom kernel which already includes the recovery, or root your phone and install recovery.

Good u got me
yeah u r right i am confused becoz i am new to this phone.
oh ! i have JB 4.1.2 so its from sony and my phone is not rooted & cant Boot into that menu is it Right !!!
i also try UnlockRoot Pro software but it Fails to Root My device it reach to 50% & then show fail message ... ???

naeembabakheil said:
yeah u r right i am confused becoz i am new to this phone.
oh ! i have JB 4.1.2 so its from sony and my phone is not rooted & cant Boot into that menu is it Right !!!
i also try UnlockRoot Pro software but it Fails to Root My device it reach to 50% & then show fail message ... ???
Click to expand...
Click to collapse
What is your firmware build number?

ChikeD said:
What is your firmware build number?
Click to expand...
Click to collapse
i think it has latest JB Build Number 6.2.1.100
Kernel version 3.0.8 ...

naeembabakheil said:
i think it has latest JB Build Number 6.2.1.100
Kernel version 3.0.8 ...
Click to expand...
Click to collapse
You can root with DooMLoRD Easy Rooting Toolkit and then install CWM from CWM Recovery 6.0.1.2 for Locked Bootloader.
This CWM recovery has a glitch which won't indicate charging while phone is off. I have fix for Xperia P but it can only be installed if you did not attempt to install that one.
Or
You can flash custom stock based kernel, you can find a few in Xperia P Android Development.
Do you have PC Companion installed?

I have Pc Companion & also install that tool DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit i run it press any key & it install script i think it root my phone then i Run UnlockRoot Pro & Press Root & this Time it Works now its says Root Success !!!
now how can i check my phone is rooted or not any Tip !

naeembabakheil said:
I have Pc Companion & also install that tool DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit i run it press any key & it install script i think it root my phone my ohne is restarts and install Su app ....
Click to expand...
Click to collapse
Start PC Companion repair and wait untill it asks you to turn off the phone and connect it in flash mode (colume down ahile connecting the USB)
At this stage stop PCC and exit it.
Download flashtool and create firmware FTF as expalin here.
This is just to have a backup firmware in case you need it
Try to install my modified CWM for Xepria P. You only need to press volume down once when the notification LED turn on gray.
If you already installed the other CWM I've linked to do not attempt to install this one.

Thanks now i understand little
Hey i change my upper reply plz read it and for Booting in recovery Mode Menu i have to install CWm recovery Tool after rooting ...
and with falsh tool i will backup my orignal JB 4.2.1 firmware & if something wrong i will put it back is it ...
& Without CWm recoery Tool installed i cant boot into recvery mode ??? i am right !!! although phone is rooted !!!
For Rebooting into Recvery Mode i have to Press onyl Volume Down key only or also Press Power key ...
ChikeD said:
Start PC Companion repair and wait untill it asks you to turn off the phone and connect it in flash mode (colume down ahile connecting the USB)
At this stage stop PCC and exit it.
Download flashtool and create firmware FTF as expalin here.
This is just to have a backup firmware in case you need it
Try to install my modified CWM for Xepria P. You only need to press volume down once when the notification LED turn on gray.
If you already installed the other CWM I've linked to do not attempt to install this one.
Click to expand...
Click to collapse

naeembabakheil said:
now how can i check my phone is rooted or not any Tip !
Click to expand...
Click to collapse
Install app that require root, like Greenify, there also Root Checker you can install

I installed Illumination Bar app for Xperia p & it says, before rooting it only runs on rooted phones & Now it also runs i thnk it now rooted !!!!
ChikeD said:
Install app that require root, like Greenify, there also Root Checker you can install
Click to expand...
Click to collapse
so for booting into recoery mode i have to install CWm recoery Tool without this tool it wont Boots ?
& should i Press Volume Down key alone or also press power Button , &during this what should i do with USB should i connect it when i want to boot it or remove usb cable and then Boot into recovery Mode Sorry for my bad English

naeembabakheil said:
Hey i change my upper reply plz read it and for Booting in recovery Mode Menu i have to install CWm recovery Tool after rooting ...
and with falsh tool i will backup my orignal JB 4.2.1 firmware & if something wrong i will put it back is it ...
& Without CWm recoery Tool installed i cant boot into recvery mode ??? i am right !!! although phone is rooted !!!
For Rebooting into Recvery Mode i have to Press onyl Volume Down key only or also Press Power key ...
Click to expand...
Click to collapse
Yes you must install recovery or a kernel that has one built into it to have recovery.
On our Xperia devices it's pressing the volume down key after powering up. Some CWM implementations has LED indication when to press it so one time is enough, other that do not have LED indication you need to press every second or two untill CWM comes up.

Thanks !
Today i learn some basics from u, Thanks very much Time to Sleep
GudNight :good:
I will try these tools
ChikeD said:
Yes you must install recovery or a kernel that has one built into it to have recovery.
On our Xperia devices it's pressing the volume down key after powering up. Some CWM implementations has LED indication when to press it so one time is enough, other that do not have LED indication you need to press every second or two untill CWM comes up.
Click to expand...
Click to collapse

naeembabakheil said:
I
& should i Press Volume Down key alone or also press power Button , &during this what should i do with USB should i connect it when i want to boot it or remove usb cable and then Boot into recovery Mode Sorry for my bad English
Click to expand...
Click to collapse
Actually, if you plug the USB cable CWM will prepare to boot too so you can boot CWM before it switch to charger, once it switch to charger you won't be able to start CWM unless you disconnect the USB cable first.

naeembabakheil said:
Hi
i install everything
DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit to root my phone and also install "CWM Recovery 6.0.1.2 for Locked Bootloader[v1.0][29112012]" and then install Flash Tool and install drivers for sony xperia p .
i tried to flash my phone with another JB firmware 4.1.2 but it wont boot by pressing up key and then insert usb cable , it shows blue light but didnt go into boot mode .
Plz help me what should i do !
i came from here
http://forum.xda-developers.com/showthread.php?t=2450796
Click to expand...
Click to collapse
No need for PMs, just quote or mention me in your post and I'll know you replied.
I don't understand exactly what are you trying to do.
To enter CWM Recovery you need to press the volume down key every second or two after powering up the phone and the Sony logo shows up.
To flash firmware with flashtool you need to press volume down while connecting the phone to the USB while the phone is off.
I would advise against flashing abother formware, at least untill you learn a bit more.
Also, before flashing anything start repair your phone with PC Companion, and then when it ask to power off the phone stop and exit, then create firmware FTF file from PCC files as explained in this article to make sure you have the right firmware for your phone in case something bad happen,
Your bootloader is unlocked so PCC and SUS would not flash it, be prepared.

i have ftf file downloaded from internet
thanks for reply i have same latest firmware JB 4.1.2 downloaded from internet i want to install this firmware on existing firmware JB 4.1.2 using Flashtool.
Here is the Log i copy from Flashtool
26/041/2013 18:41:43 - INFO - <- This level is successfully initialized
26/041/2013 18:41:43 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
26/041/2013 18:41:43 - INFO - You can drag and drop ftf files here to start flashing them
26/041/2013 18:41:48 - INFO - Device disconnected
26/042/2013 18:42:25 - INFO - Selected Xperia P LT22i_6.2.A.1.100_Middle East.ftf
26/042/2013 18:42:25 - INFO - Preparing files for flashing
26/042/2013 18:42:52 - INFO - Device connected with USB debugging off
26/042/2013 18:42:52 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
i have used HTC Desire i root that phone and install recovery .. i just download firmware in .zip format and copy to SD Card and goto CWm recorvy menu and click install upadte from .zip file and my firmware install ...
Can i use same method for Sony Xperia P which i have used for my HTC Desire if Yes
Where can i find that files in .zip so i just copy them to internal memory and install firmawre easily !!!

Why would you want to install it at all if it's not newer than yours and you don't have any problem?
FTF files can be flashed with flahtool only.
Custom flashable ROM zip files are falshed using CWM Recovery.

learn another tip thanks
ok ! thanks one more question .
Does Sony Xperia P comes with ICS from factory ?
i want its orignal firmware and how can i install that orignal firmaware on my current JB 4.1.2 it is possible How ?

naeembabakheil said:
ok ! thanks one more question .
Does Sony Xperia P comes with ICS from factory ?
i want its orignal firmware and how can i install that orignal firmaware on my current JB 4.1.2 it is possible How ?
Click to expand...
Click to collapse
Wjen it first came out it came with GB, mine came with ICS,
You can search for FTF that is compatible with your region or a world one, and flash it with flashtool.
Look for 6.1.1.B.1.75 or 6.1.1.B.1.54, .54 has the 8MP flash bug(not all the picture iluminated)
Exclude TA when flashing if it exist in the file.

That make me confused some came with ICS some with GingerBread
i think i have internal version.
i am from Pakistan . i think here all phones are internal version some i also saw T-Mobile,AT&T etc in 2nd Hand market but in New all are international versions.
Here is my phone pic attached !!! :highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

[TUT][NEO V ] Flashing, Rooting, ADB drivers, ClockWork-Mod Installation

1) Installing ADB Drivers
Download the ADB drivers extract them
ADB Driver download RE UPLOADED
See attachments
Plug phone to PC
Cacnel automatic Driver installation
Go to My computer > Manage > Device Manager > Click on your Phone will be named "SEMC USB HOST" or something
*You'll get SEMC USB host
Im getting the ADB device as i've installed drivers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tehn doubled click the device and hit
"Update Driver"
Then browse to the selected directory where you extraced the ADB drivers
2) Rooting
OFF TOPIC : New firmware available 4.0.2.A.0.62DO NOT UPDATE TO THIS FIRMWARE MANY USERS ARE REPORTING ROOTING PROBLEMS
Thanks for the heads up Vimjam
ORIGINAL THREAD AND CREATOR IS DOOMLORD
Thank him HERE
Download THIS *Rooting Files
LINK
And extract it
Connect your Device to PC
Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
(6) skip "PC Companion Software" prompt on device
And then Run "runme.bat"
Then Hit key " 1 "
Wait for a while
And you are now rooted
Credit- DOOMLORD
3) Installing ClockWorkMod Recovery 5.0.2.6
Works on Locked Bootloader
Download these files
LINK
Before u begin:
(1) Increase screen timeout to 10 minutes
1. Extract the above files
2. Browse to the Folder
3.Enable USB Debugging on device
4.Connect your device using usb data cable
5. Run " install-cwm1.cmd" for Neo V
6.Follow on screen instruction
Notes to everyone:
Do NOT use this recovery if you are not in Stock 2.3 firmware.
TO enter CWM
When your phone boots, repeatedly press the volume down button
After a while you will be greeted with a cyan coloured screen
BUTTON BEHAVIOR ON NEO V
Credit- Vinjam
back button : back
home button : select option
menu button : scroll down
volume up/down : scroll up/down
Credits for CWM go to "Nobodyatall"
4) FLASHING KERNELS/ROMS
This option will require your phone have its BOOTLOADER UNLOCKED
REFER TO THIS THREAD FOR HELP AND Q&A ON BOOTLOADER UNLOCKING
LINK
What is Fastboot ??
Fastboot is protocol used to update the flash filesystem in Android devices from a host over USB. It allows flashing of unsigned partition images.
Download Fastboot HERE
LINK
A)Flashing a Kernel
1.Download the above Fastboot files
2.Extract the files
3.Connect device in Fastboot mode
a. Power off device
b. Continuously press the Menu buttong
c. Then insert USB cable and connect to PC
*Do not leave button yet !!!
d. You will notice the LED light as blue
*You can now leave the button
Download Kernel for your Neo V
*Search the Xperia Neo Android Development Forum
Download the Kernel file
It will be named "boot.img
Copy this file to the Fastboot folder
Like this
Then press the "Shift button" and simultaneously press the "Right mouse click"
and then click "Open Command Prompt Here"
then type this in the CMD
" fastboot flash boot boot.img "
Let fastboot do its magic
Wait for a while
Then when the installation is over
Disconnect your device and Power it on
Congratulations you have installed a custom Kernel
B) Installing a ROM
A Rom usually come as "Update.zip" file
Download a compatible ROM for your device
*Search the Xperia Neo Android Development Forum
Copy the Update.zip to the root of your SD CARD
Power OFF device
Now Power ON device
Boot into CWM
Press the volume down button at boot
While in CWM
1) Wiping Cache Partition
Scroll down to "wipe cache partition"
And press Menu button
then scroll down to "Yes" and again press Menu button
2) Wiping Dalvik Cache
Scroll down to "Advanced"
Press Menu button
Then scrool down to "Wipe Dalvik Cache"
Press Menu button
Then again Scroll down to "Yes- Wipe Dalvik cache"
3)Wiping Data
Scroll down to "Wipe data/factory reset"
Press Menu button
Then scroll down to "Wipe data/factory reset"
Press Menu button
Then to flash the ROM
Scroll down to "Install zip from SD card"
And then Browse for "Update.zip"
Which you extracted in the root of SD card and select it
Then Install it
Congratulations you have installed a custom ROM
All credits go to the Creators of the programs and methods used to Root, Flash, Clockwork Mod etc
I have only compiled all this into one thread
Do not blame me if you mess up your device etc
EDIT: I shall fine tune this thread by addding more pictures and videos soon
Sorry, I have no idea how this works for Neo V, and I think I need to follow your guide for ADB drivers myself first
Nice...
10chars
keep up the good work man +1 ...it is good to see improvements in NEO V development
Gud to see a Separate section for Neo V
Hurray!!! Finally a separate section for Neo V.......I hope more Developments Come in and Thanks everyone for Voting
Adb driver mediafire link looks dead..Can you repost a new one, am in the process of rooting my neo V. THx
mediafire link for adb driver is dead
please reupload it
thanks for separate thread for neo v
ramdante said:
Adb driver mediafire link looks dead..Can you repost a new one, am in the process of rooting my neo V. THx
Click to expand...
Click to collapse
anil4523 said:
mediafire link for adb driver is dead
please reupload it
thanks for separate thread for neo v
Click to expand...
Click to collapse
Sorry
Re uploaded them
See attachments
can someone help me out here..im a newbie..just want to know something before doind the above thing.. since there is a way of installing Clockwork mod recovery in Locked Bootloaders then what is the use of it when we are unable to flash a custom rom nor a kernel in locked bootloader..so basically my point is what are the uses of CWM in locked bootloaders
chiujiewei said:
can someone help me out here..im a newbie..just want to know something before doind the above thing.. since there is a way of installing Clockwork mod recovery in Locked Bootloaders then what is the use of it when we are unable to flash a custom rom nor a kernel in locked bootloader..so basically my point is what are the uses of CWM in locked bootloaders
Click to expand...
Click to collapse
ONLY point IS backup, restore your stock rom
Cheers.
Hey man, I have followed your guide to root my friends Neo V and it works! I successfully rooted the phone. There is one problem though, upon installing ClockWorkMod Recovery, I can't seem to see a message that it's successfully installed? See attachment. After that when I am trying to browse for a ROM in ROM manager it still prompt for a CWM recovery for install, and I can't even see the device Neo V in there? I really can't figure it out.
Thanks.
rom manager wont recognize our CWM , to check if you've installed CWM correctly , switch off your phone ,switch it on and start pressing the volume down button repeatedly untill you see CWM.
taaviu said:
ONLY point IS backup, restore your stock rom
Cheers.
Click to expand...
Click to collapse
oh i see..in CMW there is install zip from sdcard option..then can we install theme or battery pecentage mod ,transparent statusbar in CWM with locked bootloaders?
or i have to unlock the bootloader in order to install zip from sd card..nothing will happen to the phone right?m just so confusd :SS
i am newbee to neo v
i had installed adb drivers as per tutorial
i want to install cmw without unloacking bootloader and without rooting my phone
my phone is on stock rom 2.3.4 build no. 4.0.2.A.0.42
i had done installation of cmw as per tutorial but i had following result
please help to install cwm recovery
Pretty sure rooting is a must.
edit:
http://forum.xda-developers.com/showthread.php?t=1364509
Yep, needs root.
anil4523 said:
i am newbee to neo v
i had installed adb drivers as per tutorial
i want to install cmw without unloacking bootloader and without rooting my phone
my phone is on stock rom 2.3.4 build no. 4.0.2.A.0.42
i had done installation of cmw as per tutorial but i had following result
please help to install cwm recovery
Click to expand...
Click to collapse
Impossible to do
Root your Neo V
It's no big of a deal
You can unroot if you want btw
Help , I can't install ADB Drivers , It Says that the Driver is Latest Update ...
Sent from my MT11i using xda premium
Boyho said:
Help , I can't install ADB Drivers , It Says that the Driver is Latest Update ...
Click to expand...
Click to collapse
Someone correct me if I'm wrong but doesn't that mean you already have those drivers installed?
But My Drivers are From The Original PC Companion Is it ADB Driver ?
Sent from my MT11i using xda premium
So is my Driver that it Automatically installed using PC Companion ADB Drivers?

{roms}-{kernel}-{bricking}-{customization}=all in one thread for xperias

THREAD OVERVIEW
Post 1 : ROMS FOR XPERIA MINI
Post 2 : ROMS FOR XPERIA MINI PRO
Post 3 : ROMS FOR XPERIA LIVE WITH WALKMAN
Post 4 : ROMS FOR XPERIA ACTIVE
Post 5 : COMMON ROMS
Post 5 : CUSTOM KERNEL
Post 6 : BRICKIG AND SOLUTION
Post 7 : CUSTOMIZATION
NOTE :
you can port any rom from other devices because XMP, XM and LWW brothers. and that is why we are in theard the same. porting means just, replace a few files. So you can do it Replace the hw_config, sensors.conf, copy smultron touch hex firmware file /etc_firmware/ and DELETE mango hex's, and edit the build prop /just replace all sk17 and mango or mini pro lines/. And this is all. Flash the mini kernel and install the rom.but for XMP, you must replace the "usr" to the physical keyboard and some file for the adjustment.
thanks to kamarush
BEFORE WE START THERE ARE SOME REQUIRMENTS TO FLASH A ROM AND KERNEL SUCH AS..
{1}.YOUR Bootloader MUST BE unlocked.I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
THERE ARE TWO WAYS OR METHODS OF UNLOCKING BOOTLOADER...
(1).OFFICIAL WAY:http://unlockbootloader.sonyericsson.com/
(2).TEST POINT METHOD:http://forum.xda-developers.com/showthread.php?t=1285285
YOU WILL VOID YOUR WARRENTY IF YOU UNLOCK YOUR BOOTLOADER...
....YOU CAN FIND MORE INFORMATION ABOUT UNLOCKING BOOTLOADER ON ABOVE LINKS....
{2}.YOU MUST BE ROOTED AND HAVE CMW(ClockWorkMode) INSTALL ON YOUR PHONE
HOW TO FLASH CMW IS GIVEN HERE:http://forum.xda-developers.com/showthread.php?t=1345741
BEST WAY TO HAVE ROOT AND CMW IS TO FLASH CUSTOM KERNEL.
IF YOU HAVE ABOVE THINGS THEN YOU ARE READY TO GO...
...TO FLASH CUSTOM KARNEL YOU WILL NEED FLASTOOL:http://forum.xda-developers.com/showthread.php?t=1351309....
POST 1
ROMS FOR XPERIA MINI
1.MiniCMSandwich AOSP Android 4.0.3 RC2:http://forum.xda-developers.com/showthread.php?t=1434001
2.Flush78_v6S:http://forum.xda-developers.com/showthread.php?t=1423058
3.Clean 'n' Tweaked - v4.1:http://forum.xda-developers.com/showthread.php?t=1417621
4.ST15i (Mini) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439293
POST 2
ROMS FOR XPERIA MINI PRO
1.NeroDroid ROM v5:http://forum.xda-developers.com/showthread.php?t=1458963
2.Lewa OS:http://forum.xda-developers.com/showthread.php?t=1462678
3.SK17i (Mini Pro) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439298
POST 3
ROMS FOR XPERIA LIVE WITH WALKMAN
1.XROM™ v1.4:http://forum.xda-developers.com/showthread.php?t=1538083
2.WT19i (Live with Walkman) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439311
3.MIUIv4 beta 2 build 2:http://forum.xda-developers.com/showthread.php?t=1490166
4.[IPHONE-STYLE]Joy os:http://forum.xda-developers.com/showthread.php?t=1540755
POST 4
ROMS FOR XPERIA ACTIVE
1.Spartan Rom V1.8.5:http://forum.xda-developers.com/showthread.php?t=1375991
2.ST17i (Active) 4.0.2.A.0.42:http://forum.xda-developers.com/showthread.php?t=1310292
POST 5
COMMON ROMS
1.CM7.2.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1226715
2.CM9.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1445821
3.HYBROM v16:http://forum.xda-developers.com/showthread.php?t=1373435
4.MIUIv4 2.3.16:http://forum.xda-developers.com/showthread.php?t=1554996
5.Xperia UXP NXT:http://forum.xda-developers.com/showthread.php?t=1520456
6.ExMIUIv4 2.3.30-r1:http://forum.xda-developers.com/showthread.php?t=1578109
7.MiniCMSandwich AOSP Android 4.0.4 RC3:http://forum.xda-developers.com/showthread.php?t=1434001
POST 6
CUSTOM KERNEL
1.[Mini/MiniPro/LiveWithWalkman/Active] Rage Kernel v2.6:http://forum.xda-developers.com/showthread.php?t=1398910
2.KRsH Kernel v3.0 (MiniPro):http://forum.xda-developers.com/showthread.php?t=1349630
3.[Mini/MiniPro/LiveWithWalkman/Active] X kernel 2.6.32.58 ZRAM:http://forum.xda-developers.com/showthread.php?t=1451150
4.NeroDroid Kernel(FOR NERODROID ROM):http://forum.xda-developers.com/showthread.php?t=1458963
5.b KERNELS(FOR SK17i-ST15i-WT19i):http://forum.xda-developers.com/showthread.php?t=1440161
6.KRsH Kernel v3.0 (Mini):http://forum.xda-developers.com/showthread.php?t=1351709
POST 6
BRICKIG AND SOLUTION
...I BRICK MY XPERIA MINI TWISE AND I MANAGE TO SOLVE IT..I AM ADDING THIS POST BEACAUSE I KNOW HOW IT FEELS WHEN YOUR MOBILE BRICKED..
{1}.IF YOU HAVE UNLOCK BOOTLOADER AND YOU ACCIDENTALLY RECEIVE FOTA THEN YOUR XPERIA WILL NOT START IT WILL JUST VIBRATE.
FOR SOLUTION GO HERE:http://forum.xda-developers.com/showthread.php?t=1126358..
{2}.IF YOU ACCIDENTALLY FLASH ANOTHER MODELS ROM ON YOUR PHONE..AND IF YOUR TOUCHSCREEN DOES NOT WORK
THEN GO HERE FOR SOLUTION:http://forum.xda-developers.com/showthread.php?t=1423562
{3}.NEXT TIME WHEN I BRICK MY MOBILE AND I ABLE TO FIND SOLUTION THEN I WILL POST HERE...
POST 7
CUSTOMIZATION
I AM ADDING THIS POST FOR THOSE WHO DONT WANT TO UNLOCK BOOTLOADER..
THAT MEANS TO CUSTOMIZE YOUR XPERIA YOU DONT NEED TO UNLOCK BOOTLOADER..
BUT YOU WILL NEED ROOT ACCESS AND CMW INSTALL ON YOUR MOBILE..
FOR THOSE WHO WANTS CMW WITH LOCK BOOTLOADER GO HERE:http://forum.xda-developers.com/showthread.php?t=1437840
THERE ARE PLENTY THREAD BUT I AM ADDING SOME OF THEM..REST YOU CAN CHECK IT OUT BY YOURSELF..
SO LETS GET STARTED..
1.Customizable Quickpanel, Flashlight toggle:http://forum.xda-developers.com/showthread.php?t=1306044
2.Xperia S v1.7:http://forum.xda-developers.com/showthread.php?t=1503570
3.IceCream Sandwich Xperia V4.0:http://forum.xda-developers.com/showthread.php?t=1453698
4.SE Mix ICS v4:http://forum.xda-developers.com/showthread.php?t=1482244
5.All In One-Live/Mini/Mini Pro/Active:http://forum.xda-developers.com/showthread.php?t=1404786
6.HTC Sense Theme:http://forum.xda-developers.com/showthread.php?t=1546345
If there is anything that I missed please send me a PM to have it added. Please provide a link in the PM, thanks.
If I helped you in anyway, please say thanks!
You should also post links to the stock kernels for the latest f/w's..... ;-)
amey2606 said:
you should also post links to the stock kernels for the latest f/w's..... ;-)
Click to expand...
Click to collapse
your request has been granted..
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
akshay13071990 said:
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
Click to expand...
Click to collapse
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
ramezzidane said:
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
Click to expand...
Click to collapse
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
akshay13071990 said:
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
Click to expand...
Click to collapse
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
ramezzidane said:
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
Click to expand...
Click to collapse
sorry dude i have tell you what i know..i cant help you..
i hope you will solve your problem in future..
try to go to service center and tell them your problem...
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
TA stands for TrimArea.....
http://forum.xda-developers.com/showthread.php?t=1126358
Ask Bin4ry about it..
He knows better.....
nice thread akshay keep it up
metalrawk said:
nice thread akshay keep it up
Click to expand...
Click to collapse
thanks..
thanks any way
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
ramezzidane said:
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
Click to expand...
Click to collapse
that is a great news..and best of luck with your new born live with walkman
akshay13071990 said:
that is a great news..and best of luck with your new born live with walkman
Click to expand...
Click to collapse
thanks dude
akshay13071990 said:
THREAD OVERVIEW
I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
Click to expand...
Click to collapse
Witch rom Can I flash with locked bootloader then?
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
Just stock rom, no more.
Sent from my SK17i using xda premium
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
all in one:http://forum.xda-developers.com/showthread.php?t=1404786
this is a kind of a rom..it changes all things..but dont have any script..but you can try rom toolbox pro from android market it has many features like sd card read speed font change,boot animation change..to do all this you need only root and cmw install...without unlocking bootloader...isnt it great.so if you want then try it..
I already mod my sk17i this way,only thoud there is something else I can do with it.Thanks any way.

Did i Bricked my Xperia mini St15i - no Touch anymore

Hello Evrybody
i have a huge Problem with my ST15i
I had Rooted GB on it and evrything works fine till i decided to try a custom ROM
so i instal Recovery Tool and installed a Custom Rom for ST15 i
after installling and rebooting to the new rom, i noticed when i tried to open the screen lock bar that the touchscreen didnt react exactly - i had to slide at the other side of the display to unlock it!
So i decided to make the phone fresh with SEUS and ICS4.0! After SEUS update i restarted my phone and the whole touch display didnt work anymore!
only the hardbuttons - i cannot back to any Recovery tool , with out touch display i cant switch to uUSB Debug Mode!!
Is there hope to help my Phone!!
Thx in Advatage!!
Hi,
This means you installed custom rom and it didn't work? And then you connected your phone to pc and used seus while you were on custom rom? You did not flash original sony from back first and updated (or tried to update) while you were on custom rom?
Have you tried to use flashtool? I don't know if your touchscreen has bricked up completely, but you could flash gb firmware back, so you have a clean gb rom.
For this download sony flashtool from here and install it. You go to the drivers section of the flashtool folder on your computer and install them. Then you download the 4.0.2.A.0.42 rom (for SK17i) rom from here and move it to the firmware folder of flashtool on your pc. Then you start flashtool and click on the flash. You select flashmode and then you select the 4.0.2.A.0.42 rom and click ok.
Then you turn off your phone (make sure it is over 50% charged) and hold volume down key. Then you plugin the usb cable to pc and smartphone while holding volume down. It should flash the original gingerbread rom.
If the flash finished you can hope that the touchscreen workd, if not I don't know a solution.
BUT: I DONT TAKE ANY RESPOSIBILITY FOR THIS METHOD!!!
If it has worked you can be lucky, if not you are on non-rooted gingerbread rom and could bring your device to the service, but I'm not sure!
OR: First read this thread cause he has similar problem!
Best regards
Michael
i managed it already to install androis SDK on pc and ADB Drivers - via Fastboot i can reach the Device and Bootloader seems to be open, the blue led is wworking, windows accepts my phone as installed android ADB Device - and when i try with Flashtool, and some other different tools to flash new kernel - i always become the mesagge ithe device must be rooted even from fastboot when i use the (fastboot flash boot boot.img) command
I will try some other things , when this does not helps so i try with service
THX
But led is working anyway, it doesn't say, that the bootloader is unlocked. Maybe really flash the 4.0.2.A.0.42 firmware using flashtool and then try if touch works, otherwise bring device to service, but I don't know if they can notice your try to install a custom rom.
Hope it will work for you!
Marethno said:
Hello Evrybody
i have a huge Problem with my ST15i
I had Rooted GB on it and evrything works fine till i decided to try a custom ROM
so i instal Recovery Tool and installed a Custom Rom for ST15 i
after installling and rebooting to the new rom, i noticed when i tried to open the screen lock bar that the touchscreen didnt react exactly - i had to slide at the other side of the display to unlock it!
So i decided to make the phone fresh with SEUS and ICS4.0! After SEUS update i restarted my phone and the whole touch display didnt work anymore!
only the hardbuttons - i cannot back to any Recovery tool , with out touch display i cant switch to uUSB Debug Mode!!
Is there hope to help my Phone!!
Thx in Advatage!!
Click to expand...
Click to collapse
to fix your problem:
flash stock firmware via flash tools
flash a custom kernel and flash that custom(that you had problem with)
flash stock firmware again
i had your problem and i fixed it.
so... 100%working
fixing
scorpion 13 said:
to fix your problem:
flash stock firmware via flash tools
flash a custom kernel and flash that custom(that you had problem with)
flash stock firmware again
i had your problem and i fixed it.
so... 100%working
Click to expand...
Click to collapse
what if on 4.0.4 rom so i need to reflash same custom firmware(problem)

[Q] xperia ray stuck at sony logo cannot enter cwm rooted bootloader unlocked

guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
flash kernel usiing fastboot (not flashmode)
download this, then extract. (u need to have Android sdk installed, if not search google & install) http://www33.zippyshare.com/v/22861267/file.html
1. pur kernel into the fastboot folder
2. power off device. press & HOLD vol up button when u cannect to pc. the blue led should lit. leave phone
3. go back to fastboot folder click in empty space, then hold 'shift' & press right mouse button --> ''open console here''
4 now u should have a black box (cmd)
5 type ''fastboot flash boot boot.img'' (without quotes, & remeber the red text is the name of the kernel may u have to rename it)
6. fast boot should tell u all done, ok.
7. boot in CWM
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
download flash tool and install it ...
switch off phone
connect the usb to pc and phone by holding volume up key NOW blue led light up...u can see flash tool notify that device connected in fastboot mode..
Now press the lighting key select fastboot ...then select kernel to flash...
DONE...
Note: phone driver must be installed

Bricked M4 Aqua E2303 pls help me

i was wished try to new kernel v5 i flashed img with twrp but unfortunelly my system deleted and my kernel too
i can charge with recovery but i can't charge when phone turn off and won't turn red led and i can't boot with flashmode or fastboot please help me
edit: i think i need twrp backup pls help me
advancel said:
i was wished try to new kernel v5 i flashed img with twrp but unfortunelly my system deleted and my kernel too
i can charge with recovery but i can't charge when phone turn off and won't turn red led and i can't boot with flashmode or fastboot please help me
edit: i think i need twrp backup pls help me
Click to expand...
Click to collapse
You must be Flash another version Like V3 of this kernel with FastBoot or Flashtools
Sorry no longer possible cause as if the kernel was disabled. Not working
EHSAN™ said:
You must be Flash another version Like V3 of this kernel with FastBoot or Flashtools
Click to expand...
Click to collapse
Sorry no longer possible cause as if the kernel was disabled. Not working
Try to install firmware with Flashtool "Emma" from Sony.
jtg01 said:
Try to install firmware with Flashtool "Emma" from Sony.
Click to expand...
Click to collapse
Sorry My phone don't get in flashmode and fastboot and do not charging while turned off i have only running firmware and recovery
advancel said:
Sorry My phone don't get in flashmode and fastboot and do not charging while turned off i have only running firmware and recovery
Click to expand...
Click to collapse
Have u tried to do a repair in Sony companion?
Sonyfanatic said:
Have u tried to do a repair in Sony companion?
Click to expand...
Click to collapse
Yes it said to me "get in to flash mode"
advancel said:
Yes it said to me " in to flash mode"
Click to expand...
Click to collapse
Actually I had this problem with my Xperia s. I managed to remove everything but recovery. So here's what I did. Start Sony companion and go to the repair page. When it says plug in and hold down I think it's volume down key. Plug the phone in to the computer. Now it's a waiting game. But if you r lucky the red light should come on after like 10 min or so. If it does wait another ten just so the phone has some battery fueled up. Then plug it out and in again holding the volume key pushed. If this doesn't work just flash cm so you can get in to the phone. Lock the bootloader again and then try Sony companion with cm installed. Oh you don't have to hold volume key the first time
1. Flash boot and system images with TWRP: https://forum.xda-developers.com/m4-aqua/development/rom-6-0-1-xperia-m4-aqua-t3423264
2. Turn off your phone
3. If phone enter fastboot and flashmode go to step 1A, if not, go to step 1B
1A. Flash stock rom with selected "APPS_LOG" and "USERDATA"
1B. Go to recovery, and restore this backup: https://app.box.com/s/6okdn3wafe6mh3y4yhfe451nm0hwasah (if again not boot go to step 1C)
1C. Buy M4 Aqua with broken LCD or digitizer, swap mainboard.
ps. sorry for my English, i from Poland

Categories

Resources